Database Users

GUIDE - Install TWRP Recovery and Root MOTO E Phone

WARNING!
Your warranty is void if you follow the given instruction in this guide. Read all the instruction very carefully and Perform everything at your own risk.
This guide is only for the MOTO E android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.
PRE-REQUISITES AND REQUIREMENTS
1. BACKUP YOUR ANDROID DATA
2. INSTALL MOTO E DRIVERS
3. ENABLE USB DEBUGGING MODE
4. CHARGE YOU ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
HOW TO INSTALL TWRP & ROOT MOTO E
Step 1. Download the Fastboot files for MOTE E and extract the folder on your desktop.
Step 2. Download The TWRP recovery from here (Rename the file to recovery.img) and extract in the same folder as of step 1.
Step 3. Download The SuperSU from here and copy it into the root of your internal memory,
Step 4. Now all the important files are with your. First you have to unlock the bootloader of your device. Read here.
Step 5. Connect your phone to PC and Reboot to bootloader by pressing VolumeDown + Power button for about 6-7 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6. Go to the Fastboot folder in step 1, Do Shift + RightClick in empty space in the folder without selecting anything, Select Open a command window here.
Step 7. Now you will see the command prompt window on your screen. In the command prompt window, you need to enter the below mentioned command;
fastboot flash recovery recovery.img
Step 8. Press Volume Down to select recovery on fastboot menu, then press Volume Up to confirm your choice to boot into recovery
Step 9. Now touch doesn’t work in recovery straight away, so wait 60 seconds without touching the phone, The phone screen will go blank.
Step 10. Press power button and do swipe to unlock to get your touch working again! Select Install, scroll down and find the SuperSU Zip downloaded in step 3.
Step 11. Swipe to confirm, wait untill the flash is complete and then select reboot. First reboot will take some time, so no need to worry.
Now check your MOTO E app drawer, There should be SuperSU installed. Congratulations you are rooted!
via @howtorootmobile

I think so this guide is already available!!

TheStrix said:
I think so this guide is already available!!
Click to expand...
Click to collapse
Yeah I did that guide earlier!

recovery flash error
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks

5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Write
Code:
mfastboot flash recovery recovery.img
it will work!

deej_roamer said:
Write
Code:
mfastboot flash recovery recovery.img
it will work!
Click to expand...
Click to collapse
Thanks for the help buddy but still it isnt working.

5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!

deej_roamer said:
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!
Click to expand...
Click to collapse
tried like 5 or 6 times buddy.. still no use.. i was able to unlock bootlocker without any trouble so i hope there is no trouble with moto drivers, i feel it might be due to fastboot file.. ill try again soon.. thanks

Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance

Ccceenu said:
Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance
Click to expand...
Click to collapse
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!

deej_roamer said:
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!
Click to expand...
Click to collapse
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance

Ccceenu said:
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance
Click to expand...
Click to collapse
No it wouldn't

moto e
i unlocked my bootloader can i directly install supersu from recovery without flashing custom recovery?

I guess....
5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Did you make sure that you actually 'Opened' the 'fastboot' folder and then press shift and right click....?

having same problem
5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Hey did u problem got sorted as I am having the same problem as u, kindly help me if anyone can

I tried to install twrp recovery but in cmd its shows an error
Error while loading recovery.img

Can I change my recovery from cwm to twrp
Sent from my Moto E using XDA Free mobile app

I am getting "partition size mismatch" error when i try to flash the TWRP recovery.

Unbrick method.

So you've bricked your phone. Well as long as the boot loader works then your "brick" is just a soft-brick. Follow this simple guide and flash a custom rom in a couple of minutes. I am not claiming ownership of this method, but its the first time Ive seen it and it helped me so here Good Luck!
Download the attachments.
Unzip both files to a folder on your desktop.
Run the adb setup file and press (Y) all 3 times.
Next unzip the twrp.zip folder. Then flash the twrp recovery by using the "fastboot flash recovery twrp.img" command. Make sure phone is in fastboot mode.
Next boot the phone into the recovery and select advanced. Then click on terminal command and navigate to the /sdcard/ folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lastly click "select" on the bottom right corner.
Now download whatever rom and gapps you would like to install on your phone and rename them to something short. Then open a command prompt at the directory where the rom and gapps are. In the command prompt enter these commands "adb push NAMEOFROM.zip /sdcard/" and "adb push NAMEOFGAPPS.zip /sdcard/".
The command prompt will not show change for a few minutes. After you notice the command prompt is ready for the next command it is okay to exit it.
Now just flash the rom and gapps normally and hopefully your phone will be okay.
Need any additional help? Feel free to ask This should work on all Moto G models that have a TWRP image and have a bootloader unlocked.

