Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
as far as i can see,you have flashed system.img and he work,now try again to flash via adb only system.img,wen is done,run command fastboot reboot an remove usb cable from phone and press and hold on volume button up to enter in recovery mod,once in recovery wipe data factory reset and wipe cache,it wiil delete all your memory phone,but it my work,so good luck
Hello Cristi,
Thank you for reply, i will try to flash only with system.img and then reboot.
Then I'll come back with the result.
There any other method to flash full memory ? (e.g. with SP_Flash_Tool ) Delete all data and then complete installation with full fw?
Bad News,
After I flash adb only with system.img and then reboot, push volume + & power, only light red light flashing slower.
Is possible that the bottom Volume UP, may not work
Do you have a NAND backup through TWRP?
What FW are you trying to flash?
What happened so that it shows this?
Try to flash with other version ... try to flash with b170
@ - Hello oziboy;
I don`t have a backup and i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common));
I don`t know the history .... the device has got to me so broken
@ - Hello VladHD;
i will try , thk for info.
Hi....
try first to flash with fastboot firmware b049 or b052,
when finished flashing then factory reset and wipe....
then local update 171 or 170....
ingerul_danutz said:
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
Click to expand...
Click to collapse
you can try here http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
I did get another motherboard, and now the phone is total functional.
K
Sent from my ALE-L21 using XDA-Developers mobile app
ingerul_danutz said:
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
Click to expand...
Click to collapse
My p8lite phone also soft bricked can you tell how did you unlocked your boot loader?
I use this method:
- Open Huawei Product ID Generator, then complete:
Product Model: U8815,
Product IMEI: imei from sim1;
and now you have Product ID generated;
now, Connect your phone via data cable to PC;
Switch it off and then by pressing volume down and power together make it in fastboot mode (in this mode you will see "Phone locked" in green color at bottom of screen)
- enter https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail login with ID facebook or create an account; and then complete with:
Product Model: U8815 - like Huawei Product ID Generator;
Product Serial Number: 16 characters ; will be found on the box of device or type command "fastboot devices", when you connect the phone in fastboot mode (volume down + power botton);
Product IMEI: imei from sim1 ;
Product ID: the code generated from Huawei Product ID Generator program;
Verification code: characters from picture;
and then submit; if everything is OK, the code will be generated;
type command: "fastboot oem unlock **************** "
where ************** is code generated on emui.huawei.com;
Good luck
ingerul_danutz said:
I did get another motherboard, and now the phone is total functional.
Click to expand...
Click to collapse
Where did you buy new motherboard?
Related
Manually flashing a a stock rom as the flashall.bat freaks out and this is what happens,.
sending 'boot' (5898 KB)...
OKAY [ 0.922s]
writing 'boot'...
OKAY [ 0.297s]
finished. total time: 1.219s
sending 'recovery' (6398 KB)...
OKAY [ 1.250s]
writing 'recovery'...
OKAY [ 0.359s]
finished. total time: 1.609s
sending 'userdata' (98413 KB)...
OKAY [ 3.864s]
writing 'userdata'...
OKAY [ 5.012s]
finished. total time: 8.876s
sending 'system' (523357 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 420.405s
Have you tried to change USB ports/ cables?
Bouncer5 said:
Manually flashing a a stock rom as the flashall.bat freaks out and this is what happens,.
sending 'boot' (5898 KB)...
OKAY [ 0.922s]
writing 'boot'...
OKAY [ 0.297s]
finished. total time: 1.219s
sending 'recovery' (6398 KB)...
OKAY [ 1.250s]
writing 'recovery'...
OKAY [ 0.359s]
finished. total time: 1.609s
sending 'userdata' (98413 KB)...
OKAY [ 3.864s]
writing 'userdata'...
OKAY [ 5.012s]
finished. total time: 8.876s
sending 'system' (523357 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 420.405s
Click to expand...
Click to collapse
Have you tried just flashing the system.img on its own? Is it just me, or does that system image seem excessively large for a stock image? I would try a new cable, and maybe try redownloading the system img just in case.
ariesgodofwar said:
Have you tried just flashing the system.img on its own? Is it just me, or does that system image seem excessively large for a stock image? I would try a new cable, and maybe try redownloading the system img just in case.
Click to expand...
Click to collapse
Yea it is quite large, I have tried flashing the system.img on its own, It also eventually times out. I have also tried different system.img files. I have tried different USB cables, different USB ports, heck last night I even tried a different computer and OS! Still always fails.
At this point the only thing I was able to do with my phone was get Ubuntu Touch on it so it is just slightly more useful than a paperweight.
