Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.
It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk
Piaband said:
It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
if i could unlock it when i had gotten it in august, sure. but it's too much effort to start over at this point. i have everything set up perfectly. never had to start over. also didn't want to pay for it and send my info to some stranger on the internet. anyway, moot point. good for you, but that option's not available for most people.
So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app
No nothing roots 4.4 at this point.
vegasdgk said:
So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No he basically just rewrote the instructions of how to root the original firmware.
akellar said:
No he basically just rewrote the instructions of how to root the original firmware.
Click to expand...
Click to collapse
I didn't rewrite it. No where are there instructions for getting root AND write protection off on the 4.2.2 camera update without 1 using command line commands AND 2 that network based program (called Cydia compactor I think). There's none of those complications here. Most people don't even realize 1 click root survives the camera update.
But you are right as to kit kat. I thought my title was clear that this is for jellybean though.
mistermojorizin said:
Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.
Click to expand...
Click to collapse
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???
-Zeta- said:
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???
Click to expand...
Click to collapse
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck
mistermojorizin said:
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck
Click to expand...
Click to collapse
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.
-Zeta- said:
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.
Click to expand...
Click to collapse
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it
mistermojorizin said:
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it
Click to expand...
Click to collapse
Not sure about the battery life on kitkat of the MAXX right now, so i will stick with 4.2.2 first and do a little research.
Anyway, thanks for the reply and I've gained root on 4.2.2 (12.15.15) using RockMyMoto:laugh:
Related
Hi,
I'm expecting my Nexus 4 some time this week and I'd like a little help.
I have a htc one x at the moment. A while after I got it, I decided to unlock it and use custom rom etc.
With the nexus 4, I just want to root it without disrupting anything if possible. The one thing I don't want to mess up is getting the Ota updates as I couldn't get that to work again on my one x.
So to summarise, I want to root my Nexus 4 whilst retaining the ability to get Ota updates and full functionality as normal. Can anyone help?
You'll need adb/fastboot + the appropriate drivers.
-unlock BL via fastboot,
-flash recovery via fastboot,
-flash SU zip via recovery,
-leave BL unlocked, no reason to relock it.
That's it. Don't remove, or rename any system apps if you want the OTA to apply. You can even flash OTA's via a custom recovery, this will likely be available here prior to you getting a notification.
Good info here: http://forum.xda-developers.com/showthread.php?t=2010312
So there is no way to root the device without unlocking the bootloader and flashing the custom recovery?
I'm basically in the same boat. I'm developing android apps and want to use log reading apps but I don't want to have any custom rom/recovery on the phone.
mseebass said:
So there is no way to root the device without unlocking the bootloader and flashing the custom recovery?
I'm basically in the same boat. I'm developing android apps and want to use log reading apps but I don't want to have any custom rom/recovery on the phone.
Click to expand...
Click to collapse
You know when you are on other phones, you are actually unlocking the bootloader via a exploit or through the manufacturers developer center.
You need a custom recovery in order to obtain root. It is a must need, without it you cannot be rooted.
Only way to change your recovery is to unlock the bootloader. Having a locked bootloader locks it so your recovery can't be changed. So.... You get the idea
Sent from my Nexus 4 using xda premium
mseebass said:
So there is no way to root the device without unlocking the bootloader and flashing the custom recovery?
I'm basically in the same boat. I'm developing android apps and want to use log reading apps but I don't want to have any custom rom/recovery on the phone.
Click to expand...
Click to collapse
You can do it via adb with an insecure boot image, outlined here below the CWM method: http://forum.xda-developers.com/showthread.php?t=1993331&highlight=insecure
If you do it the CWM, or TWRP way you can flash the stock recovery again. You absolutely have to unlock the bootloader however, no way around that.
CF Root is another option: http://forum.xda-developers.com/showthread.php?t=2025274
i just want to make sure you know that if by some circumstance you lose ota that you can always just download the zip of the update here and flash in recovery. there really is no reason for ota that i can see on a nexus device. its here as soon as its released pretty much.
phermey said:
i just want to make sure you know that if by some circumstance you lose ota that you can always just download the zip of the update here and flash in recovery. there really is no reason for ota that i can see on a nexus device. its here as soon as its released pretty much.
Click to expand...
Click to collapse
Convenience? With CWM it even patches on first boot so you don't lose root or anything so I like being able to do OTA (well the one update so far) vs. having to connect to my desktop.
threeclaws said:
Convenience? With CWM it even patches on first boot so you don't lose root or anything so I like being able to do OTA (well the one update so far) vs. having to connect to my desktop.
Click to expand...
Click to collapse
no reason to connect to desktop if you have recovery. you can come here on your phone or 'chrome to phone' it over. find the thread. click the download link. then reboot in recovery and flash.
phermey said:
no reason to connect to desktop if you have recovery. you can come here on your phone or 'chrome to phone' it over. find the thread. click the download link. then reboot in recovery and flash.
Click to expand...
Click to collapse
I also could drop it into dropbox but that is all more work than just hitting "install" on my phone, it isn't like updates are released with enough frequency that the amount of work matters but like I said OTA is more convenient for me and CWM made it even more convenient. The OP may have completely different reasons for wanting OTA.
phermey said:
i just want to make sure you know that if by some circumstance you lose ota that you can always just download the zip of the update here and flash in recovery. there really is no reason for ota that i can see on a nexus device. its here as soon as its released pretty much.
Click to expand...
Click to collapse
i think you must have missed that part in bold. no reason to be a smart a$$ either when you are the one who didnt know there is no reason to connect to desktop.
remember... the whole reason for this thread in the first place is because the op lost ota on his last phone by rooting it. all i did was try to let him feel at ease.
ORStoner said:
Hi,
I'm expecting my Nexus 4 some time this week and I'd like a little help.
I have a htc one x at the moment. A while after I got it, I decided to unlock it and use custom rom etc.
