Download Unsuccessful MSG - KK to N910VVRU1BOAF - Verizon Galaxy Note 4 General

I'm trying to root, then unlock my Retail phone. I heard it can be done on BOAF 5.0.1. I downgraded my phone to KK ANJ5 (details on what steps I took, here)
I actually did a Factory Data Wipe twice before beginning, although the instructions said I only needed to do it once (doing it twice shouldn't hurt).
When I tap the System Updates button, it appears to start downloading, then after a few minutes, I'll get an error message saying "Download Unsuccessful". I've done this several times. Why is this happening now? I've cleared everything. Could Verizon have pulled the update? Can I install the two files manually? If so, please point me to the right direction. Thanks.

Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.

Sizzlechest said:
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Click to expand...
Click to collapse
I took the latest safe upgrade, I think it's BP1 or something like that., to 5.1.1. THAT worked.

So basically we have to be on 5.1.1 ??
Sent from my SM-N910V using XDA Premium HD app

rrjskj said:
So basically we have to be on 5.1.1 ??
Sent from my SM-N910V using XDA Premium HD app
Click to expand...
Click to collapse
I'm just saying that's what for sure worked for me. KK didn't work at all. I don't know if you "have to" be on it or not.

JOSHSKORN said:
I'm just saying that's what for sure worked for me. KK didn't work at all. I don't know if you "have to" be on it or not.
Click to expand...
Click to collapse
I might give it a whirl if fix doesn't come soon. In the meantime could u point me in the right direction for the safe upgrade files and what Odin version ?? Thanks in advance.
Sent from my SM-N910V using XDA Premium HD app

http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!

Rom-Addict said:
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Click to expand...
Click to collapse
Already did it I appreciated.
Sent from my SM-N910V using XDA Premium HD app

I've had it work on boaf, bpa, bog5. kk wouldn't work for me. using king root 4.0,.all unlocks (n4.n4.bin. n4.fix) worked for me. bpa (5.1.1)required the emotion kernel to boot. also returned my original Cid to use kies to restore all apps & data, then odined back again, unlocked, rooted ect. be patient

Rom-Addict said:
http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
read everything!
Click to expand...
Click to collapse
What confused me and a few other people in that thread is that you NEED to flash that kernel before the SuperSU linked there if you want to root 5.1.1 firmware. I thought it was just if you had taken the OTA 5.1.1.

Sizzlechest said:
What confused me and a few other people in that thread is that you NEED to flash that kernel before the SuperSU linked there if you want to root 5.1.1 firmware. I thought it was just if you had taken the OTA 5.1.1.
Click to expand...
Click to collapse
This is what I did (I think). Kinda hard to remember everything. For more information, read through the HOWTO thread. I think I started posting at about page 9.
went ahead and did the safe upgrade via Odin
Swapped out my MicroSD card for a different one I had laying around
Unlocked my phone
Powered Down (If I could, or remove the battery)
Removed the MicroSD card (otherwise it would boot loop)
Connected to My Computer
Boot to Download Mode (DOWN ARROW+HOME+POWER BUTTON)
Flashed TWRP using Odin
Reinserted the original MicroSD Card (Different SD card than what was used during the unlock process, the same one I was using prior to unlocking)
Booted into TWRP (UP ARROW+HOME+POWER BUTTON)
It prompted me to install SuperUser, so I did, it caused a bootloop, so I pulled my battery.
Removed MicroSD Card, plugged it into my computer and put SuperSU.zip and a kernel (See this post) zip file on it, re-inserted the MicroSD into my phone
Booted to TWRP (UP ARROW+HOME+POWER BUTTON)
Flashed the two files I'd just put on my MicroSD (Not sure if a reboot is required or if they could be done at the same time, I rebooted each time)
I did not clear cache/dalvik. Not sure if that was necessary.
This is all what got me to where I'm at, now.

JOSHSKORN said:
This is what I did (I think). Kinda hard to remember everything. For more information, read through the HOWTO thread. I think I started posting at about page 9.
...
This is all what got me to where I'm at, now.
Click to expand...
Click to collapse
For 5.0.1, you don't need to flash a new kernel, so that's why it works. If you want to upgrade to N910VVRU2BPA1:
Download N910VVRU2BPA1_StockRestore.tar.md5.7z and uncompress with 7-zip.
Flash with Odin.
Reboot phone back into Download Mode and flash TWRP with Odin.
Copy MultiSystem-Kernel_LP-5.1.1.zip and BETA-SuperSU-v2.67-20160203160253-TruncatedBoot-Fix.zip to the phone's internal memory. (Include xposed-v75-sdk21-arm-arter97-snapdragon.zip if you want XPosed.)
Reboot to recovery and flash all three in the above order.
Wipe cache and Davlik cache. Reboot to system.

Sizzlechest said:
Flash N910VVRU2BOG5_StockRestore.tar.md5 using Odin. It will upgrade you and you will be able to convert your phone to developer mode using the steps in the thread.
Click to expand...
Click to collapse
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you

Jimmy8 said:
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Click to expand...
Click to collapse
There seems to be a bug in the detection routine on the program that changes the bootloader to developer when run on 4.4.4. If you want to follow the original directions, upgrade (first) to a 5.0.1 firmware since that is known to work with the unlocker and no new kernel needs to be flashed. If you get it to work for 5.0.1, then you can always upgrade to 5.1.1 or flash another rom.
If you want to try to go straight to 5.1.1 by flashing through Odin, you can try it. I'm almost positive you could downgrade to 5.0.1 if that doesn't work. (If you take the software upgrade through Verizon, you will have problems downgrading AFAIK.)

