My BLADE cant BOOT, please help! TY - Blade General

Hi there,
I have some problems with my blade. I tried to install one app, it was instaling for several minutes, and I turned it of...When I tried to turn on, it couldnt boot. When I press home+volume up+power on it boot me into recovery and I dont know what to do next. Which button I need to use to confirm any action in recovery? My blade is UNROOTED, with original 2.2. I saw many threads here about that, I read it all, but still dont know what to do...

Anyone please ?

Try Hard Reset Option
This might help:
http://www.hardreset.eu/zte_blade_hard_reset_soft_reset_en.html

Related

[Q] Stuck in Samsung Recovery Utils

Hey everyone!
I have never posted anything on a forum before, so please tell me if I do anything wrong. I have searched everywhere to find a solution for my problem, but I found nothing.
Today I accidentally got into the Samsung Recovery Utils of my galaxy 3. I have done nothing to the phone, all original, nothing flashed or rooted. But now I can't get out of this mode, if I restart the phone it automatically goes back into it.
Does anyone know how to get out of there?
Thank you a lot for helping me!
And I hope that this is the right forum to ask this question, as I said, I have never posted in a forum before.
Usually you should be able to reboot from recovery mode. Scroll to reboot Phone with the Volume Keys and klick with the Home Key... Your phone should restart.
Otherwise remove the battery, wait a few moments, plug the battery back in and try it again.
Good Luck
Thank you, I tried both several times, but I always end up in the recovery mode... I have no idea how i can get out of there! Do you maybe know something else I could do?
do the battery thing mentioned above. turn on your phone with vol up+ vol down+home +power (hold them for a while) and then try rebooting from the menu
here's the solution
Pilzwachtel said:
Hey everyone!
I have never posted anything on a forum before, so please tell me if I do anything wrong. I have searched everywhere to find a solution for my problem, but I found nothing.
Today I accidentally got into the Samsung Recovery Utils of my galaxy 3. I have done nothing to the phone, all original, nothing flashed or rooted. But now I can't get out of this mode, if I restart the phone it automatically goes back into it.
Does anyone know how to get out of there?
Thank you a lot for helping me!
Click to expand...
Click to collapse
Hey.. If ur on a Android 2.1 firmware and stuck on recovery every time...
just use the volume keys and chose the option "reboot" ... by the way.. its on default there.
after that just press the central key or called the "home key" two times consecutively..
ur good to go
I tried this several times, but I always end up in the Recovery Menu. When I pull out the battery, restart the phone and hold all those buttons including the power button my phone shows the Samsung Galaxy Logo and then reboots again, and then shows the Logo and reboots again. Only without holding the power button, and only the other ones I get into the Recovery Menu again. I really hope there is a way to get out of this mode! Thank you for all your help so far!
Hey I just saw the post in front of my other one
So yes I'm on Android 2.1 if that helps. And I tried this method several times, but when my phone restarts I always end up in the recovery mode by pressing nothing.
But thank you
try wipeing data and cache
I tried that out, but still rebooted into recovery mode all the time.
Because I couldn't find anything that solved my problem I just decided to flash my phone to a newer original firmware via odin. I just finished flashing and everything works fine as it did before, till now tho. I used the tutorial that is on this forum for flashing my I5800 and it worked perfectly fine, thank you for everyone's help anyway!
Now I hope that they will soon bring back froyo on kies, because it was deleted from the servers again today in Germany so I can't update. Hope that will happen soon!
I would recommend to forget about KIES... I am sorry but this software is a piece of crap!
Keep using the Odin Flasher. If you have some spare time install gsams nice lagfix and be happy about a very fast Froyo I5800
Edit:
Another funny thing about Kies: You can download the current version by using a US Proxy Server, which is also free of these annoying error messages at startup. But still there are much better alternatives, and the newest version (Kies 5 I think) is also incompatible to the I5800 Phone :-/
Yes, I really hate kies, that software is nothing good!
I think I will follow your advise to continue using odin flasher. Which froyo version is the best to install? I still have 2.1 on my phone. and then how do you install that lagfix? Sorry for all those questions, but I'm new to all this.
Sent from my GT-I5800 using XDA App
you are new to this? ok, then go to the development section and see the READ FIRST thread
I have already read through those threads, I just meant that I just started some days ago, I'm not a pro, I'm only someone who just started haha
So today I flashed to xxjpf froyo and I'm having no problems so far. everything is fine so my problem is solved and in addition I have froyo now
Sent from my GT-I5800 using XDA App

