Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE. :crying::crying::crying::crying:
My email is : kaahm.s @ hotmail.com
Related
i have lg gt540 and while updating to 2.1 with kdz tool the pc crashed now i cant turn on the phone...i hope some one help me with that
Have you tried updating again?
the problem the the phone dont open when i press power button there is nothing
what about when plugged into pc?
first thx for replying but there is nothing when i connect it to pc i think it needs abootloader.i hope u answer me
im afraid im pretty new to android ( gt540 is my first smartphone ) but anytime i updated, everything went ok, in fact yours is the first time i heard of a crash while updating so i cant give you much info but your in the right place, im sure the devs can figure something for you. just try remove the battery and then plug into your pc. and its not a problem replying just wish i could help.
well, did you try with the battery removed?
yes i did nd there is nothing
plz any one help in that
plz some one tell me how to make abootloader to it i have another lg gt540 i want to know if i can use it to repair the bootloader for this dead phone
The problem is theres noway u can acces inside the phone memory to patch bootloader. Go to lg waranty and tell them this happened when u were updating phone, dont tell them that pc crashed, tell them u updatet through lgsupport tool too, not through kdz updater they should fix it for u.
Sent from my GT540
thx for replying i will call them tomoorow i hope they will fix it for me... i want to ask if some one has passed with the same problem b4
Goto Emergency Mode, and upgrade from KDZ program. In KDZ program, you must setting Phone Mode to CS_Emergency. And flash agan.
i sent them email about the problem and this was the reply
Thank you for your email regarding this issue.
Unfortunately due to the nature of this issue, you will no longer be able to finish the update service. In this case you would be required to return to ourselves for servicing. To action this please contact the number below with your reciept and handset to hand.
If you have any further queries, please do not hesitate to contact us again.
Best regards,
LG Electronics UK Helpdesk
can any one tell me what should i do
Remove battery press volume - or + I can't remember try two options, then plug in usb.
You should see blue screen with DOWNLOAD or EMERGENCY MODE text.
i tried all keys combination nothing work
my mobile internet went dead after flashing quarx rom (I did it wrong btw...), but everything else worked fine.
I couldn't get mobile internet back on track no matter what (it was disabled in quick settings when I flashed quarx), I even tried factory reset and flashing the baltic rom. during the flashing, the kdz updater gave me an error close to the end, and my phone became stuck at the android screen.
even though I have CWR installed, so I could flash it again, I sent it to LG claiming I was updating through their website and since my phone doesn't start. I didn't tell them anything about the mobile internet not working. Hopefully they'll clean the phone completely and that will fix it.
I'll be picking up my phone after work today, I'll let you know how it went.
Same thing Happened to me n almost **** my pants for killing my brand new phone..
follow these steps
1. volume +or-(i dont remember) +camera n power on. it should turn on n say downloading mode.
2. update( you can use kdz updater, it probably wont crash this time but even if gets stuck just w8 for it)
3. after updating, remove the usb cable n turn on the phone, hopefully it would work
4. ENJOY ( N THINK TWICE BEFORE EFFING WITH THE PHONE, )
i am not sure about the keys for emergency/downloading mode(i think it was vol-) GOOGLE IT IF KEYS DONT WORK.
Put to microwave on 2 sec without battery and send do service
my service provider fixed my phone in 3 days without any issues, they flashed the t-mobile branded 2.1 on it. went home and now I have the open europe with fastboot and cwr.
so if all else fails, just send it to LG or your provider.
cheers!
Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE.
My email is : kaahm.s @ hotmail.com
Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE.
My email is : kaahm.s @ hotmail.com
Sorry for the possible errors in the writing, but as I have a basic english, I used google translator, and he sometimes modifies a little the text. Let's go to the point.
Guys, is the following. I changed the ROM of my android (LG Optimus L3) to CM9, but its bugs were bothering me, and then I decided to change. In that exchange,I ended up installing a ROM worse, she was not stable, full of errors, and then decided to return to the original ROM. Was in exchange ROM process that started the problem.I was trying to install the firmware V10D, and the KDZ was reporting error, but the tutorial I used said that this was normal error information and that I do not disconnects the phone from the computer until "FINISHED" appears on the KDZ, but I stubbornly and much IDIOT in subject withdraw before the hour and then tried the process again (I THINK THIS BROUGHT ALL THAT PROBLEM).
In another attempt appeared the same error message in KDZ but I wanted to wait and let the process going on the computer and went to the kitchen (I say this just to you know out that might have appeared some warning, but I did not see) when I returned the phone was off, I saw that the KDZ had the phrase "finished" then disconnected the phone, he was ready already "broken" tried and tried but he did not call, I connected the phone to the computer again but no signal, remove battery, I tried to get into "emergency mode", tried the hard reset but it just did not work. Will the process badly done by me blew the motherboard? HELP ME, PLEASE. :crying::crying::crying::crying:
My email is : kaahm.s @ hotmail.com
Hello guys.
I have an LG L5 (E610) that is having a very strange behavior.
It started by throwing a lot of ANR with different applications (Google Play Store, Play Services, Facebook, and others).
So, seeing this, I decided to do a factory reset. After reboot, what is my surprise that I see everything as I had before. All the applications, all the data, everything.