eg0097 said:
So you've bricked your phone. Well as long as the boot loader works then your "brick" is just a soft-brick. Follow this simple guide and flash a custom rom in a couple of minutes. I am not claiming ownership of this method, but its the first time Ive seen it and it helped me so here Good Luck!
Download the attachments.
Unzip both files to a folder on your desktop.
Run the adb setup file and press (Y) all 3 times.
Next unzip the twrp.zip folder. Then flash the twrp recovery by using the "fastboot flash recovery twrp.img" command. Make sure phone is in fastboot mode.
Next boot the phone into the recovery and select advanced. Then click on terminal command and navigate to the /sdcard/ folder. Lastly click "select" on the bottom right corner.
Now download whatever rom and gapps you would like to install on your phone and rename them to something short. Then open a command prompt at the directory where the rom and gapps are. In the command prompt enter these commands "adb push NAMEOFROM.zip /sdcard/" and "adb push NAMEOFGAPPS.zip /sdcard/".
The command prompt will not show change for a few minutes. After you notice the command prompt is ready for the next command it is okay to exit it.
Now just flash the rom and gapps normally and hopefully your phone will be okay.
Need any additional help? Feel free to ask This should work on all Moto G models that have a TWRP image and have a bootloader unlocked.
Click to expand...
Click to collapse
Everything went well till step 5.
In terminal window of phone i could find select..... but after that how to proceed I donot know.......... what commands should i use on TWRP terminal...........
Phone didn't get detected in ADB even in TWRP terminal
pl. help

subodhverma21 said:
Everything went well till step 5.
In terminal window of phone i could find select..... but after that how to proceed I donot know.......... what commands should i use on TWRP terminal...........
Phone didn't get detected in ADB even in TWRP terminal
pl. help
Click to expand...
Click to collapse
TWRP termnal is just so that your phone will connect as adb to your pc.

eg0097 said:
TWRP termnal is just so that your phone will connect as adb to your pc.
Click to expand...
Click to collapse
my problem got resolved.........
actually driver was the only problem which was not allowing ADB to detect device in RECOVERY mode, though device was detected in FASTBOOT mode
So I reinstall the driver to get ADB Interface installed in system> device manager
and then followed your remaining steps i.e. 6 onwards
Thanks a lot.....

Not really sure about the following, but I hard-bricked my phone while rooting it a few days ago. Black screen, phone wasn't visible in ADB / fastboot, LED didn't change after plugging in the charger etc.
The only thing that helped: holding the power button for at least 2 minutes. The device restarted afterwards w/o any issues.
Can't find the source of it anymore ...

Very useful guide, I revived my soft - bricked Moto G

still not working
on my xt1032 moto g 16gb version I just have the warning screen that the bootloader is unlocked.
followed a lot threads but nothing helped till now.
tried your verswion and from point 1 to 7 all went well.
But I can't flash the rom. i've tried out about 6 various rom's but everything it says fail. on the screen in the twrp always stands unable to mount /data /system /storage
what can I do to fix this problem?

sascha-1102 said:
on my xt1032 moto g 16gb version I just have the warning screen that the bootloader is unlocked.
followed a lot threads but nothing helped till now.
tried your verswion and from point 1 to 7 all went well.
But I can't flash the rom. i've tried out about 6 various rom's but everything it says fail. on the screen in the twrp always stands unable to mount /data /system /storage
what can I do to fix this problem?
Click to expand...
Click to collapse
|Could someone help please? I am in the same boat and when try to run the above command, I also get this error and no file appears in the sdcard hence cant flash it.
Thanks

My Moto G is working again since one week with stock 4.4.2. I had to do it ain a bit different way...
First, I could get into bootloader and recovery. after several hours my pc recognizes my phone again, but till now I don't know why and how.
Wanted to reflash stock 4.4.2 kitkat again, but this won#t work. so I figured out that after unpacking, I had to replace the gpt.bin with the one from the 4.4.4 stock update. (see down as zip file)
Then I flashed the 4.4.2 stock again to my phone and all went well. It started again. (now I'm on stock recovery)
If you want to do the OTA 4.4.4 Update, there have to be a few things on your phone, otherwise update always fails.
1. if you have x-posed frameworks installed - uninstall it completely
2. if rooted, go into super su preferences and activate unroot all
3. do not activate developper options, or if done before, just uncheck the mark
4. you must be on stock recovery!
5. restart your phone
6. now search after update in about phone.
if bootloader is unlocked - doesn't matter - can stay unlocked
with me it first installed the 176.* OTA because my flashed stock was still 175.*
this went well, then again searched for update and 210.* (4.4.4 kitkat) could be downloaded ota. after it was done, click to install and it should work well - took a bit time.
now you are on stock 4.4.4, but without root atm.
if you want root back - now flash the newest twpr recovery 2.7.7.1 to phone, because here an OTG USB stick will be also recognized - OTG cable needed before. (don't need to push files first to phone)
copied before the su.zip to usb stick and sticked it to phone, then go into recovery. here you can install super user or better su.zip. restart phone and you got your root back on 4.4.4 stock kitkat rom

I solved this issue with twrp sideload.It worked great.

Thanks it worked for me..BUT !!!
Hi and thanks a lot.. it worked for me but you have to add some more option for who are still having troubled in unbricking. like i had..
but it can't be done without your method as on OP..
how i got bricked !!! my Moto g dual (indian)
i tried to downgrade from 4.4.4 to 4.4.2 to flash custom Rom and got system partition corrupt.
again i tried to flash stock images but no use, actual problem was System and data was not formatting.
even if you try million times and you can never successfully flash stock images without error..
however i was checking many threads in xda to resolve this problem but couldn't figured it out, as i was not new to XDA i had confidence that i can come out from this issue. until this thread gave me a hint but not a solution but still this thread is a part of the solution
let come to the unbricking method (only for those who cant flash Stock firmware from fastboot)
Reboot to fastboot..
flash Philz recovery first. get it from here.. http://forum.xda-developers.com/showthread.php?t=2639626
better to use Kernel Flasher by my old buddy Ghostfreak NB http://forum.xda-developers.com/showthread.php?t=2214724,
you just need to extract and copy the recovery to extracted kernel Kernel_Flashing_Tool_v2.0 in IMG folder and run kernel Kernel_Flashing_Tool_v2.0.bat.
press 1 and it will flash recovery, press enter it will reboot to Philz recovery,
now format System, data and whatever you can!!\
next reboot to Bootloader from Recovery,
and then follow procedure as OP
if you want to flash stock rom get from here http://forum.xda-developers.com/moto-g/development/4-4-3-moto-g-stock-rom-t2804891 and adb push as advise by OP. now you have stock rom running without any issues
Edit..
You can also flash custom ROMs with ease.
Note you better flash recovery through kernel flasher tool..