Sizzlechest said:
There seems to be a bug in the detection routine on the program that changes the bootloader to developer when run on 4.4.4. If you want to follow the original directions, upgrade (first) to a 5.0.1 firmware since that is known to work with the unlocker and no new kernel needs to be flashed. If you get it to work for 5.0.1, then you can always upgrade to 5.1.1 or flash another rom.
If you want to try to go straight to 5.1.1 by flashing through Odin, you can try it. I'm almost positive you could downgrade to 5.0.1 if that doesn't work. (If you take the software upgrade through Verizon, you will have problems downgrading AFAIK.)
Click to expand...
Click to collapse
Thanks I just upgraded through Verizon to 5.0.1 and I'll give that a try and see if it works if not I'll safe upgrade to 5.1.1 thanks

Jimmy8 said:
I'm on 4.4.4 is this what I need to do a lot of other people are having the problem of getting the commands to work on 4.4.4 and are asking the question of do we need to upgrade some aren't getting answered and some are being told different things I'm sorry for asking but I need to know so I can unlock my bootloader thank you
Click to expand...
Click to collapse
If that doesn't work, I recommend you rollback to 4.4.4 (you should be able to if you're on BOAF), then take the safe upgrade to BP1. Once you do that, you should be good to go. That is, I wasn't able to convert to developer mode on KK, but after taking the safe upgrade, I was. Maybe it had to do with the BOAF bootloader, and if that's the case, "maybe' you're ok doing it as is. Good luck. I'm sure you'll be back if it doesn't work, but if it DOES work, can you report back? In fact, I also have a thread in Q&A titled Root Survey. Please post there as well ONLY if you were able to successfully convert. I wanted to compile a list of users that were able to convert, where they were before they started, what worked, what didn't, and so far, all what I'm seeing is, is that starting from KK doesn't work, although we were told all along to keep KK. I also heard one user said that he had taken all OTAs to 5..1.1., still made the conversion process work, BUT, his phone was a developer phone to begin with but he accidentally locked it with a Retail ROM. I'm kind of a noob, myself, but from what I do know, I don't recommend taking any OTAs anyway past BOAF, otherwise the conversion "might not" happen, but there are a lot of people who have taken all OTAs so we'll see what happens with them.

JOSHSKORN said:
If that doesn't work, I recommend you rollback to 4.4.4 (you should be able to if you're on BOAF), then take the safe upgrade to BP1. Once you do that, you should be good to go. That is, I wasn't able to convert to developer mode on KK, but after taking the safe upgrade, I was. Maybe it had to do with the BOAF bootloader, and if that's the case, "maybe' you're ok doing it as is. Good luck. I'm sure you'll be back if it doesn't work, but if it DOES work, can you report back? In fact, I also have a thread in Q&A titled Root Survey. Please post there as well ONLY if you were able to successfully convert. I wanted to compile a list of users that were able to convert, where they were before they started, what worked, what didn't, and so far, all what I'm seeing is, is that starting from KK doesn't work, although we were told all along to keep KK. I also heard one user said that he had taken all OTAs to 5..1.1., still made the conversion process work, BUT, his phone was a developer phone to begin with but he accidentally locked it with a Retail ROM. I'm kind of a noob, myself, but from what I do know, I don't recommend taking any OTAs anyway past BOAF, otherwise the conversion "might not" happen, but there are a lot of people who have taken all OTAs so we'll see what happens with them.
Click to expand...
Click to collapse
I can't even get king root to root it constantly reboots my phone during rooting process I've tried different versions and it doesn't matter do you have any suggestions or point me in the direction to roll back to 4.4.4 I've been out of the game for a while so I've forgotten a lot of stuff on how to do this thank for all your help so far

Jimmy8 said:
I can't even get king root to root it constantly reboots my phone during rooting process I've tried different versions and it doesn't matter do you have any suggestions or point me in the direction to roll back to 4.4.4 I've been out of the game for a while so I've forgotten a lot of stuff on how to do this thank for all your help so far
Click to expand...
Click to collapse
Believe me, I'm with you right there, as well, been out of the game for so long. Thanks Verizon Retail locking. Anyway....
Where are you right now? Your Android version/Build Number.

joshskorn said:
believe me, i'm with you right there, as well, been out of the game for so long. Thanks verizon retail locking. Anyway....
Where are you right now? Your android version/build number.
Click to expand...
Click to collapse
5.0.1 / n910vvru1boaf

