[Question] Moto Camera DPI - X Play Q&A, Help & Troubleshooting

So I rooted and wanted to set the screen PPI/DPI to the actual calculated value of 400-403 (Motorola says it's 403 but the actual calculated value is 400.53). Problem is, it screws up the icons in the camera app and Google Search bar on the homecreen. I've attached screenshots to show you what I mean, but I'm sure most of you are aware of this happening as it tends to when you lower the DPI/PPI. The screens of the screwed icons are at 403 DPI/PPI and the screens where the icons are fine are at the default 480 DPI/PPI.
Does anyone know of a way to fix this? Or is it just something that can't be helped at lower DPI/PPI values?

How did you change your DPI? I read that the adb method alone is not enough. You must change the value on build.prop too. Making the two things may work.

update app camera via Google Play Store que resolve!!!!

Or use appsetting to change dpi in apps.
Skickat från min XT1562 via Tapatalk

I have this exact same issue. I changed DPI to 400 using adb. I also have profile picture thumbnails messed up in both Viber and Whatsapp. So far I haven't found any solutions. Changing DPI to 360 works for the camera, but not for thumbnails in Viber or whatsapp.

I'm using 440. Stock is 480. If you in increments of 40 it works. Try 400

ToYeD said:
So I rooted and wanted to set the screen PPI/DPI to the actual calculated value of 400-403 (Motorola says it's 403 but the actual calculated value is 400.53). Problem is, it screws up the icons in the camera app and Google Search bar on the homecreen.
Does anyone know of a way to fix this? Or is it just something that can't be helped at lower DPI/PPI values?
Click to expand...
Click to collapse
Mother of all ad blocking ???
dpacmittal said:
I have this exact same issue. I changed DPI to 400 using adb. I also have profile picture thumbnails messed up in both Viber and Whatsapp. So far I haven't found any solutions. Changing DPI to 360 works for the camera, but not for thumbnails in Viber or whatsapp.
Click to expand...
Click to collapse
PPI is a hardware component i.e how many pixels are there in a inch of screen.
DPI is a software component in broad terms i.e how much area a software is allocated. so changing it to too low will have bad effects.
change the DPI to 430-440 it looks nice and it will solve your problem.
---------- Post added at 06:29 AM ---------- Previous post was at 06:23 AM ----------
LuizHenrique91 said:
How did you change your DPI? I read that the adb method alone is not enough. You must change the value on build.prop too. Making the two things may work.
Click to expand...
Click to collapse
it would be easy if you are rooted. simply go to /system/build.prop and look for ''ro.sf.lcd_density=480'' and change it accordingly.

ToYeD said:
(Motorola says it's 403 but the actual calculated value is 400.53).
Click to expand...
Click to collapse
It's 403,5.... The screen is not exactly 5.5 inches
Sent from my XT1562 using Tapatalk

Do what I did, install the AppSettings via Xposed, choose the DPI you want normally in build.prop, In the AppSettings settings, select Motorola Camera and place it in the DPI 480 (stock), so I use here without problems.

Related

Has any one tried LCDdensity

Just wondering if any owners tried changing the density manually or with lcddensity. Wondering if touchwiz recognize any change in the density. Would love to change this to 200
Will definitely be playing around with the density when I receive mine.
I'm just curious as to what changing the density actually does. Since obviously you can't physically change the screen density, what is the advantage of tricking the phone into thinking it's different via software?
AXIS of Reality said:
I'm just curious as to what changing the density actually does. Since obviously you can't physically change the screen density, what is the advantage of tricking the phone into thinking it's different via software?
Click to expand...
Click to collapse
check this video out.
http://www.youtube.com/watch?v=9yrOAJJK-GY
Usually changing the density makes the screen look more high res by making everything smaller and fitting more information on the screen. If your still using your galaxy s try out lcddensity and change to 200. Touchwiz on 1st galaxy s didnt adjust well to changing the density. default is using 240
Was the first thing i did. Set mine to 202 out if habbit, as most devices get issues with wonky UIs at 200 or below.
Device looks great on 202. The only thing that distorts slight is the quick access tools ( sound and screen rotation only) in the notification bar.
The posituve outweighs the nefative for me.
Sent from my GT-I9100 using XDA App
risq said:
Was the first thing i did. Set mine to 202 out if habbit, as most devices get issues with wonky UIs at 200 or below.
Device looks great on 202. The only thing that distorts slight is the quick access tools ( sound and screen rotation only) in the notification bar.
The posituve outweighs the nefative for me.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
can you take a screen shot? im wondering what the app menu looks like.
+1 for screenshot. I run my DHD at 190. I use LCD Density Changer which has a compatibility mode to make problem apps run full screen, but it needs root

[Q] Smaller font (Working?)

