So my girlfriend's phone, a Huawei Y625 after she took the battery (I suspect during an update but she doesn't know) got soft bricked, all I get when I turn the phone on is a DataBackup screen and multiple processes failure notifications.
I tried to wipe/factory reset but I'm still greeted by the same screen and errors.
I tried installing an update rom from the website and some I found online but I get an error saying: "cannot install this package over newer build" so I tried to edit the date on the build.prop file but then I get a signature error.
The phone is not rooted and I would prefer not to have to (but I really don't care that much).
Also the screen glass is cracked so they gave her the bull**** "no warranty because of damage" excuse.
Could someone please help?
Related
Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE. :crying::crying::crying::crying:
My email is : kaahm.s @ hotmail.com
Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE.
My email is : kaahm.s @ hotmail.com
Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE.
My email is : kaahm.s @ hotmail.com
Hi, folks - my first post on XDA, and boy do I need help.
Short version, it seems like my Tab4 7'' might be bricked - I've got a "Firmware update encountered an issue" yellow triangle when I tried rooting it and Odin decided to crash three seconds in and can't get past it. The tablet isn't recognized in device manager anymore, with a "A request for the USB device descriptor failed." and KIES keeps trying to connect to it, but without effect.
Digging around online gave me contradictory, vague and often out-of-date results - most of them recommend using Odin to reflash it with a stock image {which I may or may not have}, but when I try to, it waits at SetupConnection.
Any ideas? I have a replacement plan for it, but I'd rather not cash it in unless I have to.
Hello Everyone,
So I had this message on my huawei y625-u32 screen saying:"Encryption Unsuccessful", telling me that I had lost all my data and that I have to "Reset Phone" to have my phone working again. Though it didn't after doing that, and it kept showing the same error when booting.
I have already tried putting update.app file in a folder named dload and put on an sd card and try to install it from there using the recovery mode. But, again, the same message.
Before this happened, the phone was rooted using "KingoRoot" (not"KingRoot") and I had supersu app installed, and this error just showed up one day when I was using a root app after a sudden shutdown.
Question: Is there anything I can do to fix this?
Hello Anybody home
forum.gsmhosting.com/vbb/f929/guide-unbrick-flash-y625-u32-encunsuccess-9008-a-2122973/
rare files for y625-32-version-b109
forum.gsmhosting.---------------------com/vbb/f929/huawei-y625-u32-version-b109-firmware-available-2238751
just remove dashes
I almost was going to give up before i found it, It's not subjected to this thread but for the people who pass here searching for c328b109
Samsung Galaxy S8
Same Problem with Y625 error
So today a customer brought Huawei with this massage encryption unsuccessful and can of confuse.
Hello developers,
A friend of mine was using a Huawei P10 Lite (WAS-LX1A). After an OTA Update errer, the phone was running quit ****. It was laggy af, Battery was nearly empty after a view hours and much more other bugs. I flashed my Huawei P7 multiple times (30-40 flashes) and my Galaxy SIII with LionageOS was also still working untill hardware crash becouse i dropped the Phone on the street. After installing ADB and Fastboot, i wrote down the Speccs of this phone to get an unlock code from tech support. Bootloader was successfully opend, and now, im lost. Huawei eRecovery show up "Download latest version and recovery". Using this method shows up an error "Unable to recieve Device information" or something like this. it seems i lost my ADB Access, "ADB Devices" seems empty and windows is playing a sound when Plugin/out the phone from USB. Currently im unable to handle this problem, i dont know where the problem is, it seems there is no system/OS running on the device. The phone is booting endless in two screens. The 1st one is the "Your phone can not be trusted" screen wich is the result of unlocked the boot loader. The 2nd screen is Huawei eRecovery what is useless, i only can reboot and shutdown. Recovering doesnt work.
What u also need to know: I lost the unlock code, speccs and other informations abbout this phone so bootloader is unlocked, hopefully this is no major problem.
This of has NO ROOT. Only opend bootloader and a bricked OS. There is no TWRP or other stuff installed!
Hopefully there is a way to install TWRP and a OS or maybe back to stock rom. I dont care wich one if the phone works again.
BlitzlichtHD said:
Hello developers,
A friend of mine was using a Huawei P10 Lite (WAS-LX1A). After an OTA Update errer, the phone was running quit ****. It was laggy af, Battery was nearly empty after a view hours and much more other bugs. I flashed my Huawei P7 multiple times (30-40 flashes) and my Galaxy SIII with LionageOS was also still working untill hardware crash becouse i dropped the Phone on the street. After installing ADB and Fastboot, i wrote down the Speccs of this phone to get an unlock code from tech support. Bootloader was successfully opend, and now, im lost. Huawei eRecovery show up "Download latest version and recovery". Using this method shows up an error "Unable to recieve Device information" or something like this. it seems i lost my ADB Access, "ADB Devices" seems empty and windows is playing a sound when Plugin/out the phone from USB. Currently im unable to handle this problem, i dont know where the problem is, it seems there is no system/OS running on the device. The phone is booting endless in two screens. The 1st one is the "Your phone can not be trusted" screen wich is the result of unlocked the boot loader. The 2nd screen is Huawei eRecovery what is useless, i only can reboot and shutdown. Recovering doesnt work.
What u also need to know: I lost the unlock code, speccs and other informations abbout this phone so bootloader is unlocked, hopefully this is no major problem.
This of has NO ROOT. Only opend bootloader and a bricked OS. There is no TWRP or other stuff installed!
Hopefully there is a way to install TWRP and a OS or maybe back to stock rom. I dont care wich one if the phone works again.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946 this method will lock your bootloader...
Ty so much, this solved my problem. phone is nearly new now.