Ysharief said:
Hi and thanks a lot.. it worked for me but you have to add some more option for who are still having troubled in unbricking. like i had..
but it can't be done without your method as on OP..
how i got bricked !!! my Moto g dual (indian)
i tried to downgrade from 4.4.4 to 4.4.2 to flash custom Rom and got system partition corrupt.
again i tried to flash stock images but no use, actual problem was System and data was not formatting.
even if you try million times and you can never successfully flash stock images without error..
however i was checking many threads in xda to resolve this problem but couldn't figured it out, as i was not new to XDA i had confidence that i can come out from this issue. until this thread gave me a hint but not a solution but still this thread is a part of the solution
let come to the unbricking method (only for those who cant flash Stock firmware from fastboot)
Reboot to fastboot..
flash Philz recovery first. get it from here.. http://forum.xda-developers.com/showthread.php?t=2639626
better to use Kernel Flasher by my old buddy Ghostfreak NB http://forum.xda-developers.com/showthread.php?t=2214724,
you just need to extract and copy the recovery to extracted kernel Kernel_Flashing_Tool_v2.0 in IMG folder and run kernel Kernel_Flashing_Tool_v2.0.bat.
press 1 and it will flash recovery, press enter it will reboot to Philz recovery,
now format System, data and whatever you can!!\
next reboot to Bootloader from Recovery,
and then follow procedure as OP
if you want to flash stock rom get from here http://forum.xda-developers.com/moto-g/development/4-4-3-moto-g-stock-rom-t2804891 and adb push as advise by OP. now you have stock rom running without any issues
Edit..
You can also flash custom ROMs with ease.
Note you better flash recovery through kernel flasher tool..
Click to expand...
Click to collapse
I get this error

When im typing adb push AOSP ( i renamed to that name ) /sdcard/ attacks me this: not found. Any help?:crying: Plez :c

eg0097 said:
So you've bricked your phone. Well as long as the boot loader works then your "brick" is just a soft-brick. Follow this simple guide and flash a custom rom in a couple of minutes. I am not claiming ownership of this method, but its the first time Ive seen it and it helped me so here Good Luck!
Download the attachments.
Unzip both files to a folder on your desktop.
Run the adb setup file and press (Y) all 3 times.
Next unzip the twrp.zip folder. Then flash the twrp recovery by using the "fastboot flash recovery twrp.img" command. Make sure phone is in fastboot mode.
Next boot the phone into the recovery and select advanced. Then click on terminal command and navigate to the /sdcard/ folder.
Lastly click "select" on the bottom right corner.
Now download whatever rom and gapps you would like to install on your phone and rename them to something short. Then open a command prompt at the directory where the rom and gapps are. In the command prompt enter these commands "adb push NAMEOFROM.zip /sdcard/" and "adb push NAMEOFGAPPS.zip /sdcard/".
The command prompt will not show change for a few minutes. After you notice the command prompt is ready for the next command it is okay to exit it.
Now just flash the rom and gapps normally and hopefully your phone will be okay.
Need any additional help? Feel free to ask This should work on all Moto G models that have a TWRP image and have a bootloader unlocked.
Click to expand...
Click to collapse
I haven't actually bricked my phone but looks like my ROM.
So, I am trying to make a ROM previously in First Built the ROM didn't even wrote System [That was my fault as I wrote the the 'system' folder in Zip as 'System' and in update scripts 'system' to be extracted in '/system']
But , now the ROM has written /system but remains on Warning Boot loader Locked screen and starts to warm up I have tried Installing Kernels to fix it but no luck please help.
Device->Moto G Falcon XT1033
ROM Details->Custom ROM based on stock 5.1
Priority of problem->5 ,as I use MultiRom and have this Custom ROM as Secondary and CM 13 as primary ,but suggest a fix ASAP .

@Sid_Sun - Flash the latest factory firmware image for your model. Once that boots, proceed to custom ROMs if desired.
Factory Firmware Image: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219

lost101 said:
@Sid_Sun - Flash the latest factory firmware image for your model. Once that boots, proceed to custom ROMs if desired.
Factory Firmware Image: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
My device is booting up I am trying to make a ROM which is not booting and the booting method is by MultiRom the not booting ROM is as secondary so I can use CM 13 as primary but not boot my Custom ROM I want a fix to that issue.