With the nexus 4, I just want to root it without disrupting anything if possible. The one thing I don't want to mess up is getting the Ota updates as I couldn't get that to work again on my one x.
So to summarise, I want to root my Nexus 4 whilst retaining the ability to get Ota updates and full functionality as normal. Can anyone help?
Click to expand...
Click to collapse
Just use the nexus 4 toolkit, follow it's directions/steps - Can't get any easier or less impact than that. Install Drivers, unlock bootloader and root. Done. OTA still work, install busybox from the play store if needed.
http://forum.xda-developers.com/showthread.php?t=1995688
phermey said:
i think you must have missed that part in bold. no reason to be a smart a$$ either when you are the one who didnt know there is no reason to connect to desktop.
remember... the whole reason for this thread in the first place is because the op lost ota on his last phone by rooting it. all i did was try to let him feel at ease.
Click to expand...
Click to collapse
I wasn't being a smart ass nor was I unaware of other ways to get an OTA update, you said there was no reason for OTA on a nexus device and I responded why someone would want it.
clockcycle said:
Just use the nexus 4 toolkit, follow it's directions/steps - Can't get any easier or less impact than that. Install Drivers, unlock bootloader and root. Done. OTA still work, install busybox from the play store if needed.
http://forum.xda-developers.com/showthread.php?t=1995688
Click to expand...
Click to collapse
Don't use toolkits take the time and learn how to do it yourself so if you get into situations where you messed something up you know how to fix it as you know how adb and fast boot will work.
Toolkits are not worth the short cut
Sent from my Nexus 4 using xda premium
Can I just unlock the bootloader, fastboot boot not flash cwn and install root from there.
Also, how does unlocking bootloader affect warranty?
Sent from my HTC One X using xda premium
ORStoner said:
Can I just unlock the bootloader, fastboot boot not flash cwn and install root from there.
Also, how does unlocking bootloader affect warranty?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
This is the best way to do it. Yes you can fastboot boot cwm so it'll be temp and just install supersu zip. Regarding warranty for bootloader, it originally came locked so should you need to return it, warranty will be voided if you unlock it. However, it would really be just fastboot oem lock if you need to relock it. The state won't show relocked if you do it. It'll be plain locked
Sent from my Nexus 7 using Tapatalk 2
I have a Motorola droid razr m model XT907. It's rooted and GSM unlocked. I'm using it on Straight Talk currently. Verizon is pushing this 98.18.78 update which I hear unroots the phone. I want to know which of the verizon apps I need to freeze or remove to prevent this update.
Thanks in advance
Blufx1 said:
I have a Motorola droid razr m model XT907. It's rooted and GSM unlocked. I'm using it on Straight Talk currently. Verizon is pushing this 98.18.78 update which I hear unroots the phone. I want to know which of the verizon apps I need to freeze or remove to prevent this update.
Thanks in advance
Click to expand...
Click to collapse
Just a heads up, you posted in the Razr HD forum, but no big deal the procedure will be the same for both. When I was running stock ROMs, I would freeze the updater.apk in TiBU to prevent OTAs. However, the new update is rootable with Motochopper 1.3, but you can't unlock the bootloader. If I was in your situation, I would unlock the bootloader now, take the update (for the improvements it offers), re-root it, and unlock it for GSM again. Once your BL is unlocked and you have a custom recovery installed, all you have to do is flash SU in recovery to regain root.
I thank you for the answer. You make it sound so easy,. However, I needed step by step instructions to get where I am now. Can you point me to some to do this? I've unlocked the GSM a couple of times using CellZealot's post. That's no problem. I have titanium backup to freeze the updater.apk, but what is TiBU? I'll get Motochopper in the meantime.
Duhhhh, I just figured out what TiBU is.
Blufx1 said:
Duhhhh, I just figured out what TiBU is.
Click to expand...
Click to collapse
If you don't want to unlock the bootloader and want to take the OTA, then root afterwards, you can find Motochopper 1.3 here:
http://www.droidrzr.com/index.php/t...oot-razr-m-xt907-for-locked-devices-on-91878/
If you want to unlock the bootloader, look for Motopocalypse here (you'll need root access for this, so unlock prior to updating. The OTA does block the ability to unlock the BL, but does not block the ability to root):
http://wiki.cyanogenmod.org/w/Template:Motopocalypse
Once you unlock the bootloader, look for the TWRP thread in the Development section, there should be instructions, along with the file you need to install the recovery. Once TWRP is installed, get the updater SuperSU .zip and flash it in recovery and you will re-gain root. If you want to update after unlocking, you can take one of the several stock ROMs running around here and flash in recovery.
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053
Long story short:
- You can stay as is, by just freezing the updater.apk
- You can OTA and re-root with Motochopper 1.3
- You can unlock bootloader and re-root afterwards.
Thanks again. I'll work on this tomorrow and post back.
Blufx1 said:
Thanks again. I'll work on this tomorrow and post back.
Click to expand...
Click to collapse
No probem, let us know how it turns out.
RikRong said:
If you don't want to unlock the bootloader and want to take the OTA, then root afterwards, you can find Motochopper 1.3 here:
http://www.droidrzr.com/index.php/t...oot-razr-m-xt907-for-locked-devices-on-91878/
If you want to unlock the bootloader, look for Motopocalypse here (you'll need root access for this, so unlock prior to updating. The OTA does block the ability to unlock the BL, but does not block the ability to root):
http://wiki.cyanogenmod.org/w/Template:Motopocalypse
Once you unlock the bootloader, look for the TWRP thread in the Development section, there should be instructions, along with the file you need to install the recovery. Once TWRP is installed, get the updater SuperSU .zip and flash it in recovery and you will re-gain root. If you want to update after unlocking, you can take one of the several stock ROMs running around here and flash in recovery.
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053
Long story short:
- You can stay as is, by just freezing the updater.apk
- You can OTA and re-root with Motochopper 1.3
- You can unlock bootloader and re-root afterwards.
Click to expand...
Click to collapse
To add to this, if you unlock, you will permanently be able to root...
