TLDR/update: false alarm, after a pc reboot. and leaving the shield unplugged for a few min. i was able to "adb reboot bootloader" then reflash with fastboot, all good now. mods feel free to delete this bs...
i downloaded the official 3.0 recovery image from nvidia and commented out the bit to flash there recovery so i could keep twrp just like i have previously w/o issues. now im stuck and cant seem to access the bootloader by holding the power button, adb, or fastboot. what other options do i have? flashing from update.zip on sd card?
Code:
./flash-all.sh
< waiting for any device >
target reported max download size of 67108864 bytes
sending 'staging' (3091 KB)...
OKAY [ 0.091s]
writing 'staging'...
OKAY [ 0.152s]
finished. total time: 0.243s
target reported max download size of 67108864 bytes
sending 'boot' (21772 KB)...
OKAY [ 0.527s]
writing 'boot'...
OKAY [ 1.024s]
finished. total time: 1.551s
rebooting...
finished. total time: 0.059s
< waiting for any device >
sending 'system' (1578475 KB)...
FAILED (command write failed (Protocol error))
finished. total time: 0.000s
target reported max download size of 67108864 bytes
erasing 'vendor'...
OKAY [ 0.164s]
sending sparse 'vendor' (65498 KB)...
OKAY [ 1.606s]
writing 'vendor'...
OKAY [ 3.285s]
sending sparse 'vendor' (65472 KB)...
OKAY [ 1.582s]
writing 'vendor'...
OKAY [ 2.895s]
sending sparse 'vendor' (65532 KB)...
OKAY [ 1.611s]
writing 'vendor'...
OKAY [ 3.437s]
sending sparse 'vendor' (48152 KB)...
OKAY [ 1.196s]
writing 'vendor'...
OKAY [ 2.448s]
finished. total time: 18.223s
rebooting...
if it didnt sent the reboot command i could have seen the error and hopefully fixed it. guess i gave nvidia too much credit for error detection in there script.
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
as far as i can see,you have flashed system.img and he work,now try again to flash via adb only system.img,wen is done,run command fastboot reboot an remove usb cable from phone and press and hold on volume button up to enter in recovery mod,once in recovery wipe data factory reset and wipe cache,it wiil delete all your memory phone,but it my work,so good luck
Hello Cristi,
Thank you for reply, i will try to flash only with system.img and then reboot.
Then I'll come back with the result.
There any other method to flash full memory ? (e.g. with SP_Flash_Tool ) Delete all data and then complete installation with full fw?
Bad News,
After I flash adb only with system.img and then reboot, push volume + & power, only light red light flashing slower.
Is possible that the bottom Volume UP, may not work
Do you have a NAND backup through TWRP?
What FW are you trying to flash?
What happened so that it shows this?
Try to flash with other version ... try to flash with b170
@ - Hello oziboy;
I don`t have a backup and i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common));
I don`t know the history .... the device has got to me so broken
@ - Hello VladHD;
i will try , thk for info.
Hi....
try first to flash with fastboot firmware b049 or b052,
when finished flashing then factory reset and wipe....
then local update 171 or 170....
ingerul_danutz said:
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
Click to expand...
Click to collapse
you can try here http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
I did get another motherboard, and now the phone is total functional.
K
Sent from my ALE-L21 using XDA-Developers mobile app
ingerul_danutz said:
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
Click to expand...
Click to collapse
My p8lite phone also soft bricked can you tell how did you unlocked your boot loader?
I use this method:
- Open Huawei Product ID Generator, then complete:
Product Model: U8815,
Product IMEI: imei from sim1;
and now you have Product ID generated;
now, Connect your phone via data cable to PC;
Switch it off and then by pressing volume down and power together make it in fastboot mode (in this mode you will see "Phone locked" in green color at bottom of screen)
- enter https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail login with ID facebook or create an account; and then complete with:
Product Model: U8815 - like Huawei Product ID Generator;
Product Serial Number: 16 characters ; will be found on the box of device or type command "fastboot devices", when you connect the phone in fastboot mode (volume down + power botton);
Product IMEI: imei from sim1 ;
Product ID: the code generated from Huawei Product ID Generator program;
Verification code: characters from picture;
and then submit; if everything is OK, the code will be generated;
type command: "fastboot oem unlock **************** "
where ************** is code generated on emui.huawei.com;
Good luck
ingerul_danutz said:
I did get another motherboard, and now the phone is total functional.