Sid_Sun said:
My device is booting up I am trying to make a ROM which is not booting and the booting method is by MultiRom the not booting ROM is as secondary so I can use CM 13 as primary but not boot my Custom ROM I want a fix to that issue.
Click to expand...
Click to collapse
The MultiROM thread would be the place to ask:
http://forum.xda-developers.com/moto-g/development/modmultirom-v30wip08-01-2014-t2997071​
I have no experience with MultiROM, but I believe a Kernel with kexec-hardboot support is required.

lost101 said:
The MultiROM thread would be the place to ask:
http://forum.xda-developers.com/moto-g/development/modmultirom-v30wip08-01-2014-t2997071​
I have no experience with MultiROM, but I believe a Kernel with kexec-hardboot support is required.
Click to expand...
Click to collapse
This isn't MiltiRom's Fault probably but nvm I will flash The Custom ROM as primary and see how it goes .

Friend in step 3 you say "Run the adb setup file and press (Y) all 3 times." But what is the file?
In the list there are only 2 to download files
adb-setup-1.3.zip
twrp.zip

Where do i put the command in the 4th step?
Please help

[GUIDE] How to * Unlock * Flash TWRP * Root * OnePlus X [Including Oxygen 3.1.3]

Notice: Rooting your device will break OTAs because they require an unmodified system, so you might want to check for updates before rooting your X. However, there is a workaround:
Boot into TWRP via step 5E below, but DO NOT flash it (step 5D)!!
Do a backup of your completely stock, unrooted ROM
Root the device by flashing SuperSU...zip
When an OTA hits, you can get it by doing this:
Boot into TWRP again without flashing it (same as step 1 above)
Restore your stock, unrooted ROM (from step 2 above)
Apply the update from stock recovery
Backup the unmodified ROM with the update if you want, then re-root as above.
Note: You will lose any changes, mods or app data since you did the backup, but hey, at least the OTA is applied.
If you get stuck with an update that won't flash and you haven't backed-up your unrooted ROM as above, look here:
[Guide] How to Install OTA's with TWRP, and please hit thanks for @SpiritBreak3r :good:
_____________________​
Disclaimer: Rooting does not void the OnePlus X’s warranty, though damaging your hardware (i.e., burning up your CPU by overclocking, hardbricking the device) will. You proceed at your own risk! I accept no responsibility for what you do with your phone. Follow the directions closely, and the odds are you will succeed without any trouble. If you are not sure what you are doing, do some more research before you try. If you get confused with terminology, try looking here for answers or Google it. If you get stuck, post a question in the thread—we're here to help you.
Preliminary steps​
1. Make sure that your phone is always charged above 50%!!!
Running out of battery in the middle of flashing something could brick your phone.
2. Make sure that your computer can properly communicate with the device:
We will be issuing commands to the phone from your PC via the USB cable using Android’s SDK tools, in particular ADB and fastboot. If you have not done so already, you must install the following on your Windows computer for this to work:
Java runtime
The Universal Android ADB Driver for Windows.
SDK tools for Android (alternately just ADB & fastboot). Remember where this is installed on your harddrive for later!
You can verify the connection between your PC and phone by running the following procedure:
A. With the phone booted normally, connect it to your computer with the USB cable.
B. Enable Android debugging by going to Settings > About phone and tapping on “Build number” 7 times.
C. Go to Settings > Developer options and check “Android debugging”. A dialogue box will appear asking you to authorize your computer’s RSA fingerprint. Click “Always allow...”
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
D. Open a command prompt in Windows and navigate to the folder where you put SDK tools for Android (ADB & fastboot) above.
E. Type the following command:
Code:
adb devices
You should get a return like this:
If you cannot get the connection to work:
1. Check your USB connection, then verify that Android debugging is enabled in settings and that your computer’s RSA fingerprint has been authorized.
2. Still not working? Open Device Manager in Windows and make sure that you don’t have a yellow exclamation point next to something like “Android Device” or “One.” This would indicate a driver problem that must be resolved. Try re-installing the Universal Android ADB Driver for Windows, and make sure to restart your computer. Once you’ve rebooted, if you still have a yellow triangle, right-click on the device and select “Update Driver Software,” then “Search automatically for updated driver software.”
3. If you still have a yellow exclamation point, then try forcing the driver to install:
In Device Manager, right-click on the device and select “Update Driver Software.”
Select “Browse my computer for driver software”
Select “Let me pick from a list of device drivers on my computer”
Select “ADB Interface” from the list
Select manufacturer “Google”
Select “Android Testing Interface Version xxx”
Click “Next.” If you get a warning, select “Yes” to continue and wait for the driver to install properly.
3. Know how to enter “fastboot mode” on the OnePlus X
To root the device, you must be competent at booting it into fastboot mode. There are two ways to accomplish this:
Power off the phone. Then simultaneously hold down the volume up & power buttons until it vibrates. When done correctly, you will see the words “Fastboot Mode” on a black screen. If not, you dumb-thumbed it, and the device will boot normally into Android. Power off the device and try again.
With the phone running Android normally and Android debugging enabled (see above), open a command prompt in Windows, navigate to the folder where you installed SDK tools (ADB & fastboot) and type:
Code:
adb reboot bootloader
Rooting the OnePlus X​
There are three essential steps to rooting the device:
Unlock the bootloader
Flash or boot into TWRP custom recovery [For OxygenOS 3.1.3 use TWRP blu_sp★rk r175]
Flash SuperSU...zip from recovery [For OxygenOS 3.1.3 use SuperSU v2.78 SR1 beta]
However, we're going to add a few more to protect your data and device in case something gets borked.
1. Backup your phone’s data
Unlocking the bootloader will involve doing a factory reset resulting in the loss of all accounts, emails, texts, apps and app data, pictures, music, etc. on the device. Move anything you need to keep onto your PC or a cloud service like DropBox.
2. Unlock the bootloader
2A.Go into Developer Options and enable bootloader unlocking
2B. Boot the device into fastboot mode. (Simultaneously hold down the volume up & power buttons until it vibrates.) You should see a black screen with the words “Fastboot Mode”.
2C. Plug in the USB cable.
2D. Verify that your device is connected with this command:
Code:
fastboot devices
You should get a return like the image above under Preliminary Steps
2E. Unlock the bootloader using the following commands:
Code:
fastboot oem unlock
The device will unlock the bootloader, erase all user data and reboot itself into Android. You will have to set up everything from scratch.
3. Re-enable Android debugging
3A. Re-enable Developer options by going to Settings > About phone and tapping on “Build number” 7 times.
3B. Go to Settings > Developer options. Check “Android debugging” and re-authorize your computer’s RSA fingerprint.
4. Download SuperSU zip
4A. Head over to Chainfire’s CF-Root thread and download the SuperSU access management tool from the “CWM / TWRP / MobileODIN installable ZIP” link. It will probably called something like UPDATE-SuperSU-v2.XX.zip. This zip file will root your device and install the SuperSU access management app in one smooth motion. Hit the thanks button for Chainfire or donate to his Paypal account and buy him a Coke.
NOTE: For OxygenOS 3.1.3 use SuperSU v2.78 SR1 beta
4B. Copy UPDATE-SuperSU-v2.XX.zip to your phone’s SD card.
5. Flash TWRP custom recovery
5A. Download TWRP recovery.
NOTE: For OxygenOS 3.1.3 use TWRP blu_sp★rk r175
5B. Place file you downloaded above to the location where you installed SDK tools (ADB & fastboot).
5C. Boot the device into fastboot mode and connect it to your computer with the USB cable.
5D. In this step, we will replace your stock recovery with TWRP recovery.
Note: This step is optional. If you want to root but preserve stock recovery, skip straight ahead to step 5E below. Thanks @rockuppl for the reminder. :good:
Open a command prompt in Windows and navigate to the folder where you installed SDK tools (ADB & fastboot). Type the following commands:
Code:
fastboot flash recovery twrp-3.0.0-0-onyx.img
5E. Reboot into TWRP recovery with the following command.
Code:
fastboot boot twrp-3.0.0-0-onyx.img
You should now see the custom recovery you just flashed, not the stock recovery.
6. Backup your stock ROM before making any changes
In TWRP press “Backup.” <--- See how simple this is???
Don’t be a noob—backup your device!!! Right now we don't have stock boot debuggable image files for the OnePlus X, so borking your device could leave you with a nice paperweight until we do. :crying: Restoring from a backup in recovery is easy, and only works if you've backed-up first
7. Root the device
7A. The device should still be in recovery from step 6 above. Go back to the main menu and press “Install,” find UPDATE-SuperSU-v2.XX.zip on the SD card, then flash it.
7B. Reboot the phone. It is now rooted!
7C. Go to the app drawer and open SuperSU. Update the binary if prompted. Its icon looks like this:
7D. Download and install Root Checker from the Play Store to verify that you have root access.