With Ubuntu Touch I have managed to get Cyanogenmod.zip onto the phone reflash the recovery and install the .zip I am now back on android, I cannot however get back to a stock image.
TLDR/update: false alarm, after a pc reboot. and leaving the shield unplugged for a few min. i was able to "adb reboot bootloader" then reflash with fastboot, all good now. mods feel free to delete this bs...
i downloaded the official 3.0 recovery image from nvidia and commented out the bit to flash there recovery so i could keep twrp just like i have previously w/o issues. now im stuck and cant seem to access the bootloader by holding the power button, adb, or fastboot. what other options do i have? flashing from update.zip on sd card?
Code:
./flash-all.sh
< waiting for any device >
target reported max download size of 67108864 bytes
sending 'staging' (3091 KB)...
OKAY [ 0.091s]
writing 'staging'...
OKAY [ 0.152s]
finished. total time: 0.243s
target reported max download size of 67108864 bytes
sending 'boot' (21772 KB)...
OKAY [ 0.527s]
writing 'boot'...
OKAY [ 1.024s]
finished. total time: 1.551s
rebooting...
finished. total time: 0.059s
< waiting for any device >
sending 'system' (1578475 KB)...
FAILED (command write failed (Protocol error))
finished. total time: 0.000s
target reported max download size of 67108864 bytes
erasing 'vendor'...
OKAY [ 0.164s]
sending sparse 'vendor' (65498 KB)...
OKAY [ 1.606s]
writing 'vendor'...
OKAY [ 3.285s]
sending sparse 'vendor' (65472 KB)...
OKAY [ 1.582s]
writing 'vendor'...
OKAY [ 2.895s]
sending sparse 'vendor' (65532 KB)...
OKAY [ 1.611s]
writing 'vendor'...
OKAY [ 3.437s]
sending sparse 'vendor' (48152 KB)...
OKAY [ 1.196s]
writing 'vendor'...
OKAY [ 2.448s]
finished. total time: 18.223s
rebooting...
if it didnt sent the reboot command i could have seen the error and hopefully fixed it. guess i gave nvidia too much credit for error detection in there script.
Hello everybody, I've been using a Zuk Z1 since november and I'm quite satisfied with it.
Some months ago, the G Sensor stopped to work. I've tried the calibration, it seems successful but it doesn't work at all. So I'd like to try another rom, hoping it'll be working again.
Some months ago, I installed Cyanogenmod 13 and, immediately after, ZUI but it didn't work correctly with my smartwatch so I dediced to go back to the original COS, also restoring Cyanogen Recovery. Now I can't flash anything from fastboot: both on Windows 10 and Linux (on three different computers), I can use ADB when the phone is on COS, but when in fastboot I get a "unable to enumerate usb device" and isn't recognised at all.
Is there anything I can try go get out of this problem? I can go to recovery, but can't flash anything as it says that the signature isn't correct.
Thank you.
draga said:
Hello everybody, I've been using a Zuk Z1 since november and I'm quite satisfied with it.
Some months ago, the G Sensor stopped to work. I've tried the calibration, it seems successful but it doesn't work at all. So I'd like to try another rom, hoping it'll be working again.
Some months ago, I installed Cyanogenmod 13 and, immediately after, ZUI but it didn't work correctly with my smartwatch so I dediced to go back to the original COS, also restoring Cyanogen Recovery. Now I can't flash anything from fastboot: both on Windows 10 and Linux (on three different computers), I can use ADB when the phone is on COS, but when in fastboot I get a "unable to enumerate usb device" and isn't recognised at all.
Is there anything I can try go get out of this problem? I can go to recovery, but can't flash anything as it says that the signature isn't correct.
Thank you.
Click to expand...
Click to collapse
I am having the exact same problem. I have to send the phone back for warranty.
I have been trying to use the ALL IN ONE Tool for ZUK and ZUK Tool Beta. Below is the message after which nothing happens. I will post more details and if someone can help me that will be great.
Flashing your Zuk Z1 back to stock. Please wait...
-----------------------------------------------
target reported max download size of 1610612736 bytes
sending 'persist' (4664 KB)...
OKAY [ 0.149s]
writing 'persist'...
OKAY [ 0.090s]
finished. total time: 0.239s
target reported max download size of 1610612736 bytes
sending 'modem' (58545 KB)...
OKAY [ 1.849s]
writing 'modem'...
OKAY [ 0.837s]
finished. total time: 2.686s
target reported max download size of 1610612736 bytes
sending 'sbl1' (280 KB)...
