Database Users

Easy 2 click root: How I got to 4.2.2 Camera Update/Rooted and WP permanently Off

Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.

It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk

Piaband said:
It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
if i could unlock it when i had gotten it in august, sure. but it's too much effort to start over at this point. i have everything set up perfectly. never had to start over. also didn't want to pay for it and send my info to some stranger on the internet. anyway, moot point. good for you, but that option's not available for most people.

So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app

No nothing roots 4.4 at this point.

vegasdgk said:
So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No he basically just rewrote the instructions of how to root the original firmware.

akellar said:
No he basically just rewrote the instructions of how to root the original firmware.
Click to expand...
Click to collapse
I didn't rewrite it. No where are there instructions for getting root AND write protection off on the 4.2.2 camera update without 1 using command line commands AND 2 that network based program (called Cydia compactor I think). There's none of those complications here. Most people don't even realize 1 click root survives the camera update.
But you are right as to kit kat. I thought my title was clear that this is for jellybean though.

mistermojorizin said:
Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.
Click to expand...
Click to collapse
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???

-Zeta- said:
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???
Click to expand...
Click to collapse
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck

mistermojorizin said:
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck
Click to expand...
Click to collapse
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.

-Zeta- said:
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.
Click to expand...
Click to collapse
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it

mistermojorizin said:
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it
Click to expand...
Click to collapse
Not sure about the battery life on kitkat of the MAXX right now, so i will stick with 4.2.2 first and do a little research.
Anyway, thanks for the reply and I've gained root on 4.2.2 (12.15.15) using RockMyMoto:laugh:

[Q] Note 3 Manual Re-Root - no SU binary installed

I rooted my device with Kingo Android root. I am currently running android OS 4.3.
Everything was going just fine until just today when opened SuperSU and it told me that there is no SU binary installed. SuperSU cannot install it.
Pretty much I need to manually re-root my device.
I am not aware of any recovery files that I may have. To clarify, I have never backed up my device in any way. I have only had it for a month, and there is hardly anything on it. I figured, why bother? Well now I know.
I have done quite a few google searches about this, and I can not find any help.
What is my best course of action?
Thank you very much.

Try reflash and re-root with cf-auto root through Odin. A a small question: u still have root right to install some app such root explorer and titanium backup?
Sent from my SM-N9005 using XDA Premium 4 mobile app

hhai2pth said:
Try reflash and re-root with cf-auto root through Odin. A a small question: u still have root right to install some app such root explorer and titanium backup?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunatly, I no longer have root. None of my root apps can get root permissions because the SU binary is missing.
I tried flashing my firmware, but now my phone is stuck in an unusable state. The official firmware leaves me unable to boot with a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I flash a different ROM on top of that one, all my spen stuff is messed up.
This is way different from jailbreaking. There are so many rom files I have a hard time finding the one I need.
SM-900A in case anyone wants my number.

DrShenanigan said:
Unfortunatly, I no longer have root. None of my root apps can get root permissions because the SU binary is missing.
I tried flashing my firmware, but now my phone is stuck in an unusable state. The official firmware leaves me unable to boot with a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I flash a different ROM on top of that one, all my spen stuff is messed up.
This is way different from jailbreaking. There are so many rom files I have a hard time finding the one I need.
SM-900A in case anyone wants my number.
Click to expand...
Click to collapse
You need to go on sammobile and download your stock firmware (you probably want to stay on 4.3 unless your particular phone and carrier have root capabilities on 4.4.2 which verizon and att do not yet have) then flash it through odin... just search your model # through sammobile and it will show all the available stock firmwares. That will at least get you running again then u will have to root it again from there
Posted from my beast of a VZW Note 3!!