Sent from my Nexus 7 using Tapatalk 4
Ok. I have the bootloader unlocked. I downloaded a rom from here. It's been cleaned up of bloatware and stuff. I have SuperSU and updater SuperSU, but I dont know what to do with it. I also installed TWRP manager. I need just a little more guidance.
Blufx1 said:
Ok. I have the bootloader unlocked. I downloaded a rom from here. It's been cleaned up of bloatware and stuff. I have SuperSU and updater SuperSU, but I dont know what to do with it. I also installed TWRP manager. I need just a little more guidance.
Click to expand...
Click to collapse
Ok, so first, you need to disable the install-recovery script. I built an app to do this (YOU GET TO BE THE FIRST TESTER YAY!)
Install this app: ftp://kd8rho.net/RecoveryFlasherDisabler-public-test.apk
Choose "disable install-recovery"
That will (theoretically - can't test cause my phone's rooted and ROMMed) allow you to install a custom recovery without any hassle.
Once that's done, follow the installation instructions in this thread http://forum.xda-developers.com/showthread.php?t=2226729, starting with this line:
Next, choose your recovery. There are 2 options, TWRP (Touch Win Recovery Project) and CWM (ClockworkMod)
Click to expand...
Click to collapse
You won't have to boot directly into recovery because that app *should* fix that for you. You can boot the phone normally after installing and run something like "adb reboot recovery"
I downloaded and installed your app. When I ran it, it said the installer was found, but disabled. moving on to step two now. Thanks
Hello. This is way off base but does the update fix the screen glitch? Are there any roms that will fix the glitch?
Thanks in advance!
Xt907 JESUS IS THE WAY, THE TRUTH, AND THE LIGHT! *BE BLESSED*
The screen glitch isn't fixed from the update. It might be better. I have a hunch the new radio isn't good for customers with unlimited data in areas with 4G coverage. My phone seems more eager to switch to 3g after the update. Besides that, I can't tell this update foes anything positive. It would be nice to use fastcharge while powered off but for some reason my device will not turn off while it's plugged in. It used to turn off and charge, then one day it quit working. If my battery is low enough and I turn the phone off the green light glows solid for s few minutes then the xt907 turns itself on. Can I downgrade to the previous radio or am I stuck with the new 3g friendly radio that presumably serves Verizon's purposes and not mine?
Sent from my XT907 using xda app-developers app
zombolt said:
The screen glitch isn't fixed from the update. It might be better. I have a hunch the new radio isn't good for customers with unlimited data in areas with 4G coverage. My phone seems more eager to switch to 3g after the update. Besides that, I can't tell this update foes anything positive. It would be nice to use fastcharge while powered off but for some reason my device will not turn off while it's plugged in. It used to turn off and charge, then one day it quit working. If my battery is low enough and I turn the phone off the green light glows solid for s few minutes then the xt907 turns itself on. Can I downgrade to the previous radio or am I stuck with the new 3g friendly radio that presumably serves Verizon's purposes and not mine?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Yea...all I did was flash the radio and it feels like I'm being throttled now that I have the new radio...still on the.3/.78 just with the new radio... I'll try and flash the old radio here in a min ... Are you on an unlocked bootloader?
Sent from my XT907 using xda app-developers app
zombolt said:
The screen glitch isn't fixed from the update. It might be better. I have a hunch the new radio isn't good for customers with unlimited data in areas with 4G coverage. My phone seems more eager to switch to 3g after the update. Besides that, I can't tell this update foes anything positive. It would be nice to use fastcharge while powered off but for some reason my device will not turn off while it's plugged in. It used to turn off and charge, then one day it quit working. If my battery is low enough and I turn the phone off the green light glows solid for s few minutes then the xt907 turns itself on. Can I downgrade to the previous radio or am I stuck with the new 3g friendly radio that presumably serves Verizon's purposes and not mine?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately I am locked. Bought the phone *right* after the may update. I migrated from the droid incredible, which has an open bootloader I believe. So it's been pretty rough after having that phone!
Sent from my XT907 using xda app-developers app
What "screen glitch" are you talking about?
Oh, I forgot to post back. I managed to screw it up royally. But I have it straightened out now after a flash.
The screen will occasionally glitch on the left side, pushing the screen right and changing the color for about 1-2 seconds
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Ok guys it looks like Jcase did it again he created an exploit that gets write protecton off for good or until an OTA. He states this will survive even an FXZ or factory data reset.
Here is what I did took about 15 min. go here ---->http://forum.xda-developers.com/showthread.php?t=2551113 down load the exploit follow the instructions it's very easy the exploit does it all. I am not sure if I needed to do this or not but I did to be safe I used fastboot and put stock recovery back. Just take the recovery.img from the FXZ and open a command prompt type in this command------> fastboot flash recovery recovery.img
You must be in fastboot obviously it will flash recovery back and you lose WP off. You then run MotoWpNoMo and it bypasses WP protection for ever or until OTA from what I have read. Open a command prompt and type in this command------> adb shell getprop ro.boot.write_protect to check if write protection is disabled it will return a value of "0". No more having to boot into recovery to make system changes that require writer protection off this is true root. Great job Jcase!!!!!!!!!!!!!!!!!!!!
Oh and we have stock recovery back and I beleive that voodoo ota root keeper works on 4.2.2 so I think we will have a very easy time upgrading to 4.4 and not have to re-root this is just a theory at this point.
I just tweeted Jcase looks like he tested this method it was the rumrunner team (beaups and fuses) that created this exploit.
Why couldn't this come at the beginning of a weekend, instead of a week? Aaaarrrrrggghhhh!
fat-fingered and Maxx-ed out.
Einsteindks said:
Why couldn't this come at the beginning of a weekend, instead of a week? Aaaarrrrrggghhhh!
fat-fingered and Maxx-ed out.
Click to expand...
Click to collapse
It actually did but I worked all weekend and was not able to try it until today but it is SUPER EASY TO DO.
