To say the least, I got into more than I really wanted to. I have a Motorola droid razr m model XT907. It's rooted and GSM unlocked. I'm using it on Straight Talk currently. I'm pretty sure the bootloader's unlocked. Anyway, I tried to do a full restore from TBU. Granted, I probably did it wrong. When finished, it seemed like everything error-ed with it telling me that app or service has stopped working. So, I tried to reset back to factory. It would never finish booting. I tried to restore with the same result. There's no backup or anything on the SD card. Since then I've been trying to flash a new rom in it. I used House of Moto. It seemed the simplest way. After a lot of confusion, I finally figured out how to do it, maybe. I downloaded the correct files and arranged them according to the instructions. When I run it, it seems to do fine until the end, then it says it couldn't load the image file. So now I have an operating system that can't finish booting because it has nothing inside. Here's the log from House of Moto:
Please ensure your phone is:
o] Charged
o] Connected to USB using your OEM cable
o] USB drivers are installed
o] Booted to AP Fastboot mode: [power off, hold volume down and press power]
Ready to flash...
Press any key to continue . . .
Flashing: FULL_xt907.bat
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
rebooting into bootloader...
OKAY [ 0.007s]
finished. total time: 0.007s
< waiting for device >
sending 'partition' (32 KB)...
OKAY [ 0.014s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 0.296s
sending 'sbl1' (100 KB)...
OKAY [ 0.018s]
writing 'sbl1'...
OKAY [ 0.562s]
finished. total time: 0.581s
sending 'sbl2' (126 KB)...
OKAY [ 0.020s]
writing 'sbl2'...
OKAY [ 1.308s]
finished. total time: 1.330s
sending 'sbl3' (512 KB)...
OKAY [ 0.050s]
writing 'sbl3'...
OKAY [ 1.315s]
finished. total time: 1.365s
sending 'rpm' (140 KB)...
OKAY [ 0.066s]
writing 'rpm'...
OKAY [ 0.569s]
finished. total time: 0.638s
sending 'tz' (192 KB)...
OKAY [ 0.025s]
writing 'tz'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 0.319s
sending 'aboot' (256 KB)...
OKAY [ 0.030s]
writing 'aboot'...
OKAY [ 1.429s]
finished. total time: 1.461s
sending 'modem' (30720 KB)...
OKAY [ 2.311s]
writing 'modem'...
OKAY [ 2.793s]
sending 'modem' (17576 KB)...
OKAY [ 5.446s]
writing 'modem'...
OKAY [ 4.869s]
finished. total time: 15.423s
sending 'fsg' (2794 KB)...
OKAY [ 0.221s]
writing 'fsg'...
OKAY [ 2.268s]
finished. total time: 2.491s
erasing 'modemst1'...
OKAY [ 0.931s]
finished. total time: 0.932s
erasing 'modemst2'...
OKAY [ 1.319s]
finished. total time: 1.320s
sending 'logo' (1709 KB)...
OKAY [ 0.140s]
writing 'logo'...
OKAY [ 2.580s]
finished. total time: 2.720s
sending 'devtree' (512 KB)...
OKAY [ 0.049s]
writing 'devtree'...
OKAY [ 1.196s]
finished. total time: 1.248s
sending 'boot' (10240 KB)...
OKAY [ 1.148s]
writing 'boot'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 1.458s
sending 'recovery' (10240 KB)...
OKAY [ 0.778s]
writing 'recovery'...
OKAY [ 3.790s]
finished. total time: 4.570s
sending 'cdrom' (30720 KB)...
OKAY [ 2.587s]
writing 'cdrom'...
OKAY [ 4.473s]
sending 'cdrom' (22538 KB)...
OKAY [ 6.005s]
writing 'cdrom'...
OKAY [ 7.602s]
finished. total time: 20.671s
error: cannot load 'system.img.ext4'
erasing 'cache'...
OKAY [ 2.697s]
finished. total time: 2.698s
erasing 'userdata'...
