Related
Opening this thread for discussion and questions for Paranoid-neXus ROM by neXus PRIME upon his suggestion.
As a first query, I would like to ask how can I show battery percentage with the icon? Can't seem to find the option? And are there not any pie specific preferences to make 2 layers etc?
shahrukhqasim said:
Opening this thread for discussion and questions for Paranoid-neXus ROM by neXus PRIME upon his suggestion.
As a first query, I would like to ask how can I show battery percentage with the icon? Can't seem to find the option? And are there not any pie specific preferences to make 2 layers etc?
Click to expand...
Click to collapse
Go in settings, battery and click the first icon on top left that show you the option for battery icon
Cornhelius said:
Go in settings, battery and click the first icon on top left that show u the option for battery icon
Click to expand...
Click to collapse
Got it thanks! And what about options for pie controls? not present?
shahrukhqasim said:
Got it thanks! And what about options for pie controls? not present?
Click to expand...
Click to collapse
@all
Pie control doesn't have preference, you can start it with click the "immersive mode" tile
Reset preference: Go in settings, backup & restore, reset preference
Hover doesn't have preference, can start with click the second icon in the notification bar
Peek show the last notification if you move the device when the screen is off, start in Settings, Display, Peek notification
If I've forget something let me know
Cornhelius said:
@all
Pie control doesn't have preference, you can start it with click the "immersive mode" tile
Reset preference: Go in settings, backup & restore, reset preference
Hover doesn't have preference, can start with click the second icon in the notification bar
Peek show the last notification if you move the device when the screen is off, start in Settings, Display, Peek notification
If I've forget something let me know
Click to expand...
Click to collapse
Actually it had in SlimROM. Anyway, no matter. I didn't know about peek notification - going to check it. How much battery life are you getting?
I'm around 40 hours with medium usage. But I run build #3
Build # 4 is stable and base for future, new recoveries.
---------- Post added at 07:00 PM ---------- Previous post was at 06:56 PM ----------
Expected change log build #5
Source update
New busybox
Added reboot to recovery support from Rom - it didn't work earlier
theme chooser from cm11 stable branch
I'm thinking of adding a file manager in Rom because sometimes it is needed after clean reinstall.
Any suggestions guys???
neXus PRIME said:
...
I'm thinking of adding a file manager in Rom because sometimes it is needed after clean reinstall.
Any suggestions guys???
Click to expand...
Click to collapse
How about Root Browser?
File manager is first app what to need install.
MK99 said:
How about Root Browser?
File manager is first app what to need install.
Click to expand...
Click to collapse
I think CM-file manager is good (open source as well). Just this one app. I dont wanna bloat up.
neXus PRIME said:
I think CM-file manager is good (open source as well). Just this one app. I dont wanna bloat up.
Click to expand...
Click to collapse
It's great app also. It's fine.
neXus PRIME said:
I think CM-file manager is good (open source as well). Just this one app. I dont wanna bloat up.
Click to expand...
Click to collapse
+1
I'm now using build #3 and I've flash the new recovery posted by MrSteve..can I flash directly build #5 when it's ready??
@Cornhelius
Yes, you can flash #5 directly.
Is there any problem with gaming?? I installed "escape from rio" game and there were no levels are visible.... I had same problem "slimkat LBL' but there was no problem in cm11 nightly (my last rom used) but gaming performance is better on stock kernel based rom like slimkat LBL & paranoid LBL...
Sent from my C5303 using XDA Premium 4 mobile app
Build # 5
- CM File Manager
- Updated source, PA 4.4.1
- When you reboot to Recovery from Rom, its working now. Before, it was just normal reboot. Default Philz, otherwise according to key press.
Thanks MrSteve555
- Rear Mic Fixes, please test and report
Click to expand...
Click to collapse
DL Links:
LINK REMOVED> USE v4
This is the regular build. No wipes needed. Just flash over previous.
NOTE: I am also building with LINARO 4.8 right now. Meaning, even more preformance increase in theory, but you guys will test and report.