Related

Flashed custom recovery, WiFi broken

I have an SGH-I337 with Android version 4.4. I have the Knox bootloader (sadface). I attempted to root this phone previously using Saferoot but this caused problems (relevant thread).
I can connect to the data network but I can't get the wifi to work. It won't even turn on. As soon as I tap the switch it goes back off.
Please help.
You'll probably have to use the NB1 full ODIN to fix it. Make sure to back up your internal storage and anything that doesn't sync to your Google or Samsung account.
Sent from my GT-I9505 using xda app-developers app
DeadlySin9 said:
You'll probably have to use the NB1 full ODIN to fix it. Make sure to back up your internal storage and anything that doesn't sync to your Google or Samsung account.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Ok, I'll try that.
While I have your attention, I have a couple other questions...
- Do you know if this phone is actively being worked on by developers? As in, are exploits being researched to unlock the bootloader?
- Can the phone be rooted with an update? What is the preferred method to do this? Recovery (I have teamwin) or ADB?
EDIT: Is it safe to flash just the modem or would you recommend the full phone firmware. I found a thread here with firmware.
goose90proof said:
Ok, I'll try that.
While I have your attention, I have a couple other questions...
- Do you know if this phone is actively being worked on by developers? As in, are exploits being researched to unlock the bootloader?
- Can the phone be rooted with an update? What is the preferred method to do this? Recovery (I have teamwin) or ADB?
EDIT: Is it safe to flash just the modem or would you recommend the full phone firmware. I found a thread here with firmware.
Click to expand...
Click to collapse
The phone is actively being worked on, most progress is kept between PM's or in a thread in the Verizon S4 section (they're in the same boat as us and chances are an exploit for one will work on both).
The phone can not be rooted with an update because we can't sign it once we add the su binary.
You can't flash the modem as those are recovery flashable zips and if you're on NB1 you can't get root or recovery without a more involved method first (no simple one click).
DeadlySin9 said:
The phone is actively being worked on, most progress is kept between PM's or in a thread in the Verizon S4 section (they're in the same boat as us and chances are an exploit for one will work on both).
The phone can not be rooted with an update because we can't sign it once we add the su binary.
You can't flash the modem as those are recovery flashable zips and if you're on NB1 you can't get root or recovery without a more involved method first (no simple one click).
Click to expand...
Click to collapse
Thanks much for verifying that for me. I'm content to wait until a solution is found. Just relieved to hear that the smarties are still tinkering with it. :good:
I guess I don't have TeamWin then? That's odd because after my failed root attempt, it was after I tried flashing teamwin that the phone booted back on after being softbricked. I guess that was coincidence then. At any rate, I will try to flash the NB1 firmware to fix the wifi. At least I have data. :silly:
WiFi issues with OTA firmware too
Just thought I'd add that the OFW has WiFi issues as well, at least for a few if us. When I updated OTA to 4.4 the WiFi worked for a couple of weeks then stopped working (reboot will allow it to work for a while until the unit sleeps, then it won't toggle). I tried the Odin tar.md5 image and the same thing crops up. This thread is relevant: [Q] OFW 4.4.2 WiFi Not Turning On. I like KitKat, hopefully we can figure out what the problem is.
goose90proof said:
Thanks much for verifying that for me. I'm content to wait until a solution is found. Just relieved to hear that the smarties are still tinkering with it. :good:
I guess I don't have TeamWin then? That's odd because after my failed root attempt, it was after I tried flashing teamwin that the phone booted back on after being softbricked. I guess that was coincidence then. At any rate, I will try to flash the NB1 firmware to fix the wifi. At least I have data. :silly:
Click to expand...
Click to collapse
You likely overwrote the stock recovery. Here is the NB! stock recovery. Flash in PDA slot in Odin:https://mega.co.nz/#!M9EQBT5A!ri4QeMYpgi-JjmUGZ3FY2gtogDBWPEL7zRCjASIcVe8
If you need the NB1 stock modem here it is. Also flash in PDA slot in odin: https://mega.co.nz/#!sstkFRiJ!d9zTRte0KcVFv7o-bjKFuFMM1Q9ivzDlqJKy2OlP_7o
Excellent thank you.
goose90proof said:
Excellent thank you.
Click to expand...
Click to collapse
did it work for you?
I haven't gotten around to trying it. The phone is working now so I'm a bit reluctant to do anything to it until future developments bear fruit.

