Edge panel crashing after updating to Android 6.0.1 - Galaxy S6 Edge+ Q&A, Help & Troubleshooting

Hello to all,
I have an issue with my S6 edge after updating it to Android 6.0.1.
All is working fine except an edge (side) panel. When I slide it to people edge it's ok, but when sliding to app edge I get notification that "application edge screen was closed". Restart opens it again but still is crashing the same way.
Already contacted Samsung - had to factory reset. That didn't help. Told me to contact service for further repairs.
Already wiped device in recovery mode - didn't help.
Already changed firmware by Odin to BTU (I'm polish) - didn't help
Already changed firmaware to XEO again - didn't help
Already changed firmware using 4 files (pit too) XEO - didn't help.
Can anyone help to resolve this issue?

What ROM are you currently on? Are you rooted? Do you use Titanium Backup or similar?
I ask because I once had the exact same problem. I'd accidentally frozen "Apps Edge"
in Titanium?
Otherwise, see if there's an Edge update in Samsung Apps. Or try pushing another Apps Edge apk into your current setup?

I'm having the same issue - it only seems to be the apps edge panel that crashes it. If I remove all the apps from the panel then re-add them it's ok for a while, then later it crashes again. It was fine & I was using it all the time before the last software update!
Phone details:
Samsung S6 Edge SM-G925F
Android 6.0.1 Build MMB29K.G925FXXU3DPDP (not rooted/customised)

re: edge panel issue
davesing33 said:
I'm having the same issue - it only seems to be the apps edge panel that crashes it. If I remove all the apps from the panel then re-add them it's ok for a while, then later it crashes again. It was fine & I was using it all the time before the last software update!
Click to expand...
Click to collapse
How difficult would it be to add a couple lines in your post letting everyone know your phone's exact model,
which custom rom you are currently using and whether or not you have xposed framework installed?
And any other specific details.
Good luck,
Have a great day!

Misterjunky said:
How difficult would it be to add a couple lines in your post letting everyone know your phone's exact model,
which custom rom you are currently using and whether or not you have xposed framework installed?
And any other specific details.
Good luck,
Have a great day!
Click to expand...
Click to collapse
I don't have any xposed framework installed.
Phone isn't rooted as I'm still under warranty which I don't want to lose. Never used Titanium backup or any other app. The only backup was made by SmartSwitch.
The App endge is alrady up to date.
Current ROM is G925FXXU3DPDP
Ver. No. MMB29K.G925FXXU3DPDP
Android 6.0.1

