Hey everyone!
I have never posted anything on a forum before, so please tell me if I do anything wrong. I have searched everywhere to find a solution for my problem, but I found nothing.
Today I accidentally got into the Samsung Recovery Utils of my galaxy 3. I have done nothing to the phone, all original, nothing flashed or rooted. But now I can't get out of this mode, if I restart the phone it automatically goes back into it.
Does anyone know how to get out of there?
Thank you a lot for helping me!
And I hope that this is the right forum to ask this question, as I said, I have never posted in a forum before.
Usually you should be able to reboot from recovery mode. Scroll to reboot Phone with the Volume Keys and klick with the Home Key... Your phone should restart.
Otherwise remove the battery, wait a few moments, plug the battery back in and try it again.
Good Luck
Thank you, I tried both several times, but I always end up in the recovery mode... I have no idea how i can get out of there! Do you maybe know something else I could do?
do the battery thing mentioned above. turn on your phone with vol up+ vol down+home +power (hold them for a while) and then try rebooting from the menu
here's the solution
Pilzwachtel said:
Hey everyone!
I have never posted anything on a forum before, so please tell me if I do anything wrong. I have searched everywhere to find a solution for my problem, but I found nothing.
Today I accidentally got into the Samsung Recovery Utils of my galaxy 3. I have done nothing to the phone, all original, nothing flashed or rooted. But now I can't get out of this mode, if I restart the phone it automatically goes back into it.
Does anyone know how to get out of there?
Thank you a lot for helping me!
Click to expand...
Click to collapse
Hey.. If ur on a Android 2.1 firmware and stuck on recovery every time...
just use the volume keys and chose the option "reboot" ... by the way.. its on default there.
after that just press the central key or called the "home key" two times consecutively..
ur good to go
I tried this several times, but I always end up in the Recovery Menu. When I pull out the battery, restart the phone and hold all those buttons including the power button my phone shows the Samsung Galaxy Logo and then reboots again, and then shows the Logo and reboots again. Only without holding the power button, and only the other ones I get into the Recovery Menu again. I really hope there is a way to get out of this mode! Thank you for all your help so far!
Hey I just saw the post in front of my other one
So yes I'm on Android 2.1 if that helps. And I tried this method several times, but when my phone restarts I always end up in the recovery mode by pressing nothing.
But thank you
try wipeing data and cache
I tried that out, but still rebooted into recovery mode all the time.
Because I couldn't find anything that solved my problem I just decided to flash my phone to a newer original firmware via odin. I just finished flashing and everything works fine as it did before, till now tho. I used the tutorial that is on this forum for flashing my I5800 and it worked perfectly fine, thank you for everyone's help anyway!
Now I hope that they will soon bring back froyo on kies, because it was deleted from the servers again today in Germany so I can't update. Hope that will happen soon!
I would recommend to forget about KIES... I am sorry but this software is a piece of crap!
Keep using the Odin Flasher. If you have some spare time install gsams nice lagfix and be happy about a very fast Froyo I5800
Edit:
Another funny thing about Kies: You can download the current version by using a US Proxy Server, which is also free of these annoying error messages at startup. But still there are much better alternatives, and the newest version (Kies 5 I think) is also incompatible to the I5800 Phone :-/
Yes, I really hate kies, that software is nothing good!
I think I will follow your advise to continue using odin flasher. Which froyo version is the best to install? I still have 2.1 on my phone. and then how do you install that lagfix? Sorry for all those questions, but I'm new to all this.
Sent from my GT-I5800 using XDA App
you are new to this? ok, then go to the development section and see the READ FIRST thread
I have already read through those threads, I just meant that I just started some days ago, I'm not a pro, I'm only someone who just started haha
So today I flashed to xxjpf froyo and I'm having no problems so far. everything is fine so my problem is solved and in addition I have froyo now
Sent from my GT-I5800 using XDA App
Hi there,
I have some problems with my blade. I tried to install one app, it was instaling for several minutes, and I turned it of...When I tried to turn on, it couldnt boot. When I press home+volume up+power on it boot me into recovery and I dont know what to do next. Which button I need to use to confirm any action in recovery? My blade is UNROOTED, with original 2.2. I saw many threads here about that, I read it all, but still dont know what to do...
Anyone please ?
Try Hard Reset Option
This might help:
http://www.hardreset.eu/zte_blade_hard_reset_soft_reset_en.html
Hello Forum,
first of all, I used Google to find out what to do with my problem, but found nothing. (Just for those, wo wanna tell me how to use the serch )
So, I am german... my english is not perfect but hopfully you will understand it.
My Phone:
LG D802, rooted, with latest TWRP installed
My Problem:
I can flash any CM based ROM but if I try to flash CloudyG2 , MIUI or Flyme it just get suck at booting.