The other plus to this is voodoo still protects root on 4.2.2 so since we have stock recovery back we SHOULD not guaranteed but should be able to download the update to our sdcard an install 4.4 through stock recovery and keep root. The only question is if we would need to run the exploit again to get write protection off. I don't know if it would survive the OTA but I am leaning on it not surviving. Not that it matters this works on 4,4 anyway.
Another quick way to see if WP is off is to uninstall then re-install SS recovery we could not do that before unless we booted in to recovery with WP off. I just tried it and it works great.
Worked perfect on my Mini. Just be patient and keep an eye on it for granting superuser permission and unlocks after reboots.
should i just wait for kitkat to come out? because i dont feel like refreshing everything and starting over lol.. since i went back to stock and not able to save data XD
bigv5150 said:
Ok guys it looks like Jcase did it again he created an exploit that gets write protecton off for good or until an OTA. He states this will survive even an FXZ or factory data reset.
Here is what I did took about 15 min. go here ---->http://forum.xda-developers.com/showthread.php?t=2551113 down load the exploit follow the instructions it's very easy the exploit does it all. I am not sure if I needed to do this or not but I did to be safe I used fastboot and put stock recovery back. Just take the recovery.img from the FXZ and open a command prompt type in this command------> fastboot flash recovery recovery.img
You must be in fastboot obviously it will flash recovery back and you lose WP off. You then run MotoWpNoMo and it bypasses WP protection for ever or until OTA from what I have read. Open a command prompt and type in this command------> adb shell getprop ro.boot.write_protect to check if write protection is disabled it will return a value of "0". No more having to boot into recovery to make system changes that require writer protection off this is true root. Great job Jcase!!!!!!!!!!!!!!!!!!!!
Oh and we have stock recovery back and I beleive that voodoo ota root keeper works on 4.2.2 so I think we will have a very easy time upgrading to 4.4 and not have to re-root this is just a theory at this point.
I just tweeted Jcase looks like he tested this method it was the rumrunner team (beaups and fuses) that created this exploit.
Click to expand...
Click to collapse
you mean i can keep the root by flash back the stock recovery.img ? so i can still receive the ota , and have the root after update ?
I doubt that you can keep your root and take the OTA. It caused a whoping lot of problems last time around, and I don't see it being any different when we take KitKat either. Best to flash a stock version of the ROM, then take the update. You may still keep write protection off.
fat-fingered and Maxx-ed out.
Einsteindks said:
I doubt that you can keep your root and take the OTA. It caused a whoping lot of problems last time around, and I don't see it being any different when we take KitKat either. Best to flash a stock version of the ROM, then take the update. You may still keep write protection off.
fat-fingered and Maxx-ed out.
Click to expand...
Click to collapse
That is not necessarily true. The issue with the last update was taking the ota with root still installed. Voodoo still works on 4.2.2 so if you protect root and then unroot with voodoo you should be able to take the update and then restore root after the update. I used voodoo on the last update and kept root what screwed me was I lost write protection off. When I tried to run pwnmymoto it saw I was already rooted and wouldn't run the exploit so I was stuck till I could fxz and run pwnmymoto again. That won't happen here since we have write protection off script now. So you use voodoo then restore root then run motowpnomo and you will have root and write off protection.
bigv5150 said:
That is not necessarily true. The issue with the last update was taking the ota with root still installed. Voodoo still works on 4.2.2 so if you protect root and then unroot with voodoo you should be able to take the update and then restore root after the update. I used voodoo on the last update and kept root what screwed me was I lost write protection off. When I tried to run pwnmymoto it saw I was already rooted and wouldn't run the exploit so I was stuck till I could fxz and run pwnmymoto again. That won't happen here since we have write protection off script now. So you use voodoo then restore root then run motowpnomo and you will have root and write off protection.
Click to expand...
Click to collapse
root vs running your phone without a recovery. 2 different things , wouldn't you say? root was maintained through the OTA without any steps to hide it. rooting your phone doesn't mess up system updates. running without a recovery does.
Ok, so I am right in that when root is in place, it causes problems during updates (due to recovery used for WP off mode. Prob'ly the reason for most noob problems.). I wasn't aware that voodoo still worked. I certainly would've used it last time! I'll try it next time. So, theoreticaly, having a clean root, run the WP script, flash the OE recovery back on, and, using voodoo, KK should take, as long as the factory ROM isn't altered? Ideally then, we should be able to restore root, and still have a WP off after KK? I'm guessing, to be on the safe side, safestrap should temporarily be uninstalled. Probably not necessary, but it couldn't hurt.
Edit: looks like voodoo wont work into 4.4, due to KK.
fat-fingered and Maxx-ed out.
mistermojorizin said:
root vs running your phone without a recovery. 2 different things , wouldn't you say? root was maintained through the OTA without any steps to hide it. rooting your phone doesn't mess up system updates. running without a recovery does.
Click to expand...
Click to collapse
I don't understand what you are trying to say we have full root now and stock recovery like any other android device. Taking an OTA root wont survive the reason why people boot looped had nothing to do with root as much as not having recovery. Once the OTA tried to install itself there was no recovery to install it hence the bootloop.
Einsteindks said:
Ok, so I am right in that when root is in place, it causes problems during updates (due to recovery used for WP off mode. Prob'ly the reason for most noob problems.). I wasn't aware that voodoo still worked. I certainly would've used it last time! I'll try it next time. So, theoreticaly, having a clean root, run the WP script, flash the OE recovery back on, and, using voodoo, KK should take, as long as the factory ROM isn't altered? Ideally then, we should be able to restore root, and still have a WP off after KK? I'm guessing, to be on the safe side, safestrap should temporarily be uninstalled. Probably not necessary, but it couldn't hurt.
Edit: looks like voodoo wont work into 4.4, due to KK.
fat-fingered and Maxx-ed out.
Click to expand...
Click to collapse
Correct but most of us have probably altered the system in one way or another and will have to fxz for a clean system to take update.