OKAY [ 2.843s]
finished. total time: 2.844s
erasing 'tombstones'...
OKAY [ 1.698s]
finished. total time: 1.699s
rebooting...
finished. total time: 0.009s
Press any key to continue . . .
I tried the last two firmwares on this list. I have Android 4.1.2 installed. (Or at lease I did)
I used the fastboot scripts and rsd scripts from here
I don't know what I'm doing. I hope somebody can tell me what part is wrong. Help! I need my phone back.
Boot in to fast boot menu... Power device off then power on while holding all three buttons...volume up + volume down + power... Please provide the information listed on screen... Boot loader status..fast boot menu version and date...
Sent from my XT907 using xda app-developers app
:AP fastboot info
Here ya go:
AP Fastboot Flash Mode (S)
10.98(*) (sha-1e9f577, 2012-10-21 17:10:35)
EMMC Info: Size 8GB
I think I read it right, but here's a pic
Try this...http://forum.xda-developers.com/showthread.php?t=2249773 option one... Then make sure you unlock the boot loader before any update or you won't be able to later
Sent from my XT907 using xda app-developers app
Alright I'm ready to go for it, but the first thing I saw was "DO NOT USE THIS UTILITY ON THE LATEST 4.1.2 OTA UPDATE". Are they talking about my Android version, or the 98.18.78 update?
Update .78/.3... The version on your device is older then the one it flashes
Sent from my XT907 using xda app-developers app
That worked perfectly. All I have to do now is root it, unlock the bootloader and GSM again. I'll take the latest OTA when I finish that.
I can't thank you enough
Happy it worked for you...
Sent from my XT907 using xda app-developers app
I have a custom rom for this phone that's been debloated. Can I just swap the system image and XML document in the razr utility and flash it like I just did?
TLDR/update: false alarm, after a pc reboot. and leaving the shield unplugged for a few min. i was able to "adb reboot bootloader" then reflash with fastboot, all good now. mods feel free to delete this bs...
i downloaded the official 3.0 recovery image from nvidia and commented out the bit to flash there recovery so i could keep twrp just like i have previously w/o issues. now im stuck and cant seem to access the bootloader by holding the power button, adb, or fastboot. what other options do i have? flashing from update.zip on sd card?
Code:
./flash-all.sh
< waiting for any device >
target reported max download size of 67108864 bytes
sending 'staging' (3091 KB)...
OKAY [ 0.091s]
writing 'staging'...
OKAY [ 0.152s]
finished. total time: 0.243s
target reported max download size of 67108864 bytes
sending 'boot' (21772 KB)...
OKAY [ 0.527s]
writing 'boot'...
OKAY [ 1.024s]
finished. total time: 1.551s
rebooting...
finished. total time: 0.059s
< waiting for any device >
sending 'system' (1578475 KB)...
FAILED (command write failed (Protocol error))
finished. total time: 0.000s
target reported max download size of 67108864 bytes
erasing 'vendor'...
OKAY [ 0.164s]
sending sparse 'vendor' (65498 KB)...
OKAY [ 1.606s]
writing 'vendor'...
OKAY [ 3.285s]
sending sparse 'vendor' (65472 KB)...
OKAY [ 1.582s]
writing 'vendor'...
OKAY [ 2.895s]
sending sparse 'vendor' (65532 KB)...
OKAY [ 1.611s]
writing 'vendor'...
OKAY [ 3.437s]
sending sparse 'vendor' (48152 KB)...
OKAY [ 1.196s]
writing 'vendor'...
OKAY [ 2.448s]
finished. total time: 18.223s
rebooting...
if it didnt sent the reboot command i could have seen the error and hopefully fixed it. guess i gave nvidia too much credit for error detection in there script.
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
as far as i can see,you have flashed system.img and he work,now try again to flash via adb only system.img,wen is done,run command fastboot reboot an remove usb cable from phone and press and hold on volume button up to enter in recovery mod,once in recovery wipe data factory reset and wipe cache,it wiil delete all your memory phone,but it my work,so good luck
Hello Cristi,
Thank you for reply, i will try to flash only with system.img and then reboot.