I press the powerbutton, the screen turns on, the LG logo appears and a second later it just turns black.
After a while I figured out, that the phone boots into a "Fastboot mode without lines showing on the display" - And if got a QHSUSB__BULK which i cant fix with SRK tool because it´s simply not detecting my phone.
The funny thing is, I can still enter recovery to flash back my CM 12 - and its fully working - but I dont want that.
Flashing .kdz with LG Flash Tool 2014 isnt working too.
It only shows up the "normal" error message and if I would like to retry. And yes I waited for like 20 minutes at that state and still nothing happens.
Hopefully someone out there who can help me
Greets,
Ims
I think you have the wrong bootloader...
Flash the right one (or the patch from the d802 thread), reboot recovery (not system) and try again.
https://www.androidfilehost.com/?fid=24052804347760919
Dude... Just... thank you :good:
I´ve tried all kind of things for hours and nothing worked.
And now, first answer to my Thread - problem solved... im out
And again a big thanks to you
IMS4NE said:
Dude... Just... thank you :good:
I´ve tried all kind of things for hours and nothing worked.
And now, first answer to my Thread - problem solved... im out
And again a big thanks to you
Click to expand...
Click to collapse
You're welcome
Hi there, I was attempting to move from a nougat Lineage OS rom to an unofficial Oreo one and as such needed to update to an Oreo Universal Bootstack as far as I understood it. I, therefore, flashed this: A2017X_BootStack_B32_N.zip (sorry, I'm too new a user to be able to post links) file using TWRP however on reboot it appears I have completely bricked my phone. At this point I am unable to get anything to display on my phone at all, any combination of button holds yields the same result, there is a slight vibration then the led turns red for a second then switches off. Connecting it to a PC it is recognised as ZTE Handset Interface (DFU). From what I've read it appears at least with the Chinese version (that I have) that you should be able to manually get it into EDL mode though pressing the power and both volume buttons but I have had no luck with that so far. Any help is much appreciated
lukeshields said:
Hi there, I was attempting to move from a nougat Lineage OS rom to an unofficial Oreo one and as such needed to update to an Oreo Universal Bootstack as far as I understood it. I, therefore, flashed this: A2017X_BootStack_B32_N.zip (sorry, I'm too new a user to be able to post links) file using TWRP however on reboot it appears I have completely bricked my phone. At this point I am unable to get anything to display on my phone at all, any combination of button holds yields the same result, there is a slight vibration then the led turns red for a second then switches off. Connecting it to a PC it is recognised as ZTE Handset Interface (DFU). From what I've read it appears at least with the Chinese version (that I have) that you should be able to manually get it into EDL mode though pressing the power and both volume buttons but I have had no luck with that so far. Any help is much appreciated
Click to expand...
Click to collapse
Hi lukeshields. It's not much help to you but I have exactly the same problem right now. If I do find a solution I will let you know.
I have heard however that with a deepflash cable, bought or one you can make at home sometimes you can boot into EDL. I have tried and it didn't work, maybe it will be different in your case.
Cheers.
Victor13f said:
Hi lukeshields. It's not much help to you but I have exactly the same problem right now. If I do find a solution I will let you know.
I have heard however that with a deepflash cable, bought or one you can make at home sometimes you can boot into EDL. I have tried and it didn't work, maybe it will be different in your case.
Cheers.
Click to expand...
Click to collapse
Hey man, I actually literally just managed to get my phone working again. It was a pretty hands-on job but I followed the guide: https://forum.xda-developers.com/axon-7/how-to/guide-dfu-unbrick-guide-disassembly-t3731152 which got my phone back on the official stock and ROM. It involves taking your phone apart but it's not too tricky if you take your time and are extra careful. Good luck and thanks anyway!
Hi from Lithuania!
please help someone
short story - i tried to flash recovery image via asus flash tool and when it stuck. now i havent any droid at begining no recovery option, and when it powers up touch screen dont work.
long story- 1. my friend ask to remove password from zenpad,his children add it. password with program app lock or something.
2. i tried to do hard reset but i didnt find the combination (it was very strange) only three options comes with vol down and pow. nothing comes with vol up.
3. i decide to flash it to stock firmware, download stock img drivers and etc.
4. i used asus flash tool, and it stucks at the moment, and now i cannot flash it anymore. the symptoms are-
nothing comes when power up(only light)
when its power on touch screen not working,but still see the locked app and all concent.also cannot turn it off (need mouse to turn it off)
how i can get out of this situation? how to fix it ? please help guys, i dont have any minds now, searched info for 1 week, but maybe bad.
Greetings from Lithuania
the biggest question how to get the device to bootloader? i cannot to it by buttons