I downloaded the firmware from that site and have tried to flash it.
I get an Error Meassage:
SW REV CHECK FAIL : [sb1]Fused 2 > Binary 1

DrShenanigan said:
I rooted my device with Kingo Android root. I am currently running android OS 4.3.
Everything was going just fine until just today when opened SuperSU and it told me that there is no SU binary installed. SuperSU cannot install it.
Pretty much I need to manually re-root my device.
I am not aware of any recovery files that I may have. To clarify, I have never backed up my device in any way. I have only had it for a month, and there is hardly anything on it. I figured, why bother? Well now I know.
I have done quite a few google searches about this, and I can not find any help.
What is my best course of action?
Thank you very much.
Click to expand...
Click to collapse
1st : I dunno ur device which version of note 3.
2nd : kingo sometimes for some device not working well. Try avoid to use this method. Try cf-autoroot instead. Easy nd simple, but knox will trip.
3rd : have u tried update to latest supersu?
3rd :
Sent from somewhere under the sky, at the vorner of this rounded earth.

antique_sonic said:
1st : I dunno ur device which version of note 3.
2nd : kingo sometimes for some device not working well. Try avoid to use this method. Try cf-autoroot instead. Easy nd simple, but knox will trip.
3rd : have u tried update to latest supersu?
3rd :
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
Updating SuperSU is what cause this mess, I believe. It's too late for that now anyhow, because my phone does not boot.
I have the SM-900A. There is no cf-autoroot for it. Not that I canfind at least.

DrShenanigan said:
Updating SuperSU is what cause this mess, I believe. It's too late for that now anyhow, because my phone does not boot.
I have the SM-900A. There is no cf-autoroot for it. Not that I canfind at least.
Click to expand...
Click to collapse
Try this, mate
http://forum.xda-developers.com/showthread.php?t=2466423

buying a new razr m to root?

I'm entirely new to anything phone/development related so I apologize for my ignorance (I also apologize if this is in the wrong section). I've had a razr M for about 2 years now and I'm entirely content with it except after the last update I can no longer use my foxfi for wifi access. From what I understand I can't root my phone and downgrade from this operating system so my question is this: Can I buy a new one off ebay for ~$100, root it and use foxfi (or some other free wifi tether) while keeping my unlimited data and not "bricking" it? The battery on my current phone has gone to crap anyways and I was considering buying a replacement phone considering they're only ~$100 anyways.
It's a pain in the but trying to figure all of this out with only limited time to browse the internet at work and trying to sort the 100's of pages of info from my phone.
Is this feasible? Are there certain things I need to verify about a phone before I buy it to make sure I can complete this process?
Thanks in advance,
Rory

If you're on the latest firmware, you CAN root with Towel Root and unlock with Motopocalypse. Then you can downgrade back to JB. There's a method posted by @bweN diorD somewhere in this forum.
Sent from my HTC6525LVW using Tapatalk

RikRong said:
If you're on the latest firmware, you CAN root with Towel Root and unlock with Motopocalypse. Then you can downgrade back to JB. There's a method posted by @bweN diorD somewhere in this forum.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Thanks RikRong! How do I know if I'm on the latest firmware (does that just mean the latest operating system? My phone says 4.4.2 so I'm assuming that's a yes)? Sorry, there's a thousand new terms and I'm struggling to take in what this all means.
When it comes to trying to root my phone, since I have no more foxfi I also don't have a way to have internet access on my computer/tablet to walk me through the rooting process/assist me if something goes wrong with the... would you think it's intuitive enough/fullproof that if I print out the thread I can just follow it through and shouldn't have issues? Also, I looked through the first 4 or 5 pages in this forum and didn't find any threads started by "bweN dior" but I'm probably just overlooking what I'm looking for. Do you know what the thread was titled?
Thanks,
Rory

http://forum.xda-developers.com/showthread.php?t=2783157
Install .apk and run
Profit
Don't forget to thank geohot