Related

Galaxy S6 edge 6.0.1 update

hello guys i have recived an update dor galaxy s6 edge running on android 6 beta lokss like its a new bulild number with 6.0.1 android
I've just received the same update .. have you installed any visuals added or any improvement you have noticed ?
edge screen has a new functions very nice
scorpion112 said:
hello guys i have recived an update dor galaxy s6 edge running on android 6 beta lokss like its a new bulild number with 6.0.1 android
Click to expand...
Click to collapse
Hey Bro.
I running android 6.0 beta but no new update for me ...
How update tu android 6.01
Just came to my phone as well. Downloading it now.
It would be great if someone could upload the rom if a dev could somehow use it to distribute it to the rest or maybe a system dump
It works, with a small starting issue.
Edge features are great. News (Yahoo only, can't seem to be able to change it) people, tasks, frequently used apps, stocks, tools (compass, ruler, flashlight), Twitter feed, sports scores (again Yahoo) Internet bookmarks etc.
Most everything can be customized and changed to suit your needs. One useful feature is locations and what you want the phone to do when you reach that location. I set mine to turn off wifi and BT and put it in vibrate when I reach work. I know, these things have been around for a long time but it's nice to have them in the Edge screen.
After the update was applied I was stuck on 2G for a while. Turning mobile networks off/on, swapping APNs and turning on/off roaming didn't help. I then opted to go for Automatic 3G/2G in network selection, which got me on 3G, then I switched back to Automatic LTE/3G/2G which got me back on LTE. I did not reboot, which may have fixed the issue. Just a headsup... I'm on ATT.
Smart Manager is now in Settings.
Not sure of other features... will dig some more, and of course test the battery life.
Had the 2G issue but rebooted it updated all fine.
Loving the edge features glad to see Samsung wake up and really introduce a killer feature. Now they need to keep up support, add even more cards and advertise the feature. Location feature is cool as is the compass although needs a calibration at each use.
Agenda card is awesome everything for the day and one click brings up the details.
Contact tab finally a direct call option plus lots of other options.
Only about 350MB download. OTA, its an awesome update 6.0.1 and January security patch.
is the lag still present any where on the UIs animations ?
Got the update zip for my 925F from the "/data/fota" folder.
Here is the link to the update: MEGA
Also I've managed to get the new sboot from the zip and pack it with the Tar-tool to the tar.md5 file in case it's needed for rooting.
Here is the link to the new bootloader: MEGA
Edit: changed the bootloader tar.md5, somehow md5 did not match on previous one. Sorry about that.
Link to the new one: MEGA
Battery notably better with heavy use, playing with app most the day.
I don't notice the lag but then I turn animations right down
Nezorflame said:
Got the update zip for my 925F from the "/data/fota" folder.
Here is the link to the update: MEGA
Also I've managed to get the new sboot from the zip and pack it with the Tar-tool to the tar.md5 file in case it's needed for rooting.
Here is the link to the new bootloader: MEGA
Click to expand...
Click to collapse
How would you flash that with ODIN?
Any help would be appreciated.
Vadoseflame said:
How would you flash that with ODIN?
Any help would be appreciated.
Click to expand...
Click to collapse
If you mean the new bootloader, flash it with BL button.
As for the update.zip, it's not for the Odin but for the stock recovery.
Nezorflame said:
If you mean the new bootloader, flash it with BL button.
As for the update.zip, it's not for the Odin but for the stock recovery.
Click to expand...
Click to collapse
Thanks,
so how do I exactly install 6.0.1 on my Samsung device?
new emojis?
too many new emojis. hell you can have an entire conversation with emojis in SMS
Or even a chess game.
Updated mine this morning to latest 6.0.1 update so far so good .. no issues at all ..battery seems to last a little longer ..
Vadoseflame said:
Thanks,
so how do I exactly install 6.0.1 on my Samsung device?
Click to expand...
Click to collapse
i guess you may want to place the .zip file in data/fota folder and then try restarting phone, restarting into stock recovery or restarting to upload mode for SW updates.
good luck !

Note 4 N9100 Marshmallow feedback ? VoLte Status ?

