Q&A for [Dev][Recovery] TWRP 2.8.7.1 for G928C | first compile !!!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Dev][Recovery] TWRP 2.8.7.1 for G928C | first compile !!!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello,
I did install it on a S6 edge+ (G928C).
The install went fine (do not forget to uncheck Auto Reboot in Odin).
I then installed SuperSU 2.46. After that, I tried to reboot, but then got stuck at "Samsung Galaxy S6 edge+" black&white screen
I am currently downloading the stock firmware to start over with a fresh device.
Currently I wouldn't advise anyone to install this recovery, seeing my experience.
I'll try again with the fresh device, to check if the bootloop problem is consistent.
RonanT said:
Hello,
I did install it on a S6 edge+ (G928C).
The install went fine (do not forget to uncheck Auto Reboot in Odin).
I then installed SuperSU 2.46. After that, I tried to reboot, but then got stuck at "Samsung Galaxy S6 edge+" black&white screen
I am currently downloading the stock firmware to start over with a fresh device.
Currently I wouldn't advise anyone to install this recovery, seeing my experience.
I'll try again with the fresh device, to check if the bootloop problem is consistent.
Click to expand...
Click to collapse
You can not "root" Now, the device will bootloop if without a custom kernel supports the "Root". Similar to "UniKernel" for S6 / S6 egde
Well, I confirm the bootloop as well.
I reinstalled the stock firmware.
I installed the recovery.
==> Bootloop is happening.
As it happened twice to me and once to another poster, I suggest this first compile is not the good one.
I might try a go at compiling one myself if I have the time.
its crazy why they post the recovery all over the net without checking it
but i dont understant the mod here if he see its not good he need to erase the thread cause the recovery not good end of line
with root without root
it can boot normally but the moment you get in recovery then you cant boot up !!!!!!!!!!
Manh_IT said:
You can not "root" Now, the device will bootloop if without a custom kernel supports the "Root". Similar to "UniKernel" for S6 / S6 egde
Click to expand...
Click to collapse
Thanks!
Related
Q&A for [RECOVERY][i9500] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][i9500] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Newbie here..
Hello! Im running a stock rom, stock recovery on my gti9500 and installed xposed installer, wanam xpose and xuimod module in it, if i flash a custom recovery like this one without uninstalling the xposed framework and modules, will there be any problem? I really like the modules and im not interested in removing this app on my phone. Thanks and sorry for the noob question
TWRP wont work
Hi!
I rooted my Galaxy Note 2 GT N7100 before and TWRP worked just fine. But I decided to flash my device back to its stock ROM. now when I try to install TWRP again Odin would say it passed but when I reboot it so I can get to TWRP mode its stuck in Android system recovery 3e. What can I do to fix this?
hi guys, i've been on 2.6.1.0 on my i9500 rooted running PAC ROM, i've tried upgrading through the twrp manager but just says the "email the dev" thing, I've tried going through odin but for whatever reason it just freezes whenever i pick the tar file, is it possible to just flash the latest version through my current 2.6 twrp?
edit: managed to solve it myself thanks guys
edit2: twrp manager doesn't seem to work it turns out :\ it goes through all the steps and then remains on the same build.
not working on my note 3 neo SM-N750
not able to flash twrp from recovery mode it is saying
FOOTER IS WRONG;
SIGNATURE VERIFICATION FAILED;
guys please help me out its urgent
thnx in advance
Have this problem.
Flash TWRP and doesn't respond the touch in recovery mode.
Flash Philz Touch and no problem.
Using lastest bootloader HOA7.
Please guys and @Dees_Troy, help me.
Hi to all, I installed the TWRP manager ap from the playstore, when I go to "install TWRP" and choose my devise which I guess it's ja3g (for I9500) the app finds no versions to install, am I missing something here? I mean, I obviously am, but I can't think what it is, I'm pretty new at this.
I just rooted and wanted to install ozcan rom, but the instructions for this say that TWRP must be used, does anyone know about this?
Thanks.
andreskafe said:
Have this problem.
Flash TWRP and doesn't respond the touch in recovery mode.
Flash Philz Touch and no problem.
Using lastest bootloader HOA7.
Please guys and @Dees_Troy, help me.
Click to expand...
Click to collapse
About my problem with TWRP, I do not know what improvements or changes included in the versión GearCM Recovery TWRP 2.8.5.0 but it works perfectly, the touch and the various options.
Hello.
I'm using TWRP 2.8.6.0 and GearCM.
My Internal Memory is encrypted.
As i see in changelog, TWRP can decrypt internal memory, but it doesen't.
Is it bug? Or something else?
You can support galaxy s5? Exinos version
Q&A for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
xolanir said:
So I flashed the latest TWRP 2.8.1.0 using ADB on my 2012 N7 running the official 5.0. Read the OP to see if it was compatible and didn't see anything mentioned about it. It flashed without an issue but upon booting into recovery, I got a dead robot with the red triangle with an exclamation. Does this mean that Android 5.0 isn't supported yet? Thx in advance for the help!