[Q] HTC Wildfire bricked? need help /will give reward

hello i just wanted to see if i still could get help with my useless device
Ok so yesterday ive rooted the phone and today i tried to install cyanogen mod 7 rom
i used rom utility which i ve downlaoded from android marketplace
now sometimes my phone boots and gets to the logo loop
ive heard that clearing cache and settings would work but i cant access these menus as my hboot is not reacting to my key presses , i tried to reflash the phone but nothing came with success.
I used android sdk and RUU but nothing with success .
maybe anyone would teamview me or give me step by step tutorial how to get this phone alive again would be appreciated
You will be rewarded
You rooted the Phone with a App from the Market?
You need if your HBoot is lower then 1.* the unrEVOked Tool.
If its 1.* there is no way to flash it.
Okay, maybe it worked with yout root app from the market, dunno, but i dont think so.
So you cant access while pressing volume down (keep holding) and switching on the phone the bootmanager? oO thats no good.
The Logo will stay up to "15minutes (<-?)" after flashing a new Rom. In this time its possible, that you Phone restarts automaticly. its normal. Switch it on an wait up to an half hour. If it keep staying in the boot sequence while showing the logo you got a problem .
I think there isnt a more unsave way than a "Flash by teamviewer". You have also pay attention to the phone while flashing. on TV you cant keep an eye on it.
But how can you reflash your phone without getting access to the bootmanager/ HBoot? I think you habe to access the clockwork to flash cm7 *thinking*.
If u nowhow to use adb try n get a adb logcat if possible
Sent from my HTC Wildfire using XDA App
Hi borris and daddyspud thanks for your reply ,i cant move around in hboot ,my hboot version i 0.80.0003
Ive rooted it using unrevoked with clockwork mod on it.
now even when i get it to boot it just loops in cyanogen animation,should i leave it for 15 minutes to do its thing?
also im new to this so i dont know anything about sdk and adb,all i did is saw the tutorials using it ,so i thought i would use it just to give it a go
HBoot 0.8 is rootable, so its okay.
If there is still an animation while you see the CM Logo everything is fine.
If it freeze for some minutes is there a problem. The Animation shows you "i am working / installing".
Yes, let him do his thing for some Minutes.
I think everting should be okay and after some minutes it will work like normal.
It reboots sometimes it self, but this is also okay.
I dont know... does the new CM7 also install a new HBoot? So its possible why you cant move around in it.
Do you wait about 10 seconds before you try to move around in it? Because in the first seconds it looks like it freezed an then it start a test or something. this takes about 10seconds then you can use it.
Its not bricked if its turning on.
Can you get into recovery? If you can try flashing the 4.1 kernel.
If that doesnt help, go into recovery and do a full wipe. Clear cache and dalvik, and under partitions menu format everything except SD card. Then flash CM7, then the 4.1 kernel
Remember first boot will take 10-15 minutes. Be patient. If youve done everything right you shouldnt have any problems
Hi and thanks for cooperation ,i left my phone on cyanogen animation for an hour and nothing is happening just animation loop constantly.
I've just tried hboot and it searches for the PC 49 DIAG and says not found after that it freezes and i cant use any menu navigation buttons . in hbot and fastboot.
I dont even know what to do next
Much help appreciated guys
oO
thats weird.
the PC49DIAG is a part of the rom it self. So i think you have to try to re-flash it. Did you try it with or without a goldcard?
before you flash your phone whipe ALL datas on it!!!
If i start in bootloader mode i get also all the "missing" errors but i can still use the vol up/down buttons to navigate around.
That should help.
I think you did something wrong while flashing.
the root failed?
you got an error while flashing?
goldcard?
Try to flash a RUU from shipped roms. DONT flash a Froyo rom, you will get the HBoot 1.* if you do this.
Recoverymode doesnt work in the hboot?
If you try recoverymode you will get a blackscreen with an triangle.
most say "press the power button" to enter the recovery mode. if this doesnt work press the "volum up button (hold it) then the power button" this should enter recovery mode.
**EDIT**
http://shipped-roms.com/index.php?category=android&model=Buzz use a www-rom its without a branding. and use a RUU rom.. and pls dont use a froyo rom. after flashing this your root is gone i think but your phone will be alive again.
dont try the cm7 this time. use a stock rom.
is it alive again?
i talked today to someone who hat exactly the same problem like you.
it was simple to fix the problem... he (you also?) didnt
whipe the phone before he flashed the cm7. thats why it wont stop looping
in the cm7 animation.
after whiping and reflashing everything was fine.
... did you whipe it b4 flashing?

