Hi guys
I have installed custom Android ROM 7.0(screwd) for my phone but now turns on shows logo google and reboots work only with bootloader fastboot, I want to recover data, but do not know how to do msmtool? how to work? I want to work again my phone, help me please
P.s:the problem I have since I connected TV with your phone, be rebooted several times and this not work
Emmc32gb Toshiba
msm8994
wonderdroid87 said:
Hi guys
I have installed custom Android ROM 7.0(screwd) for my phone but now turns on shows logo google and reboots work only with bootloader fastboot, I want to recover data, but do not know how to do msmtool? how to work? I want to work again my phone, help me please
P.s:the problem I have since I connected TV with your phone, be rebooted several times and this not work
Emmc32gb Toshiba
msm8994
Click to expand...
Click to collapse
I had the same issue ended up having to RMA it back to Huawei is my understanding that the chip fried there is no way to bring it back to life. You can try reverting to stock anything you can think of probably won't work so start the RMA process now takes about 3 weeks
Related
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
Hi
2 day ago my girlfriend was left tegra note at night, In morning I was put it to charger.
I was turn on and stuck on boot logo - NVidia circle is running around non stop and dry battery.
I run recovery mode and try choose any option but nothing is going to next step.
How can I recover her tablet and try do not delete her data?
Please help!!! I new in android, I don't have any problem with flashing and etc.
Done with Symbian, windows phone and ios but that is my first time with android.
Best regars
REVIVE
You can try to use the toolkit in this link http://forum.xda-developers.com/showthread.php?t=2627654. If that doesn't work you'll have to RMA it for a replacement.
perez6991 said:
You can try to use the toolkit in this link http://forum.xda-developers.com/showthread.php?t=2627654. If that doesn't work you'll have to RMA it for a replacement.
Click to expand...
Click to collapse
I read that already, but I cant turn on noting in tablet because is stuck, is any software for windows for flash tablet like that?
I run bootloader but recovery kernel option saying no command.
Ok I bought this tablet on 4/7/2014 then yesterday which was 4/8/2014 it bricked on me and it wont power on or charge i tried taking the battery out then replacing it that didnt work next i tried the volume combinations that didnt work either i ran fast boot via pc didnt even picked up the tablet my guess is that either the file structure or NAND went bad and i need to fix that so i can use it again if you know a way to get this tablet working then please tell me also i tried many android toolkits none worked im guessing i need to fix the NAND but dont know how if you can help i would really appreciate it oh btw i was running stock 4.4.2 and had an unlocked bootloader at the time its like my tablet is completely empty.
If you only had it one day is RMA an option? Otherwise your looking at a new motherboard. Does anything happen when you plug it into a PC any noise or connection? Usually corrupted nand will turn on but will bootloop and any attempt to flash will fail. You may be stuck in apx mode with a corrupted bootloader but either way it sounds like your up a creek.
Sent from my C5303 using xda app-developers app
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
easyxx said:
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
Click to expand...
Click to collapse
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
kophyo07 said:
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
Click to expand...
Click to collapse
If your phone displays Downloading... and fastboot keeps saying waiting for device then there is something wrong with the installed ADB driver. Check some of the posts in this forum like this one on how to fix this. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797/post69311402#post69311402
Strange that you had an OTA (Over The Air update). You didn't do anything between the SIM/Google registration and OTA ?
Normally there are no OTAs allowed on yd206 phones bought from China/HK , where did you buy it ? Chinese retailers have their own firmware that they put on phones , for me , maybe you had bad firmware installed.
The warranty of your phone is voided if you flash yotaphones bought from China and HK .
When you use yotaflasher do you get error message or "waiting for device" ?
To flash the Yotaphone , it should be in developer mode , but you couldn't put it in this mode because it first did the OTA that started your bootloop. Android apps are updated like that ("installing x of 127") when it gets updated to lollipop. Normally the OTA should have worked OK. Did you allow enough time at the Yotaphone logo after the first reboot ? It stays on this logo for 5 minutes before starting. I made this mistake.
The OTA started just after you set up Google etc ?
If so, normal yotaflashing will never work, but at least you havent broken the warranty . The thing we need to know is what exactly happened when you tried to flash , what errors messages appeared ?
If you did not put the phone in developer mode, then you cannot easily flash the phone, so your best possibility is to return the phone. Normally you can contact the seller by chat or email . Some are very good in exchanging.
It IS possible to flash your phone using fastboot, but I would not personally attempt it and you would lose your warranty . You need rootkits, SDK toolkits, universal drivers and images. Google "bootloop without USB debugging".
When I flashed my yd206 , (after many attempts) I flashed my yd206 to yd201 Russian KitKat ROM first and then did an OTA to lollipop.
Hello!
THink I have bricked my phone, but just checking before I go through what I suppose is a long process with oneplus.
Looking for any help. I had a working device - unlocked bootloader and installed TWRP and magisk using MauronofrioTool. ok - however, I found out I couldn't use a fingerprint security option on that would have been anoying. So... Long story short. I used MauronofrioTool to relock bootloader. Oops - so that didn't work. THen found out I couldn't do anything except stare at g.co/ADH message on my screen. Couldn
't get to fastboot or TWP. ANyway, so I managed to up and down volume and enter into TWRP. Was still connecting to the tool, so I downloaded factory Zips and tried to install via tool after unlocking - Seemed to be working ... but it stopped mid way through a process and hasbn't come back! NOthing at all. I wonder if I could have triggered an OEM thing? ANyway - literally nothing no buttons work no screen action. I see a QUSB_BULK_CID:etc number when connecting the phone, but that is it. No fast boot or any other actions available.
PLease, pretty devastating, Anyone know if I can do anything?
I'm no pro but I use this tool which helped me:
henk-jan said:
I'm no pro but I use this tool which helped me:
Click to expand...
Click to collapse
Thank you. I feel I am little past this stage now though.. Also trying the brick reprieve software . Just can't get my computer to recognise the phone now. No ability to get to emergency download path - think it is my crappy cihinese pc (old Huawei tablet basically) or Windows via apple that have me stranded.
**********SOLVED
THe crappy Chinese language Windows tablet worked as the unbrick OP said WIndows would. Must be a kink in the Windows via Mac that could get me into the situation, but not out.
Very relieved... Even though I still am not 100% sure what I actually ended up clicking to get it to register and connect with the unblock tool (which of course was in Chinese) hahaha.
Cheers
CHeers though
Glad you got it sorted out! Cheers
Need Help, please
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
rickhurl said:
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
cultofluna said:
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
Click to expand...
Click to collapse
Thanks so much. I ended up getting Msmtool to work. Although my device wasn't on (black screen) and it didn't fully show up in the tool, I decided to start the process anyway and it began to load.
I've been on here for over 10 yeas (XDA) I've just lost my account info and made a new one.
Thanks for taking the time to respond. Much appreciated.