Okay, great device... but really annoying that most apps don't make use of the extra real estate on the screen. Most apps are just blown up versions of for example the Galaxy S2 apps. Meaning most apps are the same but 5.3/4.2 = 1.26 times bigger That's at least a pity The contacts app displays the same amount of contacts on a screen as the Galaxy S2 or S but... with a 1.26 x bigger font (compared to the S2) and 5.3/4=1.33 (lol) x bigger font compared to the Galaxy S
Fortunately there seems to be a setting in the accessibility settings that allows the user to decrease the font in some stock apps. Unfortunately this doesn't work. At least not on my device. Anyone got this working?
And yes, ICS would be a great improvement for such a big screen device.
Is that possible to set another density for the device (maybe you have to root it first)?
siamchen said:
Is that possible to set another density for the device (maybe you have to root it first)?
Click to expand...
Click to collapse
You'd have to root it first, and then push the density down. Not ideal, as some apps then run in a box on the screen, but it does make for smaller fonts, and you can cram more widgets on the screen etc.
I run my HD2 at 160, but then again I have had my eyes lasered!
Root
Go to system/build.prop
Open in editor
change the value of lcd from 240 to 192
See the difference.
U can always go back
All apps wont be scaled to the new lcd value.
eg: TW in sgsII does not scale.
However i always used this value and did not use TW.
Looks very interesting but I'm afraid that I'm not s pro
Sent from my HTC Desire S using XDA App
density change doesn't address the question
Hey ho wait..... this wasn't the question. So does the fontsize changing option work for you guys?
appelflap said:
Hey ho wait..... this wasn't the question. So does the fontsize changing option work for you guys?
Click to expand...
Click to collapse
I think change the font size setting in gingerbread is for display text in text editor or web browser instead of the launcher and most other application as they have their own fixed font size. You cannot do anything to those applications as they has been programmed that way.
siamchen said:
I think change the font size setting in gingerbread is for display text in text editor or web browser instead of the launcher and most other application as they have their own fixed font size. You cannot do anything to those applications as they has been programmed that way.
Click to expand...
Click to collapse
With stock apps I mean the Samsung apps. In the accessibility settings there's an option to change the font size "in the following applications: S planner, Email, Contacts and Messaging" (as stated in the accessibility settings)
Unfortunately this setting doesn't work on my jk4 rom. Maybe others have luck on other roms. Seems like a very usuable option for the note.
drgopoos said:
Root
Go to system/build.prop
Open in editor
change the value of lcd from 240 to 192
See the difference.
U can always go back
All apps wont be scaled to the new lcd value.
eg: TW in sgsII does not scale.
However i always used this value and did not use TW.
Click to expand...
Click to collapse
My lcd.density (or so) was set to 320 on stock!
I changed it to 280 and the system looks now nicer!
Actually, I measured the tab and my calculation would be around 270-280 dpi.
Has anybody other/better data?
By the way, 1st problem after changing lcd density is in S Memo! Background seem to have a fixed 'smaller size' which are then placed wrongly
Another impact: The email-widget does not fit on screen any more (using Launcher Pro) ... Hope in ICS they will fix some of those screen size problems!
fscherz said:
My lcd.density (or so) was set to 320 on stock!
I changed it to 280 and the system looks now nicer!
Actually, I measured the tab and my calculation would be around 270-280 dpi.
Has anybody other/better data?
By the way, 1st problem after changing lcd density is in S Memo! Background seem to have a fixed 'smaller size' which are then placed wrongly
Another impact: The email-widget does not fit on screen any more (using Launcher Pro) ... Hope in ICS they will fix some of those screen size problems!
Click to expand...
Click to collapse
I didn't try it myself yet but I bet it will give a whole lot of trouble with almost every Samsung app on this xhdpi device. Like HTC, they exactly target the screen for which they write software. Unlike most android apps in the market, targeting screens with different specs isn't important. Scaling isn't a requirement for these stock apps. ICS will not solve the problem, because it is still up to the developer which screens will be targeted.
Anyway, back to the original question, I think it is safe to conclude that the font setting doesn't work for anyone. So it is a bug.
I have rooted my phone and tried to use Spare Parts to change the font size to Extremely Small. It works instantly and make the application much more usable. But, there is a problem: The font size will change back to Normal after few hours by itself. Anyone has the same problem?
siamchen said:
I have rooted my phone and tried to use Spare Parts to change the font size to Extremely Small. It works instantly and make the application much more usable. But, there is a problem: The font size will change back to Normal after few hours by itself. Anyone has the same problem?
Click to expand...
Click to collapse
that method also won't scale down graphics to match the smaller fonts. LCD Density Changer accomplishes that and works well.