Voodoo wont work on 4.4 it works for 4.2.2 but I see what you are saying it may not restore root once on 4.4. That I am unsure of since I don't believe any one has tried it. Worst case scenario it doesn't restore root and you have to re-root then install stock recovery then run motowpnomo. I can't see the harm in trying.
this is not a root tool correct just RW tool?
StankFiss said:
this is not a root tool correct just RW tool?
Click to expand...
Click to collapse
Yep
fat-fingered and Maxx-ed out.
bigv5150 said:
Ok guys it looks like Jcase did it again he created an exploit that gets write protecton off for good or until an OTA. He states this will survive even an FXZ or factory data reset.
Here is what I did took about 15 min. go here ---->http://forum.xda-developers.com/showthread.php?t=2551113 down load the exploit follow the instructions it's very easy the exploit does it all. I am not sure if I needed to do this or not but I did to be safe I used fastboot and put stock recovery back. Just take the recovery.img from the FXZ and open a command prompt type in this command------> fastboot flash recovery recovery.img
You must be in fastboot obviously it will flash recovery back and you lose WP off. You then run MotoWpNoMo and it bypasses WP protection for ever or until OTA from what I have read. Open a command prompt and type in this command------> adb shell getprop ro.boot.write_protect to check if write protection is disabled it will return a value of "0". No more having to boot into recovery to make system changes that require writer protection off this is true root. Great job Jcase!!!!!!!!!!!!!!!!!!!!
Oh and we have stock recovery back and I beleive that voodoo ota root keeper works on 4.2.2 so I think we will have a very easy time upgrading to 4.4 and not have to re-root this is just a theory at this point.
I just tweeted Jcase looks like he tested this method it was the rumrunner team (beaups and fuses) that created this exploit.
Click to expand...
Click to collapse
Am I the only one who noticed that this is totally missed credited? Jcase had nothing to do with this exploit. He is thanked for his contribution of root access that allows for it but that is all.
Sent from my XT1080 using XDA Premium 4 mobile app
TheWhiteChallenger said:
Am I the only one who noticed that this is totally missed credited? Jcase had nothing to do with this exploit. He is thanked for his contribution of root access that allows for it but that is all.
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I guess so because everyone else knows how to read maybe you should read the WHOLE POST!!!!! is says at the end that "I just tweeted Jcase looks like he tested this method it was the rumrunner team (beaups and fuses) that created this exploit". I mean it's actually in your post where you quoted me "reading comprehension it's a wonderful thing".
Crud. Just tried this, and it says driver errors and some junk. I KNOW everything IS installed, I put stock recovery back first. Security things/firewall off, to. Any ideas?
Edit: scratch request...was starting in fastboot mode...oops.
fat-fingered and Maxx-ed out.
Einsteindks said:
Crud. Just tried this, and it says driver errors and some junk. I KNOW everything IS installed, I put stock recovery back first. Security things/firewall off, to. Any ideas?
Edit: scratch request...was starting in fastboot mode...oops.
fat-fingered and Maxx-ed out.
Click to expand...
Click to collapse
Lol can't tell you how many times I have made that mistake. Also using the wrong USB port for rsd and it doesn't see my phone.
I'm getting confused reading all of the posts that seem to be more about upgrading and rooting than this actual exploit. But my question is this.... I am rooted through jcase's exploit ("pwnmymoto" i think it's called) and still on the original firmware (pre camera update) with no recovery. Can i run this permanent WP killer from where my phone is now? Or do i have to flash the stock recovery back first? Also, will this wipe data?
To be honest, it's been a while since i flashed anything and i'm not real comfortable with the FXZ process just yet. All of my other phones have been highly supported by the devs and i have always had a utility to do all of the work for me. I'm hoping this will be pretty easy. I just want to know what i'm getting into before i soft brick my phone and have to wait days to figure out how to fix it.
I'm entirely new to anything phone/development related so I apologize for my ignorance (I also apologize if this is in the wrong section). I've had a razr M for about 2 years now and I'm entirely content with it except after the last update I can no longer use my foxfi for wifi access. From what I understand I can't root my phone and downgrade from this operating system so my question is this: Can I buy a new one off ebay for ~$100, root it and use foxfi (or some other free wifi tether) while keeping my unlimited data and not "bricking" it? The battery on my current phone has gone to crap anyways and I was considering buying a replacement phone considering they're only ~$100 anyways.
It's a pain in the but trying to figure all of this out with only limited time to browse the internet at work and trying to sort the 100's of pages of info from my phone.
Is this feasible? Are there certain things I need to verify about a phone before I buy it to make sure I can complete this process?
Thanks in advance,
Rory
If you're on the latest firmware, you CAN root with Towel Root and unlock with Motopocalypse. Then you can downgrade back to JB. There's a method posted by @bweN diorD somewhere in this forum.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
If you're on the latest firmware, you CAN root with Towel Root and unlock with Motopocalypse. Then you can downgrade back to JB. There's a method posted by @bweN diorD somewhere in this forum.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Thanks RikRong! How do I know if I'm on the latest firmware (does that just mean the latest operating system? My phone says 4.4.2 so I'm assuming that's a yes)? Sorry, there's a thousand new terms and I'm struggling to take in what this all means.
When it comes to trying to root my phone, since I have no more foxfi I also don't have a way to have internet access on my computer/tablet to walk me through the rooting process/assist me if something goes wrong with the... would you think it's intuitive enough/fullproof that if I print out the thread I can just follow it through and shouldn't have issues? Also, I looked through the first 4 or 5 pages in this forum and didn't find any threads started by "bweN dior" but I'm probably just overlooking what I'm looking for. Do you know what the thread was titled?
Thanks,
Rory
http://forum.xda-developers.com/showthread.php?t=2783157
Install .apk and run
Profit
Don't forget to thank geohot
rypkr937 said:
Thanks RikRong! How do I know if I'm on the latest firmware (does that just mean the latest operating system? My phone says 4.4.2 so I'm assuming that's a yes)? Sorry, there's a thousand new terms and I'm struggling to take in what this all means.