rypkr937 said:
Thanks RikRong! How do I know if I'm on the latest firmware (does that just mean the latest operating system? My phone says 4.4.2 so I'm assuming that's a yes)? Sorry, there's a thousand new terms and I'm struggling to take in what this all means.
When it comes to trying to root my phone, since I have no more foxfi I also don't have a way to have internet access on my computer/tablet to walk me through the rooting process/assist me if something goes wrong with the... would you think it's intuitive enough/fullproof that if I print out the thread I can just follow it through and shouldn't have issues? Also, I looked through the first 4 or 5 pages in this forum and didn't find any threads started by "bweN dior" but I'm probably just overlooking what I'm looking for. Do you know what the thread was titled?
Thanks,
Rory
Click to expand...
Click to collapse
actually, i didnt make a guide for this model. i made it for the hd/maxx hd. the root and bootloader unlock is the same and you can use those files, but you can NOT use any of the phone specific software in the guide or you will likely brick your phone.
http://forum.xda-developers.com/showthread.php?t=2789743

bweN diorD said:
actually, i didnt make a guide for this model. i made it for the hd/maxx hd. the root and bootloader unlock is the same and you can use those files, but you can NOT use any of the phone specific software in the guide or you will likely brick your phone.
http://forum.xda-developers.com/showthread.php?t=2789743
Click to expand...
Click to collapse
Yeah, I saw that it was someone else that made the guide for the M, but I like how yours is set-up. I was going to point him to your thread in the HD forum for rooting and unlocking, then refer him to guide in the M forum for downgrading. Use Bwen's guide to use Towel Root and Motopocalypse. Get TWRP from here: http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img and flash a SU zip to gain permanent root. Then use this guide to downgrade: http://forum.xda-developers.com/showthread.php?t=2786016 .

RikRong said:
Yeah, I saw that it was someone else that made the guide for the M, but I like how yours is set-up. I was going to point him to your thread in the HD forum for rooting and unlocking, then refer him to guide in the M forum for downgrading. Use Bwen's guide to use Towel Root and Motopocalypse. Get TWRP from here: http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img and flash a SU zip to gain permanent root. Then use this guide to downgrade: http://forum.xda-developers.com/showthread.php?t=2786016 .
Click to expand...
Click to collapse
Okay, I'm trying to start this process. From my droid, I downloaded http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img but immediately I'm encountering problems. My phone says it cannot open this file. I'm already dreading this is going to be difficult/dangerous...
Why can't I open this file? Also, what is flashing a SU zip?

There is far too much about this I don't understand.
I am willing to pay someone to root a razr m for me. Do I have any takers?

Towel Root and Motopocalypse are both apps that you can download to the phone and then run. They're just apps, so they are as easy as opening the app then running. You need to use Towel Root, then Motopocalypse to unlock, and then you can install TWRP. If you don't want to use fastboot to install recovery, then you can flash it with Rashr or Flashify. Just download TWRP and place on your external SD, no need to open or extract it. Flash it with one of those apps. Once you're rooted and unlocked, you should be able to use that guide to downgrade.
Sent from my HTC6525LVW using Tapatalk

rypkr937 said:
Okay, I'm trying to start this process. From my droid, I downloaded http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img but immediately I'm encountering problems. My phone says it cannot open this file. I'm already dreading this is going to be difficult/dangerous...
Why can't I open this file? Also, what is flashing a SU zip?
Click to expand...
Click to collapse
just use the tutorial i posted before as a guide, substituting the files @RikRong gave you for the recoveries.
i just updated the guide to include a complete step by step for flashing the recoveries and su zip.
the only thing you will need is fastboot and adb in the same folder with your recovery file.
the guide instructs to use adb and fastboot from my script, but you wont have my script. thats why you need to grab adb and fastboot from google.
its not difficult, you just dont understand what needs to be done. you dont open the recovery with the phone booted up. just read the guide and subsequent link to the step by step and you will quickly see where you are going wrong.
http://forum.xda-developers.com/showthread.php?t=2789743
just a quick disclaimer for those not following along, ^^^^^ the firmware and recoveries in this guide are for the 926 only!!! use it for reference only!! any other files in the guide and the guide itself, is universal.

rypkr937 said:
There is far too much about this I don't understand.
I am willing to pay someone to root a razr m for me. Do I have any takers?
Click to expand...
Click to collapse
Please refer to this thread > http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432