Hi ,
Samsung released Marshmallow after a long wait for Open China Note 4 Duos , Hong Kong version is still pending for marshmallow update .
Q1. Did samsung introduced volte for note4 duos with marshmallow ?
Q2. Which custom recovery are you guys using ? Is lollipop compatible twrp working with marshmallow ?
any top chinese mobile forums that you guys can recommend . Google is getting polluted these days with many sites using scripts to copy content from xda to a blogspot site
I went ahead and did a bold move of flashing my HK Note 4 Dual N9100 with the Open China ROM 6.0.1 released by Samsung.
Steps did.
1) Used the cmw recovery compatible with N910w for N9100. Didnt find one for N9100 directly. Worked.
2) Flashed 6.0.1 on top of 5.1.1. After booting up, lot of apps crashed. understandable as it doesnot have google play. Hence factory reset.
3) Rooted the ROM 6.0.1 using Odin setup compatible for N910w. Didnt find one for N9100 directly. Worked.
4) Installed gapps pico. After setting up permissions and few hickups, it too worked.
5) Reinstalled rest of the apps from playstore, everything works.
Outcome - super snappy. excellent battery life than 5.1.1 ROM. Love it.
One problem - 10 mins after you turn off the screen, notifications wont show up on the phone. If your screen is on, all notifications shows up just fine.
Did some research and understood that its the dooze feature that is putting the phone to deep sleep. Its a very talked about issue in Samsung devices specially S5, S6 after it got updated to Marshmallow. Lot of suggestions are written
a) about adding required apps and google play store to "Do not Optimize" section. Tried all but all in vain.
b) Turn off Wifi and see, but no luck.
Its very annoying to not see the notifications show up but not a deal breaker as turning on the screen will bring them. But still.......Anybody have any suggestions?
Thanks for updating here , any luck with VoLte? Could you post the links of the exact custom recovery you used . does it support exfat and ext3/4 partition ? I plan on using a partitioned microsd with marshmallow with first half for system memory and 2nd half as removable storage (tib backup , media)
The last update for HK version was on 1st September 2016 which means they are working on the ROM . I am just guessing that CN version might not have VoLTe . There is no ROM difference between Open china and HK except gapps
http://www.sammobile.com/firmwares/database/SM-N9100/
my carrier does not support VoLTE. So unsure if the 6.0.1 rom supports it. VoLTE is not shown any where in the Network settings though. !
I lost the link for the recovery as i frantically downloaded a few and tried randomly for which one works. . I am trying to attach the recovery file but giving an error as i am a new member.
Any suggestions on the notificatons not showing up after screen off issue?
Is it app specific or all apps?
All apps !
nmathew said:
All apps !
Click to expand...
Click to collapse
Did your problem solve?

S7 EDGE with FRP lock - black screen - won't boot

A week ago I bought a used s7 edge. The original owner had done a factory reset. My first thing was to flash the latest local stock rom, bootloader, and modem. Then I installed TWRP and then rooted. All great. After a few days, I got tempted by the new Nougat betas.
OK, so now I've got a huge mess. I updated to the Minotaur 7.0 beta (nice rom) and got it nicely set up. I'm quite sure that I enabled OEM Updates in Developer Options. I was trying a manual setup of the APN and it wasn't working. So I thought a reboot might solve it. When I rebooted, I got a black screen with a little red message at the top - Custom binary blocked by FRP lock.
So I have spent the afternoon on the Internet only to learn that Google and Samsung created that lock so that stolen phones cannot be easily put into service. If OEM updates are checked, that disables the lock. I don't know what happened but I have a phone with a black screen that won't boot. It will go into download mode so I will try to flash a stock rom.
OK, that worked. I lost 2 days set up but the rom is booting.
Samsung Galaxy S5
Exodus CM12 5.1.1
Boeffla kernel
Apex Launcher
Hi.
Download the official firmware for your S7 and flash it with Odin. That should solve the problem.
ByronXg said:
Hi.
Download the official firmware for your S7 and flash it with Odin. That should solve the problem.
Click to expand...
Click to collapse
Yes it did! I was very worried that the stock rom was MM and so I was going backward. But it worked! And now I am all set up again. Just wish I knew what triggered that so I could avoid it in the future....
Sent from my SM-G935F using XDA-Developers mobile app
Did you tilt the option about OEM unlock in develop settings? Also try to flash without setting any PIN or fingerprint in the official rom
How do I do this process with a Claro brand phone? I do not know what firmware to select, the list has every country but Unites States.
rachel10105 said:
How do I do this process with a Claro brand phone? I do not know what firmware to select, the list has every country but Unites States.
Click to expand...
Click to collapse
You can use the European firmware on it.