Once i get enough feedback, then 4.8 will be our default toolchain going forward. (Until i test 4.9, that is )
@ ALL
I have locked the dev thread to keep my post fresh. Just post all questions here, I will reopen that thread soon, dont worry.
Regards
neXus PRIME
neXus PRIME said:
Build # 5
rear mic is fixed? ill tested... but if this work.. cn it be updated to cm repo? soo it cn be fixed to all cm based? this really good news!!
Click to expand...
Click to collapse
@TO all
Just tested, any mic doesn't work... My patch didn't work very well...
To fix it you must change a line in build.prop:
persist.audio.handset.mic=digital
to
persist.audio.handset.mic=analog
Sorry for inconveinience.
I'll upload a fixed build soon, but until that comes, you will have to change that line in build.prop.
MrSteve555 said:
@TO all
Just tested, any mic doesn't work... My patch didn't work very well...
To fix it you must change a line in build.prop:
persist.audio.handset.mic=digital
to
persist.audio.handset.mic=analog
Sorry for inconveinience.
I'll upload a fixed build soon, but until that comes, you will have to change that line in build.prop.
Click to expand...
Click to collapse
Give me fixed build link. I have removed my upload.
neXus PRIME said:
Give me fixed build link. I have removed my upload.
Click to expand...
Click to collapse
Here's a link to the fixed build:
https://mega.co.nz/#!nUAxUZ7L!EFhvmmK_dgU1j-WohBji_diwEnemQH1CZlXeslWMxa4
Again, sorry for that issue. I didn't expect it to happen.
neXus PRIME said:
Build # 5
DL Links:
LINK REMOVED> USE v4
This is the regular build. No wipes needed. Just flash over previous.
NOTE: I am also building with LINARO 4.8 right now. Meaning, even more preformance increase in theory, but you guys will test and report.
Once i get enough feedback, then 4.8 will be our default toolchain going forward. (Until i test 4.9, that is )
@ ALL
I have locked the dev thread to keep my post fresh. Just post all questions here, I will reopen that thread soon, dont worry.
Regards
neXus PRIME
Click to expand...
Click to collapse
That still valid if I flash over build #3?? No wipe needed at all??
Hi! First of all I'm posting here because I'm unable to post in the direct discussion because I have no post at all. Sorry
I got a little problem on my nex and synapse! I'm following the guide from the Android L pv-79 Developer preview for Nexus 4 thread and I'm having this issue with Synapse. I've flashed the latest update 4.9(lot of 9s lol), the busybox, UKM and finally installed synapse which is not completely working. When some settings need to work on init.d it just says that there's a read only permission from UKM. I'm posting screen for reference.
How should I proceed in this? Thank you for your help!
Lampione said:
Hi! First of all I'm posting here because I'm unable to post in the direct discussion because I have no post at all. Sorry
I got a little problem on my nex and synapse! I'm following the guide from the Android L pv-79 Developer preview for Nexus 4 thread and I'm having this issue with Synapse. I've flashed the latest update 4.9(lot of 9s lol), the busybox, UKM and finally installed synapse which is not completely working. When some settings need to work on init.d it just says that there's a read only permission from UKM. I'm posting screen for reference.
How should I proceed in this? Thank you for your help!
Click to expand...
Click to collapse
Does the app ask for root permission?
Maybe the app is not compatible with the Android L kernel.
abaaaabbbb63 said:
Does the app ask for root permission?
Maybe the app is not compatible with the Android L kernel.
Click to expand...
Click to collapse
Yes it does. It also works for other settings like CPU frequency and gamma color of the screen. I haven't checked anything else so far. Thanks for your reply!
Lampione said:
Yes it does. It also works for other settings like CPU frequency and gamma color of the screen. I haven't checked anything else so far. Thanks for your reply!
Click to expand...
Click to collapse
You did use the flashable busybox here?
http://forum.xda-developers.com/showthread.php?t=1929852
abaaaabbbb63 said:
You did use the flashable busybox here?
http://forum.xda-developers.com/showthread.php?t=1929852
Click to expand...