[Q] Samsung Galaxy S4 AT&T root for I337UCUGOC3

I'm looking to root my s4, I just upgraded to lollipop and love it but there are some things I would like to do that require root. Hoping that someone can walk me through the process. Thanks in advance
Interested in this as well. Just need a point in the right direction. Thanks
I may be incorrect, but at the moment root for I337UCUGOC3 is only available via Flashfire.
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
motobiz said:
I may be incorrect, but at the moment root for I337UCUGOC3 is only available via Flashfire.
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Click to expand...
Click to collapse
So there is no straight root from 5.0.1 at the moment?
Aranace said:
So there is no straight root from 5.0.1 at the moment?
Click to expand...
Click to collapse
No. You have to downgrade to 4.4.2 first, root, then flash up to 5.0
Sent from my SAMSUNG-SGH-I337
Bumping an older thread.
I've been searching around the forums for a guide to downgrade and a link to the Stock 4.4.2 ROM. AT&T Upgrade happened inadvertently. I either wasn't paying attention or it happened automatically.
Found plenty of post saying the same thing but no trustworthy guide on how to downgrade effectively from 5.0.1 on the i337 to 4.4.2. Normally I'd be up for experimenting but a newborn has me a little sleep deprived and looking for an idiot guide.
TIA
smtelegadis said:
Bumping an older thread.
I've been searching around the forums for a guide to downgrade and a link to the Stock 4.4.2 ROM. AT&T Upgrade happened inadvertently. I either wasn't paying attention or it happened automatically.
Found plenty of post saying the same thing but no trustworthy guide on how to downgrade effectively from 5.0.1 on the i337 to 4.4.2. Normally I'd be up for experimenting but a newborn has me a little sleep deprived and looking for an idiot guide.
TIA
Click to expand...
Click to collapse
Are you trying to get back to 4.4.2 then attempt to upgrade too 5.0.1 root?
Yes, but it sounds like from the tone of that question that I might be screwed.
You can flash back to nb1, root with towelroot, and go to lollipop with the keeproot method. Look in the general forum for [GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap by guut13 and [How-To] Update to I337_OC3 - 5.0.1 and KeepRoot (4/7/2015) by muniz_ri.
schhy said:
No. You have to downgrade to 4.4.2 first, root, then flash up to 5.0
Click to expand...
Click to collapse
I also have a I337UCUGOC3 running 5.0.1.
Unfortunately yesterday my phone got messed up (I'll spare you all the details) and I had to do a factory reset. I am really unhappy about this because I wasn't able to backup properly with Titanium Backup since I'm not rooted. As a result, I now need to spend a bunch of hours getting my phone back to the way I like it. I am honestly not interested in flashing custom ROMs. I simply want to root so I can run Titanium Backup.
Based on your experience, how long might it typically take for a root guide to come out for this model? I'm trying to decide whether I should try to wait it out with my phone feeling "unfamiliar" to me - or if I should just go ahead and give up the idea of rooting / backing up.
Also, is there one site or forum (this thread???) where I would be able to find out how to root this model when it comes out? If so, where?
I would very much appreciate your advice!
Eliezer
EliezerB said:
I also have a I337UCUGOC3 running 5.0.1.
Unfortunately yesterday my phone got messed up (I'll spare you all the details) and I had to do a factory reset. I am really unhappy about this because I wasn't able to backup properly with Titanium Backup since I'm not rooted. As a result, I now need to spend a bunch of hours getting my phone back to the way I like it. I am honestly not interested in flashing custom ROMs. I simply want to root so I can run Titanium Backup.
Based on your experience, how long might it typically take for a root guide to come out for this model? I'm trying to decide whether I should try to wait it out with my phone feeling "unfamiliar" to me - or if I should just go ahead and give up the idea of rooting / backing up.
Also, is there one site or forum (this thread???) where I would be able to find out how to root this model when it comes out? If so, where?
I would very much appreciate your advice!
Eliezer
Click to expand...
Click to collapse
There is no way to root on OC3 at the moment. No clue on how long it'll take if a method even gets found. I recommend downgrading to NB1 using Odin then following the steps on herehttp://forum.xda-developers.com/showthread.php?t=3075814
. All downgrade file are on there too. Read through all steps and warning to prevent any problems
Sent from my SAMSUNG-SGH-I337
smtelegadis said:
Bumping an older thread.
I've been searching around the forums for a guide to downgrade and a link to the Stock 4.4.2 ROM. AT&T Upgrade happened inadvertently. I either wasn't paying attention or it happened automatically.
Found plenty of post saying the same thing but no trustworthy guide on how to downgrade effectively from 5.0.1 on the i337 to 4.4.2. Normally I'd be up for experimenting but a newborn has me a little sleep deprived and looking for an idiot guide.
TIA
Click to expand...
Click to collapse