help with iris 504q+

I installed a new boot animation using rom toolbox pro on my lava iris 504q+
now i m stuck on boot logo
but still it rings on recieving calls and message...
there is no cwm or custom recovery or custom rom that could help me
pls help...i m a newbie
please provide the stock rom for iris 504q+
Mate,
Don't panic and do something which bricks your phone. Try to hard reset your phone after removing your external memory card, since during factory reset, all data will be erased, including internal memory and the phone will become brand new as it was in the box, when you bought it... try different key combinations for this, it's only a try..
Switch of your phone, and press volume up key and power key for 5 seconds, you will get an android screen with no command display.. keep pressing the power key, it enters recovery, from recovery, do wipe data\factory reset and then reboot your phone....
Hope this helps...
Needs Developer Help please...
Any Developer please help us to ROOT Lava Iris 504Q+ after upgrading to KitKat 4.4.2
Please.....
Any One from Entire XDA help us....
After updating to 4.4.2...... we are unable to get root access again..... Please any developer help us to get out of this problem..... please........
Kingoroot
Friends,
when i purchased 504q+, it was already updated to KitKat, but it was not rooted.
I tried many apps but it was not getting rooted.
But i did it through Kingoroot ,
and when checked by Root Checker Pro, it says that mobile is successfully rooted. :good:
i too briked but cant enter recovery...what to do?
cooljay5 said:
Mate,
Don't panic and do something which bricks your phone. Try to hard reset your phone after removing your external memory card, since during factory reset, all data will be erased, including internal memory and the phone will become brand new as it was in the box, when you bought it... try different key combinations for this, it's only a try..
Switch of your phone, and press volume up key and power key for 5 seconds, you will get an android screen with no command display.. keep pressing the power key, it enters recovery, from recovery, do wipe data\factory reset and then reboot your phone....
Hope this helps...
Click to expand...
Click to collapse
i too briked but cant enter recovery...what to do?
I mistakenly updated wrong boot file...now I cant revert it back
any other way to reset ?
deepak+z said:
i too briked but cant enter recovery...what to do?
I mistakenly updated wrong boot file...now I cant revert it back
any other way to reset ?
Click to expand...
Click to collapse
Only way is to flash the original ROM file of 4.1.2 and then upgrade it to 4.4.2, by downloading the update zip files from lava's website.
Hello have u solved your problem yet?

Fun day! Possible brick. Phone stuck in download mode on boot

I have a GALAXY S5 ive never used custom roms or installed them, for phones atleast. I tried to install one today, and for some reason my 3ds is like BRICKED before i even got to install it. When you turn it on it says "you meed to download this " press y, or b to shut down. After pressing y I ended up at a screen that does nothing. picture of green android, and non moving text.
anyone know amy quick fixes, and suggetions forr the cfw?
fatedblizzard said:
I have a GALAXY S5 ive never used custom roms or installed them, for phones atleast. I tried to install one today, and for some reason my 3ds is like BRICKED before i even got to install it. When you turn it on it says "you meed to download this " press y, or b to shut down. After pressing y I ended up at a screen that does nothing. picture of green android, and non moving text.
anyone know amy quick fixes, and suggetions forr the cfw?
Click to expand...
Click to collapse
Same exact sht been happening to me today, id suggest using odin, as well as rooting it, I also tried to flash bootloader with a recovery thing, it worked but didnt fix the issue. The fked screen is a recovery screen not a bootloader i guess. Im still working on fixing mine. Going to see if flashing a rom will get rid of it. good luck
Try flashing stock ROM in ODIN, followed by clearing cache in recovery mode (volume up+home+power key).
If that doesn't help, a factory reset/wipe data may be necessary which can also be done in recovery mode.
If you don't understand what I'm going on about, I'd suggest to read up before continuing

flashing went wrong, please help guys to guide me whats wrong here zenpad 10 300cl

Hi from Lithuania!
please help someone
short story - i tried to flash recovery image via asus flash tool and when it stuck. now i havent any droid at begining no recovery option, and when it powers up touch screen dont work.
long story- 1. my friend ask to remove password from zenpad,his children add it. password with program app lock or something.
2. i tried to do hard reset but i didnt find the combination (it was very strange) only three options comes with vol down and pow. nothing comes with vol up.
3. i decide to flash it to stock firmware, download stock img drivers and etc.
4. i used asus flash tool, and it stucks at the moment, and now i cannot flash it anymore. the symptoms are-
nothing comes when power up(only light)
when its power on touch screen not working,but still see the locked app and all concent.also cannot turn it off (need mouse to turn it off)
how i can get out of this situation? how to fix it ? please help guys, i dont have any minds now, searched info for 1 week, but maybe bad.
Greetings from Lithuania
the biggest question how to get the device to bootloader? i cannot to it by buttons

Categories

Resources