Click to collapse
Yes I did it too. The phone was heating way too much however so I turned it stock to the 4.9 version. Thanks for your time!!
ukm
i got smiller errors i guess about init.d file
[Q&A] [10/21][ROM][N9005] XXUENF4 4.4.2 Odexed Multi CSC DPI, Ultimate V16-AOSP (AIO
Q&A for [10/21][ROM][N9005] XXUENF4 4.4.2 Odexed Multi CSC DPI, Ultimate V16-AOSP (AIO 171Mo)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [10/21][ROM][N9005] XXUENF4 4.4.2 Odexed Multi CSC DPI, Ultimate V16-AOSP (AIO 171Mo). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
quad core control
hi rayman
I am addicted to your roms especially v15 is best for me.
but I have a question. How can I disable cpu cores. I used terminal but didint work for me.
infermo said:
hi rayman
I am addicted to your roms especially v15 is best for me.
but I have a question. How can I disable cpu cores. I used terminal but didint work for me.
Click to expand...
Click to collapse
are you sure it's really efficient?????? maybe it's better to underclock the phone and you can do it with few apps....
maybe I remove some apps in V15 that I leave in V16.......what do you type in terminal?????I will try in V16
adb shell "echo 1 > /sys/devices/system/cpu/cpu1/online"
or
adb shell ->
# stop mpdecision
# echo 1 > /sys/devices/system/cpu/cpu1/online
yes enough for me two core or one core for chatting when wanna play game I can change it
I used two apk from store but doesnt work
quad core manager and something like that
but ultimate kernel with stweaks can to it with extreme battery profile
sorry, I have not tried yet because I'm playing with the tweaks of the last shinto kernel and specially undervolting and cpu max frequenz.....
you should try it.....synapse is included and you can control it.....
What a great rom! Stable as a rock. Thnx a lot! Only thing i find pitty is that i'm missing s-pen use (quick memo etc) Trying to use V19 is resulting in a boot loop. I'm using shinto-kernel. Could that be the problem?
Breedt said:
What a great rom! Stable as a rock. Thnx a lot! Only thing i find pitty is that i'm missing s-pen use (quick memo etc) Trying to use V19 is resulting in a boot loop. I'm using shinto-kernel. Could that be the problem?
Click to expand...
Click to collapse
have you try stock V19 install. i guarantee that there isn't any problems. I don't remember which lean it was but you must absolutly try the 3.7
rayman95 said:
have you try stock V19 install. i guarantee that there isn't any problems
Click to expand...
Click to collapse
No. Only found the v19 light version. Is there a link with stock V19?
Breedt said:
No. Only found the v19 light version. Is there a link with stock V19?
Click to expand...
Click to collapse
no there is only light version..but you can't install it or when installed with shinto you have bootloop???
rayman95 said:
no there is only light version..but you can't install it or when installed with shinto you have bootloop???
Click to expand...
Click to collapse
Okay, thnx. Thougt there was a full rom v19.
With shinto i'll ran in a bootloop.
But I'm gonna try it again. Thnx!
V 19 is running. Failure was probably due to shinto-kernel.
V24 with s-pen would be higly appreciated. (s-pen is nr 1 reason for me to buy the n9005)
Many thnx for the great work!
This is the best ROM I have used so far, its fluidity has no match, battery life is awesome and I got very large amount of unused ram.
I use Shinto kernel on it
Sent from my SM-N9005 using Tapatalk
If i flash lollypop version of this rom, can i go back to for example miui or kitkat ??
Sent from my SM-G900F using XDA Free mobile app
majidshahab091 said:
If i flash lollypop version of this rom, can i go back to for example miui or kitkat ??
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
if you doen't change pit file before with odin flashing, yes.........
Flashed the TWeak L light rom and it looks like the stock e-mail app is missing. Any chance you could post a flashable zip to recover it?
zertion said:
Flashed the TWeak L light rom and it looks like the stock e-mail app is missing. Any chance you could post a flashable zip to recover it?
Click to expand...