FWIW my wife noted the user interface on her S4 suddenly completely changed. Looking at it when I got a chance I saw it was 5.0.1 (OC3). I actually don't know what it was previously. So AT&T is definitely pushing out the update.
Already on 5.0.1
I bought this ATT phone used, unlocked, and already on 5.0.1. We use it on the GoSmart Mobile network (owned/operated by T-Mobile). Today (a few weeks after the purchase), I get this message saying that there's an ATT software update available. How can ATT push an update to a phone not on their network? Will this update screw anything up? Will it re-network-lock it? I don't want to update this phone and, since it's my wife's phone, I don't want to risk a brick (I am in a similar situation with a baby and am quite sleep deprived). Previously, she had an HTC First (ATT phone use on GoSmart) and it notified us of an available update, but would not actually update (thank goodness). Do I actually have anything to worry about with this ATT update? Or is the notification just an annoyance? Thanks in advance.
>Joe
joeskippyxda said:
I bought this ATT phone used, unlocked, and already on 5.0.1. We use it on the GoSmart Mobile network (owned/operated by T-Mobile). Today (a few weeks after the purchase), I get this message saying that there's an ATT software update available. How can ATT push an update to a phone not on their network? Will this update screw anything up? Will it re-network-lock it? I don't want to update this phone and, since it's my wife's phone, I don't want to risk a brick (I am in a similar situation with a baby and am quite sleep deprived). Previously, she had an HTC First (ATT phone use on GoSmart) and it notified us of an available update, but would not actually update (thank goodness). Do I actually have anything to worry about with this ATT update? Or is the notification just an annoyance? Thanks in advance.
>Joe
Click to expand...
Click to collapse
The latest update, from 5.0.1, OC3 to 5.0.1 OC4 is a security update which is believed to be a response to the stagefreight bug. The update is relatively small, and should not "screw anything up." It will not affect network unlock.
As to why you're getting it on a non AT&T network, I'd guess that the update server determines the phone is an SGH-I337 and pushes the correct update for the phone.
How to root
Okay, so I have 5.0.1 with i337ucugoc3 and finally rooted it quite easily (after many failures).
I used WonderShare's MobileGo.
The process was actually very simple, but it was very confusing as to what the software actually wanted from me.
To make it easy, here's all you need:
1. Go to Settings->more->About Device
2. Tap on "Build number" seven (or more) times quicly
-- this will unlock the developer tools
3. Tap the back arrow
4. Tap "Developer options"
5. Tap on "USB debugging" to enable
6. Go to wondershare.com, download MobileGo, install
7. Run MobileGo
8. Connect your phone to your computer with a USB cable.
9. In MobileGo, click on the "One-Clock Root" button
You should be rooted quickly.
Not only that, it only installs SuperSU, and no malware.
10. Uninstall MobileGo if you don't want to keep it.
LoonCraz, thank you for your post. I have two questions about what you wrote:
looncraz said:
Okay, so I have 5.0.1 with i337ucugoc3 and finally rooted it quite easily (after many failures).
Click to expand...
Click to collapse
Would this work also for i337ucugoc4?
When you say "after many failures" - were there ever any negative consequences (something broken or bricking, etc.) from one of those failures - or just not getting root?
Thanks,
Eliezer
EliezerB said:
LoonCraz, thank you for your post. I have two questions about what you wrote:
Would this work also for i337ucugoc4?
When you say "after many failures" - were there ever any negative consequences (something broken or bricking, etc.) from one of those failures - or just not getting root?
Thanks,
Eliezer
Click to expand...
Click to collapse
I don't know, but supposedly it works very well with most versions.
None of my failed attempts left any bad effects, this program worked first shot :good:
Does the phone get wiped in the process - or does everything stay intact / in place?
The Wondershare MobileGo One-Click Root process successfully rooted my unlocked GS4 i337 (OC4) today, and confirmed by Root Checker. So easy!
looncraz said:
Okay, so I have 5.0.1 with i337ucugoc3 and finally rooted it quite easily (after many failures).
I used WonderShare's MobileGo.
The process was actually very simple, but it was very confusing as to what the software actually wanted from me.
To make it easy, here's all you need:
1. Go to Settings->more->About Device
2. Tap on "Build number" seven (or more) times quicly
-- this will unlock the developer tools
3. Tap the back arrow
4. Tap "Developer options"
5. Tap on "USB debugging" to enable
6. Go to wondershare.com, download MobileGo, install
7. Run MobileGo
8. Connect your phone to your computer with a USB cable.
9. In MobileGo, click on the "One-Clock Root" button
You should be rooted quickly.
Not only that, it only installs SuperSU, and no malware.
10. Uninstall MobileGo if you don't want to keep it.
Click to expand...
Click to collapse
this worked just fine....
I did it in my S4 i377 with 5.0.1 OC3
just download the trial and root it...
thanks!!!