Yes I already own the phone and I see the bootloader unlock switch in dev options. I also checked the stock recovery which gives options to flash files from phone memory or otg. So it must be fairly easy. But I still don't want to risk it without it being tried and tested. If there were a custom recovery I could have also backed up the factory image. Only choice is to wait and see I guess

I could try today evening... will update here.

@CafeKampuchia
Is it ok to flash supersu.zip with stock recovery.
Before flashing supersu.zip, will unlock bootloader . Will follow the guide from oneplue two procedure to unlock..

Flashing supersu is safe on hundreds of devices, but I don't have the X so I can't say one way or the other.

I tried the OnePlus One tutorial to unlock bootloader and root it thanks to this guide.
When it comes to install TWRP, adb tells me it's ok but when I boot into recovery, it's the "official" one that show up.
Even from this recovery, I tried to install the SuperSU.zip, but it keeps telling me it failed, so I think I'll just wait for someone to do it correctly

Knockys said:
I tried the OnePlus One tutorial to unlock bootloader and root it thanks to this guide.
When it comes to install TWRP, adb tells me it's ok but when I boot into recovery, it's the "official" one that show up.
Even from this recovery, I tried to install the SuperSU.zip, but it keeps telling me it failed, so I think I'll just wait for someone to do it correctly
Click to expand...
Click to collapse
I wouldn't try flashing a recovery for another device, especially if the stock recovery isn't available.
I'm surprised that supersu wouldn't flash from stock, though.

CafeKampuchia said:
I wouldn't try flashing a recovery for another device, especially if the stock recovery isn't available.
I'm surprised that supersu wouldn't flash from stock, though.
Click to expand...
Click to collapse
Well I thought that TWRP was for all devices and I already went to the stock one before installing TWRP without success to flash SuperSU.
But apprently, installing TWRP the way I did wasn't the right way because I still boot to the stock recovery :/

Knockys said:
I tried the OnePlus One tutorial to unlock bootloader and root it thanks to this guide.
When it comes to install TWRP, adb tells me it's ok but when I boot into recovery, it's the "official" one that show up.
Even from this recovery, I tried to install the SuperSU.zip, but it keeps telling me it failed, so I think I'll just wait for someone to do it correctly
Click to expand...
Click to collapse
Hi, after unlocking bootloader, you are not able to update/flash supersu.zip from stock recovery? right?
if it so, then we need to wait for custom recovery to flash root.
Thanks.