When it comes to trying to root my phone, since I have no more foxfi I also don't have a way to have internet access on my computer/tablet to walk me through the rooting process/assist me if something goes wrong with the... would you think it's intuitive enough/fullproof that if I print out the thread I can just follow it through and shouldn't have issues? Also, I looked through the first 4 or 5 pages in this forum and didn't find any threads started by "bweN dior" but I'm probably just overlooking what I'm looking for. Do you know what the thread was titled?
Thanks,
Rory
Click to expand...
Click to collapse
actually, i didnt make a guide for this model. i made it for the hd/maxx hd. the root and bootloader unlock is the same and you can use those files, but you can NOT use any of the phone specific software in the guide or you will likely brick your phone.
http://forum.xda-developers.com/showthread.php?t=2789743
bweN diorD said:
actually, i didnt make a guide for this model. i made it for the hd/maxx hd. the root and bootloader unlock is the same and you can use those files, but you can NOT use any of the phone specific software in the guide or you will likely brick your phone.
http://forum.xda-developers.com/showthread.php?t=2789743
Click to expand...
Click to collapse
Yeah, I saw that it was someone else that made the guide for the M, but I like how yours is set-up. I was going to point him to your thread in the HD forum for rooting and unlocking, then refer him to guide in the M forum for downgrading. Use Bwen's guide to use Towel Root and Motopocalypse. Get TWRP from here: http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img and flash a SU zip to gain permanent root. Then use this guide to downgrade: http://forum.xda-developers.com/showthread.php?t=2786016 .
RikRong said:
Yeah, I saw that it was someone else that made the guide for the M, but I like how yours is set-up. I was going to point him to your thread in the HD forum for rooting and unlocking, then refer him to guide in the M forum for downgrading. Use Bwen's guide to use Towel Root and Motopocalypse. Get TWRP from here: http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img and flash a SU zip to gain permanent root. Then use this guide to downgrade: http://forum.xda-developers.com/showthread.php?t=2786016 .
Click to expand...
Click to collapse
Okay, I'm trying to start this process. From my droid, I downloaded http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img but immediately I'm encountering problems. My phone says it cannot open this file. I'm already dreading this is going to be difficult/dangerous...
Why can't I open this file? Also, what is flashing a SU zip?
There is far too much about this I don't understand.
I am willing to pay someone to root a razr m for me. Do I have any takers?
Towel Root and Motopocalypse are both apps that you can download to the phone and then run. They're just apps, so they are as easy as opening the app then running. You need to use Towel Root, then Motopocalypse to unlock, and then you can install TWRP. If you don't want to use fastboot to install recovery, then you can flash it with Rashr or Flashify. Just download TWRP and place on your external SD, no need to open or extract it. Flash it with one of those apps. Once you're rooted and unlocked, you should be able to use that guide to downgrade.
Sent from my HTC6525LVW using Tapatalk
rypkr937 said:
Okay, I'm trying to start this process. From my droid, I downloaded http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img but immediately I'm encountering problems. My phone says it cannot open this file. I'm already dreading this is going to be difficult/dangerous...
Why can't I open this file? Also, what is flashing a SU zip?
Click to expand...
Click to collapse
just use the tutorial i posted before as a guide, substituting the files @RikRong gave you for the recoveries.
i just updated the guide to include a complete step by step for flashing the recoveries and su zip.
the only thing you will need is fastboot and adb in the same folder with your recovery file.
the guide instructs to use adb and fastboot from my script, but you wont have my script. thats why you need to grab adb and fastboot from google.
its not difficult, you just dont understand what needs to be done. you dont open the recovery with the phone booted up. just read the guide and subsequent link to the step by step and you will quickly see where you are going wrong.
http://forum.xda-developers.com/showthread.php?t=2789743
just a quick disclaimer for those not following along, ^^^^^ the firmware and recoveries in this guide are for the 926 only!!! use it for reference only!! any other files in the guide and the guide itself, is universal.
rypkr937 said:
There is far too much about this I don't understand.
I am willing to pay someone to root a razr m for me. Do I have any takers?
Click to expand...
Click to collapse
Please refer to this thread > http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Now I think I got problems. I thought I had it all figured out with all of the walkthroughs. I have the phone in fastboot mode and I was flashing it with RSD for the previous firmware. It was going through the steps and on 7/20 it said failed flash. I tried again and now it says failed flash after 1/20. I'm afraid to try and boot the phone. What should I do?
rypkr937 said:
Now I think I got problems. I thought I had it all figured out with all of the walkthroughs. I have the phone in fastboot mode and I was flashing it with RSD for the previous firmware. It was going through the steps and on 7/20 it said failed flash. I tried again and now it says failed flash after 1/20. I'm afraid to try and boot the phone. What should I do?
Click to expand...
Click to collapse
If your boot loader isn't unlocked, you can't flash older FW. Did you unlock already?
Sent from my HTC6525LVW using Tapatalk
rypkr937 said:
Now I think I got problems. I thought I had it all figured out with all of the walkthroughs. I have the phone in fastboot mode and I was flashing it with RSD for the previous firmware. It was going through the steps and on 7/20 it said failed flash. I tried again and now it says failed flash after 1/20. I'm afraid to try and boot the phone. What should I do?
Click to expand...
Click to collapse
It says USB error. I unplugged it from the computer and tried it again. It's step 7/20 "flash modem "non-hlos.bin" where it is getting screwed up.
RikRong said:
If your boot loader isn't unlocked, you can't flash older FW. Did you unlock already?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Yes. I think? I did these steps successfully
-----------------------------------------
2. BOOTLOADER UNLOCKING
-----------------------------------------•Download Towel Root [XDA] [WEBSITE] - Disregard if you have previously rooted using Towel Root
•Download Motopocalypse [WEBSITE] [DOWNLOAD]
•Place both on external SDcard
•Install and run Towel Root
•Follow any in-app prompts
•Reboot
•Install and run Motopocalypse
•Follow any in-app prompts
•Reboot
•PROFIT!