I messed up :(

So I am trying to reset my Verizon Galaxy S5 to BS_FREE_Lolipop but I messed up and now my phone won't boot up, it says Software Update failed... So what I did was download the files he provided and tried to load https://www.androidfilehost.com/?fid=24052804347776876 and it didn't work and I am where I am now. I just want to get root access to be able to install BS_FREE_Lollipop on my phone someone please help
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784 go there and downgrade to NCG then reroot
Veid71 said:
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784 go there and downgrade to NCG then reroot
Click to expand...
Click to collapse
Thanks I'll try that I hope it works
Griingo said:
Thanks I'll try that I hope it works
Click to expand...
Click to collapse
np lemmi know how it goes and if it helps
Veid71 said:
np lemmi know how it goes and if it helps
Click to expand...
Click to collapse
Okay so I just around to looking at that thread but that won't work, my phone is bricked right now I can't turn it on without it saying I need to repair it I can only put the phone in download mode :/
Griingo said:
Okay so I just around to looking at that thread but that won't work, my phone is bricked right now I can't turn it on without it saying I need to repair it I can only put the phone in download mode :/
Click to expand...
Click to collapse
yup thats what you do you put it into download mode flash Full Wipe G900V_Downgrade_to_NCG.tar (its located on step 4 in the notes section) using odin on your computer (you connect your phone to computer) then you redownload towelroot super su busy box and safestrap and youre rooted then you can choose to upgrade to whatever version or thing you want in your case bsfreelollipop
Griingo said:
So I am trying to reset my Verizon Galaxy S5 to BS_FREE_Lolipop but I messed up and now my phone won't boot up, it says Software Update failed... So what I did was download the files he provided and tried to load https://www.androidfilehost.com/?fid=24052804347776876 and it didn't work and I am where I am now. I just want to get root access to be able to install BS_FREE_Lollipop on my phone someone please help
Click to expand...
Click to collapse
You wrote you want to reset your phone to the BS free ROM, but then at the end you write you want to get root access. What state was your phone in when you started to try this? Was your phone already rooted? Was your phone already rooted and on BS free ROM and just needed to clean up your phone and get back onto the BS free ROM? If you were not already rooted and had taken the Verizon OTA updates to Lollipop, chances are good you cannot root your phone, and therefore you cannot run the BS Free ROM. Let us know what state your phone was in when you started this so we can help you better.
Griingo said:
So I am trying to reset my Verizon Galaxy S5 to BS_FREE_Lolipop but I messed up and now my phone won't boot up, it says Software Update failed... So what I did was download the files he provided and tried to load https://www.androidfilehost.com/?fid=24052804347776876 and it didn't work and I am where I am now. I just want to get root access to be able to install BS_FREE_Lollipop on my phone someone please help
Click to expand...
Click to collapse
What software version you're on and did you have root before you tried to reset to Verizon Galaxy S5 to BS_FREE_Lolipop??
To reply to everyone the only thing I ever did with the phone was update to 5.0 If I can't get root no big deal but I really want to install something that gets rid of all the Verizon junk apps :/
Griingo said:
To reply to everyone the only thing I ever did with the phone was update to 5.0 If I can't get root no big deal but I really want to install something that gets rid of all the Verizon junk apps :/
Click to expand...
Click to collapse
If you never rooted your phone and you took all of the Verizon OTA updates to 5.0 you are most likely on OG5 and cannot root your phone. If you took an OTA update in the past few days before trying this, you may have been on the latest OK3 security patch update. Your best bet would probably be to find the OG5 full factory tar file and flash it in ODIN to get your phone back to a working state. I think there is a thread in the general section where you can find the file you need.
landshark68 said:
If you never rooted your phone and you took all of the Verizon OTA updates to 5.0 you are most likely on OG5 and cannot root your phone. If you took an OTA update in the past few days before trying this, you may have been on the latest OK3 security patch update. Your best bet would probably be to find the OG5 full factory tar file and flash it in ODIN to get your phone back to a working state. I think there is a thread in the general section where you can find the file you need.
Click to expand...
Click to collapse
Okay I'll try that, and what about after I get it working, can I install any new ROM or whatever to get rid of all the verizon junk?
Griingo said:
Okay I'll try that, and what about after I get it working, can I install any new ROM or whatever to get rid of all the verizon junk?
Click to expand...
Click to collapse
No. No root means no custom ROMs.
landshark68 said:
No. No root means no custom ROMs.
Click to expand...
Click to collapse
Well I was able to repair it finally using the tool, I'm still on 5.0 so I'm guessing I'm screwed... What about downgrading and then doing root / custom ROM? Or am I just screwed all together LOL I'd just sell the phone at this point since I no longer have Verizon (they're ****) but still have the phone.
Griingo said:
Well I was able to repair it finally using the tool, I'm still on 5.0 so I'm guessing I'm screwed... What about downgrading and then doing root / custom ROM? Or am I just screwed all together LOL I'd just sell the phone at this point since I no longer have Verizon (they're ****) but still have the phone.
Click to expand...
Click to collapse
Sorry to keep saying no, but if you are on OE1, OG5, or the new OK3 you cannot downgrade. You are stuck where you are.