Then I'll come back with the result.
There any other method to flash full memory ? (e.g. with SP_Flash_Tool ) Delete all data and then complete installation with full fw?
Bad News,
After I flash adb only with system.img and then reboot, push volume + & power, only light red light flashing slower.
Is possible that the bottom Volume UP, may not work
Do you have a NAND backup through TWRP?
What FW are you trying to flash?
What happened so that it shows this?
Try to flash with other version ... try to flash with b170
@ - Hello oziboy;
I don`t have a backup and i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common));
I don`t know the history .... the device has got to me so broken
@ - Hello VladHD;
i will try , thk for info.
Hi....
try first to flash with fastboot firmware b049 or b052,
when finished flashing then factory reset and wipe....
then local update 171 or 170....
ingerul_danutz said:
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
Click to expand...
Click to collapse
you can try here http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
I did get another motherboard, and now the phone is total functional.
K
Sent from my ALE-L21 using XDA-Developers mobile app
ingerul_danutz said:
Hello to all,
I have Huawei P8 Lite ALE-L21 device, for that i don`t know his history, but the present like that:
When i press power bottom, only red light flashing.
When i plug into charger or computer, the huawei logo appear, red light flashing and then restart;
The bootload was locked, but with your help (thank you vvvery much) from here, I succeeded to unlock;
Build number: ALE-L21C432B171;
Until now, i tray to flash with files from (ALE-L21C432B171(Single-SIM eu common))
Code:
G:\b171>fastboot devices
QLF7N15908016412 fastboot
G:\b171>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.507s]
writing 'boot'...
OKAY [ 0.668s]
finished. total time: 1.177s
G:\b171>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 0.722s]
writing 'recovery'...
OKAY [ 0.919s]
finished. total time: 1.641s
G:\b171>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (244905 KB)...
OKAY [ 5.429s]
writing 'cust'...
OKAY [ 4.171s]
finished. total time: 9.602s
G:\b171>fastboot flash system system.img
error: cannot load 'system.img'
G:\b171>mfastboot flash system system.img
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [ 20.512s]
writing 'system'...
OKAY [ 7.788s]
sending sparse 'system' (459817 KB)...
OKAY [ 16.610s]
writing 'system'...
OKAY [ 7.650s]
sending sparse 'system' (455971 KB)...
OKAY [ 16.108s]
writing 'system'...
OKAY [ 7.608s]
sending sparse 'system' (444362 KB)...
OKAY [ 15.639s]
writing 'system'...
OKAY [ 7.452s]
sending sparse 'system' (460302 KB)...
OKAY [ 15.998s]
writing 'system'...
OKAY [ 7.751s]
sending sparse 'system' (49397 KB)...
OKAY [ 1.733s]
writing 'system'...
OKAY [ 0.837s]
finished. total time: 125.740s
G:\b171>fastboot reboot
rebooting...
finished. total time: 0.022s
But after restart nothing happened, red light is flashing.
I put on sd-card//dload/update.app, and push simultaneous Volume + / - / power, the red flash flashing slower, and the screen is black.
Any ideas ?
Click to expand...
Click to collapse
My p8lite phone also soft bricked can you tell how did you unlocked your boot loader?
I use this method:
- Open Huawei Product ID Generator, then complete:
Product Model: U8815,
Product IMEI: imei from sim1;
and now you have Product ID generated;
now, Connect your phone via data cable to PC;
Switch it off and then by pressing volume down and power together make it in fastboot mode (in this mode you will see "Phone locked" in green color at bottom of screen)
- enter https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail login with ID facebook or create an account; and then complete with:
Product Model: U8815 - like Huawei Product ID Generator;
Product Serial Number: 16 characters ; will be found on the box of device or type command "fastboot devices", when you connect the phone in fastboot mode (volume down + power botton);
Product IMEI: imei from sim1 ;
Product ID: the code generated from Huawei Product ID Generator program;
Verification code: characters from picture;
and then submit; if everything is OK, the code will be generated;
type command: "fastboot oem unlock **************** "
where ************** is code generated on emui.huawei.com;
Good luck
ingerul_danutz said:
I did get another motherboard, and now the phone is total functional.