Edit: Reflashed and fixed. 1st flash was probably a bad download. Thx!
Edit 2: flashed recovery.img successfully, but was stuck on boot up for 30mins. Had to reflash device back to stock to fix. Is lollipop not supported yet?
Click to expand...
Click to collapse
same here
this work, thank you so much!
Franz22 said:
this work, thank you so much!
Click to expand...
Click to collapse
Was able to figure it out and make it work. Not sure what it was that didn't let cmd flash the recovery, but when I used the flashing recovery option in NRT, it worked like a charm.
http://forum.xda-developers.com/showthread.php?p=56752535
[RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
[quote name="bombadier" post=56749620]How are you installing the ROM? If you are using the factory images then extract the boot and system images and flash them using fastboot ,if its not booting past......
Sent from my Nexus 7 using Tapatalk
Trying to install last TWRP recovery on dev-unlocked HTC One (M7) via fastboot.
All was ok, but cannot enter into recovery. It shows me "Entering recovery" page with HTC logo and nothing happened.
And when i tried to use .apk into Android it says "TWRP Manager has crashed".
download website seems not working either with app or by website
is there any mirror ?
thanks
Anybody having 2.8.4.1 as a flashable zip?
Install TWRP on Xperia Acro S lt26w
Hi to all. How I can Install TWRP on my Xperia Acro S lt26w. I saw ROMS for my phone with TWRP, but I cant manualy install it becouse my phone model in TWRP Manager (ROOT) from Google Play is not listed.
Sry for bad English.
So i had hurricane v12 working on my n7100 for quite some time and today i decided to flash another rom, ihad twrp 2.7 installed on my N7100, so today i updated to twrp 2.8.6 in hopes of installing another rom, and right after twrp update when i rebooted i noticed i have no signal and that my imei is corrupted, it says it's unknown. i have an old efs.img but cant restore it, tried dr.ketans solution and this one and couldnt restore the imei. do i need to have same rom installed as when i made the efs backup? becaouse im not sure if the backup i have is from when i had hurricane installed, maybe its from 4.2 version of android. Is there any help for my phone?
Leads to bootloop
Moto G XT033 with Lollipop 5.0.2
TWRP was working nice until I make a ROM backup. After finishing the backup (only saved the ROM file. Did not restore) I rebooted the system and BAN! My phone was gone!
Searching a few topics, I found more users with the same problem: uses backup feature and get a bootloop.
Watch your steps, moto G users!
Q&A for [RECOVERY][mako] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][mako] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can anyone please post a mirror. The download for me always gets stuck at 99.99%. I have tried downloading it multiple times but it always gets stuck.
Thanks.
NVM it worked.
Disable automatic decryption
Apologies if this has been asked before, but how to I disable automatic decryption?
A few days ago, my encrypted Nexus 4 stopped asking for my decryption password, even though it said it was still encrypted in settings. After a lot of looking around, I figured out that TWRP was automatically decrypting my storage on boot. This is a really useful feature, but in my case, I had intentionally encrypted my device because I wanted the additional security.
There doesn't seem to be an option in TWRP settings to disable automatic decryption, so I'm wondering if anyone could help me out with what I need to do.
How can i update from 2.7.0.0
Hi all,
I have currently installed TWRP 2.7.0.0 in my LG G2 VS980. How can i update TWRP to 2.8.5.0?
i tried flashing the last version but always show an error, and assert failed related to loki.sh.
Thanks for all.
TWRP Manager - Good stuff
I had this same issue on a nexus 5. I tried restorecon with no luck. I was able to use TWRP Manager (Play Store). It noticed on bootup that my sdcard wasn't reading correctly and offered to patch it. I ran the patch, rebooted, and then was able to see TWRP folder when booted via MFT.
where can i find 2.8.6.0 flashable ZİP file please help...
TWRP 2.8.6 does not see encrypted sdcard on N4
Looks like I have a related problem to those quoted below on my N4.
I had problems with the nightly updates of CM 12.1 which would not reboot with the installed older (don't remember which release) TWRP. Thought I might need a newer recovers. Flashed 2.8.6 and now I do not get a prompt to enter the password for the encrypted device.
cheers
afx
Neet said:
I accidentally updated TWRp to 2.8.60 and now I cant access my 'sdcard' in twrp. ...
Click to expand...
Click to collapse
speakxj7 said:
are you encrypted? i haven't had luck with recent twrp's on my FDE encrypted device.
reverted back to 2.8.3 and was a-ok.
edit: tested more builds, 2.8.3-2.8.5 worked, just 2.8.6 gave crypto issues.
Click to expand...
Click to collapse
murteci said:
where can i find 2.8.6.0 flashable ZİP file please help...
Click to expand...