SM-G900V on 442 - want to upgrade without losing root

Hi. Couple years back, I used Towelroot to mindlessly root my SM-G900V on version 4.4.2 (no CWM, stock bootloader, locked, thanks Verizon!). Google Now crashes the minute I open it and I figure it's time to update from 4.4.2 to 5 or whatever is stable these days. I'm paranoid to do this without running it by you gurus here, because I don't want to lose root, brick my phone, or turn it into a flaming fireball of doom. Can someone point me to a thread I overlooked or just type a few easy-to-follow steps with link to ROM so I can upgrade my Galaxy S5?
Is a downgrade back to 4.4.2 possible if I don't like the upgrade?
Thanks in advance!
androidman807 said:
Can someone point me to a thread I overlooked
Click to expand...
Click to collapse
https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
Thanks. I've spent a couple of hours and am on post 171 of the thread. I'm a CID 11 that needs to follow those steps on post 3. Regardless, this seems to be designed to take me from Kitkat to Marshmallow, skipping me right past the land of Lollipop. I haven't tried it yet, but 2 questions:
1) once in Marshmallow, can I get back to Lollipop or Kitkat?
2) the intro to the steps say that CID=11 needs SafeStrap or Flashfire, but the actual steps never mention Flashfire (only safestrap). Is it truly either/or, or is there an advantage to SS?
Thanks!
bbsc said:
https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
Click to expand...
Click to collapse
1. Lollipop - yes, Kitkat - no.
2. You still can use SS on MM. It's a little tricky but still possible.
Flashfire requires root so it will not work on MM for CID 11.
This thread may also be useful for understanding the things: https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
I'll check out that thread (thank you for that), but I'm confused by something you wrote: "Flashfire requires root so it will not work on MM for CID 11." My Kitkat currently has root. Are you suggesting that when I throw Marshmallow on it I'll lose it?
And if you all will allow me to hijack my own thread, is Marshmallow really worth the upgrade from Lollipop? Heck, is Lollipop that much better than Kitkat? I've got a (mostly) working rooted system now, and it sounds like I can go up to 6 and back down to 5, but never again back to 4, hopefully keeping root the whole journey.
Thanks for reading and helping a new guy out. I figure others will find this information helpful down the road, as 4.4.2 was easy to root.... but where (if anywhere) from here?
bbsc said:
1. Lollipop - yes, Kitkat - no.
2. You still can use SS on MM. It's a little tricky but still possible.
Flashfire requires root so it will not work on MM for CID 11.
This thread may also be useful for understanding the things: https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
Click to expand...
Click to collapse
androidman807 said:
My Kitkat currently has root. Are you suggesting that when I throw Marshmallow on it I'll lose it?
Click to expand...
Click to collapse
Yes.
You say your phone has CID11. For SM-G900V it means it has a locked bootloader that cannot be unlocked (currently, but most likely - never).
Locked bootloader is called so because it's locked to boot only certain digitally signed kernel (aka boot.img)
Root on MM requires a modified kernel which cannot be booted by a locked bootloader.
That's why you cannot have root on MM and will lose it when upgrading.
androidman807 said:
is Marshmallow really worth the upgrade from Lollipop?
Click to expand...
Click to collapse
Only you can answer for yourself.
What are you using root for?
I have 4 or 5 S5s (G900V) here running MM and only one (mine) is rooted. No claims so far They just work.
BTW, all of them are running Devbase-4.2 from Alexndr.
If you're on Verizon you may like one of stock debloated ROMs which can be found in this section.
Thanks for all your help.
Reading the first few posts here really helped a lot to get a background. Then I attempted the steps here you provided on post 3 for my 11.
I thought I could pick my build after reading painiac's post, and was shy about going all the way up to PB1, but all the ones I chose wouldn't TowelRoot. I really did have to follow the instructions as written and use the COMBINATION EMMC ROM provided there. It freaked me out at first that it ended me up in Kitkat, but the final step brought up Lollipop and completed the process well.
The one scary point is after I ran Titanium getting ready to put some apps back on and used the "restore previous ID" it gave a panic, took me back to recovery and froze... required removing the battery, where normally that just causes a reboot. I did read the part in Painiac's post where he says don't restore system app (I had to export and import my contacts using the phone app to SD card and not Titanium - that worked). I hope my "restore previous ID" didn't go against his advice.
Other than that, things seem to be working smoothly now. I'm on Lollipop PB1 and not sure I even need Marshmallow. Thanks for all your help.
bbsc said:
Yes.
You say your phone has CID11. For SM-G900V it means it has a locked bootloader that cannot be unlocked (currently, but most likely - never).
Locked bootloader is called so because it's locked to boot only certain digitally signed kernel (aka boot.img)
Root on MM requires a modified kernel which cannot be booted by a locked bootloader.
That's why you cannot have root on MM and will lose it when upgrading.
Only you can answer for yourself.
What are you using root for?
I have 4 or 5 S5s (G900V) here running MM and only one (mine) is rooted. No claims so far They just work.
BTW, all of them are running Devbase-4.2 from Alexndr.
If you're on Verizon you may like one of stock debloated ROMs which can be found in this section.
Click to expand...
Click to collapse
A couple of months back, I updated from Kitkat to Lollipop using the instructions below, and ever since, I've had two persistent problems, and I'm wondering if anyone else has:
1) Wi-fi cuts out every few days requiring a reboot fix. This seems to be related to DNS.
2) Receiving picture texts (MMS) show up as "Message size: 2KB Expires: (date)" with no way to download or view. I see no workaround other to tell friends to email me pictures instead of texting them.
I've tried a factory reset, but haven't gone back to Odin yet to try to put PB1 on again (or a different ROM?). The good news is SafeStrap recovery is on the phone now. What can I try next to resolve these two problems? I can live with them with the reboot and avoiding MMS, but they are not trivial.
Thanks for any guidance or advice. Please help.
androidman807 said:
Thanks for all your help.
Reading the first few posts here really helped a lot to get a background. Then I attempted the steps here you provided on post 3 for my 11.
I thought I could pick my build after reading painiac's post, and was shy about going all the way up to PB1, but all the ones I chose wouldn't TowelRoot. I really did have to follow the instructions as written and use the COMBINATION EMMC ROM provided there. It freaked me out at first that it ended me up in Kitkat, but the final step brought up Lollipop and completed the process well.
The one scary point is after I ran Titanium getting ready to put some apps back on and used the "restore previous ID" it gave a panic, took me back to recovery and froze... required removing the battery, where normally that just causes a reboot. I did read the part in Painiac's post where he says don't restore system app (I had to export and import my contacts using the phone app to SD card and not Titanium - that worked). I hope my "restore previous ID" didn't go against his advice.
Other than that, things seem to be working smoothly now. I'm on Lollipop PB1 and not sure I even need Marshmallow. Thanks for all your help.
Click to expand...
Click to collapse