Contants

Guys i want to install contants application on s7 edge but tell me i can not already exist a package and it goes in conflict ... how can i fix it? Thanks
This is a common issue with the newest S7 firmware. Not just with the Contacts, but Camera, Incall, Myfiles, AlwaysOnDisplay etc...
Maybe I'll downgrade from QD7 to QB3..
Ok thanks then x the time can not install? Thank you

[Oreo] S7 Active Android Oreo Looks More Like S8

The new Android Oreo OTA firmware looks more like the galaxy S8 theme, without any modding needed, apart from installing the zip file!
the zip file is found on the below website
[Must be on baseband ending in BRB5, check out my other post for instructions how to get to that version...]
https://cloud.mail.ru/public/BGy7/gKs4xzhRE/OTA/Oreo/SS-G891AUCU2BRB5-to-U2CRC7-UP.zip
Attatched below are pictures of the new Oreo update, which I installed on my S7 Active, and by the way, the update has not crashed at all. [It did crash once, but that was due to me using the phone in direct sunlight, which may have caused it to overheat, but thats probably a good thing, that it didn't overheat till death]
i have gone into the home screen settings, and disabled the apps button in the bottom right, so i can swipe to view my apps. by default , there are no s8 wallpapers, but i will include the wallpaper i used below. enjoy!
heres the wallpapers. think i ran out of attachments up there:
i understand the photo says galaxy s7 under phone name. this is not officially released yet, so for some odd reason, the default name is galaxy s7 rather than galaxy s7 active.
Battery Life & Stability?
jacoblong09 said:
The new Android Oreo OTA firmware looks more like the galaxy S8 theme, without any modding needed, apart from installing the zip file!
the zip file is found on the below website
[Must be on baseband ending in BRB5, check out my other post for instructions how to get to that version...]
https://cloud.mail.ru/public/BGy7/gKs4xzhRE/OTA/Oreo/SS-G891AUCU2BRB5-to-U2CRC7-UP.zip
Attatched below are pictures of the new Oreo update, which I installed on my S7 Active, and by the way, the update has not crashed at all. [It did crash once, but that was due to me using the phone in direct sunlight, which may have caused it to overheat, but thats probably a good thing, that it didn't overheat till death]
i have gone into the home screen settings, and disabled the apps button in the bottom right, so i can swipe to view my apps. by default , there are no s8 wallpapers, but i will include the wallpaper i used below. enjoy!
Click to expand...
Click to collapse
As mentioned above, how's the battery life and stability so far? I haven't got my device rooted or anything, how would I go about updating to OREO, should Iflash the file through ODIN? Do I need to be on a specific version of Nougat before upgrading?
Thanks
u07av8 said:
As mentioned above, how's the battery life and stability so far? I haven't got my device rooted or anything, how would I go about updating to OREO, should Iflash the file through ODIN? Do I need to be on a specific version of Nougat before upgrading?
Thanks
Click to expand...
Click to collapse
Before upgrading you need the build number G891AUCU2BRB5, then you have to flash the Oreo rom using stock recovery and adb sideload.
How well does it run on your phone?
jacoblong09 said:
The new Android Oreo OTA firmware looks more like the galaxy S8 theme, without any modding needed, apart from installing the zip file!
the zip file is found on the below website
[Must be on baseband ending in BRB5, check out my other post for instructions how to get to that version...]
https://cloud.mail.ru/public/BGy7/gKs4xzhRE/OTA/Oreo/SS-G891AUCU2BRB5-to-U2CRC7-UP.zip
Attatched below are pictures of the new Oreo update, which I installed on my S7 Active, and by the way, the update has not crashed at all. [It did crash once, but that was due to me using the phone in direct sunlight, which may have caused it to overheat, but thats probably a good thing, that it didn't overheat till death]
i have gone into the home screen settings, and disabled the apps button in the bottom right, so i can swipe to view my apps. by default , there are no s8 wallpapers, but i will include the wallpaper i used below. enjoy!
Click to expand...
Click to collapse
I'd like to know about performance issues with Oreo on the S7 active. There is an article that says there's a noticeable slowdown and some glitches with the camera. Are these isolated glitches or does anyone upgrading to Oreo find the same thing?
hey... with the "swipe to unlock" on oreo does it still appear after you set a timer too keep your phone unlocked during activity?
one og my gripes with Nogat is the swipe to unlock never goes away....

Categories

Resources