[Q&A] [RECOVERY][mako] TWRP 2.8.1.0 touch recovery [2014-10-29] - Nexus 4 Q&A, Help & Troubleshooting

Q&A for [RECOVERY][mako] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][mako] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Can anyone please post a mirror. The download for me always gets stuck at 99.99%. I have tried downloading it multiple times but it always gets stuck.
Thanks.
NVM it worked.

Disable automatic decryption
Apologies if this has been asked before, but how to I disable automatic decryption?
A few days ago, my encrypted Nexus 4 stopped asking for my decryption password, even though it said it was still encrypted in settings. After a lot of looking around, I figured out that TWRP was automatically decrypting my storage on boot. This is a really useful feature, but in my case, I had intentionally encrypted my device because I wanted the additional security.
There doesn't seem to be an option in TWRP settings to disable automatic decryption, so I'm wondering if anyone could help me out with what I need to do.

How can i update from 2.7.0.0
Hi all,
I have currently installed TWRP 2.7.0.0 in my LG G2 VS980. How can i update TWRP to 2.8.5.0?
i tried flashing the last version but always show an error, and assert failed related to loki.sh.
Thanks for all.

TWRP Manager - Good stuff
I had this same issue on a nexus 5. I tried restorecon with no luck. I was able to use TWRP Manager (Play Store). It noticed on bootup that my sdcard wasn't reading correctly and offered to patch it. I ran the patch, rebooted, and then was able to see TWRP folder when booted via MFT.

where can i find 2.8.6.0 flashable ZİP file please help...

TWRP 2.8.6 does not see encrypted sdcard on N4
Looks like I have a related problem to those quoted below on my N4.
I had problems with the nightly updates of CM 12.1 which would not reboot with the installed older (don't remember which release) TWRP. Thought I might need a newer recovers. Flashed 2.8.6 and now I do not get a prompt to enter the password for the encrypted device.
cheers
afx
Neet said:
I accidentally updated TWRp to 2.8.60 and now I cant access my 'sdcard' in twrp. ...
Click to expand...
Click to collapse
speakxj7 said:
are you encrypted? i haven't had luck with recent twrp's on my FDE encrypted device.
reverted back to 2.8.3 and was a-ok.
edit: tested more builds, 2.8.3-2.8.5 worked, just 2.8.6 gave crypto issues.
Click to expand...
Click to collapse

murteci said:
where can i find 2.8.6.0 flashable ZİP file please help...
Click to expand...
Click to collapse
Why ZIP? Why not an IMG from the TWRP devices page?
cheers
afx

Backup restore always fails
Hi,
I think since version 2.8.6.0 I cannot restore any backups made with TWRP anymore. It always fails at 38% or so. I read on some forum that TWRP was not able to restore backups bigger than 1,5 GB at all. Is that true? I tried it several times with several newly created backups with no chance.
Thanks for your help!