Screen DPI

Hi, I've just jumped from my modded 240dpi N7100 note2 to brand new N910F note4 and with the 2560x1440 screen everything seems to me so huge on the screen
I have root done and now thinking about changing the size of everything on the screen to more friendly size, anyone has some experience with it on this new battle ground?
I will try to change build.prop but would like to ask first before I do something stupid.
thanks
update!!!
after changing the dpi in build.prop to 340 finished with boot loop
Obecny said:
Hi, I've just jumped from my modded 240dpi N7100 note2 to brand new N910F note4 and with the 2560x1440 screen everything seems to me so huge on the screen
I have root done and now thinking about changing the size of everything on the screen to more friendly size, anyone has some experience with it on this new battle ground?
I will try to change build.prop but would like to ask first before I do something stupid.
thanks
update!!!
after changing the dpi in build.prop to 340 finished with boot loop
Click to expand...
Click to collapse
Hi. U manage to fix it??? Am about to do the same thing now
mackoi71 said:
Hi. U manage to fix it??? Am about to do the same thing now
Click to expand...
Click to collapse
not yet, just going to reflesh it now with original firmware
update:
I am now after refleshing and back to stock dpi settings with no problems
did you try using https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
I used this app on my LGG3 which also has the same QHD screen and it worked perfectly
I've changed it to 480 which is about as small as I think is useful. No boot loop issues.
I did have to use the Xposed app 'App Settings' to reset the stock apps like Clock, Contacts, Camera back to 640.
The issue that everyone has that right now has no solution is the lock screen becomes misaligned.
Hi. U try to change the DPI again?
Sent fra min SM-N910F via Tapatalk
dawheat said:
I've changed it to 480 which is about as small as I think is useful. No boot loop issues.
I did have to use the Xposed app 'App Settings' to reset the stock apps like Clock, Contacts, Camera back to 640.
The issue that everyone has that right now has no solution is the lock screen becomes misaligned.
Click to expand...
Click to collapse
would love a screenshot of that dpi
mackoi71 said:
Hi. U try to change the DPI again?
Sent fra min SM-N910F via Tapatalk
Click to expand...
Click to collapse
I will wait a little bit longer for some 100% solution,
I've just changed now dpi in gmail and chrome using exposed app settings and it works for a short while but after several restarts just stops! now my app settings has no any impact for the apps
all is displayed in 640 dpi only, tried to re-save it again but no luck
ratcom said:
would love a screenshot of that dpi
Click to expand...
Click to collapse
Attached two screenshots - it looks pretty "normal" since I use Nova Prime to increase icon size and such (and you need to make Font size in display large), but you can see the status bar height in the first screenshot and the size of each notification in the second screenshot - much more compact.
dawheat said:
Attached two screenshots - it looks pretty "normal" since I use Nova Prime to increase icon size and such (and you need to make Font size in display large), but you can see the status bar height in the first screenshot and the size of each notification in the second screenshot - much more compact.
Click to expand...
Click to collapse
Looks nice .... I now know what I'm doing later this afternoon
ratcom said:
Looks nice .... I now know what I'm doing later this afternoon
Click to expand...
Click to collapse
Yeah it's a must for me. However be aware that it will misalign the locksceen if you use fingerprint lock. It doesn't impact functionality at all, just visual so I can live with it until hopefully a dev fixes it.
Is it posibble to change the default Samsung launcher to behave like on a tablet (allow landscape) that way? Or maybe installing a different launcher is the solution (do Nova or Google Now allow it?)? I am used to tablets and would love to use my Note 4 with tablet interface...
Hello
Use xposed framework to and install "app settings". Then use a build prop editor and change the ro lcd density from 640 to 480.
Then once you've rebooted you will see that some Samsung apps (including the phone and camera) do not scale well. To fix this - change their dpi back to 640 by using the "App settings" then reboot.
Voila.
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
Oops I missed the reference already made to xposed. Terribly sorry.
Wanam xposed works well on note 4 fwiw
Does anybody know what is name of lock screen? I have dpi 460 and finger print etc. other lock methods look like a ****. So what is name of lock screen so i can chance it with App Settings to normal?
zige said:
Does anybody know what is name of lock screen? I have dpi 460 and finger print etc. other lock methods look like a ****. So what is name of lock screen so i can chance it with App Settings to normal?
Click to expand...
Click to collapse
normally Keyguard.apk but i may be wrong
ratcom said:
normally Keyguard.apk but i may be wrong
Click to expand...
Click to collapse
Yeah i remembered same and tested to change it to 640 but still looking bad... So i'm thinking i need change something else (also?). Is there any other app than App Settings which i can use to change some apps dpi setting?
I personally drop my dpi by 80 on all my devices. So on the note 2 I went from 320 to 240. On the Note 3 I went from 480 to 400. On the Note 4 I went from 560 to 480 and everything worked fine with no boot loops. I used Rom Toolbox to change mine. I also used App Settings in Xposed to change some apps back for usability. Like dialer, gallery, calculator, camera, etc.
zige said:
Yeah i remembered same and tested to change it to 640 but still looking bad... So i'm thinking i need change something else (also?). Is there any other app than App Settings which i can use to change some apps dpi setting?
Click to expand...
Click to collapse
WOOT - thanks for the tip man. Changed keyguard to 640 in app settings, also clicked the apply res to widgets box (not sure if needed), and then rebooted. Simply using the option to kill app didn't reset the lockscreen.
However after reboot my lockscreen with fingerprint is back to 640 and everything else is still at 480.