Click to collapse
copy the 2 folders and files in system/app and give permissions
https://www.dropbox.com/s/xjedachvgaxwnia/email.7z?dl=0
Hey man, just a quick question: If i have installed the V2 version and later on I decided to move to TW launcher and set DPI to 480 back, is it rom related that I can't put action memos as widgets? (the button is missing) and when I try to change the wallpaper with a builtin one it says app not found. Is this due to debloating or the fact that I used V2? If I just dirty flash the V1 will it work ok?
Thanks.
[
hi im andrei said:
Hey man, just a quick question: If i have installed the V2 version and later on I decided to move to TW launcher and set DPI to 480 back, is it rom related that I can't put action memos as widgets? (the button is missing) and when I try to change the wallpaper with a builtin one it says app not found. Is this due to debloating or the fact that I used V2? If I just dirty flash the V1 will it work ok?
Thanks.
Click to expand...
Click to collapse
for action memo it's normal, it's include in snote now.....and I have changed wallpaper without problems
Either I'm stupid or I can't find a way to make it as a widget.
i know it's integrated with the s note but still... isn't there supposed to be a button (like a pin ) to add it on the screen?
Also as for the builtin wallpapers I posted the picture below with the error but i think it's just the result of debloating
hi im andrei said:
Either I'm stupid or I can't find a way to make it as a widget.
i know it's integrated with the s note but still... isn't there supposed to be a button (like a pin ) to add it on the screen?
Also as for the builtin wallpapers I posted the picture below with the error but i think it's just the result of debloating
Click to expand...
Click to collapse
I'm with nova and he is no widget for action and I think it' same for TW....
for the wallpaper go in settings and lockscreen and open gallery and choose your image
and yes I remove an app for livewallpaper....
Anyone help me..
Which is the best custom ROM for yureka for multitasking and have good sound output.
Anyone plz help me...
awesumahti said:
Anyone help me..
Which is the best custom ROM for yureka for multitasking and have good sound output.
Anyone plz help me...
Click to expand...
Click to collapse
It's too soon for such a request.
But since you asked, Blisspop and Ressurection Remix are good. [5.1.x]
http://forum.xda-developers.com/yureka/development/rom-blisspop-v3-1-yureka-t3086740
http://forum.xda-developers.com/yureka/development/rom-resurrection-remix-t3089550
Personally I'm happy with a modified version of stock CM12S [5.0.2]
id74em8 said:
It's too soon for such a request.
But since you asked, Blisspop and Ressuraction Remix are good. [5.1.x]
http://forum.xda-developers.com/yureka/development/rom-blisspop-v3-1-yureka-t3086740
http://forum.xda-developers.com/yureka/development/rom-resurrection-remix-t3089550
Personally I'm happy with a modified version of stock CM12S [5.0.2]
Click to expand...
Click to collapse
Well currently I'm also using stock with some mods but the main issue is battery drain so which ROM can I use to reduce battery drain..
I got an increase in battery life an amazing one that is by doing the privacy guard thingy that is mentioned in the forum. You switch off wake up autostart and keep awake in advance options in the advance tab under privacy guard which is in the privacy tab and the battery increase was insane. Search the forum for a better tutorial. It will surely help
sunny765 said:
I got an increase in battery life an amazing one that is by doing the privacy guard thingy that is mentioned in the forum. You switch off wake up autostart and keep awake in advance options in the advance tab under privacy guard which is in the privacy tab and the battery increase was insane. Search the forum for a better tutorial. It will surely help
Click to expand...
Click to collapse
Already did it bro still battery draining..!
awesumahti said:
Well currently I'm also using stock with some mods but the main issue is battery drain so which ROM can I use to reduce battery drain..
Click to expand...
Click to collapse
1- Do a Dalvik cache wipe.
