Hello friends, i have got this Android stick its been bricked by someone, and stuck on LOGO SCREEN.
the specs are:-
Android 4.1
Rockchip RK3066 Cortex A9 Dual Core
1GB RAM
8GB Built In Memory
THANKS.
You can try to reflash with firmware of another brand, but you have 50% that wifi will start working. Depends on definite firmware. If wifi and chipset for both devices are the same you can do this. Did you try to contact producer directly?
Such_A_Victor said:
You can try to reflash with firmware of another brand, but you have 50% that wifi will start working. Depends on definite firmware. If wifi and chipset for both devices are the same you can do this. Did you try to contact producer directly?
Click to expand...
Click to collapse
Yes victor i tried different roms , but nothing seem to work, now there is only black blank sceen, i even tried erasing flash and idb reset in mask rom mode and upload all the three FW's but no luck, no menu or boot screen on the tv. The producer is not intereted in any kind of support.
Ruhanin said:
Yes victor i tried different roms like UG802, MK808, even Finlesss 1.7, but nothing seem to work, now there is only black blank sceen, i even tried erasing flash and idb reset in mask rom mode and upload all the three FW's but no luck, no menu or boot screen on the tv. The producer is not intereted in any kind of support.
Click to expand...
Click to collapse
Can you show this device, and logo screen if it's still able?
Related
Hello developers,
I am not really new here, but more a reader than a writer. But this time I need your help.
I have tried to flash a Chinese I9500 clone (mtk6589), with an chinese recovery and without a download mode.
After i tried with MtkDroidtools, neither have a download mode, recovery mode or rom.
After turning on the phone it keeps rebooting after showing the I9500 logo. Even if i connect it to the computer.
The real problem is: I can't make a stable connection with the computer to flash a new image.
Is there another option or did i really bricked this one?
skiawolf said:
Hello developers,
I am not really new here, but more a reader than a writer. But this time I need your help.
I have tried to flash a Chinese I9500 clone (mtk6589), with an chinese recovery and without a download mode.
After i tried with MtkDroidtools, neither have a download mode, recovery mode or rom.
After turning on the phone it keeps rebooting after showing the I9500 logo. Even if i connect it to the computer.
The real problem is: I can't make a stable connection with the computer to flash a new image.
Is there another option or did i really bricked this one?
Click to expand...
Click to collapse
only thing i could suggest is try finding , the software designed for flashing that device, maybe try contacting the actual manufacturer.
you may be waiting some time as clones arent supported here on xda
andy1weir said:
only thing i could suggest is try finding , the software designed for flashing that device, maybe try contacting the actual manufacturer.
you may be waiting some time as clones arent supported here on xda
Click to expand...
Click to collapse
Thnx for your reply, but even if i have the right software. The phone keeps restarting,
so i have to stop the rebooting, otherwise the computer won't recognize the phone.
You get what you pay for.
#Fixed
This will sound implausible but:
I deleted the battery, installed the last usb driver en used the hard reset combination. So the rebooting stopped.
after that, I followed the tutorial called "How To use SP Flash Tool For China Mobile Phones - HDC Legend S4 [HD]" (on youtube) and its done.
I had this problem for months and now this solution finally worked for me.
Hello, I have bought Jiayu S3 recently, for those who don't know, it is a phone featuring mediatek mtk6752. It was all good but I decided to restore factory settings and phone seems to be bricked. I have watched many tutorials and read guides but nothing helps. My phone blinks with android logo continuosly, once per few seconds it displays android with red exclamation mark inside of his body. I have tried to do recovery but phone only resets showing Jiayu logo or turns off completely. Obviously I have tried to flash stock rom but my phone is not recognized by the PC, and no held buttons combination helps. It does recognize it with the battery in but I can't flash with it in, right? I have tried removing mediatek usb drivers, redownloading them, flashing stock rom by different programs, but the phone is just not recognized. I have read something about hard reset (which includes working with the hardware) but I hope there is another non invasive solution.