Click to expand...
Click to collapse
Where did you buy new motherboard?
Hello everybody, I've been using a Zuk Z1 since november and I'm quite satisfied with it.
Some months ago, the G Sensor stopped to work. I've tried the calibration, it seems successful but it doesn't work at all. So I'd like to try another rom, hoping it'll be working again.
Some months ago, I installed Cyanogenmod 13 and, immediately after, ZUI but it didn't work correctly with my smartwatch so I dediced to go back to the original COS, also restoring Cyanogen Recovery. Now I can't flash anything from fastboot: both on Windows 10 and Linux (on three different computers), I can use ADB when the phone is on COS, but when in fastboot I get a "unable to enumerate usb device" and isn't recognised at all.
Is there anything I can try go get out of this problem? I can go to recovery, but can't flash anything as it says that the signature isn't correct.
Thank you.
draga said:
Hello everybody, I've been using a Zuk Z1 since november and I'm quite satisfied with it.
Some months ago, the G Sensor stopped to work. I've tried the calibration, it seems successful but it doesn't work at all. So I'd like to try another rom, hoping it'll be working again.
Some months ago, I installed Cyanogenmod 13 and, immediately after, ZUI but it didn't work correctly with my smartwatch so I dediced to go back to the original COS, also restoring Cyanogen Recovery. Now I can't flash anything from fastboot: both on Windows 10 and Linux (on three different computers), I can use ADB when the phone is on COS, but when in fastboot I get a "unable to enumerate usb device" and isn't recognised at all.
Is there anything I can try go get out of this problem? I can go to recovery, but can't flash anything as it says that the signature isn't correct.
Thank you.
Click to expand...
Click to collapse
I am having the exact same problem. I have to send the phone back for warranty.
I have been trying to use the ALL IN ONE Tool for ZUK and ZUK Tool Beta. Below is the message after which nothing happens. I will post more details and if someone can help me that will be great.
Flashing your Zuk Z1 back to stock. Please wait...
-----------------------------------------------
target reported max download size of 1610612736 bytes
sending 'persist' (4664 KB)...
OKAY [ 0.149s]
writing 'persist'...
OKAY [ 0.090s]
finished. total time: 0.239s
target reported max download size of 1610612736 bytes
sending 'modem' (58545 KB)...
OKAY [ 1.849s]
writing 'modem'...
OKAY [ 0.837s]
finished. total time: 2.686s
target reported max download size of 1610612736 bytes
sending 'sbl1' (280 KB)...
OKAY [ 0.012s]
writing 'sbl1'...
OKAY [ 0.010s]
finished. total time: 0.022s
target reported max download size of 1610612736 bytes
sending 'dbi' (17 KB)...
OKAY [ 0.004s]
writing 'dbi'...
OKAY [ 0.006s]
finished. total time: 0.010s
target reported max download size of 1610612736 bytes
sending 'aboot' (414 KB)...
OKAY [ 0.015s]
writing 'aboot'...
OKAY [ 0.017s]
finished. total time: 0.033s
target reported max download size of 1610612736 bytes
sending 'rpm' (189 KB)...
OKAY [ 0.009s]
writing 'rpm'...
OKAY [ 0.009s]
finished. total time: 0.018s
target reported max download size of 1610612736 bytes
sending 'splash' (562 KB)...
OKAY [ 0.021s]
writing 'splash'...
OKAY [ 0.013s]
finished. total time: 0.034s
target reported max download size of 1610612736 bytes
sending 'tz' (339 KB)...
OKAY [ 0.013s]
writing 'tz'...
OKAY [ 0.013s]
finished. total time: 0.026s
target reported max download size of 1610612736 bytes
sending 'boot' (6538 KB)...
OKAY [ 0.208s]
writing 'boot'...
OKAY [ 0.097s]
finished. total time: 0.305s
target reported max download size of 1610612736 bytes
sending 'recovery' (9168 KB)...
