Related
Opening this thread for discussion and questions for Paranoid-neXus ROM by neXus PRIME upon his suggestion.
As a first query, I would like to ask how can I show battery percentage with the icon? Can't seem to find the option? And are there not any pie specific preferences to make 2 layers etc?
shahrukhqasim said:
Opening this thread for discussion and questions for Paranoid-neXus ROM by neXus PRIME upon his suggestion.
As a first query, I would like to ask how can I show battery percentage with the icon? Can't seem to find the option? And are there not any pie specific preferences to make 2 layers etc?
Click to expand...
Click to collapse
Go in settings, battery and click the first icon on top left that show you the option for battery icon
Cornhelius said:
Go in settings, battery and click the first icon on top left that show u the option for battery icon
Click to expand...
Click to collapse
Got it thanks! And what about options for pie controls? not present?
shahrukhqasim said:
Got it thanks! And what about options for pie controls? not present?
Click to expand...
Click to collapse
@all
Pie control doesn't have preference, you can start it with click the "immersive mode" tile
Reset preference: Go in settings, backup & restore, reset preference
Hover doesn't have preference, can start with click the second icon in the notification bar
Peek show the last notification if you move the device when the screen is off, start in Settings, Display, Peek notification
If I've forget something let me know
Cornhelius said:
@all
Pie control doesn't have preference, you can start it with click the "immersive mode" tile
Reset preference: Go in settings, backup & restore, reset preference
Hover doesn't have preference, can start with click the second icon in the notification bar
Peek show the last notification if you move the device when the screen is off, start in Settings, Display, Peek notification
If I've forget something let me know
Click to expand...
Click to collapse
Actually it had in SlimROM. Anyway, no matter. I didn't know about peek notification - going to check it. How much battery life are you getting?
I'm around 40 hours with medium usage. But I run build #3
Build # 4 is stable and base for future, new recoveries.
---------- Post added at 07:00 PM ---------- Previous post was at 06:56 PM ----------
Expected change log build #5
Source update
New busybox
Added reboot to recovery support from Rom - it didn't work earlier
theme chooser from cm11 stable branch
I'm thinking of adding a file manager in Rom because sometimes it is needed after clean reinstall.
Any suggestions guys???
neXus PRIME said:
...
I'm thinking of adding a file manager in Rom because sometimes it is needed after clean reinstall.
Any suggestions guys???
Click to expand...
Click to collapse
How about Root Browser?
File manager is first app what to need install.
MK99 said:
How about Root Browser?
File manager is first app what to need install.
Click to expand...
Click to collapse
I think CM-file manager is good (open source as well). Just this one app. I dont wanna bloat up.
neXus PRIME said:
I think CM-file manager is good (open source as well). Just this one app. I dont wanna bloat up.
Click to expand...
Click to collapse
It's great app also. It's fine.
neXus PRIME said:
I think CM-file manager is good (open source as well). Just this one app. I dont wanna bloat up.
Click to expand...
Click to collapse
+1
I'm now using build #3 and I've flash the new recovery posted by MrSteve..can I flash directly build #5 when it's ready??
@Cornhelius
Yes, you can flash #5 directly.
Is there any problem with gaming?? I installed "escape from rio" game and there were no levels are visible.... I had same problem "slimkat LBL' but there was no problem in cm11 nightly (my last rom used) but gaming performance is better on stock kernel based rom like slimkat LBL & paranoid LBL...
Sent from my C5303 using XDA Premium 4 mobile app
Build # 5
- CM File Manager
- Updated source, PA 4.4.1
- When you reboot to Recovery from Rom, its working now. Before, it was just normal reboot. Default Philz, otherwise according to key press.
Thanks MrSteve555
- Rear Mic Fixes, please test and report
Click to expand...
Click to collapse
DL Links:
LINK REMOVED> USE v4
This is the regular build. No wipes needed. Just flash over previous.
NOTE: I am also building with LINARO 4.8 right now. Meaning, even more preformance increase in theory, but you guys will test and report.