[Q] Changed DPI resulting in a black bar across the bottom of the Sview cover window

So I just bought my brand new Note 4 (SM-N910W8) and of course the first thing I did was root it and install xposed framework. Everything works fine, I always change the DPI on my Note phones because I like to make use of the extra screen real estate. This worked fine as well, that is until I installed my Sview (S View cover) on it.
The sview window appears fine in the new DPI but across the bottom portion there is a black bar (the screen is off on the bottom third of the window).
I tried using the Xposed app settings mod to change the sview portion of the UI back to 640 DPI (the native resolution), but this didn't work!
has anyone else experienced this on the Note 4? any suggestions to make it work while having the rest of the phone in 480 DPI mode?
Helllpppp
Can you post a picture of what's exactly happening?
c_est_la_vie said:
So I just bought my brand new Note 4 (SM-N910W8) and of course the first thing I did was root it and install xposed framework. Everything works fine, I always change the DPI on my Note phones because I like to make use of the extra screen real estate. This worked fine as well, that is until I installed my Sview (S View cover) on it.
The sview window appears fine in the new DPI but across the bottom portion there is a black bar (the screen is off on the bottom third of the window).
I tried using the Xposed app settings mod to change the sview portion of the UI back to 640 DPI (the native resolution), but this didn't work!
has anyone else experienced this on the Note 4? any suggestions to make it work while having the rest of the phone in 480 DPI mode?
Helllpppp
Click to expand...
Click to collapse
I'm about to do the same
What new setting did you put for the dpi?
This seems to be the same problem with the lock screen and dpi settings. Unfortunately it seems like the dpi settings are baked into the system ui and cannot be modified unless dpi is changed for everything. If been there. Good luck
ravni said:
I'm about to do the same
What new setting did you put for the dpi?
Click to expand...
Click to collapse
I edited the build.prop to have a DPI of 480 instead of 640 (the native DPI).
It's the same thing that happens when you make the same change to the DPI on Note 3 with S-View covers as well.
I am still trying to figure a way to fix this, has anyone found anything new?
The Picture 1 shows what's happening to the Sviewcover. Picture 2 shows me tricking the phone into believing that the Cover is closed (by using a magnet).
I used Xposed App Settings to set the system DPI to 480 (from 640 stock). I set the Sviewcover.apk to 640 as well so the Sviewcover is not misaligned to the left side.
BUT here is the problem, there is a Black bar at the bottom half of the Sviewcover which renders it useless and ugly. The ONLY way I have found to fix this is NOT to alter the DPI for "Android System" and leaving it stock. That way the Sviewcover would show up perfectly without the black bars.
But that defeats the purpose of altering the DPI first place. Why can't samsung allow two zoom levels for user to choose so we can either choose big icons or more screen spaces?
there is a semi solution for this
usually people use rom toolbox to change the entire dpi.
first you must return the dpi to the normal 640 in rom toolbox
then in app settings Xposed change com.android.systemui dpi to 480
and then go to Android System (Android) and change the dpi back to 640
don't forget each time you must turn on the app setting and save after the change
this might effect some of the apps and show it in normal size but it will fix your problem
plus you can change any app's dpi to 480 from app settings later and make it small again.
c_est_la_vie said:
So I just bought my brand new Note 4 (SM-N910W8) and of course the first thing I did was root it and install xposed framework. Everything works fine, I always change the DPI on my Note phones because I like to make use of the extra screen real estate. This worked fine as well, that is until I installed my Sview (S View cover) on it.