OKAY [ 0.012s]
writing 'sbl1'...
OKAY [ 0.010s]
finished. total time: 0.022s
target reported max download size of 1610612736 bytes
sending 'dbi' (17 KB)...
OKAY [ 0.004s]
writing 'dbi'...
OKAY [ 0.006s]
finished. total time: 0.010s
target reported max download size of 1610612736 bytes
sending 'aboot' (414 KB)...
OKAY [ 0.015s]
writing 'aboot'...
OKAY [ 0.017s]
finished. total time: 0.033s
target reported max download size of 1610612736 bytes
sending 'rpm' (189 KB)...
OKAY [ 0.009s]
writing 'rpm'...
OKAY [ 0.009s]
finished. total time: 0.018s
target reported max download size of 1610612736 bytes
sending 'splash' (562 KB)...
OKAY [ 0.021s]
writing 'splash'...
OKAY [ 0.013s]
finished. total time: 0.034s
target reported max download size of 1610612736 bytes
sending 'tz' (339 KB)...
OKAY [ 0.013s]
writing 'tz'...
OKAY [ 0.013s]
finished. total time: 0.026s
target reported max download size of 1610612736 bytes
sending 'boot' (6538 KB)...
OKAY [ 0.208s]
writing 'boot'...
OKAY [ 0.097s]
finished. total time: 0.305s
target reported max download size of 1610612736 bytes
sending 'recovery' (9168 KB)...
OKAY [ 0.292s]
writing 'recovery'...
OKAY [ 0.135s]
finished. total time: 0.427s
target reported max download size of 1610612736 bytes
erasing 'system'...
OKAY [ 0.086s]
sending 'system' (1546759 KB)...
I flashed the phone with fastboot with a non-branded STOCK ROM, file by file, when the phone was rebooted, it was branded TIM Italy, why?
Is it possible that fastboot, despite the video results, did not flasha anything?
I tried several ROMs without success.
Code:
D:\Cellulare\adb-and-fastboot>fastboot flash cust debrand\CUST.img
Sending 'cust' (134830 KB) OKAY [ 5.832s]
Writing 'cust' OKAY [ 3.059s]
Finished. Total time: 8.928s
D:\Cellulare\adb-and-fastboot>fastboot flash kernel debrand\KERNEL.img
Sending 'kernel' (45749 KB) OKAY [ 1.629s]
Writing 'kernel' OKAY [ 1.009s]
Finished. Total time: 2.676s
D:\Cellulare\adb-and-fastboot>fastboot flash ramdisk debrand\RAMDISK.img
Sending 'ramdisk' (11205 KB) OKAY [ 0.414s]
Writing 'ramdisk' OKAY [ 0.273s]
Finished. Total time: 0.726s
D:\Cellulare\adb-and-fastboot>fastboot flash recovery_ramdisk debrand\RECOVERY_RAMDIS.img
Sending 'recovery_ramdisk' (27893 KB) OKAY [ 0.998s]
Writing 'recovery_ramdisk' OKAY [ 0.630s]
Finished. Total time: 1.676s
D:\Cellulare\adb-and-fastboot>fastboot flash system debrand\SYSTEM.img
Sending sparse 'system' 1/6 (468550 KB) OKAY [ 19.835s]
Writing sparse 'system' 1/6 OKAY [ 12.017s]
Sending sparse 'system' 2/6 (513679 KB) OKAY [ 20.851s]
Writing sparse 'system' 2/6 OKAY [ 11.767s]
Sending sparse 'system' 3/6 (515737 KB) OKAY [ 20.873s]
Writing sparse 'system' 3/6 OKAY [ 12.012s]
Sending sparse 'system' 4/6 (517855 KB) OKAY [ 21.453s]
Writing sparse 'system' 4/6 OKAY [ 12.797s]
Sending sparse 'system' 5/6 (521377 KB) OKAY [ 21.275s]
Writing sparse 'system' 5/6 OKAY [ 11.808s]
Sending sparse 'system' 6/6 (57052 KB) OKAY [ 2.236s]
Writing sparse 'system' 6/6 OKAY [ 1.276s]
Finished. Total time: 222.547s
D:\Cellulare\adb-and-fastboot>fastboot reboot
Rebooting
Finished. Total time: 0.004s
D:\Cellulare\adb-and-fastboot>
hi,
i already posted this, 3 days ago in another root thread,
a friend of mine tried to flash his phone after bootloader unlocked ok, but after the flash phone bricked, and ask me for help, now I'm asking as well,
tried:
IMAGE Download Software - IDTML01Ver1001 and CAML00LMAA001063_Board_Software_null_null_Android_ 6.0_EMUI_4.1_05021XEW, it always gives error but it seems to flash the fastboot at least, so the phone from: huawei usb com 1.0 goes to fastboot, so in adb i try:
C:\SDK\platform-tools>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (455490 KB)...