Shortcut to being rooted on N910VVRU2CQI2

Here's my Cheat Sheet ! This is the same procedure I used a while back with N910VVRU2CPD1 . I just updated the thread to work with the newer package.
1. Odin SamMobile N910VVRU2BPA1
reboot and factory reset a few times if needed to remove custom icon
2. Odin hsbadr's N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar HERE
3. Unlock with the samsung_unlock_n4-fix PROCESS use SIM card for data. Wi-Fi will not work at this point.
4. Odin twrp-3.0.2-0-trltevzw.tar Uncheck Auto Reboot, Manually boot into TWRP
5. Odin hsbadr's N910VVRU2CPD1_StockRestore.tar HERE
6. TWRP BETA-SuperSU-v2.71-20160331103524, Factory Reset, boot system
7. Use FlashFire to Flash firmware package SamMobile N910VVRU2CQI2
( ! System and Cache only ! )
Your mileage may vary.
Before I install my personal apps I remove as much Verizon, Samsung and Google spyware as possible.
-------------------------------------------------------------------------------------------------
EDIT: I was able to skip the recommended rooting and unlocking of 5.1.1 and make the jump I described.
I did not do the unlock using Kingroot until step 3 and I did not permanent root with Super Su until step 6.
No matter how you get there the phone has to be on [Firmware] [MM] [6.0.1] [RetEd/DevEd] Safe Upgrade to Marshmallow [N910VVRU2CPD1] then you can use FlashFire.
Hyperlinks are in the text to most of what's needed.
Credit AstonsAndroid I found it HERE
I keep seeing people saying there is a way to just flash TWRP and Magisk and you're done. I'd like to avoid SuperSU and the other root methods if possible. How would that work with your updated guide? Thanks
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
RootMyNote4Please said:
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
Click to expand...
Click to collapse
I'm not sure if it was spyware or what. but my phone performance better after cleaning out that folder.
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
lodilovesmuffins said:
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
Click to expand...
Click to collapse
Kingroot needs to connected to root. I never seen it work without a connection. N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar brakes wifi but you get it back with N910VVRU2CPD1_StockRestore.tar, I dont know why. It just works
RootMyNote4Please said:
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
Click to expand...
Click to collapse
My best guess now is it's some kind of provisioning issue that is cleaned up. Some of the files deleted you may actually need some day.
does this require the developer version? btw how do i backup
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
RootMyNote4Please said:
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
Click to expand...
Click to collapse
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
kevintm78 said:
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
Click to expand...
Click to collapse
That's weird. I flashed SuperSU but it didn't show up in the apps and when I tried to use Flashfire it said I didn't have root.
Got there. SuperSU had an error message when I tried to install it the 1st time after flashing full system. So I rebooted and installed again. Now Flashfire crashes and won't open. Switched to Flashify and it seems to work ok.
Edit - Stuck here for now. Flashify can't seem to find the CQI2 file and I still haven't been able to get Flashfire to work. Tried an older version and still crashes when it checks to see if I have the pro version or not.
In case someone else has the same problem with Flashfire, it's because the program expired April 1st, 2018. Turn the date back on your phone and it will load.
Finally completed it!!!
Ok, so the things I learned from my trials and errors.
1) DON'T flash the kernal and SU after you root with the N4 fix. I did this the 1st 15 times and could never get Flashfire to work later on. So skip all of the stuff in that post after you flash TWRP. Then flash the next firmware step.
2) Uncheck auto time and date on your phone and roll it back to before 4/1/18 to get Flashfire to work.
I'm sure there are some more things and I'll add whatever else I think can help the next guy along. Good luck! And thanks for the guide doc!
Note: Did the phone icon on your lock screen disappear as well when you were done? The camera is there on the bottom right like normal, but the phone is gone on the bottom left and it displays the charging info there now.
Thanks for this - it was helpful to make clear that in my mind that despite what other guides say, there is no need to unlock a Lollipop bootloader with a Lollipop kernel + ROM first, and that we can boot a Lollipop kernel + ROM with a Marshmallow bootchain and unlock the Marshmallow bootloader from the get-go.
I tracked down the CQI2 full Odin and I made hybrid Odins that get you "rooted on N910VVRU2CQI2" in fewer steps, following hsbadr's file naming scheme:
N910VVRU2BPA1_N910VVRU2CQI2_FullFirmware.tar.md5: MM CQI2 bootchain/firmware/modem, LL BPA1 ROM/kernel/recovery
N910VVRU2CQI2_StockRestore.tar: MM CQI2 ROM/kernel (no recovery - TWRP isn't overwritten)
These should be fine as drop-in replacements for the files mentioned in steps 2 and 5 of your guide.
Using these obviously means that you are unlocking the CQI2 aboot instead of the CPD1 aboot in step 3 while temprooted, and - importantly - step 7 is unnecessary to get to a CQI2 ROM, which is good because Flashfire is now expired :3
I doubt there's much of a real benefit to being on the newer aboot, but hey, why not.
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
lodilovesmuffins said:
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
Click to expand...
Click to collapse
No, this will work with both versions of the verizon note 4.
kevintm78 said:
No, this will work with both versions of the verizon note 4.
Click to expand...
Click to collapse
Ok, thank you very much. I'll try and root my phone with this tutorial now.
Please help!!!!
I followed this link because its supposed to be a way to downgrade from 6.1.0 to 5.1.1 so I can unlock boot loader. However, these instructions make no sense to me. Can someone PLEASE help me. I've been searching and searching for a way to root my note 4 (N910VVRS2CQA1) and can't seem to find a way. I've never done this before so I'm pretty clueless. When I read these instructions, I just don't understand what I'm supposed to be doing. A lot of this tech lingo means nothing to me unfortunately. I'm starting to thing I should just give up the idea of rooting this Note 4 that's getting slower and slower and just get a new one. I don't really want to though bc I love the fact that you can replace the battery. It'd be much easier to just root and upgrade.....well, easier if I actually knew how.

Categories

Resources