Now I think I got problems. I thought I had it all figured out with all of the walkthroughs. I have the phone in fastboot mode and I was flashing it with RSD for the previous firmware. It was going through the steps and on 7/20 it said failed flash. I tried again and now it says failed flash after 1/20. I'm afraid to try and boot the phone. What should I do?

rypkr937 said:
Now I think I got problems. I thought I had it all figured out with all of the walkthroughs. I have the phone in fastboot mode and I was flashing it with RSD for the previous firmware. It was going through the steps and on 7/20 it said failed flash. I tried again and now it says failed flash after 1/20. I'm afraid to try and boot the phone. What should I do?
Click to expand...
Click to collapse
If your boot loader isn't unlocked, you can't flash older FW. Did you unlock already?
Sent from my HTC6525LVW using Tapatalk

rypkr937 said:
Now I think I got problems. I thought I had it all figured out with all of the walkthroughs. I have the phone in fastboot mode and I was flashing it with RSD for the previous firmware. It was going through the steps and on 7/20 it said failed flash. I tried again and now it says failed flash after 1/20. I'm afraid to try and boot the phone. What should I do?
Click to expand...
Click to collapse
It says USB error. I unplugged it from the computer and tried it again. It's step 7/20 "flash modem "non-hlos.bin" where it is getting screwed up.

RikRong said:
If your boot loader isn't unlocked, you can't flash older FW. Did you unlock already?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Yes. I think? I did these steps successfully
-----------------------------------------
2. BOOTLOADER UNLOCKING
-----------------------------------------•Download Towel Root [XDA] [WEBSITE] - Disregard if you have previously rooted using Towel Root
•Download Motopocalypse [WEBSITE] [DOWNLOAD]
•Place both on external SDcard
•Install and run Towel Root
•Follow any in-app prompts
•Reboot
•Install and run Motopocalypse
•Follow any in-app prompts
•Reboot
•PROFIT!
My error specifically says this:
Failed flashing process. 7/20 flash modem "non-hlos.bin" -> USB error occurred while reading/writing.

I unplugged it and tried another USB port and it went through all the steps 20/20. Then it rebooted my phone and the phone says "please wait, this may take a few minutes". After several minutes RSD told me to "manually power on the phone". Since the phone was never shut off I couldn't do this so I unplugged the USB and replugged it in thinking maybe there was another USB error. RSD has now finished and says result is "PASS". However my phone still says "please wait, this may take a few minutes". Should I let me phone be or should I restart it?

rypkr937 said:
I unplugged it and tried another USB port and it went through all the steps 20/20. Then it rebooted my phone and the phone says "please wait, this may take a few minutes". After several minutes RSD told me to "manually power on the phone". Since the phone was never shut off I couldn't do this so I unplugged the USB and replugged it in thinking maybe there was another USB error. RSD has now finished and says result is "PASS". However my phone still says "please wait, this may take a few minutes". Should I let me phone be or should I restart it?
Click to expand...
Click to collapse
do the 3 button trick to get into flash mode and tell us what the status code is please.

bweN diorD said:
do the 3 button trick to get into flash mode and tell us what the status code is please.
Click to expand...
Click to collapse
power + volume up + down rebooted me to a screen that asked me to select my language (just as before). After selecting English it goes back to the "please wait this make take a few minutes" screen.

It's working!!!! I just ran RSD again (and this from the start on a usb 2.0 port as I read 3.0 can screw it up). This time it worked like a charm! I'm back on jellybean and posting from my laptop through a foxfi connection from my phone! SO thankful for this and those who did the write ups/walk throughs and posted in here! I got a lot of apps and setting to update ahead of me ugh. I'm going to do some donating here for the help! Thanks to those who posted in this thread and the ones who made those write ups and the app developers!