Related

[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16

[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16
Q&A for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.0.0 TeamWin Recovery Project 9/16. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi.. I have 5 backups witch can be visible in TWRP but in windows explorer when phone is connected and also phone root explorer can't be see in twrp back up folder. I want to manage it somehow. thanx
Gizmundo said:
Hi.. I have 5 backups witch can be visible in TWRP but in windows explorer when phone is connected and also phone root explorer can't be see in twrp back up folder. I want to manage it somehow. thanx
Click to expand...
Click to collapse
What folder did you store them in?
bigbiff said:
What folder did you store them in?
Click to expand...
Click to collapse
I have just made the backups. When I am in twrp recovery I can see them all. But on the internal card- twrp-backup is nothing either on the external card-twrp-backup is nothing but I didin't make the backup on ext. When I made a backup I choosed internal storage in twrp
Gizmundo said:
I have just made the backups. When I am in twrp recovery I can see them all. But on the internal card- twrp-backup is nothing either on the external card-twrp-backup is nothing but I didin't make the backup on ext. When I made a backup I choosed internal storage in twrp
Click to expand...
Click to collapse
Sorted...folder twrp-backpu copied to pc, deleted on phone int, copied back, suddenly is there
Gizmundo said:
Sorted...folder twrp-backpu copied to pc, deleted on phone int, copied back, suddenly is there
Click to expand...
Click to collapse
I think it's because of the permissions that TWRP sets on the folder. You need to use a root file explorer to see them.
Hi there are a few version of the Galaxy Tab 4 8.0 that have no support for a custom recovery.
Source files have been found and are ready to be worked with.
The devices we would like to bring support to are the:
T330NU source file:
http://www.4shared.com/zip/UG28maH2ce/SM-T330NU_NA_KK_Opensource.html
T335K source file:
http://www.4shared.com/zip/9Y4qzw1zce/SM-T335K_KK_Opensource.html
T335L source file:
http://www.4shared.com/zip/nZ4xmfNgba/SM-T335L_KK_Opensource.html
T337a source file:
http://www.4shared.com/zip/21kf9dZYce/SM-T337A_NA_KK_Opensource.html
If ANYONE is willing or knows someone who could be willing to port a custom recovery to these devices it would be greatly appreciated if you could pass on the message and spread the word. If we all do work together we should be able to get this done.
There are many people who are willing to test the final work. Thanks in advance.
Thanks for share. i was using CWM and wanted to change it as TWRP. i had flashed it with odin but it did not opened in recovery mod. Then i have flashed CWM with odin and recovery menu came back. is there any suggestion about this. Thanks.
Thank you for the input ...
hello
This file is now available and the problems it has been resolved
twrp
Note 3 9005 ( Snapdragon )
openrecovery-twrp-2.8.3.0-hlte-4.4.img.tar
I can not download from the homepage
Who can help me pass mega
Greetings everyone,
So I am trying to update my TWRP from 2.8.0.X to 2.8.4.X (latest version), however for some reason I can not find anything beyond V2.8.0.X on TWRP official download site on the thread, I am looking for Note 3 Qualcomm hlte version.
Is there another website I should be using to get latest updated version of TWRP for Note 3?
new problem detected
if i try to fix permissions i get this log:
Fixing permissions...
Loading packages...
E:Error parsing XML file.
E:Error parsing XML file.
E:Error parsing XML file.
Fixing /system/app permissions...
Fixing /data/app permissions...
Fixing /data/data/ permissions...
Fixing /data/data/ contexts
Done fixing permissions.
Done.
What’s going wrong? Why i get this errors?
Rooting
HI
TWRP 2.8.6.0 is working on android 4.4, does it also work for android 5.0 (Build nl8) on Note 3 n9005 ?
or is CF-Auto-Root reccommended? Which one shoud I flash on my device?
Same error... with TWRP 2.8.6.1
TWRP 2.8.6.0 working
BERMUDA666679 said:
HI
TWRP 2.8.6.0 is working on android 4.4, does it also work for android 5.0 (Build nl8) on Note 3 n9005 ?
or is CF-Auto-Root reccommended? Which one shoud I flash on my device?
Click to expand...
Click to collapse
giogio80 said:
Same error... with TWRP 2.8.6.1
TWRP 2.8.6.0 working
Click to expand...
Click to collapse
Make sure you flash the 4.4 bootloader version of TWRP.
adb sideload not working?
when i plugged in my phone with recovery mode adb shows
(serial code ) Recovery
when i start adb devices no found....
Syzygium said:
adb sideload not working?
when i plugged in my phone with recovery mode adb shows
(serial code ) Recovery
when i start adb devices no found....
Click to expand...
Click to collapse
Does any device show in Device Manager?
bigbiff said:
Does any device show in Device Manager?
Click to expand...
Click to collapse
In Device Manager :
Samsung_android triangle warning sign when I start ADB sideload.
I downloaded the driver from Here , installed the driver ,problem still persist.
TWRP 2.8.6.1
EDIT: I'm using windows 8.1 x64
EDIT2: Tested on another PC , same problem.
works perfekt many thanks!

[Q&A] [RECOVERY][jfltexx] TWRP 2.8.1.0 touch recovery [2014-10-29]