Once i get enough feedback, then 4.8 will be our default toolchain going forward. (Until i test 4.9, that is )
@ ALL
I have locked the dev thread to keep my post fresh. Just post all questions here, I will reopen that thread soon, dont worry.
Regards
neXus PRIME
neXus PRIME said:
Build # 5
rear mic is fixed? ill tested... but if this work.. cn it be updated to cm repo? soo it cn be fixed to all cm based? this really good news!!
Click to expand...
Click to collapse
@TO all
Just tested, any mic doesn't work... My patch didn't work very well...
To fix it you must change a line in build.prop:
persist.audio.handset.mic=digital
to
persist.audio.handset.mic=analog
Sorry for inconveinience.
I'll upload a fixed build soon, but until that comes, you will have to change that line in build.prop.
MrSteve555 said:
@TO all
Just tested, any mic doesn't work... My patch didn't work very well...
To fix it you must change a line in build.prop:
persist.audio.handset.mic=digital
to
persist.audio.handset.mic=analog
Sorry for inconveinience.
I'll upload a fixed build soon, but until that comes, you will have to change that line in build.prop.
Click to expand...
Click to collapse
Give me fixed build link. I have removed my upload.
neXus PRIME said:
Give me fixed build link. I have removed my upload.
Click to expand...
Click to collapse
Here's a link to the fixed build:
https://mega.co.nz/#!nUAxUZ7L!EFhvmmK_dgU1j-WohBji_diwEnemQH1CZlXeslWMxa4
Again, sorry for that issue. I didn't expect it to happen.
neXus PRIME said:
Build # 5
DL Links:
LINK REMOVED> USE v4
This is the regular build. No wipes needed. Just flash over previous.
NOTE: I am also building with LINARO 4.8 right now. Meaning, even more preformance increase in theory, but you guys will test and report.
Once i get enough feedback, then 4.8 will be our default toolchain going forward. (Until i test 4.9, that is )
@ ALL
I have locked the dev thread to keep my post fresh. Just post all questions here, I will reopen that thread soon, dont worry.
Regards
neXus PRIME
Click to expand...
Click to collapse
That still valid if I flash over build #3?? No wipe needed at all??
It would seem that the RRO layers themes do work on the Marshmallow stock ROM. After hearing about Marshmallow supporting it by default, i decided to see if it actually works on the Stock Marshmallow ROM. As far as I can tell, the only thing that doesn't work for me is the soft reboot after selecting the desired layer and applying it. :victory:
Update - If after uninstalling certain layers, the theme doesn't change back to normal, then using a file explorer, go to system/vendor/overlays and delete all the contents in the folder.
Will this work in moto g turbo too running marshmallow?
I read a post in x play page that using two themes same time results in bootloop
Wani Aamir said:
Will this work in moto g turbo too running marshmallow?
I read a post in x play page that using two themes same time results in bootloop
Click to expand...
Click to collapse
I do not know.. It should work.. But you might want to make a backup of your rom and data in recovery before applying a layers theme.
Wani Aamir said:
Will this work in moto g turbo too running marshmallow?
I read a post in x play page that using two themes same time results in bootloop
Click to expand...
Click to collapse
This has always been an issue with RRO, if you apply some things that overlap what they do. Not exclusive to Moto X or any device, in the right combination it will bootloop, but you should be able to boot into safe mode, or via the TWRP file manager, and remove the offending APK's from /system/vendor/overlay, and reboot and the phone will be happy again.
Of course you can always backup and restore a nandroid, but layers was designed so this shouldn't ever be necessary.
Make a tutorial mate.
damianx5 said:
It would seem that the RRO layers themes do work on the Marshmallow stock ROM. After hearing about Marshmallow supporting it by default, i decided to see if it actually works on the Stock Marshmallow ROM. As far as I can tell, the only thing that doesn't work for me is the soft reboot after selecting the desired layer and applying it. :victory:
Update - If after uninstalling certain layers, the theme doesn't change back to normal, then using a file explorer, go to system/vendor/overlays and delete all the contents in the folder.