How do I keep my phone from automatically updating back to KK?? I didn't let it update when KK originally came out (I just kept clicking postpone) until about a month or two later it just updated on it's own. Well my phone just started automatically downloading a system update again. I put it in airplane mode but how do I keep this update from happening again and getting screwed by KK again?

Download Unsuccessful MSG - KK to N910VVRU1BOAF

I'm trying to root, then unlock my Retail phone. I heard it can be done on BOAF 5.0.1. I downgraded my phone to KK ANJ5 (details on what steps I took, here)
I actually did a Factory Data Wipe twice before beginning, although the instructions said I only needed to do it once (doing it twice shouldn't hurt).
When I tap the System Updates button, it appears to start downloading, then after a few minutes, I'll get an error message saying "Download Unsuccessful". I've done this several times. Why is this happening now? I've cleared everything. Could Verizon have pulled the update? Can I install the two files manually? If so, please point me to the right direction. Thanks.

Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.

Sizzlechest said:
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Click to expand...
Click to collapse
I took the latest safe upgrade, I think it's BP1 or something like that., to 5.1.1. THAT worked.

So basically we have to be on 5.1.1 ??
Sent from my SM-N910V using XDA Premium HD app

rrjskj said:
So basically we have to be on 5.1.1 ??
Sent from my SM-N910V using XDA Premium HD app
Click to expand...
Click to collapse
I'm just saying that's what for sure worked for me. KK didn't work at all. I don't know if you "have to" be on it or not.

JOSHSKORN said:
I'm just saying that's what for sure worked for me. KK didn't work at all. I don't know if you "have to" be on it or not.
Click to expand...
Click to collapse
I might give it a whirl if fix doesn't come soon. In the meantime could u point me in the right direction for the safe upgrade files and what Odin version ?? Thanks in advance.
Sent from my SM-N910V using XDA Premium HD app

http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!

Rom-Addict said:
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Click to expand...
Click to collapse
Already did it I appreciated.
Sent from my SM-N910V using XDA Premium HD app

I've had it work on boaf, bpa, bog5. kk wouldn't work for me. using king root 4.0,.all unlocks (n4.n4.bin. n4.fix) worked for me. bpa (5.1.1)required the emotion kernel to boot. also returned my original Cid to use kies to restore all apps & data, then odined back again, unlocked, rooted ect. be patient

Rom-Addict said:
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Click to expand...
Click to collapse
What confused me and a few other people in that thread is that you NEED to flash that kernel before the SuperSU linked there if you want to root 5.1.1 firmware. I thought it was just if you had taken the OTA 5.1.1.

Sizzlechest said:
What confused me and a few other people in that thread is that you NEED to flash that kernel before the SuperSU linked there if you want to root 5.1.1 firmware. I thought it was just if you had taken the OTA 5.1.1.
Click to expand...
Click to collapse
This is what I did (I think). Kinda hard to remember everything. For more information, read through the HOWTO thread. I think I started posting at about page 9.
went ahead and did the safe upgrade via Odin
Swapped out my MicroSD card for a different one I had laying around
Unlocked my phone
Powered Down (If I could, or remove the battery)
Removed the MicroSD card (otherwise it would boot loop)
Connected to My Computer
Boot to Download Mode (DOWN ARROW+HOME+POWER BUTTON)
Flashed TWRP using Odin
Reinserted the original MicroSD Card (Different SD card than what was used during the unlock process, the same one I was using prior to unlocking)
Booted into TWRP (UP ARROW+HOME+POWER BUTTON)
It prompted me to install SuperUser, so I did, it caused a bootloop, so I pulled my battery.
Removed MicroSD Card, plugged it into my computer and put SuperSU.zip and a kernel (See this post) zip file on it, re-inserted the MicroSD into my phone
Booted to TWRP (UP ARROW+HOME+POWER BUTTON)
Flashed the two files I'd just put on my MicroSD (Not sure if a reboot is required or if they could be done at the same time, I rebooted each time)
I did not clear cache/dalvik. Not sure if that was necessary.
This is all what got me to where I'm at, now.