2- Flash a custom kernel. [I'd suggest Sandy 1.3 CPUQuiet build]
3- Keep governor at interactive>>runnable [this is the default, optimized for more battery] or interactive>>load_stats [this should improve performance at higher loads]
4- Enable MSM Thermal [this should fix the heating problem]
5- use Greenify 2.6+ with Xposed, if you're not using it already [this should help in hibernation]
6- Use Recently [this should stop the infamous memory leak Lollipop is known for]
7- Use Amplify for controlling all device wakelocks [this should help maintaining the CPU activity]
8- You can access PrivacyGuard and close the wake up and keep awake switches for all apps you think are necessary [this should reduce the CPU idle usage]
^Do all these and I don't think you need to worry about your battery at all.
Also, can you tell me which app uses most of your battery?
id74em8 said:
1- Do a Dalvik cache wipe.
2- Flash a custom kernel. [I'd suggest Sandy 1.3 CPUQuiet build]
3- Keep governor at interactive>>runnable [this is the default, optimized for more battery] or interactive>>load_stats [this should improve performance at higher loads]
4- Enable MSM Thermal [this should fix the heating problem]
5- use Greenify 2.6+ with Xposed, if you're not using it already [this should help in hibernation]
6- Use Recently [this should stop the infamous memory leak Lollipop is known for]
7- Use Amplify for controlling all device wakelocks [this should help maintaining the CPU activity]
8- You can access PrivacyGuard and close the wake up and keep awake switches for all apps you think are necessary [this should reduce the CPU idle usage]
^Do all these and I don't think you need to worry about your battery at all.
Also, can you tell me which app uses most of your battery?
Click to expand...
Click to collapse
Thanks mate but I have few queries :-
1. MSM thermal where it can be found..??
2. I don't have xposed so where to download it from..??
3. Google play services and Android system and media server the most battery eating apps..
awesumahti said:
Thanks mate but I have few queries :-
1. MSM thermal where it can be found..??
2. I don't have xposed so where to download it from..??
3. Google play services and Android system and media server the most battery eating apps..
Click to expand...
Click to collapse
1- MSM Thermal is actually a kernel feature. You may use Device Control to activate it.
1- Also you can use Temperature Throttle from TricksterMod.
2- Xposed for our device is a pain in the butt.
Try to find an xposed sdk21 arm64 zip. Normal arm builds won't work because we have an arm64 CPU. The zip is unstable though. Flash it and reboot.
Then find an apk file xposed 3 alpha 3
If you can't find them I will provide the links soon.
Then use the modules you want.
3- classic. The PrivacyGuard thing should help in this.
I'm being curious, but what kind of mods have you originally applied on your phone?
id74em8 said:
1- MSM Thermal is actually a kernel feature. You may use Device Control to activate it.
1- Also you can use Temperature Throttle from TricksterMod.
2- Xposed for our device is a pain in the butt.
Try to find an xposed sdk21 arm64 zip. Normal arm builds won't work because we have an arm64 CPU. The zip is unstable though. Flash it and reboot.
Then find an apk file xposed 5 alpha 3
If you can't find them I will provide the links soon.
Then use the modules you want.
3- classic. The PrivacyGuard thing should help in this.
I'm being curious, but what kind of mods have you originally applied on your phone?
Click to expand...
Click to collapse
Firstly Thanks mate
Now answer to your question first I used coolify app then I flashed xccelerate kernel then I flashed stock again but now I'm on Sandy..
And bro please provide me link for xposed app..
awesumahti said:
Firstly Thanks mate
Now answer to your question first I used coolify app then I flashed xccelerate kernel then I flashed stock again but now I'm on Sandy..
And bro please provide me link for xposed app..
Click to expand...
Click to collapse
framework zip:
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
USE THE sdk21 VERSION ONLY
apk:
http://forum.xda-developers.com/showthread.php?t=3034811
id74em8 said:
framework zip:
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
USE THE sdk21 VERSION ONLY
apk:
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Thanks mate..
id74em8 said:
framework zip:
http://forum.xda-developers.com/xposed/xposed-android-5-1-successfully-t3074586
USE THE sdk21 VERSION ONLY
apk:
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Mate this happened..
awesumahti said:
Mate this happened..
Click to expand...