Knockys said:
Well I thought that TWRP was for all devices and I already went to the stock one before installing TWRP without success to flash SuperSU.
But apprently, installing TWRP the way I did wasn't the right way because I still boot to the stock recovery :/
Click to expand...
Click to collapse
No, TWRP is definitely not for every device. You have to use the version made for your specific device.

CafeKampuchia said:
No, TWRP is definitely not for every device. You have to use the version made for your specific device.
Click to expand...
Click to collapse
My bad then ahah
mjose said:
Hi, after unlocking bootloader, you are not able to update/flash supersu.zip from stock recovery? right?
if it so, then we need to wait for custom recovery to flash root.
Thanks.
Click to expand...
Click to collapse
Yes it fails on stock recovery, we'll have to wait for a custom one indeed...

Hi, finally its available in oneplus forum
https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/
Thanks.

mjose said:
Hi, finally its available in oneplus forum
https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/
Thanks.
Click to expand...
Click to collapse
THIS WORKS! But beware using the recovery imagine provided there as in is in Mandarin, not English. Other than that it works fine! Already rooted

Savya said:
THIS WORKS! But beware using the recovery imagine provided there as in is in Mandarin, not English. Other than that it works fine! Already rooted
Click to expand...
Click to collapse
Hey i need your help, i installed the custom recovery in Mandarin but i don't understand anything! Could you please tell me where i should go in this recovery to wipe dalvik cache and flash super su? Step by step? Thanks!

Works for me too ! I'll try to install Xposed now ahah !
Hope they'll release TWRP in English soon !
EDIT : Xposed installed and working ! For those who don't know how to do, see here

mjose said:
Hi, finally its available in oneplus forum
https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/
Thanks.
Click to expand...
Click to collapse
I'll update the OP, but I won't make it a noob friendly guide until we have an English TWRP from a known/trusted developer.
Edit: I tried thanking your post, but I'm out of thanks for the day--8 post limit

CafeKampuchia said:
I'll update the OP, but I won't make it a noob friendly guide until we have an English TWRP from a known/trusted developer.
Edit: I tried thanking your post, but I'm out of thanks for the day--8 post limit
Click to expand...
Click to collapse
I've requested the OP for an English version and hopefully he'll post a link soon.
And that's okay you can thank me later xD

Savya said:
I've requested the OP for an English version and hopefully he'll post a link soon.
And that's okay you can thank me later xD
Click to expand...
Click to collapse
I have english version repacked from original source
https://www.dropbox.com/s/zypo7b41lvj0r2h/en-recovery-twrp-onyx-.img?dl=0

ukanth said:
I have english version repacked from original source
https://www.dropbox.com/s/zypo7b41lvj0r2h/en-recovery-twrp-onyx-.img?dl=0
Click to expand...
Click to collapse
Just flashed it now!
Confirmed that its working and its in English!
Thanks a ton mate!
Also do i have your permission to post your link in the oneplus forums? As there are many users there too waiting for an english version.

@ukanth : shared the recovery on my post on the OP forums
https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/