Q&A for [RECOVERY][jfltexx] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][jfltexx] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi guys,
I cannot get my Verizon GS4 to boot in to twrp recovery. I've tried both twrp coordinator (stuck at "processing data from server") and twrp manager. in twrp manager i've tried installing twrp using normal install and install from img file. both appeared to download and install properly, but when I boot into recovery mode (either through twrp manager or through the normal samsung method) I get stuck in download mode instead with a "could not do normal boot" message. I end up needing to re-flash the stock kernel to get unstuck. Also, I couldn't find a tar file for jftlevzw to flash via Odin.
Any suggestions?
same issue for me. 2.7.1.0 solved the issue
How to view encrypted drives?
I'm running TWRP 2.8.3.0 and CM11, and have encrypted my phone. Ever since thenwhen I boot into recovery none of my drives will mount. Is there any way to decrypt my drives on TWRP?
installing 2.8.4.0 to jfltexx
Hi Everyone,
I would like to install the newest twrp to my i9505.
Android version XXUGNG8 4.4.2, samsung stock one.
I have root, and installed twrp app from play.
All set, do i need something other to flash it or simply just hit INSTALL RECOVERY?
Theres a warning message after i hit it about /dev/block/mmcblk0p21. Whats this?
Thx!
Edit: googled it! mmcblk0p21 is right place to choose.
The only thing is i get the message with the unwritable sd. When i press yes, nothing happens. All the time i start the app the message appears.
Edit 2: Nobody using this one i guess. Gonna install cwm instead.
Hey guys,
I wanted to have my phoned backups stored on my computer as well.
In attempt to do so I have just copied the TWRP folder to the computer, however, when I copy the folder back to the phone it won't list as a restorable backup on TWRP.
Anyone could advise how to have then backups on a computer so that I could in the future just easily copy paste and restore?
Thanks!
official 2.8.6.0
the official twrp website now lists a 2.8.6.0 img file in their download section, after downloading, flashing and booting into recovery it shows version 2.8.5.0 ... strange
Wrong version number in image?
Hi. Thank you for this glorious recovery
However - I'm on i9505 jfltexx - downloaded twrp-2.8.6.0-jfltexx.img (was on 2.8.4), flashed, now version is 2.8.5 - Did you forget to update version number?
https://github.com/omnirom/android_bootable_recovery/blob/android-5.0/variables.h
Except for this minor detail, it's working great thus far Great job!
-Qhriz
thanks for sharing
[Q] Recovery Update.
Hi! My friend has an S4 i9505 with TWRP recovery v2.6.1, and wants to flash a lollipop rom but its required to have the v2.8.6 which has f2fs support. Is it okay to flash the newest version via ODIN? Thank you.
...
galaxy s4 albe s6 porting problem
followed step by step guide: I had lollipop official samsung rom; I rooted with auto root; installed TWRP recovery; wiped data, dalvik and cache; flashed the custom rom (version 2.0). Now it is locked in the Samsung logo since 15 minutes ago. I dont think it is ok. Please help me.
You don't specify which custom ROM you installed, but if it's an Android 5.x ROM, the initial boot after an install can take upwards of a half hour to accomplish due to ART having to compile all apps.
I can not access the recovery menu, it hangs on the logo of TWRP. What can I do?
Sorry for my english.
Enviado de meu GT-I9505 usando Tapatalk
What version of TWRP did you install?
I was usually getting access recovery mode. But it started to give this issue today. I am using version 2.8.7.0 AntaresOne
Enviado de meu GT-I9505 usando Tapatalk
Install the version at the TWRP website in place of the AntaresOne F2FS-modified version and see if that changes anything.
I've tried and continued the same problem ?
Enviado de meu GT-I9505 usando Tapatalk
Your phone's storage seems to be corrupt. Flash a stock ROM through Odin, then flash TWRP through Odin. That should fix things.
Fixed with Flashify back to v2.8.7.0. Will go from there. Original question below
Oops. I did something wrong. At the suggestion of some forum members on another thread I attempted to update to 3.0.2-0 Coming from '[JDCTeam][Recovery]TWRP Touch Recovery 3.0.0-0 with F2FS Support', I followed the instructions on the twrp.me site for the S4 VZW I545:
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
I dowloaded twrp-3.0.2-0-jfltevzw.img, confirmed the MD5 first and then did the flash per the above. Once I did this and rebooted to recovery, I got ! System software not authorized by Verizon Wireless...
I am on MDK bootloader. I thought the image was Loki'd already? I'm not sure how to fix? It said that the image isn't flashable via Odin, so where do I start, TWRP Manager? It looks like after a few tries it's booting to Android so I'm going to try that. Where did I go wrong?
TWRP Manager install fails. Rebooting and trying again..."Something went wrong. Flashing recovery was unsuccessful. Either you already have this recovery or another error has occurred..." Hmm...I don't see an error log or anything. Note that under "Recovery installed" it says "TWRP TWRP". Stumped. Tried the dd method. It provided no errors, but upon reboot to recovery, I get the same ! message.
I suspect I need to Odin back to stock...