My error specifically says this:
Failed flashing process. 7/20 flash modem "non-hlos.bin" -> USB error occurred while reading/writing.
I unplugged it and tried another USB port and it went through all the steps 20/20. Then it rebooted my phone and the phone says "please wait, this may take a few minutes". After several minutes RSD told me to "manually power on the phone". Since the phone was never shut off I couldn't do this so I unplugged the USB and replugged it in thinking maybe there was another USB error. RSD has now finished and says result is "PASS". However my phone still says "please wait, this may take a few minutes". Should I let me phone be or should I restart it?
rypkr937 said:
I unplugged it and tried another USB port and it went through all the steps 20/20. Then it rebooted my phone and the phone says "please wait, this may take a few minutes". After several minutes RSD told me to "manually power on the phone". Since the phone was never shut off I couldn't do this so I unplugged the USB and replugged it in thinking maybe there was another USB error. RSD has now finished and says result is "PASS". However my phone still says "please wait, this may take a few minutes". Should I let me phone be or should I restart it?
Click to expand...
Click to collapse
do the 3 button trick to get into flash mode and tell us what the status code is please.
bweN diorD said:
do the 3 button trick to get into flash mode and tell us what the status code is please.
Click to expand...
Click to collapse
power + volume up + down rebooted me to a screen that asked me to select my language (just as before). After selecting English it goes back to the "please wait this make take a few minutes" screen.
It's working!!!! I just ran RSD again (and this from the start on a usb 2.0 port as I read 3.0 can screw it up). This time it worked like a charm! I'm back on jellybean and posting from my laptop through a foxfi connection from my phone! SO thankful for this and those who did the write ups/walk throughs and posted in here! I got a lot of apps and setting to update ahead of me ugh. I'm going to do some donating here for the help! Thanks to those who posted in this thread and the ones who made those write ups and the app developers!
How do I keep my phone from automatically updating back to KK?? I didn't let it update when KK originally came out (I just kept clicking postpone) until about a month or two later it just updated on it's own. Well my phone just started automatically downloading a system update again. I put it in airplane mode but how do I keep this update from happening again and getting screwed by KK again?
I'm looking to root my s4, I just upgraded to lollipop and love it but there are some things I would like to do that require root. Hoping that someone can walk me through the process. Thanks in advance
Interested in this as well. Just need a point in the right direction. Thanks
I may be incorrect, but at the moment root for I337UCUGOC3 is only available via Flashfire.
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
motobiz said:
I may be incorrect, but at the moment root for I337UCUGOC3 is only available via Flashfire.
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Click to expand...
Click to collapse
So there is no straight root from 5.0.1 at the moment?
Aranace said:
So there is no straight root from 5.0.1 at the moment?
Click to expand...
Click to collapse
No. You have to downgrade to 4.4.2 first, root, then flash up to 5.0
Sent from my SAMSUNG-SGH-I337
Bumping an older thread.
I've been searching around the forums for a guide to downgrade and a link to the Stock 4.4.2 ROM. AT&T Upgrade happened inadvertently. I either wasn't paying attention or it happened automatically.
Found plenty of post saying the same thing but no trustworthy guide on how to downgrade effectively from 5.0.1 on the i337 to 4.4.2. Normally I'd be up for experimenting but a newborn has me a little sleep deprived and looking for an idiot guide.
TIA
smtelegadis said:
Bumping an older thread.
I've been searching around the forums for a guide to downgrade and a link to the Stock 4.4.2 ROM. AT&T Upgrade happened inadvertently. I either wasn't paying attention or it happened automatically.
Found plenty of post saying the same thing but no trustworthy guide on how to downgrade effectively from 5.0.1 on the i337 to 4.4.2. Normally I'd be up for experimenting but a newborn has me a little sleep deprived and looking for an idiot guide.
TIA
Click to expand...
Click to collapse
Are you trying to get back to 4.4.2 then attempt to upgrade too 5.0.1 root?
Yes, but it sounds like from the tone of that question that I might be screwed.
You can flash back to nb1, root with towelroot, and go to lollipop with the keeproot method. Look in the general forum for [GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap by guut13 and [How-To] Update to I337_OC3 - 5.0.1 and KeepRoot (4/7/2015) by muniz_ri.
schhy said:
No. You have to downgrade to 4.4.2 first, root, then flash up to 5.0
Click to expand...
Click to collapse
I also have a I337UCUGOC3 running 5.0.1.
Unfortunately yesterday my phone got messed up (I'll spare you all the details) and I had to do a factory reset. I am really unhappy about this because I wasn't able to backup properly with Titanium Backup since I'm not rooted. As a result, I now need to spend a bunch of hours getting my phone back to the way I like it. I am honestly not interested in flashing custom ROMs. I simply want to root so I can run Titanium Backup.
Based on your experience, how long might it typically take for a root guide to come out for this model? I'm trying to decide whether I should try to wait it out with my phone feeling "unfamiliar" to me - or if I should just go ahead and give up the idea of rooting / backing up.
Also, is there one site or forum (this thread???) where I would be able to find out how to root this model when it comes out? If so, where?
I would very much appreciate your advice!
Eliezer
EliezerB said:
I also have a I337UCUGOC3 running 5.0.1.
Unfortunately yesterday my phone got messed up (I'll spare you all the details) and I had to do a factory reset. I am really unhappy about this because I wasn't able to backup properly with Titanium Backup since I'm not rooted. As a result, I now need to spend a bunch of hours getting my phone back to the way I like it. I am honestly not interested in flashing custom ROMs. I simply want to root so I can run Titanium Backup.
Based on your experience, how long might it typically take for a root guide to come out for this model? I'm trying to decide whether I should try to wait it out with my phone feeling "unfamiliar" to me - or if I should just go ahead and give up the idea of rooting / backing up.