Click to collapse
Yeah it's okay. The framework is active. The app is still in alpha stage for 5.0.x and upwards.You can now install/uninstall modules normally, but you can't reboot through Xposed.
Thanks bro..
id74em8 said:
Yeah it's okay. The framework is active. The app is still in alpha stage for 5.0.x and upwards.You can now install/uninstall modules normally, but you can't reboot through Xposed.
Click to expand...
Click to collapse
Greenify not working for me mate what to do..??
awesumahti said:
Greenify not working for me mate what to do..??
Click to expand...
Click to collapse
Which version are you using?
Use v2.6.2 beta 3
id74em8 said:
Which version are you using?
Use v2.6.2 beta 3
Click to expand...
Click to collapse
See this mate..
awesumahti said:
See this mate..
Click to expand...
Click to collapse
So, what do you mean it's not working?
What error(s) are you getting?
id74em8 said:
So, what do you mean it's not working?
What error(s) are you getting?
Click to expand...
Click to collapse
Whenever I tap the green zzz button to hibernate the apps a message pops out saying failed to put in hibernation like this -
Your warranty is now void, don't blame me if your phone blows up blahblahblah. Make sure to have latest TWRP.
BACKUP! Stock untouched boot.img is being flashed, so if you'd like color control, flash kernel below. Not a dev, just a hobby, enjoy.
ROM Info:
Only system and kernel are being flashed, no Modem, BL, etc.
Based off of 20F Complete zip from @autoprime.
*Pixel Black bootanimation.
*su.d support
*zipaligned
Flash in recovery, wipe cache and dalvik, Profit??????? :victory:
SuperSu and Busybox included. Only /system is wiped, data left alone.
Can dirty flash over current 20F or C or A (only C&A if you flashed complete 20F first) if you like.
Link: H830_20F_DeOdexed
MD5: f2b3a26c6374a389542aa11f157d519c
Credits: @Chainfire for supersu, / @autoprime for stock boot.img, / @jcadduono for TWRP, Original source and scripts used while compiling!!!, / @Tilde88 for taking the time to show me how to do this!, / @savoca for KCAL & app! and Thanks to @freeza for the updated KCAL.c source file. / Thanks to @f4bio, @onestyle007 and @Pphish20 for testing, / @Sultanxda, / @flar2 for ElementalX gov/Sound control/Vibration [email protected]#[email protected]#[email protected]#! , / @Eliminater74, / @WhyOrean, / @Tkkg1994 , / @eng.stk for his awesome blu_spark Kernel!, / @CrazyGamerGR, / @tbalden, / !!!!!!!!@franciscofranco !!!!!!!!, / @yarpiin, / @alucard_24, / @Lord Boeffla, / @xpirt, / @DespairFactor, / @archeart, / @neobuddy89, / @farovitus, / @arter97
....Someone else I'm sure I forgot.
It's people like them that make Android great!
Finally, thanks to Google/LG & XDA.
(Good starting point for color: **Check out this post from @marco_wack or All 3 colors at 256, Saturation 64, Value 127, Contrast 129.)
Asgard Kernel
*Based off of https://github.com/jcadduono/android_kernel_lge_msm8996 as original source.
*Compiled using [TOOLCHAIN]UBER Toolchains - v6.x
*Added Westwood as default TCP Congestion
*KCAL
*Disabled CRC check
*Battery improvements
*SELinux set to Permissive
*Added Gov's - alucard, bioshock, blu_active, conservativex, despair, electrodemand, elementalx, HYPER, intellidemand, intellimm, ironactive, lightning, lionfish, lionheart, nebula, nightmare, ondemand_x, pegasusq & wheatley.
*Added IO - bfq, fifo, fiops, sio, sioplus, tripndroid, vr & zen.
*Added TCP - A lot.