Click to expand...
Click to collapse
Make a tutorial mate
prasi.ram10 said:
Make a tutorial mate
Click to expand...
Click to collapse
Lol... Tutorial? All you need is root and Layers Manager app, it doesn't get much simpler.
Sent from my MotoG3 using Tapatalk
Hahaha
acejavelin said:
Lol... Tutorial? All you need is root and Layers Manager app, it doesn't get much simpler.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
I was dumb enough to ask. ?
prasi.ram10 said:
I was dumb enough to ask.
Click to expand...
Click to collapse
Yes and no... if you know nothing about layers my answer was a bit sarcastic, but the tutorial would be that... root and use Layers Manager app from the Play Store.
If you have more questions on Layers see: http://forum.xda-developers.com/android/apps-games/official-layers-bitsyko-apps-rro-t3012172
Thanks
Uh
acejavelin said:
Yes and no... if you know nothing about layers my answer was a bit sarcastic, but the tutorial would be that... root and use Layers Manager app from the Play Store.
If you have more questions on Layers see: http://forum.xda-developers.com/android/apps-games/official-layers-bitsyko-apps-rro-t3012172
Click to expand...
Click to collapse
I'm not new to the rooting community. I'm only new to RRO. I've tried it on my old phone and i ended up crashing everything on my phone.. (Not moto) it was an asus zenfone. Since then i haven't tried layers. Given the fact that mm is supporting rro layers natively has piqued my interest for it, so was inquisitive abt it. Thanks mate.
acejavelin said:
Yes and no... if you know nothing about layers my answer was a bit sarcastic, but the tutorial would be that... root and use Layers Manager app from the Play Store.
If you have more questions on Layers see: http://forum.xda-developers.com/android/apps-games/official-layers-bitsyko-apps-rro-t3012172
Click to expand...
Click to collapse
One question. Is it necessary to set up busybox on rails for the layers manager to work?
is RRO working fine??
Jerryxl said:
is RRO working fine??
Click to expand...
Click to collapse
Yeah no problem. It's working fine.
Rro
Working fine.
Inversion UI
prasi.ram10 said:
Working fine.
Inversion UI
Click to expand...
Click to collapse
hi,
i seem to have some problems applying the layers. after reboot nothing changes. I can't see any error message in the manager app. this is my first time with RRO, can someone help me?
thanks in advance.
itfranky1 said:
hi,
i seem to have some problems applying the layers. after reboot nothing changes. I can't see any error message in the manager app. this is my first time with RRO, can someone help me?
thanks in advance.
Click to expand...
Click to collapse
Check BusyBox installed correctly or not....
Sent from my Toilet using Moto G3....
Busybox on rails
itfranky1 said:
hi,
i seem to have some problems applying the layers. after reboot nothing changes. I can't see any error message in the manager app. this is my first time with RRO, can someone help me?
thanks in advance.
Click to expand...
Click to collapse
Installed busy box on rails?
itfranky1 said:
hi,
i seem to have some problems applying the layers. after reboot nothing changes. I can't see any error message in the manager app. this is my first time with RRO, can someone help me?
thanks in advance.
Click to expand...
Click to collapse
you need to install busy box binaries in "system/xbin" otherwise it won't work
creative21 said:
you need to install busy box binaries in "system/xbin" otherwise it won't work
Click to expand...
Click to collapse
I have busybox installed. I think the problem is that can't reboot correctly. When I reboot it seems it always does a softboot. The notifications remain, the recent apps too. Also some tweaks I made on gravity box (MM) that require reboot aren't applied.
By the way, sorry for my English, I'm Italian.
itfranky1 said:
I have busybox installed. I think the problem is that can't reboot correctly. When I reboot it seems it always does a softboot. The notifications remain, the recent apps too. Also some tweaks I made on gravity box (MM) that require reboot aren't applied.