OKAY [ 0.292s]
writing 'recovery'...
OKAY [ 0.135s]
finished. total time: 0.427s
target reported max download size of 1610612736 bytes
erasing 'system'...
OKAY [ 0.086s]
sending 'system' (1546759 KB)...
Hey, so my oneplus 2 was having some trouble so I got instructions from here
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449/
I followed it correctly and got to color OS...
But, then I flashed some oneplus ONE files by mistake.
target reported max download size of 536870912 bytes
sending 'modem' (57457 KB)...
OKAY [ 1.387s]
writing 'modem'...
OKAY [ 0.432s]
finished. total time: 1.819s
target reported max download size of 536870912 bytes
sending 'sbl1' (273 KB)...
OKAY [ 0.050s]
writing 'sbl1'...
OKAY [ 0.024s]
finished. total time: 0.074s
target reported max download size of 536870912 bytes
sending 'dbi' (11 KB)...
OKAY [ 0.040s]
writing 'dbi'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.060s
target reported max download size of 536870912 bytes
sending 'aboot' (445 KB)...
OKAY [ 0.050s]
writing 'aboot'...
OKAY [ 0.027s]
finished. total time: 0.077s
target reported max download size of 536870912 bytes
sending 'rpm' (186 KB)...
OKAY [ 0.040s]
writing 'rpm'...
OKAY [ 0.025s]
finished. total time: 0.065s
target reported max download size of 536870912 bytes
sending 'tz' (325 KB)...
OKAY [ 0.040s]
writing 'tz'...
OKAY [ 0.025s]
finished. total time: 0.065s
target reported max download size of 536870912 bytes
sending 'LOGO' (328 KB)...
OKAY [ 0.040s]
writing 'rpm'...
OKAY [ 0.025s]
finished. total time: 0.065s
target reported max download size of 536870912 bytes
sending 'tz' (325 KB)...
OKAY [ 0.040s]
writing 'tz'...
OKAY [ 0.025s]
finished. total time: 0.065s
target reported max download size of 536870912 bytes
sending 'LOGO' (328 KB)...
OKAY [ 0.040s]
writing 'LOGO'...
OKAY [ 0.025s]
finished. total time: 0.064s
target reported max download size of 536870912 bytes
sending 'oppostanvbk' (10240 KB)...
OKAY [ 0.267s]
writing 'oppostanvbk'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.286s
target reported max download size of 536870912 bytes
sending 'recovery' (9968 KB)...
OKAY [ 0.268s]
writing 'recovery'...
OKAY [ 0.106s]
finished. total time: 0.374s
target reported max download size of 536870912 bytes
erasing 'system'...
OKAY [ 0.463s]
sending sparse 'system' (518655 KB)...
OKAY [ 12.599s]
writing 'system'...
OKAY [ 4.229s]
sending sparse 'system' (515023 KB)...
OKAY [ 12.493s]
writing 'system'...
OKAY [ 4.952s]
sending sparse 'system' (184809 KB)...
OKAY [ 4.555s]
writing 'system'...
OKAY [ 1.804s]
finished. total time: 41.094s
target reported max download size of 536870912 bytes
sending 'boot' (7272 KB)...
OKAY [ 0.218s]
writing 'boot'...
OKAY [ 0.073s]
finished. total time: 0.291s
target reported max download size of 536870912 bytes
erasing 'cache'...
OKAY [ 0.031s]
sending 'cache' (10432 KB)...
OKAY [ 0.277s]
writing 'cache'...
FAILED (remote: size too large)
finished. total time: 0.326s
target reported max download size of 536870912 bytes
erasing 'userdata'...
OKAY [ 1.254s]
sending 'userdata' (141075 KB)...
OKAY [ 3.435s]
writing 'userdata'...
FAILED (remote: size too large)
finished. total time: 4.704s
rebooting...
finished. total time: 0.060s
Since then neither does it turn on. Nor is there fastboot boot.
It isn't recognized by Linux or windows.
No vibration on power button or ANYTHING.
PLEASE HELP ASAP.
try enter qualcomm recovery mode by hold volume up while connecting to usb cable on pc..the phone's screen will show nothing..you just to check whether if detected or not in your pc..if yes,you continue the below procedure:
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
Ok guys let me get to point fast!