OKAY [ 62.178s]
writing 'system' 1/6...
OKAY [ 30.954s]
sending sparse 'system' 2/6 (447920 KB)...
OKAY [ 25.925s]
writing 'system' 2/6...
OKAY [ 30.355s]
sending sparse 'system' 3/6 (460685 KB)...
OKAY [ 20.218s]
writing 'system' 3/6...
OKAY [ 31.334s]
sending sparse 'system' 4/6 (454527 KB)...
OKAY [ 19.641s]
writing 'system' 4/6...
OKAY [ 30.797s]
sending sparse 'system' 5/6 (458441 KB)...
OKAY [ 19.465s]
writing 'system' 5/6...
OKAY [ 30.925s]
sending sparse 'system' 6/6 (20484 KB)...
OKAY [ 0.859s]
writing 'system' 6/6...
OKAY [ 1.406s]
finished. total time: 304.135s
C:\SDK\platform-tools>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (253973 KB)...
OKAY [ 10.453s]
writing 'cust'...
OKAY [ 17.159s]
finished. total time: 27.612s
C:\SDK\platform-tools>fastboot flash userdata userdata.img
target reported max download size of 471859200 bytes
sending 'userdata' (44124 KB)...
OKAY [ 1.770s]
writing 'userdata'...
OKAY [ 3.053s]
finished. total time: 4.838s
C:\SDK\platform-tools>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (23514 KB)...
OKAY [ 1.188s]
writing 'boot'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 1.531s
C:\SDK\platform-tools>fastboot flash fastboot1 fastboot.img
target reported max download size of 471859200 bytes
sending 'fastboot1' (2194 KB)...
OKAY [ 0.141s]
writing 'fastboot1'...
FAILED (remote: image verification error)
finished. total time: 0.188s
C:\SDK\platform-tools>fastboot flash fastboot2 fastboot.img
target reported max download size of 471859200 bytes
sending 'fastboot2' (2194 KB)...
OKAY [ 0.063s]
writing 'fastboot2'...
FAILED (remote: partition does not exist)
finished. total time: 0.078s
C:\SDK\platform-tools>fastboot flash fastboot fastboot.img
target reported max download size of 471859200 bytes
sending 'fastboot' (2194 KB)...
OKAY [ 0.062s]
writing 'fastboot'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 0.156s
C:\SDK\platform-tools>fastboot flash cache cache.img
target reported max download size of 471859200 bytes
sending 'cache' (6248 KB)...
OKAY [ 0.312s]
writing 'cache'...
OKAY [ 0.453s]
finished. total time: 0.766s
C:\SDK\platform-tools>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (37966 KB)...
OKAY [ 1.531s]
writing 'recovery'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 2.031s
--------------------------------------------------------------------------------------------------
so I'm able to flash successfully
system, cust, cache and userdata
but not able:
recovery, fastboot or boot, and after i fastboot reboot,
again only red and green led and huawei usb com 1.0, to start again
thank you very much indeed, for any guide or help, or maybe a cam-l23 board software to try
Hi!
What software do you use?
I hard brico my P8 Lite ALE...
I download rom form Huawei finder and came a wrong one... -.-
So PC only see him as HUAWEI USB COM 1.0.
Your have a similar software, maybe we can hel each other!
Thanks.
hi
persona78 said:
Hi!
What software do you use?
I hard brico my P8 Lite ALE...
I download rom form Huawei finder and came a wrong one... -.-
So PC only see him as HUAWEI USB COM 1.0.
Your have a similar software, maybe we can hel each other!
Thanks.
Click to expand...
Click to collapse
you should try to find:
***IMAGE Download Software*** - IDTML01Ver1001 and CAML00LMAA001063_***Board_Software_null_null_Android***_ 6.0_EMUI_4.1_05021XEW
for your model
thanks to you, for your attention
atv said:
you should try to find:
***IMAGE Download Software*** - IDTML01Ver1001 and CAML00LMAA001063_***Board_Software_null_null_Android***_ 6.0_EMUI_4.1_05021XEW
for your model
thanks to you, for your attention
Click to expand...
Click to collapse
Hi!
Can you provid me that files and a litle tut how to use it?
.
On fastboot, can you unlock bootloader?
-
alguien con el board software