JOSHSKORN said:
This is what I did (I think). Kinda hard to remember everything. For more information, read through the HOWTO thread. I think I started posting at about page 9.
...
This is all what got me to where I'm at, now.
Click to expand...
Click to collapse
For 5.0.1, you don't need to flash a new kernel, so that's why it works. If you want to upgrade to N910VVRU2BPA1:
Download N910VVRU2BPA1_StockRestore.tar.md5.7z and uncompress with 7-zip.
Flash with Odin.
Reboot phone back into Download Mode and flash TWRP with Odin.
Copy MultiSystem-Kernel_LP-5.1.1.zip and BETA-SuperSU-v2.67-20160203160253-TruncatedBoot-Fix.zip to the phone's internal memory. (Include xposed-v75-sdk21-arm-arter97-snapdragon.zip if you want XPosed.)
Reboot to recovery and flash all three in the above order.
Wipe cache and Davlik cache. Reboot to system.

Sizzlechest said:
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Click to expand...
Click to collapse
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you

Jimmy8 said:
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Click to expand...
Click to collapse
There seems to be a bug in the detection routine on the program that changes the bootloader to developer when run on 4.4.4. If you want to follow the original directions, upgrade (first) to a 5.0.1 firmware since that is known to work with the unlocker and no new kernel needs to be flashed. If you get it to work for 5.0.1, then you can always upgrade to 5.1.1 or flash another rom.
If you want to try to go straight to 5.1.1 by flashing through Odin, you can try it. I'm almost positive you could downgrade to 5.0.1 if that doesn't work. (If you take the software upgrade through Verizon, you will have problems downgrading AFAIK.)

Sizzlechest said:
There seems to be a bug in the detection routine on the program that changes the bootloader to developer when run on 4.4.4. If you want to follow the original directions, upgrade (first) to a 5.0.1 firmware since that is known to work with the unlocker and no new kernel needs to be flashed. If you get it to work for 5.0.1, then you can always upgrade to 5.1.1 or flash another rom.
If you want to try to go straight to 5.1.1 by flashing through Odin, you can try it. I'm almost positive you could downgrade to 5.0.1 if that doesn't work. (If you take the software upgrade through Verizon, you will have problems downgrading AFAIK.)
Click to expand...
Click to collapse
Thanks I just upgraded through Verizon to 5.0.1 and I'll give that a try and see if it works if not I'll safe upgrade to 5.1.1 thanks

Jimmy8 said:
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Click to expand...
Click to collapse
If that doesn't work, I recommend you rollback to 4.4.4 (you should be able to if you're on BOAF), then take the safe upgrade to BP1. Once you do that, you should be good to go. That is, I wasn't able to convert to developer mode on KK, but after taking the safe upgrade, I was. Maybe it had to do with the BOAF bootloader, and if that's the case, "maybe' you're ok doing it as is. Good luck. I'm sure you'll be back if it doesn't work, but if it DOES work, can you report back? In fact, I also have a thread in Q&A titled Root Survey. Please post there as well ONLY if you were able to successfully convert. I wanted to compile a list of users that were able to convert, where they were before they started, what worked, what didn't, and so far, all what I'm seeing is, is that starting from KK doesn't work, although we were told all along to keep KK. I also heard one user said that he had taken all OTAs to 5..1.1., still made the conversion process work, BUT, his phone was a developer phone to begin with but he accidentally locked it with a Retail ROM. I'm kind of a noob, myself, but from what I do know, I don't recommend taking any OTAs anyway past BOAF, otherwise the conversion "might not" happen, but there are a lot of people who have taken all OTAs so we'll see what happens with them.