HooCairs said:
Hello, I have bought Jiayu S3 recently, for those who don't know, it is a phone featuring mediatek mtk6752. It was all good but I decided to restore factory settings and phone seems to be bricked. I have watched many tutorials and read guides but nothing helps. My phone blinks with android logo continuosly, once per few seconds it displays android with red exclamation mark inside of his body. I have tried to do recovery but phone only resets showing Jiayu logo or turns off completely. Obviously I have tried to flash stock rom but my phone is not recognized by the PC, and no held buttons combination helps. It does recognize it with the battery in but I can't flash with it in, right? I have tried removing mediatek usb drivers, redownloading them, flashing stock rom by different programs, but the phone is just not recognized. I have read something about hard reset (which includes working with the hardware) but I hope there is another non invasive solution.
Click to expand...
Click to collapse
Does you've fixed this issues?
are you using windows 8 ? if you are u need to set the windows to allow unsigned drivers and install the mtk drivers. Then using spflashtool flash your new rom
all the files and the tutorial are available @ needrom.com under "S3S (Advanced)" by sorix
Hi guys
I have installed custom Android ROM 7.0(screwd) for my phone but now turns on shows logo google and reboots work only with bootloader fastboot, I want to recover data, but do not know how to do msmtool? how to work? I want to work again my phone, help me please
P.s:the problem I have since I connected TV with your phone, be rebooted several times and this not work
Emmc32gb Toshiba
msm8994
wonderdroid87 said:
Hi guys
I have installed custom Android ROM 7.0(screwd) for my phone but now turns on shows logo google and reboots work only with bootloader fastboot, I want to recover data, but do not know how to do msmtool? how to work? I want to work again my phone, help me please
P.s:the problem I have since I connected TV with your phone, be rebooted several times and this not work
Emmc32gb Toshiba
msm8994
Click to expand...
Click to collapse
I had the same issue ended up having to RMA it back to Huawei is my understanding that the chip fried there is no way to bring it back to life. You can try reverting to stock anything you can think of probably won't work so start the RMA process now takes about 3 weeks
I'm flashing my new Lenovo tablet with Android 9 (so I can flash it later with Ubuntu Touch) and after SP Flash tool finished flashing
tablet won't power on. The power button does nothing and holding volume down + power button does nothing either.
The battery isn't dead so I'm trying to figure out why the tablet won't come on if older ROM is on it.
I had no error outputs during the flash.
This is the ROM I flashed https://mirrors.lolinet.com/firmwar..._Gen/TB-X606F/TB-X606F_S300007_200923_BMP.zip
Any suggestion as to how to get it to work again ?
I don't think you can downgrade these. You may need to completely wipe and reinstall the ROM.
ldeveraux said:
I don't think you can downgrade these. You may need to completely wipe and reinstall the ROM.
Click to expand...
Click to collapse
I'm using the official Lenovo's Rescue Tool but it's not helping. The tool isn't detecting the device after holding volume up + connecting.
python_rocks said:
I'm using the official Lenovo's Rescue Tool but it's not helping. The tool isn't detecting the device after holding volume up + connecting.
Click to expand...
Click to collapse
assuming windows, check that your drivers are detecting the recovery module
ldeveraux said:
assuming windows, check that your drivers are detecting the recovery module
Click to expand...
Click to collapse
Yes I'm using W10. adb is working and I've got Lenovo USB drivers installed too. What do you mean by "recovery module" ? Recovery partition inside the tablet ?
python_rocks said:
I'm flashing my new Lenovo tablet with Android 9 (so I can flash it later with Ubuntu Touch)...
Click to expand...
Click to collapse
Cool. Are you doing a Halium port for this device?
Yahoo Mike said:
Cool. Are you doing a Halium port for this device?
Click to expand...
Click to collapse
I'm not a Halium dev but I'm trying to flash the device. Me and another member of the community have our tablets dead after flushing it with supposedly Android 9 ROM. Not even Lenovo's Rescue Tool is helping now.
python_rocks said:
Yes I'm using W10. adb is working and I've got Lenovo USB drivers installed too. What do you mean by "recovery module" ? Recovery partition inside the tablet ?
Click to expand...