The sview window appears fine in the new DPI but across the bottom portion there is a black bar (the screen is off on the bottom third of the window).
I tried using the Xposed app settings mod to change the sview portion of the UI back to 640 DPI (the native resolution), but this didn't work!
has anyone else experienced this on the Note 4? any suggestions to make it work while having the rest of the phone in 480 DPI mode?
Helllpppp
Click to expand...
Click to collapse
In app settings, as well as setting the DPI to 640 you also have to tick the box "apply res to widgets" If you don't, the widgets still render at the system DPI. You have to apply the 640 DPI to the com.android.keyguard (I think that's what it's called it's got keyguard in the name).
Yup, Batfink is right. I forgot about the apply to widget setting, bur when I finally applied it everything was good.
omid_freesky said:
there is a semi solution for this
usually people use rom toolbox to change the entire dpi.
first you must return the dpi to the normal 640 in rom toolbox
then in app settings Xposed change com.android.systemui dpi to 480
and then go to Android System (Android) and change the dpi back to 640
don't forget each time you must turn on the app setting and save after the change
this might effect some of the apps and show it in normal size but it will fix your problem
plus you can change any app's dpi to 480 from app settings later and make it small again.
Click to expand...
Click to collapse
This will make the main UI at 640DPI which defeats the purpose of changing the DPI first place.
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
Applethrow said:
Yup, Batfink is right. I forgot about the apply to widget setting, bur when I finally applied it everything was good.
Click to expand...
Click to collapse
I checked "apply to widgets" for both Keyguard and Sviewcover but the Black bar is still present.
When I come to think of it, I only changed dpi for the system.ui process. Then set keyguard, camera, contacts etc to 640. Didn't touch Android System.
Applethrow said:
When I come to think of it, I only changed dpi for the system.ui process. Then set keyguard, camera, contacts etc to 640. Didn't touch Android System.
Click to expand...
Click to collapse
This is a semi-fix as you would have to alter the DPI for EVERY app to render at 480DPI but I guess this is the ONLY method at the moment :crying:
Yes, you are absolutely right. Just tried it and s-view window got a black bottom bar. Maybe I'll have switch to my wallet flip cover lol

Google Cardboard

If anyone has problems getting cardboard to work correctly, switching DPI from 480 (default) to 400 fixes the problem.
thanks. does it mean this phone has a real gyroscope and compass and works otherwise fine with cardboard?
IceDBear said:
If anyone has problems getting cardboard to work correctly, switching DPI from 480 (default) to 400 fixes the problem.
Click to expand...
Click to collapse
Thanks for your suggestion. I have this problem either. And I dont know how to fix it ,So I flash back to stock rom for cardboard. :good:
LineageOS 16, changing dpi did nothing. Solved by creating a custom vr viewer profile with values x2.62 higher than actual.
Edit - this scale solution producing weird results.
Found better one: edit build.props
Find ro.sf.lcd_density in build.props and set to 406
ro.sf.lcd_density=406
Click to expand...
Click to collapse
After that, to restore ui scale, change dpi to 480 from any dpi changing app.
Now it is possible to use VR profiles as usual.
kotofos said:
LineageOS 16, changing dpi did nothing. Solved by creating a custom vr viewer profile with values x2.62 higher than actual.
Edit - this scale solution producing weird results.
Found better one: edit build.props
Find ro.sf.lcd_density in build.props and set to 406
After that, to restore ui scale, change dpi to 480 from any dpi changing app.
Now it is possible to use VR profiles as usual.
Click to expand...
Click to collapse
Could you provide qr that you have generated?

Categories

Resources