JOSHSKORN said:
If that doesn't work, I recommend you rollback to 4.4.4 (you should be able to if you're on BOAF), then take the safe upgrade to BP1. Once you do that, you should be good to go. That is, I wasn't able to convert to developer mode on KK, but after taking the safe upgrade, I was. Maybe it had to do with the BOAF bootloader, and if that's the case, "maybe' you're ok doing it as is. Good luck. I'm sure you'll be back if it doesn't work, but if it DOES work, can you report back? In fact, I also have a thread in Q&A titled Root Survey. Please post there as well ONLY if you were able to successfully convert. I wanted to compile a list of users that were able to convert, where they were before they started, what worked, what didn't, and so far, all what I'm seeing is, is that starting from KK doesn't work, although we were told all along to keep KK. I also heard one user said that he had taken all OTAs to 5..1.1., still made the conversion process work, BUT, his phone was a developer phone to begin with but he accidentally locked it with a Retail ROM. I'm kind of a noob, myself, but from what I do know, I don't recommend taking any OTAs anyway past BOAF, otherwise the conversion "might not" happen, but there are a lot of people who have taken all OTAs so we'll see what happens with them.
Click to expand...
Click to collapse
I can't even get king root to root it constantly reboots my phone during rooting process I've tried different versions and it doesn't matter do you have any suggestions or point me in the direction to roll back to 4.4.4 I've been out of the game for a while so I've forgotten a lot of stuff on how to do this thank for all your help so far

Jimmy8 said:
I can't even get king root to root it constantly reboots my phone during rooting process I've tried different versions and it doesn't matter do you have any suggestions or point me in the direction to roll back to 4.4.4 I've been out of the game for a while so I've forgotten a lot of stuff on how to do this thank for all your help so far
Click to expand...
Click to collapse
Believe me, I'm with you right there, as well, been out of the game for so long. Thanks Verizon Retail locking. Anyway....
Where are you right now? Your Android version/Build Number.

joshskorn said:
believe me, i'm with you right there, as well, been out of the game for so long. Thanks verizon retail locking. Anyway....
Where are you right now? Your android version/build number.
Click to expand...
Click to collapse
5.0.1 / n910vvru1boaf

Shortcut to being rooted on N910VVRU2CQI2

Here's my Cheat Sheet ! This is the same procedure I used a while back with N910VVRU2CPD1 . I just updated the thread to work with the newer package.
1. Odin SamMobile N910VVRU2BPA1
reboot and factory reset a few times if needed to remove custom icon
2. Odin hsbadr's N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar HERE
3. Unlock with the samsung_unlock_n4-fix PROCESS use SIM card for data. Wi-Fi will not work at this point.
4. Odin twrp-3.0.2-0-trltevzw.tar Uncheck Auto Reboot, Manually boot into TWRP
5. Odin hsbadr's N910VVRU2CPD1_StockRestore.tar HERE
6. TWRP BETA-SuperSU-v2.71-20160331103524, Factory Reset, boot system
7. Use FlashFire to Flash firmware package SamMobile N910VVRU2CQI2
( ! System and Cache only ! )
Your mileage may vary.
Before I install my personal apps I remove as much Verizon, Samsung and Google spyware as possible.
-------------------------------------------------------------------------------------------------
EDIT: I was able to skip the recommended rooting and unlocking of 5.1.1 and make the jump I described.
I did not do the unlock using Kingroot until step 3 and I did not permanent root with Super Su until step 6.
No matter how you get there the phone has to be on [Firmware] [MM] [6.0.1] [RetEd/DevEd] Safe Upgrade to Marshmallow [N910VVRU2CPD1] then you can use FlashFire.
Hyperlinks are in the text to most of what's needed.
Credit AstonsAndroid I found it HERE

I keep seeing people saying there is a way to just flash TWRP and Magisk and you're done. I'd like to avoid SuperSU and the other root methods if possible. How would that work with your updated guide? Thanks

My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839

RootMyNote4Please said:
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
Click to expand...
Click to collapse
I'm not sure if it was spyware or what. but my phone performance better after cleaning out that folder.

Thanks doc. Is that a folder that gets overwritten when you flash a new room?