Click to expand...
Click to collapse
Where did you buy new motherboard?
I flashed the phone with fastboot with a non-branded STOCK ROM, file by file, when the phone was rebooted, it was branded TIM Italy, why?
Is it possible that fastboot, despite the video results, did not flasha anything?
I tried several ROMs without success.
Code:
D:\Cellulare\adb-and-fastboot>fastboot flash cust debrand\CUST.img
Sending 'cust' (134830 KB) OKAY [ 5.832s]
Writing 'cust' OKAY [ 3.059s]
Finished. Total time: 8.928s
D:\Cellulare\adb-and-fastboot>fastboot flash kernel debrand\KERNEL.img
Sending 'kernel' (45749 KB) OKAY [ 1.629s]
Writing 'kernel' OKAY [ 1.009s]
Finished. Total time: 2.676s
D:\Cellulare\adb-and-fastboot>fastboot flash ramdisk debrand\RAMDISK.img
Sending 'ramdisk' (11205 KB) OKAY [ 0.414s]
Writing 'ramdisk' OKAY [ 0.273s]
Finished. Total time: 0.726s
D:\Cellulare\adb-and-fastboot>fastboot flash recovery_ramdisk debrand\RECOVERY_RAMDIS.img
Sending 'recovery_ramdisk' (27893 KB) OKAY [ 0.998s]
Writing 'recovery_ramdisk' OKAY [ 0.630s]
Finished. Total time: 1.676s
D:\Cellulare\adb-and-fastboot>fastboot flash system debrand\SYSTEM.img
Sending sparse 'system' 1/6 (468550 KB) OKAY [ 19.835s]
Writing sparse 'system' 1/6 OKAY [ 12.017s]
Sending sparse 'system' 2/6 (513679 KB) OKAY [ 20.851s]
Writing sparse 'system' 2/6 OKAY [ 11.767s]
Sending sparse 'system' 3/6 (515737 KB) OKAY [ 20.873s]
Writing sparse 'system' 3/6 OKAY [ 12.012s]
Sending sparse 'system' 4/6 (517855 KB) OKAY [ 21.453s]
Writing sparse 'system' 4/6 OKAY [ 12.797s]
Sending sparse 'system' 5/6 (521377 KB) OKAY [ 21.275s]
Writing sparse 'system' 5/6 OKAY [ 11.808s]
Sending sparse 'system' 6/6 (57052 KB) OKAY [ 2.236s]
Writing sparse 'system' 6/6 OKAY [ 1.276s]
Finished. Total time: 222.547s
D:\Cellulare\adb-and-fastboot>fastboot reboot
Rebooting
Finished. Total time: 0.004s
D:\Cellulare\adb-and-fastboot>
hi,
i already posted this, 3 days ago in another root thread,
a friend of mine tried to flash his phone after bootloader unlocked ok, but after the flash phone bricked, and ask me for help, now I'm asking as well,
tried:
IMAGE Download Software - IDTML01Ver1001 and CAML00LMAA001063_Board_Software_null_null_Android_ 6.0_EMUI_4.1_05021XEW, it always gives error but it seems to flash the fastboot at least, so the phone from: huawei usb com 1.0 goes to fastboot, so in adb i try:
C:\SDK\platform-tools>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (455490 KB)...
OKAY [ 62.178s]
writing 'system' 1/6...
OKAY [ 30.954s]
sending sparse 'system' 2/6 (447920 KB)...
OKAY [ 25.925s]
writing 'system' 2/6...
OKAY [ 30.355s]
sending sparse 'system' 3/6 (460685 KB)...