*Sound Control (Only Headphones)
*Adrenoboost (Default Off)
*Dynamic Fsync and Fsync Toggle
*Vibration Control
*Removed verifiedbootstate flag
*Replaced Interactive Gov with one from the OP3 (Removed Triton and Cancun)
*A lot of other changes throughout the kernel
Version 5.7 Changes & Links
Version 5.3 Changes & Links
Version 5.2 Changes & Links
Version 5.1 Changes & Links
Version 5 Changes & Links
Changes/Links v4.5
Link: Asgard_20C_v3
MD5: 27724e7a76a2375bb6bbf05faad70249
Link: Asgard_20C_v2.2
MD5: 71091d602233f85cbc4e674a7458110c
Link: 20CStock+Kernel -Just westwood and KCAL-
MD5: b6bd5ef016c3fe5d9a3f96aa2af32f92
-Changelog v3-
Source: (Asgard)-https://github.com/lordodin912/Asgard_H830_msm8996
(Stock+)-https://github.com/lordodin912/H830-20A-
Thanks again to @jcadduono for the original source and scripts used for compiling! https://github.com/jcadduono/android_kernel_lge_msm8996
Reserved
Just so I'm sure here. I'm currently on 20a deodexed with NSS kernel. To flash this, I need to flash 20c complete first, then this, then the NSS kernel?
Sent from my LG-H830 using Tapatalk
ledvedder said:
Just so I'm sure here. I'm currently on 20a deodexed with NSS kernel. To flash this, I need to flash 20c complete first, then this, then the NSS kernel?
Click to expand...
Click to collapse
Yup
New kernel, read OP.
What dies the Asgard kernel have and is it better than the NSS one? Thanks.
Edu616 said:
What dies the Asgard kernel have and is it better than the NSS one? Thanks.
Click to expand...
Click to collapse
Looks like NSS doesnt allow SafetyNet bypass and Asgard does? I am going to try Asgard.
An ultra lite version of this would be pretty cool.
Can we flash the kernels over the stock rom(rooted)?
pottyvick said:
Can we flash the kernels over the stock rom(rooted)?
Click to expand...
Click to collapse
Yea
I had issues with Bluetooth and the Asgard kernel (darkness governor). My connection would drop out every few minutes, only to be regained by turning Bluetooth off and back on. Switvhed back to NSS and the issue is gone. Thanks for the great work!
Mike_77 said:
I had issues with Bluetooth and the Asgard kernel (darkness governor). My connection would drop out every few minutes, only to be regained by turning Bluetooth off and back on. Switvhed back to NSS and the issue is gone. Thanks for the great work!
Click to expand...
Click to collapse
Not sure why, didn't touch anything related to Bluetooth. Bluetooth was fine the other day, had it on for over an hour, without any drops....Rebuilding the kernel from original source anyway.
Just curious if Safety Net (Android Pay, specifically) is working for others? I upgraded from 20A rooted via: 20C Complete, SuperSU, 20C DeOdexed, Asgard, Root Switch (tried with stop all daemons, too). For me, Android Pay fails the check. The only complication being I had Magisk installed the first time around. I'm wondering if it's worth backing up with Titanium and doing a factory reset to go thru the process again.
Asgard kernel update, read OP.
Which kernel and settings is everyone using? I'm looking for some recommendations.
Sent from my LG-H830 using Tapatalk
ledvedder said:
Which kernel and settings is everyone using? I'm looking for some recommendations.
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
+1
ledvedder said:
Which kernel and settings is everyone using? I'm looking for some recommendations.
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
tomarin said:
+1
Click to expand...
Click to collapse
Here's my battery (2nd charge cycle) with just stock deodexed and Asgard with elementalX.
Just web browsing, brightness ~50%, mobile data only. Battery left - 89%. Don't know the "best" settings yet, hope this helps though.
Anyone know if As hard 1.5 kernel will work on H38020a?
Sent from my LG-H830 using Tapatalk
Tinbender418 said:
Anyone know if As hard 1.5 kernel will work on H38020a?
Click to expand...
Click to collapse
It'll prolly work. Was going to make a separate one but don't see any reason to not upgrade to 20C, if your already on nougat.
Tried and lost root. Don't have a Windows PC, so kind of afraid to try flashing again.
Sent from my LG-H830 using Tapatalk