Click to collapse
No i mean when you connect the tablet to the pc in recovery, open Device Manager and ensure the tablet is connected with the correct driver. I'm sorry i don't know what that is offhand, but it should be different than when you connect it if the tablet was working. Sorry if it makes no sense, but i think this is what's going on.
ldeveraux said:
No i mean when you connect the tablet to the pc in recovery, open Device Manager and ensure the tablet is connected with the correct driver. I'm sorry i don't know what that is offhand, but it should be different than when you connect it if the tablet was working. Sorry if it makes no sense, but i think this is what's going on.
Click to expand...
Click to collapse
In my case there's no "connect the tablet to the PC in recovery". The tablet won't power on at all. Can't invoke fastboot nor recovery. The tablet doesn't react to any presses. Or press and holds. No nothing. The only thing I can confirm is the red LED on when the tablet is on charger.
Window's device manager is recognizing MediaTek USB driver when plugged in but that's it.
I've ran out of ideas about how to restore it hence I'm posting here.
python_rocks said:
In my case there's no "connect the tablet to the PC in recovery". The tablet won't power on at all. Can't invoke fastboot nor recovery. The tablet doesn't react to any presses. Or press and holds. No nothing. The only thing I can confirm is the red LED on when the tablet is on charger.
Window's device manager is recognizing MediaTek USB driver when plugged in but that's it.
I've ran out of ideas about how to restore it hence I'm posting here.
Click to expand...
Click to collapse
Oh i misunderstood completely! That is worse, i have no clue how to fix it...
python_rocks said:
The tablet won't power on at all.
Click to expand...
Click to collapse
If it's that dead, then it sounds like the preloader.bin is trashed.
Try this method.
There is also an older thread for older SOCs that might have some hints.
Otherwise, you might have to open up the tablet.
You could research and try the "test point" method. It involves shorting two points on the motherboard. I did something similar for the X605F (which has a QCom SOC).
I'm not sure where the test points on this tablet are. Some MTK devices don't have test points. Google "mediatek test point" for starters. If you can't find them, then maybe ask Lenovo where they are. If you find out, post a photo of the test points on here.
If you're not confident doing any of this, then send the tablet to Lenovo for repair.
Yahoo Mike said:
If it's that dead, then it sounds like the preloader.bin is trashed.
Try this method.
There is also an older thread for older SOCs that might have some hints.
Otherwise, you might have to open up the tablet.
You could research and try the "test point" method. It involves shorting two points on the motherboard. I did something similar for the X605F (which has a QCom SOC).
I'm not sure where the test points on this tablet are. Some MTK devices don't have test points. Google "mediatek test point" for starters. If you can't find them, then maybe ask Lenovo where they are. If you find out, post a photo of the test points on here.
If you're not confident doing any of this, then send the tablet to Lenovo for repair.
Click to expand...
Click to collapse
Yeah, I've ordered opening kit. I'm going in. Quite a few people got their devices working by disconnecting the battery and connecting it back. I've noticed that no matter how long the
tablet is on charger the LED stays red, it doesn't change to orange or green.
This same problem has happen to two more members of the community. Same tablet.
We had to flag that ROM as it bricks the tablet.
python_rocks said:
We had to flag that ROM as it bricks the tablet.
Click to expand...
Click to collapse
I don't have a lot of experience with the SPF tool, but could the root-cause of your problem be that you need to use a different dropdown option? See the description of the options in the unbrick guide - specifically the firmware upgrade option.
It makes sense that you want to force a full flash of low-level firmware when changing Android versions. That option seems to do exactly that.
Android 9 OS is not going to play nice with low-level firmware written for Android 10.
There might be nothing wrong with the ROM ??? ...just an idle thought.
Yahoo Mike said:
I don't have a lot of experience with the SPF tool, but could the root-cause of your problem be that you need to use a different dropdown option? See the description of the options in the unbrick guide - specifically the firmware upgrade option.
It makes sense that you want to force a full flash of low-level firmware when changing Android versions. That option seems to do exactly that.
Android 9 OS is not going to play nice with low-level firmware written for Android 10.