I tried to flash 8.1 leaked beat build. connected my usb cable and executed flash_a_all.bat . There was inconsistency in connection my usb conected and disconnected for a moment and the bootloader turned all black.
No light on keys or from screen but vibrates when connection to computer or power + (vol +) or power + (vol-)
in my device manager, the phones is connnected as "Qualcomm HS-USB Diagnostics 900E"
this is how flashing ended
Please help me here guys !!!
HTML:
[HTML](bootloader) Device already : unlocked!
OKAY [ 0.030s]
finished. total time: 0.031s
target reported max download size of 534773760 bytes
sending 'modem_a' (86016 KB)...
OKAY [ 3.039s]
writing 'modem_a'...
OKAY [ 0.419s]
finished. total time: 3.459s
target reported max download size of 534773760 bytes
sending 'sbl1' (384 KB)...
OKAY [ 0.068s]
writing 'sbl1'...
OKAY [ 0.024s]
finished. total time: 0.094s
target reported max download size of 534773760 bytes
sending 'rpm' (172 KB)...
OKAY [ 0.038s]
writing 'rpm'...
OKAY [ 0.022s]
finished. total time: 0.063s
target reported max download size of 534773760 bytes
sending 'tz' (1516 KB)...
OKAY [ 0.088s]
writing 'tz'...
OKAY [ 0.028s]
finished. total time: 0.119s
target reported max download size of 534773760 bytes
sending 'devcfg' (40 KB)...
OKAY [ 0.039s]
writing 'devcfg'...
OKAY [ 0.023s]
finished. total time: 0.062s
target reported max download size of 534773760 bytes
sending 'dsp' (16384 KB)...
OKAY [ 0.590s]
writing 'dsp'...
FAILED (remote: check crc failed)
finished. total time: 0.806s
target reported max download size of 534773760 bytes
sending 'aboot' (584 KB)...
OKAY [ 0.047s]
writing 'aboot'...
FAILED (remote: check crc failed)
finished. total time: 0.079s
target reported max download size of 534773760 bytes
sending 'boot_a' (14880 KB)...
OKAY [ 0.540s]
writing 'boot_a'...
FAILED (remote: check crc failed)
finished. total time: 0.736s
target reported max download size of 534773760 bytes
Invalid sparse file format at header magic
sending sparse 'system_a' 1/6 (515622 KB)...
OKAY [ 17.525s]
writing 'system_a' 1/6...
OKAY [ 9.171s]
sending sparse 'system_a' 2/6 (510059 KB)...
OKAY [ 17.378s]
writing 'system_a' 2/6...
OKAY [ 9.401s]
sending sparse 'system_a' 3/6 (518707 KB)...
OKAY [ 17.880s]
writing 'system_a' 3/6...
OKAY [ 20.688s]
sending sparse 'system_a' 4/6 (481011 KB)...
OKAY [ 16.422s]
writing 'system_a' 4/6...
OKAY [ 8.830s]
sending sparse 'system_a' 5/6 (521581 KB)...
OKAY [ 17.874s]
writing 'system_a' 5/6...
OKAY [ 9.791s]
sending sparse 'system_a' 6/6 (308870 KB)...
OKAY [ 10.707s]
writing 'system_a' 6/6...
FAILED (status read failed (Too many links))
finished. total time: 156.759s
target didn't report max-download-size
sending 'lksecapp' (60 KB)...
FAILED (command write failed (No error))
finished. total time: 0.006s
target didn't report max-download-size
sending 'cmnlib' (204 KB)...
FAILED (command write failed (No error))
finished. total time: 0.003s
target didn't report max-download-size
sending 'cmnlib64' (256 KB)...
FAILED (command write failed (No error))
finished. total time: -0.000s
target didn't report max-download-size
sending 'keymaster' (224 KB)...
FAILED (command write failed (No error))
finished. total time: 0.000s
error: Device does not support slots
...
FAILED (command write failed (No error))
finished. total time: 0.004s
< waiting for any device >
rebooting...
finished. total time: 0.016s
Press any key to exit...
[/HTML]