This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?

lodilovesmuffins said:
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
Click to expand...
Click to collapse
Kingroot needs to connected to root. I never seen it work without a connection. N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar brakes wifi but you get it back with N910VVRU2CPD1_StockRestore.tar, I dont know why. It just works

RootMyNote4Please said:
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
Click to expand...
Click to collapse
My best guess now is it's some kind of provisioning issue that is cleaned up. Some of the files deleted you may actually need some day.

does this require the developer version? btw how do i backup

I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.

RootMyNote4Please said:
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
Click to expand...
Click to collapse
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.

kevintm78 said:
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
Click to expand...
Click to collapse
That's weird. I flashed SuperSU but it didn't show up in the apps and when I tried to use Flashfire it said I didn't have root.

Got there. SuperSU had an error message when I tried to install it the 1st time after flashing full system. So I rebooted and installed again. Now Flashfire crashes and won't open. Switched to Flashify and it seems to work ok.
Edit - Stuck here for now. Flashify can't seem to find the CQI2 file and I still haven't been able to get Flashfire to work. Tried an older version and still crashes when it checks to see if I have the pro version or not.

In case someone else has the same problem with Flashfire, it's because the program expired April 1st, 2018. Turn the date back on your phone and it will load.

Finally completed it!!!
Ok, so the things I learned from my trials and errors.
1) DON'T flash the kernal and SU after you root with the N4 fix. I did this the 1st 15 times and could never get Flashfire to work later on. So skip all of the stuff in that post after you flash TWRP. Then flash the next firmware step.
2) Uncheck auto time and date on your phone and roll it back to before 4/1/18 to get Flashfire to work.
I'm sure there are some more things and I'll add whatever else I think can help the next guy along. Good luck! And thanks for the guide doc!
Note: Did the phone icon on your lock screen disappear as well when you were done? The camera is there on the bottom right like normal, but the phone is gone on the bottom left and it displays the charging info there now.

Thanks for this - it was helpful to make clear that in my mind that despite what other guides say, there is no need to unlock a Lollipop bootloader with a Lollipop kernel + ROM first, and that we can boot a Lollipop kernel + ROM with a Marshmallow bootchain and unlock the Marshmallow bootloader from the get-go.
I tracked down the CQI2 full Odin and I made hybrid Odins that get you "rooted on N910VVRU2CQI2" in fewer steps, following hsbadr's file naming scheme:
N910VVRU2BPA1_N910VVRU2CQI2_FullFirmware.tar.md5: MM CQI2 bootchain/firmware/modem, LL BPA1 ROM/kernel/recovery
N910VVRU2CQI2_StockRestore.tar: MM CQI2 ROM/kernel (no recovery - TWRP isn't overwritten)
These should be fine as drop-in replacements for the files mentioned in steps 2 and 5 of your guide.
Using these obviously means that you are unlocking the CQI2 aboot instead of the CPD1 aboot in step 3 while temprooted, and - importantly - step 7 is unnecessary to get to a CQI2 ROM, which is good because Flashfire is now expired :3
I doubt there's much of a real benefit to being on the newer aboot, but hey, why not.

Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?

lodilovesmuffins said:
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
Click to expand...
Click to collapse
No, this will work with both versions of the verizon note 4.

kevintm78 said:
No, this will work with both versions of the verizon note 4.
Click to expand...
Click to collapse
Ok, thank you very much. I'll try and root my phone with this tutorial now.

Please help!!!!
I followed this link because its supposed to be a way to downgrade from 6.1.0 to 5.1.1 so I can unlock boot loader. However, these instructions make no sense to me. Can someone PLEASE help me. I've been searching and searching for a way to root my note 4 (N910VVRS2CQA1) and can't seem to find a way. I've never done this before so I'm pretty clueless. When I read these instructions, I just don't understand what I'm supposed to be doing. A lot of this tech lingo means nothing to me unfortunately. I'm starting to thing I should just give up the idea of rooting this Note 4 that's getting slower and slower and just get a new one. I don't really want to though bc I love the fact that you can replace the battery. It'd be much easier to just root and upgrade.....well, easier if I actually knew how.