Bootlooped/bricked/returning to stock ...see the method here

You may be have got attracted to those new roms out there on the internet and would have probably bricked your device.Or maybe did some modding and in worst case somehow your phone bootlooped.
so please follow the guide for unbricking or solving bootloop issues:
CAUTION:
[1] FIRST OF ALL, I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
[2] NEVER UNPLUG THE USB CABLE WHILE FLASHING IS IN PROGRESS.IT MIGHT PERMANENTLY BRICK UR DEVICE..
ONLY FOR ZENFONE 5,A501CG/00CG
download the required files:
[1] kitkat firmware: for zenfone5(a501cg/00cg only other zf5 users download appropriate firmware from asus support page): http://dlcdnet.asus.com/pub/ASUS/ZenFone/A500CG/UL-ASUS_T00F-WW-2.21.40.44-user.zip
[2] adb/fastboot files: from here
[3] device drivers:if you do not have device drivers download and install pc link on pc from asus website,it will automatically install device drivers on your pc.(download from: http://liveupdate01.asus.com/pub/ASUS/LiveUpdate/Release/ZenFone/APP/LinkRim/PCLinkSetup.exe)
IF U R BRICKED PROCEED FROM STEP 2 ELSE FOR BOOTLOOP START FROM STEP 1:
step 1] try booting into recovery and perform a factory rest and wipe cache if this solves the bootloop(in most cases it should).if it still bootloops then follow the following tutorial
step 2]extract the fastboot files on the desktop and paste the firmware(it will be in .zip)in the fastboot folder
step 3]after copying the firmware also extract and copy the recovery.img and fastboot.img file from the firmware into the fastboot folder. (don't remove original firmware zip)
now your fastbootfolder should contain fastboot files+recovery.img+fastboot.img+firmware you dowloaded(compressed in .zip)
step4]boot into the fastboot by switching off the phone and powering it on by power+vol up key until asus logo comes up
if u r returning from some other rom u need to relock the bootloader so scroll some below to see how to relockbootloader.
step5]once you booted to fastboot ,open command promt in fastboot folder (downloaded earlier) by pressing right click+shift in any blank space on folder screen and selecting open command promt here.
in cmd write:
step6]
Code:
fastboot flash fastboot fastboot.img
step7] fastboot reboot-bootloader
wait until reboot is complete then write
step8]
Code:
fastboot flash recovery recovery.img
fastboot reboot-bootloader
step9] now we will be erasing data and cache for a clean flashing
Code:
fastboot clear data
fastboot clear cache
both of them take time and screen may turn off to save power so don't panic
next use volume keys to navigate to recovery and select it using power key .once your phone boots up showing android with belly open symbol press and hold volume up+volume down until recovery menu appears.if that does not open recovery try this:
hold volume down button, click and release vol up button,,,then finally release vol down button.
i admit it brothers,,it is sometimes really difficult to boot into recovery...but keep trying,,it is a bit difficult but is fruitful
if it doesnt appears it may be due to unssucceful flashing, unplug usb cable,force switch off phone by holding power button for few seconds.now again boot in bootloader by power button and vol up key and repeat from :step[8]
once in recovery select apply update from adb
step10] write on cmd
Code:
adb sideload <downloaded firmware name>.zip
for convenience you can rename firmware to kk.zip or any thing you like so command will be adb sideload kk.zip(it may take 15 to 20 mins)
step 11]once thats done select wipe data and cache in recovery and at last select reboot from recovery menu(dont skip this else you may face freezing on welcome screen itself)
hopefully you will boot into homescreen and be patient first bootup may take upto 20 mins.
[UPDATE] HOW TO RELOCK BOOTLOADER{only for zenfone 5 other device users pls google the procedure}
(USE THIS ONLY IF U R RETURNING FROM ANY CUSTOM ROM ITS NOT NEEDED FOR BOOTLOOPING PROBLEM)
hi guys i know u will be needing to relock the bootloader while returning to stock rom..
so what u have do is use the following steps before flashing fastboot.img that is before STEP [5] mentioned above
[1] download this file (its a zip file extract it using password zenfone-five.blogspot.com)...(link=https://drive.google.com/file/d/0B0o7qWuG7vvVRE9CV0hJWGRJS2c/view?usp=sharing)
[2]follow the on screen instructions
after the bootloader is locked carry on the steps from step[5]
PLEASE NOTE---THE UNLOCKING/LOCKING TOOL PROVIDED ABOVE IS NIETHER WRITTEN NOR OWNED BY ME...ALL CREDIT GOES TO ITS RESPECTIVE DEVELOPERS
this method can be used for:
1]unbricking
2]returning to stock rom
3]bootloop issues
IF YOU ARE NOT ABLE TO BOOT INTO FASTBOOT(maybe stuck on usb logo)--see this: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=33800 it is written by asus guys and will help you
thanks
if you face any issue please ask in comments...........
sources and credits===== www.windroidica.in
SCREENSHOTS DISCRIPTION:
pic 1] sideloading in progress
pic 2] the screen you will get when u will perform step [10] ( ignore the error "can't open /tmp/update-script.log")
pic 3]sideloading in progress (ignore the error: "please upgrade to newest 4.3 first")
pic 4] sideloading complete
NOT HITTING THANKS WILL LEAD TO A ZOMBIE APOCLYPSE(JUST KIDDING) ........dont forget to hit thanks!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Kitkat link isn't working. Can I download it from another site? (Yes, it is a beginner problem )

DogeLordTR said:
Kitkat link isn't working. Can I download it from another site? (Yes, it is a beginner problem )
Click to expand...
Click to collapse
I wonder why it isn't working..... Yes u can download it from other sources. I will update the link as soon as possible...
update= download link working now...i omitted a "/" symbol and that gave the error

reserved----

AWESOME
Thanks for solution dude! You rock!

DogeLordTR said:
Thanks for solution dude! You rock!
Click to expand...
Click to collapse
Thanks bro... Ask for help anytime

hi, i have follow all the step, but until adb sideload <filename>.zip, it say at command prompt "error: device not found"
Now the phone stuck at asus logo.. :crying::cryinglease help......

zldjian said:
hi, i have follow all the step, but until adb sideload <filename>.zip, it say at command prompt "error: device not found"
Now the phone stuck at asus logo.. :crying::cryinglease help......
Click to expand...
Click to collapse
already solved the problem by using the method on this thread..
http://forum.xda-developers.com/zenfone-5/help/config-factory-partition-backup-t3316469

zldjian said:
already solved the problem by using the method on this thread..
http://forum.xda-developers.com/zenfone-5/help/config-factory-partition-backup-t3316469
Click to expand...
Click to collapse
great you have your problem solved,the error you were facing due to wrong drivers.

Cant boot recovery mode..
I am not able to boot into recovery mode..

rsunilkumar92 said:
I am not able to boot into recovery mode..
Click to expand...
Click to collapse
provide me more details. is it after flashing recovery.img? what is opening instead of recovery?

[email protected] said:
provide me more details. is it after flashing recovery.img? what is opening instead of recovery?
Click to expand...
Click to collapse
when i select recovery in bootloader, device will restart and stuck with the very frst logo.... "ASUS & Android Logo"

rsunilkumar92 said:
when i select recovery in bootloader, device will restart and stuck with the very frst logo.... "ASUS & Android Logo"
Click to expand...
Click to collapse
whats the current installed recovery?