By the way, sorry for my English, I'm Italian.
Click to expand...
Click to collapse
i also had the same problem because i installed busybox in "system/bin" but after installing busybox in "system/xbin" layers are working perfectly. I'm also using xposed & gravitybox.
It worked! Thank you! I didn't read correctly the first time (missed that "x"). The Gravity Box problem is still there (as expected) but i don't think this is the right place in the forums to talk about that. I hope to find a solution soon
Can't seem to get the v4a driver to install correctly. Followed a few different tutorials for installing on marshmallow but none have worked. I have the latest busybox installed and SE Linux set to permissive. Any help or advice is appreciated. Running PureNexus 05/06 build.
metalfangs said:
Can't seem to get the v4a driver to install correctly. Followed a few different tutorials for installing on marshmallow but none have worked. I have the latest busybox installed and SE Linux set to permissive. Any help or advice is appreciated. Running PureNexus 05/06 build.
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
dwertz said:
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
Click to expand...
Click to collapse
I knew something like this had to exist. Thank you.
This is actually the latest thread for that mod, and it works great on PureNexus http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
SeVIIn said:
This is actually the latest thread for that mod, and it works great on PureNexus http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
Interesting this is the first I've heard of this mod, looks great I will try it out for sure.
I had the same problem.
You have to first install the v4a for systemlessroot v3 (final), and after that, install the latest v4a apk and
simply install that one and install the driver. by doing so it will stick, also after a reboot
The second post is what I use as well. You don't even have to worry about installing the driver since it's ready to go after flashing.
Sent from my Nexus 6P using Tapatalk
I wonder would this still work on the 3rd N preview?
The A.R.I.S.E Sound System (silly name, I know) actually has a version specifically for N. I've been using it and it works great.
Curiousn00b said:
The second post is what I use as well. You don't even have to worry about installing the driver since it's ready to go after flashing.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Which post are you referring to here?
Set selinux to permissive (download the apk after googling), open file explorer, go to system/vendor/etc and rename the folder audio_effects.conf to audio_effects.conf.bak and save. exit es explorer and reboot, go to viper and check drivers, it should now say neon enabled. worked for me!
dharish said:
Which post are you referring to here?
Click to expand...
Click to collapse
The second post of this thread
The V4A in the Nexus 6 thread works on both Permissive and Enforcing. The driver is also installed already upon flashing the zip. Ready to go from the start. [emoji14]
Sent from my Nexus 6P using Tapatalk
Curiousn00b said:
The second post of this thread
The V4A in the Nexus 6 thread works on both Permissive and Enforcing. The driver is also installed already upon flashing the zip. Ready to go from the start. [emoji14]
Click to expand...
Click to collapse
Great will try.. which one u have installed? Atmos? DD seems to require permissive..
dharish said:
Great will try.. which one u have installed? Atmos? DD seems to require permissive..
Click to expand...
Click to collapse
I'm running the Sony Beats V4A one. Dolby/Atmos aren't needed when you have ViPER. It's just another app/equalizer, but both work good together. Dolby(I believe it was) has this nice feature called ' Volume Leveler ' or something. It made everything loud at the lowest level.
Sent from my Nexus 6P using Tapatalk
The first builds of Lineage are out for the shamu finally!
download.lineageos.org
How do I get rid of the ugly watermark across my screen?
The link to the nightly version doesn't work
Link to nightly worked fine for me. Haven't flashed yet, but it downloaded, albeit slowly.
https://download.lineageos.org/shamu
How to remove this cm to lineage migration build background ?
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
You're supposed to flash nightly over experimental. Just read the instructions...
Dopamin3 said:
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
Click to expand...
Click to collapse
can confirm - no watermark at nightly building!
Strange how everytime I try to download the nightly it fails. No matter what browser I use
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
coremania said:
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
Click to expand...
Click to collapse
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works without any trouble ...
MartinN6 said:
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works witout any trouble ...