OKAY [ 20.218s]
writing 'system' 3/6...
OKAY [ 31.334s]
sending sparse 'system' 4/6 (454527 KB)...
OKAY [ 19.641s]
writing 'system' 4/6...
OKAY [ 30.797s]
sending sparse 'system' 5/6 (458441 KB)...
OKAY [ 19.465s]
writing 'system' 5/6...
OKAY [ 30.925s]
sending sparse 'system' 6/6 (20484 KB)...
OKAY [ 0.859s]
writing 'system' 6/6...
OKAY [ 1.406s]
finished. total time: 304.135s
C:\SDK\platform-tools>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (253973 KB)...
OKAY [ 10.453s]
writing 'cust'...
OKAY [ 17.159s]
finished. total time: 27.612s
C:\SDK\platform-tools>fastboot flash userdata userdata.img
target reported max download size of 471859200 bytes
sending 'userdata' (44124 KB)...
OKAY [ 1.770s]
writing 'userdata'...
OKAY [ 3.053s]
finished. total time: 4.838s
C:\SDK\platform-tools>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (23514 KB)...
OKAY [ 1.188s]
writing 'boot'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 1.531s
C:\SDK\platform-tools>fastboot flash fastboot1 fastboot.img
target reported max download size of 471859200 bytes
sending 'fastboot1' (2194 KB)...
OKAY [ 0.141s]
writing 'fastboot1'...
FAILED (remote: image verification error)
finished. total time: 0.188s
C:\SDK\platform-tools>fastboot flash fastboot2 fastboot.img
target reported max download size of 471859200 bytes
sending 'fastboot2' (2194 KB)...
OKAY [ 0.063s]
writing 'fastboot2'...
FAILED (remote: partition does not exist)
finished. total time: 0.078s
C:\SDK\platform-tools>fastboot flash fastboot fastboot.img
target reported max download size of 471859200 bytes
sending 'fastboot' (2194 KB)...
OKAY [ 0.062s]
writing 'fastboot'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 0.156s
C:\SDK\platform-tools>fastboot flash cache cache.img
target reported max download size of 471859200 bytes
sending 'cache' (6248 KB)...
OKAY [ 0.312s]
writing 'cache'...
OKAY [ 0.453s]
finished. total time: 0.766s
C:\SDK\platform-tools>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (37966 KB)...
OKAY [ 1.531s]
writing 'recovery'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 2.031s
--------------------------------------------------------------------------------------------------
so I'm able to flash successfully
system, cust, cache and userdata
but not able:
recovery, fastboot or boot, and after i fastboot reboot,
again only red and green led and huawei usb com 1.0, to start again
thank you very much indeed, for any guide or help, or maybe a cam-l23 board software to try
Hi!
What software do you use?
I hard brico my P8 Lite ALE...
I download rom form Huawei finder and came a wrong one... -.-
So PC only see him as HUAWEI USB COM 1.0.
Your have a similar software, maybe we can hel each other!
Thanks.
hi
persona78 said:
Hi!
What software do you use?
I hard brico my P8 Lite ALE...
I download rom form Huawei finder and came a wrong one... -.-
So PC only see him as HUAWEI USB COM 1.0.
Your have a similar software, maybe we can hel each other!
Thanks.
Click to expand...
Click to collapse
you should try to find:
***IMAGE Download Software*** - IDTML01Ver1001 and CAML00LMAA001063_***Board_Software_null_null_Android***_ 6.0_EMUI_4.1_05021XEW
for your model
thanks to you, for your attention
atv said:
you should try to find:
***IMAGE Download Software*** - IDTML01Ver1001 and CAML00LMAA001063_***Board_Software_null_null_Android***_ 6.0_EMUI_4.1_05021XEW
for your model
thanks to you, for your attention
Click to expand...
Click to collapse
Hi!
Can you provid me that files and a litle tut how to use it?
.
On fastboot, can you unlock bootloader?
-
alguien con el board software