[email protected] said:
whats the current installed recovery?
Click to expand...
Click to collapse
i tried TWRP ond also stock recovery

rsunilkumar92 said:
i tried TWRP ond also stock recovery
Click to expand...
Click to collapse
then try a guide on the forums by the name "de-brick with ruined partitions" i dont remember correctly but you'll find it easily

Fix bootloop in redmi note 3 (no recovery ,no edl mode)

After trying to flash the latest 7.1.1 cm 14 ropms many people ended up in bootloop where your phone switch on ,shows mi logo and rebbot again. Many where not able to enter recovey mode also.. Now i come up with a perfect soluton for you all on how to fix these issues in your phone..Lets Get started..
If anything goes wrong iam not responsible.Do it At your Own Risk.
Requirements
------------------
1. Enter edl .rar (attached below)
2.Miui Stock Rom (FastBoot). Download it from(only use this version) here
3.Phone Must have Charge of 50% or more.
4.Unlock Boot loader.zip (Attched Below)
6.MIPhone Tools and install it .Get it from here
6.Extract all the file
7. PDA Net.(Optional,but installing will be useful). Get it from here
Once you have all of the file we can move on
Steps
------
1. Put Your Phone into fastboot mode by pressing Vol Down and power button at same time.
2.Connect your Phone With Your PC
3.Run EDL Mode.exe from the zip Enter edl.. Now your phone must be in edl mode. You can see a light blinking at the top of your phone.
4. From the Unlock Boot Loader folder copy "emmc_appsboot.mbn" to the rom folder ie)
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global--> images--> paste it there (replace/overwrite if existing)
5. Once the above step is done, Open MIFlash tool as administrator. Browse the folder
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global and select it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.From the drop Down Menu Select Advanced.
7.Set Fastboot Script As Flash_ALL.Bat.
8.Set Flash Programmer As prog_emmc_firehose_8976_ddr.mbn from images folder.
9. Set RAW Xml File as rawprogram*.xml from images folder
10. Set Patch XML File as patch*.xml from images folder.
11. Video Help HERE.... Watch from 2.40 (Ignore the other portion,We dont need that Part)
Special [email protected] for the video.. I didn't made that video..
12. Once The Above step is done. Click REFRESH OPTION,and you will see Phone detected By The Name COMXX.(XX will be a number)
13.Click Flash and Wait for some time and allow the phone to reboot.
14.Once all the step is done your phone will be good to use..:fingers-crossed: :fingers-crossed:
UNLOCKING BOOT LOADER AND INSTALLING TWRP AGAIN
-------------------------------------------------------------------------
1.Once Your Phone Reboots successfully enable USB Debugginf From Developer Option.
2.Connect Your phone to your PC and Open CMD as administrator.
3.Type in "adb devices".
4. Cmd will show a random number and Device (Everyone will be knowing this,but for info only iam writing it here)
5.Type "adb reboot bootloader". Now your phone will boot into fastboot mode.
6.Type "fastboot oem device-info" to get device status.
7.Type "fastboot oem unlock-go" to unlock bootloader.
8.Again type "fastboot oem device-info" to check to find if device is unlocked.(Do not reboot YET)
9. Now Downlaod TWRP from HERE
10. Now Got to the folder containig TWRP . By holding the Shift Key Of key Board ,right click the mouse and select OPEN COMMAND WINDOW HERE.
11. Type "fastboot flash recovery recovery_filename.img"
12.Type "fastboot reboot".
You Phone will be good to go. If anything goes wrong or you have any doubt Comment Below do not pm me..i will not reply..
If this thread helpef you thumbs up and do comment and shre this post

So i do not need to unlock the boot loader before using MiTool to flash phone via EDL

ahh988 said:
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
Click to expand...
Click to collapse
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool

adithyan25 said:
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
Click to expand...
Click to collapse
I did that but phone is still stuck . I'm getting infinite boot animation ?

ahh988 said:
I did that but phone is still stuck . I'm getting infinite boot animation ?
Click to expand...
Click to collapse
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed

adithyan25 said:
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
Click to expand...
Click to collapse
I am stuck at boot animation with the three white dots spinning for ever ? will try to do as you said

I tried fastboot oem unlock-go but i get response: token verification failed and device still stuck on bootanimation

well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful

nitephoenix said:
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
Click to expand...
Click to collapse
always my pleasure
For some mi unlock stucks at 50%.. I was one of them...every time I try fails...so I found this was the only way for those who can't access it using mi unlock

tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted

nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
Yeah...I know that...but it does not support volte. .only abhisheks fw sprt volte

nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks

Pleroma said:
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Click to expand...
Click to collapse
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe

nitephoenix said:
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
Click to expand...
Click to collapse
I used to flash it via twrp ..(by deleting bootllader file) followed by flashing lazyflasher...I didn't faced any prblm yet

Mine behaves different
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.

sarabeshsab said:
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
Click to expand...
Click to collapse
Probably the problem with bootloader file

not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.

Jjleininger said:
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Click to expand...
Click to collapse
Download eiter China based ROM or ROM from post.
Mi flash tool have many prolems.
Some tips:-
Make sure driver enforcement is disabled in PC.
All drivers including PDA net is installed.
Copy paste the unlocked bootloade file inside images folder and replace original one. Even after tryig this method it fails try my other method unbrick viafasrboot

uhm, this does not work for some reason...
i did everything as you said but in the end it just says cathasrophic error and something

After flashing i get Mi logo, vibration and reboot, please help