There might be nothing wrong with the ROM ??? ...just an idle thought.
Click to expand...
Click to collapse
Thank you for trying to help.
The flash tool doesn't do anything when I click Download and plugging in the tablet while holding the volume down button. Dropdown option was set to "firmware upgrade" as advised.
The guide suggests that it's for people who can at least power on the device. It says "switch off the phone ..." which I don't need to do since I can't even switch it on
python_rocks said:
I'm flashing my new Lenovo tablet with Android 9 (so I can flash it later with Ubuntu Touch) and after SP Flash tool finished flashing
tablet won't power on. The power button does nothing and holding volume down + power button does nothing either.
The battery isn't dead so I'm trying to figure out why the tablet won't come on if older ROM is on it.
I had no error outputs during the flash.
This is the ROM I flashed https://mirrors.lolinet.com/firmwar..._Gen/TB-X606F/TB-X606F_S300007_200923_BMP.zip
Any suggestion as to how to get it to work again
Click to expand...
Click to collapse
Did you mange to fix it?
A. Alaska said:
Did you mange to fix it?
Click to expand...
Click to collapse
You need to use a rework station heat gun or maybe a hair blow dryer might work to heat the sides of the screen to remove it.
I recommend cutting a water bottle in a square or rectangle shape then using the corner to slowly pry the screen off. After that remove the battery ribbon and hold the power bottom for 20-60 seconds to fully drain the charge.
Then recconect it and turn it on 100 percent works.
Just remember you must have the flash tool app and firmware ready in upgrade or download mode while holding down vol. It will reflash the tablet and bam will unbrick.
Just to note down my experiences here as well. I now also got into the same trouble. I tried
TB-X606F_S100015_191127_BMP.zip and also TB-X606F_S300091_201215_BMP.zip
It turns out that with these two you cannot start up the device anymore. Just as the thread-creator described. In my case pluging out and in again seems to give the SP FalshTool the chance to flash again (put it in "Download"-Mode before). So the latest firmware by today - TB-X606F_S300429_21110_BMP.zip - helped me to revive it again.
For me this is nice, but I also wanted to put Ubuntu touch on it just as described here: https://gitlab.com/ubports/community-ports/android9/lenovo-tab-m10-fhd-plus/lenovo-x606 ... unfortunately I am blocked now due to not being able to bring Android 9 on it. btw: There is no proposal on the site which firmware-version is even Android 9. I just guessed from the date.
Hi Folks,
I'm having RK3288 Board it was working fine until I decided to do an OS upgrade. Accidentally ROM didn't install correctly and now the device is nearly bricked.
I'm searching the web for the past 2 months to try any method which can help me to return the board to a working state.
The issue I tried to Install a new untested ROM over a working ROM and the device isn't booting UP, whenever I'm trying to boot nothing happens also RK Android Tool isn't able to detect the device. The issue is pretty big as I'm left with more than 20 unused boards.
Could you please suggest how to enter eMMC or EDL mode? Attaching a Snap of my Board.
HI ,
you can short the Pins 7/8 , right side , count from triangle in IMG .....402.jpg , for more Infos search on Freaktab ,
greetings / gefattern
Hi,
i have a similar Problem with a rk3288 based Chip.
I tried to do a firmware update, but it ends with an error. Now the RKDevTool only shows "No Devices found".
Can anybody give me a hint, how to solve this? The board seems to be powered, because the Power LED lights green.
Please look a the photo attached
thank you very much
A128/A139 said:
Hi,
i have a similar Problem with a rk3288 based Chip.
I tried to do a firmware update, but it ends with an error. Now the RKDevTool only shows "No Devices found".
Can anybody give me a hint, how to solve this? The board seems to be powered, because the Power LED lights green.
Please look a the photo attached
thank you very much
Click to expand...
Click to collapse
Please share pic from the back of the port also. don't attach PDF file make it JPG
dbzdivik said:
Please share pic from the back of the port also. don't attach PDF file make it JPG
Click to expand...
Click to collapse
Hi,
here are the pics. Many thanks
Has nobody any idea?