Click to collapse
Why ZIP? Why not an IMG from the TWRP devices page?
cheers
afx
Backup restore always fails
Hi,
I think since version 2.8.6.0 I cannot restore any backups made with TWRP anymore. It always fails at 38% or so. I read on some forum that TWRP was not able to restore backups bigger than 1,5 GB at all. Is that true? I tried it several times with several newly created backups with no chance.
Thanks for your help!
Q&A for [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
alexk56
It is so pity that neither CWM 6.0.4.9 nor 6.0.5.1 are not working.Both usually stop on boot creation.But-on opposite side - nice and
modern looking of theme.
alexk56 said:
It is so pity that neither CWM 6.0.4.9 nor 6.0.5.1 are not working.Both usually stop on boot creation.But-on opposite side - nice and
modern looking of theme.
Click to expand...
Click to collapse
They work.
BootImage Freeze
Hi Olivier,
I have the same problem as one already mentioned here ... when trying to make a NAndroid Backup it freezes on "Backing up boot image..."
The problem is that all the other CWM version shows some bug, like -backup /data error- or something so its a REAL problem to make NAND on this tablet...
On the other hand THX for Your work man! Sincerely, JayM
PS2MirXas: Yep, posting "they work" is really helpful...
Bug!
Hey Olivier,
I just downloaded your recovery from hubdroid.It came in a .tar folder which is quite amusing. Then I extracted the recovery.IMG from the .tar folder .I used both flashify and rashr to try flashing.It said success but when I rebooted into recovery it said no command ! I did reboot the system. But please help me onto this matter.
Need help for my lenovo Ideatab A3000 bootloop
Here's the whole story , I need to change build.prop to get apps for my tab that is not compatible . now I changed it using Es Explorer and i'm rooted I changed the Device model and brand something like that . then I read on the net that after changing build.prop reboot your device . Now i reboot my device then the whole lenovo logo goes landscape the boom I'm STUCKED! NOOO IM BOOT LOOP. Now for the most Easies way to do is to APPLY UPDATE FROM SD CARD . The question is Can someone give me the ZIP FILE like I just download it and put on my sd card then insert my sd card then Power + Volume up choose Recovery then "APPLY UPDATE FROM SD CARD" And just choose the Zip file. Please Help me Guys . THe only thing I changed is the build.prop I haven't changed the ROM . ONLY BUILD.PROP TO RECOVER!!
PLS.......
Will This work for lenovo B8000-H 4.4.2
this recovery working with lenovo a3300-hv?? tq.
Please update the download link for the recovery.
Says server not found.
Q&A for Installing TWRP 2.8.1.2 recovery on Note 4 (SM - N910C)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Installing TWRP 2.8.1.2 recovery on Note 4 (SM - N910C). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Any predictions update to version 2.8.3.0? Grateful for the great work!
how to install it?
thanks. very nice job
---------- Post added at 09:17 PM ---------- Previous post was at 09:11 PM ----------
thanks.
why i can't download twrp 2.8.5 it stops downloading at 99% every time i download it?!
N910-H ????
Is backup and restore problem solved
Thanks in advance
Loop on TWRP Note 4 (N910H)
Hi, I've installed TWRP 2.8.6.1 on my N910H with Flashify.
And now I can't reboot into system.
Everytime I press reboot (even if I choose system reboot) it reboot into TWRP.
Could you help me, please?
Asad Khan 2085 said:
Is backup and restore problem solved
Thanks in advance
Click to expand...
Click to collapse
It's still not wiping and restoring completely even on v 2.8.6.1
SM-N910C
imepv7 said:
It's still not wiping and restoring completely even on v 2.8.6.1
SM-N910C
Click to expand...
Click to collapse
Looks good to me
TWRP usage for creating custom packs
Hi.
Can someone explain to me, how to use TWRP for creating custom packages? Custom flashes I mean. Let's say, I have originally SEB modem firmware and it's a bit buggy. How do I create a package for placing for example Poland's newer version of modem if I have modem.bin file from Poland's firmware. As I noticed TWRP uses zip file with files to be placed + some meta files.
Would be very thankfull if someone explain to me how to make custom packages to flash over TWRP or give me some manual how to do that.
Thanks a lot!
not worked
Hi, i just bought used note 4 (910u) phone and want to install costom rom, probelm is that its has chinese recovery and i want to change to trwp recovery. I tried to install it but nothing changes. When i go to recovery mode there is old one which is in chinese. I wont to try instal it through odin but another problem appiered i cant get in download mode. When i press power - and home its goes to recovery mode.
Can someone know how to install new recovery mode?
There's option of EFS backup in TWRP recovery.
If somehow there is some problem with EFS folder(seem to be very rare)
I can restore EFS backup again with Recovery ?
How about f2fs? Some roms have support but I didn't find any recover with f2fs support.
Sent from my SM-G935F using Tapatalk