Also, is there one site or forum (this thread???) where I would be able to find out how to root this model when it comes out? If so, where?
I would very much appreciate your advice!
Eliezer
Click to expand...
Click to collapse
There is no way to root on OC3 at the moment. No clue on how long it'll take if a method even gets found. I recommend downgrading to NB1 using Odin then following the steps on herehttp://forum.xda-developers.com/showthread.php?t=3075814
. All downgrade file are on there too. Read through all steps and warning to prevent any problems
Sent from my SAMSUNG-SGH-I337
smtelegadis said:
Bumping an older thread.
I've been searching around the forums for a guide to downgrade and a link to the Stock 4.4.2 ROM. AT&T Upgrade happened inadvertently. I either wasn't paying attention or it happened automatically.
Found plenty of post saying the same thing but no trustworthy guide on how to downgrade effectively from 5.0.1 on the i337 to 4.4.2. Normally I'd be up for experimenting but a newborn has me a little sleep deprived and looking for an idiot guide.
TIA
Click to expand...
Click to collapse
FWIW my wife noted the user interface on her S4 suddenly completely changed. Looking at it when I got a chance I saw it was 5.0.1 (OC3). I actually don't know what it was previously. So AT&T is definitely pushing out the update.
Already on 5.0.1
I bought this ATT phone used, unlocked, and already on 5.0.1. We use it on the GoSmart Mobile network (owned/operated by T-Mobile). Today (a few weeks after the purchase), I get this message saying that there's an ATT software update available. How can ATT push an update to a phone not on their network? Will this update screw anything up? Will it re-network-lock it? I don't want to update this phone and, since it's my wife's phone, I don't want to risk a brick (I am in a similar situation with a baby and am quite sleep deprived). Previously, she had an HTC First (ATT phone use on GoSmart) and it notified us of an available update, but would not actually update (thank goodness). Do I actually have anything to worry about with this ATT update? Or is the notification just an annoyance? Thanks in advance.
>Joe
joeskippyxda said:
I bought this ATT phone used, unlocked, and already on 5.0.1. We use it on the GoSmart Mobile network (owned/operated by T-Mobile). Today (a few weeks after the purchase), I get this message saying that there's an ATT software update available. How can ATT push an update to a phone not on their network? Will this update screw anything up? Will it re-network-lock it? I don't want to update this phone and, since it's my wife's phone, I don't want to risk a brick (I am in a similar situation with a baby and am quite sleep deprived). Previously, she had an HTC First (ATT phone use on GoSmart) and it notified us of an available update, but would not actually update (thank goodness). Do I actually have anything to worry about with this ATT update? Or is the notification just an annoyance? Thanks in advance.
>Joe
Click to expand...
Click to collapse
The latest update, from 5.0.1, OC3 to 5.0.1 OC4 is a security update which is believed to be a response to the stagefreight bug. The update is relatively small, and should not "screw anything up." It will not affect network unlock.
As to why you're getting it on a non AT&T network, I'd guess that the update server determines the phone is an SGH-I337 and pushes the correct update for the phone.
How to root
Okay, so I have 5.0.1 with i337ucugoc3 and finally rooted it quite easily (after many failures).
I used WonderShare's MobileGo.
The process was actually very simple, but it was very confusing as to what the software actually wanted from me.
To make it easy, here's all you need:
1. Go to Settings->more->About Device
2. Tap on "Build number" seven (or more) times quicly
-- this will unlock the developer tools
3. Tap the back arrow
4. Tap "Developer options"
5. Tap on "USB debugging" to enable
6. Go to wondershare.com, download MobileGo, install
7. Run MobileGo
8. Connect your phone to your computer with a USB cable.
9. In MobileGo, click on the "One-Clock Root" button
You should be rooted quickly.
Not only that, it only installs SuperSU, and no malware.
10. Uninstall MobileGo if you don't want to keep it.
LoonCraz, thank you for your post. I have two questions about what you wrote:
looncraz said:
Okay, so I have 5.0.1 with i337ucugoc3 and finally rooted it quite easily (after many failures).
Click to expand...
Click to collapse
Would this work also for i337ucugoc4?
When you say "after many failures" - were there ever any negative consequences (something broken or bricking, etc.) from one of those failures - or just not getting root?
Thanks,
Eliezer
EliezerB said:
LoonCraz, thank you for your post. I have two questions about what you wrote:
Would this work also for i337ucugoc4?
When you say "after many failures" - were there ever any negative consequences (something broken or bricking, etc.) from one of those failures - or just not getting root?
Thanks,
Eliezer
Click to expand...
Click to collapse
I don't know, but supposedly it works very well with most versions.
None of my failed attempts left any bad effects, this program worked first shot :good:
Does the phone get wiped in the process - or does everything stay intact / in place?
The Wondershare MobileGo One-Click Root process successfully rooted my unlocked GS4 i337 (OC4) today, and confirmed by Root Checker. So easy!
looncraz said:
Okay, so I have 5.0.1 with i337ucugoc3 and finally rooted it quite easily (after many failures).
I used WonderShare's MobileGo.
The process was actually very simple, but it was very confusing as to what the software actually wanted from me.
To make it easy, here's all you need:
1. Go to Settings->more->About Device
2. Tap on "Build number" seven (or more) times quicly
-- this will unlock the developer tools
3. Tap the back arrow
4. Tap "Developer options"
5. Tap on "USB debugging" to enable
6. Go to wondershare.com, download MobileGo, install
7. Run MobileGo
8. Connect your phone to your computer with a USB cable.
9. In MobileGo, click on the "One-Clock Root" button
You should be rooted quickly.
Not only that, it only installs SuperSU, and no malware.
10. Uninstall MobileGo if you don't want to keep it.
Click to expand...
Click to collapse
this worked just fine....
I did it in my S4 i377 with 5.0.1 OC3
just download the trial and root it...
thanks!!!