With this, I tried almost everything at the moment. And by saying that, I mean:
- Tried to follow the key combination for the recovery, it goes to recovery, I see the Android and some progress bar moving, but after the reboot, the system remains with no change;
- When on the system, I uninstall applications, they seem to be uninstalled, but after a reboot all the applications are back.
- Tried to root the phone with more than one process, no success. I cannot install any application. Not via play store, not via adb install, there is no way;
- Tried to flash a recovery img, to try to clean cache partition from there, no luck. From Fastboot it says everything went well, but when I reboot, everything is the same;
- In fastboot, I tried to erase cache and userdate partitions, no luck. When I try, i have a message saying "FAILED (status read failed (Too many links))". This happens with all the partitions. I even tried to erase the system partition, and I have the same response. Strange thing is that after this error, the phone reboots and goes directly to the system;
- Tried with KDZ images and tools to install different versions, I receive errors during the deployment and at the end the phone reboots. Again, the same system is installed as before. No changes.
As of now, I was trying to understand if there is any problem with the internal flash system. Maybe it is corrupted and is causing all these issues.
The thing is, as the phone is not rooted, I cannot launch a e2fsck to the maybe faulty mmcblk0pXX
The phone has a stock ROM based on Android 4.0.3 (build IML74K / LG-E610-V10e-JUN-30-2012)
I am out of ideas, I've looked around here at XDA, Google and I have no other ideas to try.
Does anyone have another suggestion?
Is there something else I can do to try to make the phone live again?
Any help someone can provide will be very much appreciated..
Now this is what I call a coincidence.
About 2 years ago, a friend of mine asked me for help with her E610. Almost all actions were giving us ANRs. Whatever you do, i.e. unsinstall, install, change, delete... after reboot/reset were all there, even notifications! Tried KDZ updater, and, while the update was OK without signs of errors or so, after reboot - nothing, everything was like before. After trying to find a solutions by hundreds of ways, with adb and fastboot commands (all partitions&folders were locked, no read, no write, and you can't see any file, tried root to no avail), L5 got bricked. She already got a new phone and this LG was laying there without any use.
Three days ago I decided to try again, with no hope tbh No screen, no vibration, nothing, apparently dead. But, I could install Qualcomm drivers and my Windows can see it in download mode. I think that the only way is to flash the phone with LGFlashTool and using COM port. I already extracted *.dz from *.kdz but I need the dll for FlashTool. Found 2 or 3 webs with this dll, but you need a 100 bucks subscription :crying: If anyone can upload that dll I'd be very happy to try to flash this phone I'm really big n00b in this, just a plain phone user, nothing more, so don't blame me if I said something wrong
Many thanks in advance.
same problem
Hello! Same problem...
My L5 is making me crazy... It has CyanogenMod 10 nighlty. A friend of mine was using it and he tried to install the GAPPS after he did a factory reset. I have no idea what guide he used but it got soft bricked... It's constantly showing a "stopped working" message and after a while reboots by itself.
I tried to do a factory reset but it always returns to the same point, same apps installed, everything like the reset never happened. I even used CWM to reset it and it allways goes back to the same recovery point.
After a while I decided to flash a stock room but here's the problem: I can't get into emergency mode.
After reading ALL post about it I found that there's at least three ways of entering EM, (1) down VOL and plug in usb cable without battery; (2) down+up VOL and plug in usb; (3) down+up VOL + power botton.
Conclusions:
(1) - gives me a screen full of code like a command line
(2) - White screen
(3) - White screen
I've read ALL the unbrinking post on the internet, including xda, and none of them helped.
The KDZ Updater never recognizes the phone. I installed all the drivers but everytime I plug in the phone it installes the same LGE MTP drive...
Can anyone help, please?!
How to enter Emergency mode? How to flash another rom?
Hey guys. I tried rooting my LG G4c but after rebootingen it seems that my phone is stuck in a loop, and i can't fix it.
What happens when i turn the phone on:
1. LG logo turn up
2. The following message appears:
[670] --------------------------------------
[670]
[670] Boot verification fail!!
[670] - cause : MISMATCH_SIG_LEN
[670]
[670] --------------------------------------
3. Phone reboots
Using the power button + volume down does NOT work anymore to start recovery mode (although starting the IMEI display still works).
I tried using LG UP to install the original firmware via USB but the device does not show up in the list (probably because the phone keeps rebooting itself). Some website also said to connect the phone with the pc, turn LG UP on, then put out the battery and put it back in to make it work, but that also didn't work.
Anyone know what i can try next? What method can i use to reinstall the firmware? And if it's not possible, does it cost much to repair and who should i ask?
Edit: It seems i can start "Factory data reset" but when this proces starts the phone restarts and continues the loop with the error message.
I also tried connecting the device with LG UP while the phone is stalled on the IMEI screen and the Factory data reset screen. This way the phone does note restart itself and it might appear in the device list of LG UP. But too bad it still didn't work.
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
vanderplate said:
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
Click to expand...
Click to collapse
I had this problem too. I send it to LG and said the phone was unplugged during update process. They flashed it and I gave it to my mom. I have an S4 yet. Much better performance and rom support.
download mode
vanderplate said:
I don't know if i'm reaching anyone who can help me, but even a answer from anyone saying that the problem is hard to deal with would already be very relieving I really can't find anything related to this problem on the internet and i'm noobish myself. I'm probably gonna visit a some phone shop down town in the next days because i really don't know what to do.
Click to expand...
Click to collapse
Can you get it into download mode?