Click to expand...
Click to collapse
Good, if it works that easy, but there was something about the cleaner, don't remember right now exactly, but it breaks something. May it was dolby.
Edit: using the cleaner always kills cast connection, that's why I didn't use it anymore
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Is there an updater built in or do we flash all updates? Reading in other threads that ppl get a update notification when a new build is available. I'm on experimental cuz the nightly link didn't work when I tried last night
Dopamin3 said:
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Click to expand...
Click to collapse
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
MartinN6 said:
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Click to expand...
Click to collapse
How did you get those SOFT keys from. Pixel
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
sorry I don´t understand what you mean with "SOFT keys" ?
Edit: Aah now I know!
Yes, it's from the mod - link next post! ->
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
https://forum.xda-developers.com/nexus-6/themes-apps/cool-pixel-mod-android-7-1-1-t3532951
Here you go
---------- Post added at 19:57 ---------- Previous post was at 19:54 ----------
LeroViten said:
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
Click to expand...
Click to collapse
Latest
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Hi everybody,
I want to show you how to install Viper4android on your phone running developer preview 3 or later with Android O.
IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE!!
First download the zip from Androidfilehost or from below.
Zip
https://www.androidfilehost.com/?fid=673368273298967857
Busybox
https://www.androidfilehost.com/?fid=961840155545578665
Extract it to any folder, you will have two files now, a Viper4android App and a flashable Viper4android zip.
Reboot into recovery and install the zip, I also recommend a custom kernel like the Jolla Kernel which already has Android O support for loudness control (for my Nexus 5X).
Boot normally install BusyBox and launch Viper4android.
Select install drivers, grant root permission and wait until it is installed.
If a IO Error occurrs don't worry it'll work anyway.
Reboot and open any file manager.
Delete the Viper4android folder in "/system/priv-app".
Delete "/system/vendor/etc/audio_effects".
Install Viper4android app you downloaded before.
Reboot once again and open Viper4android - driver are working now.
Tested on my Nexus 5X with Android 8 developer preview 3.
Leave a like if it helped.
Reserved
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
vijaygogawale said:
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
Click to expand...
Click to collapse
Ok
Done Androidfilehost link is uodated
Thargorsson said:
Ok
Done Androidfilehost link is uodated
Click to expand...
Click to collapse
App installed.. but busy box not installed.. error
vijaygogawale said:
App installed.. but busy box not installed.. error
Click to expand...
Click to collapse
Which device do you have and which Android kernel, android version etc... I need Basic information.
Thargorsson said:
Which device do you have and which Android kernel, android version etc... I need Basic information.
Click to expand...
Click to collapse
Device Angler,
Kernel Stock,
Android 8 DP3,
vijaygogawale said:
Device Angler,
Kernel Stock,
Android 8 DP3,
Click to expand...
Click to collapse
Systemless root?
And which supersu
Thargorsson said:
Systemless root?
And which supersu
Click to expand...
Click to collapse
Magisk v13,
vijaygogawale said:
Magisk v13,
Click to expand...
Click to collapse
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Thargorsson said:
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Click to expand...
Click to collapse
Will try and report back
vijaygogawale said:
Will try and report back
Click to expand...
Click to collapse
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Thargorsson said:
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Click to expand...
Click to collapse
Working now, phonograph not supported.
vijaygogawale said:
Working now, phonograph not supported.
Click to expand...
Click to collapse
Cool
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
jbirdyRazr said:
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
Click to expand...
Click to collapse
Hows the exact process you wen through?
I have not implemented yet. Was wondering if anybody else had. Now using SuperSu 2.82-SR5 and TWRP 3.1.1.0. Now that TRWP works now without having to fastboot, I will try this mod. If I get it working I will let you know.
Ah k
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
snehgada said:
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
Click to expand...
Click to collapse
Which device, Rom and kernel? And also which music player are you using? Also try enabke developer options in Viper and select disable selinux and/or enable FX compatibility mode.