[Q&A] [RECOVERY][i9500] TWRP 2.8.1.0 touch recovery [2014-10-29]

Q&A for [RECOVERY][i9500] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][i9500] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Newbie here..
Hello! Im running a stock rom, stock recovery on my gti9500 and installed xposed installer, wanam xpose and xuimod module in it, if i flash a custom recovery like this one without uninstalling the xposed framework and modules, will there be any problem? I really like the modules and im not interested in removing this app on my phone. Thanks and sorry for the noob question
TWRP wont work
Hi!
I rooted my Galaxy Note 2 GT N7100 before and TWRP worked just fine. But I decided to flash my device back to its stock ROM. now when I try to install TWRP again Odin would say it passed but when I reboot it so I can get to TWRP mode its stuck in Android system recovery 3e. What can I do to fix this?
hi guys, i've been on 2.6.1.0 on my i9500 rooted running PAC ROM, i've tried upgrading through the twrp manager but just says the "email the dev" thing, I've tried going through odin but for whatever reason it just freezes whenever i pick the tar file, is it possible to just flash the latest version through my current 2.6 twrp?
edit: managed to solve it myself thanks guys
edit2: twrp manager doesn't seem to work it turns out :\ it goes through all the steps and then remains on the same build.
not working on my note 3 neo SM-N750
not able to flash twrp from recovery mode it is saying
FOOTER IS WRONG;
SIGNATURE VERIFICATION FAILED;
guys please help me out its urgent
thnx in advance
Have this problem.
Flash TWRP and doesn't respond the touch in recovery mode.
Flash Philz Touch and no problem.
Using lastest bootloader HOA7.
Please guys and @Dees_Troy, help me.
Hi to all, I installed the TWRP manager ap from the playstore, when I go to "install TWRP" and choose my devise which I guess it's ja3g (for I9500) the app finds no versions to install, am I missing something here? I mean, I obviously am, but I can't think what it is, I'm pretty new at this.
I just rooted and wanted to install ozcan rom, but the instructions for this say that TWRP must be used, does anyone know about this?
Thanks.
andreskafe said:
Have this problem.
Flash TWRP and doesn't respond the touch in recovery mode.
Flash Philz Touch and no problem.
Using lastest bootloader HOA7.
Please guys and @Dees_Troy, help me.
Click to expand...
Click to collapse
About my problem with TWRP, I do not know what improvements or changes included in the versión GearCM Recovery TWRP 2.8.5.0 but it works perfectly, the touch and the various options.
Hello.
I'm using TWRP 2.8.6.0 and GearCM.
My Internal Memory is encrypted.
As i see in changelog, TWRP can decrypt internal memory, but it doesen't.
Is it bug? Or something else?
You can support galaxy s5? Exinos version

[Q&A] [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]

Q&A for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
xolanir said:
So I flashed the latest TWRP 2.8.1.0 using ADB on my 2012 N7 running the official 5.0. Read the OP to see if it was compatible and didn't see anything mentioned about it. It flashed without an issue but upon booting into recovery, I got a dead robot with the red triangle with an exclamation. Does this mean that Android 5.0 isn't supported yet? Thx in advance for the help!
Edit: Reflashed and fixed. 1st flash was probably a bad download. Thx!
Edit 2: flashed recovery.img successfully, but was stuck on boot up for 30mins. Had to reflash device back to stock to fix. Is lollipop not supported yet?
Click to expand...
Click to collapse
same here
this work, thank you so much!
Franz22 said:
this work, thank you so much!
Click to expand...
Click to collapse
Was able to figure it out and make it work. Not sure what it was that didn't let cmd flash the recovery, but when I used the flashing recovery option in NRT, it worked like a charm.
http://forum.xda-developers.com/showthread.php?p=56752535
[RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
[quote name="bombadier" post=56749620]How are you installing the ROM? If you are using the factory images then extract the boot and system images and flash them using fastboot ,if its not booting past......
Sent from my Nexus 7 using Tapatalk
Trying to install last TWRP recovery on dev-unlocked HTC One (M7) via fastboot.
All was ok, but cannot enter into recovery. It shows me "Entering recovery" page with HTC logo and nothing happened.
And when i tried to use .apk into Android it says "TWRP Manager has crashed".
download website seems not working either with app or by website
is there any mirror ?
thanks
Anybody having 2.8.4.1 as a flashable zip?
Install TWRP on Xperia Acro S lt26w
Hi to all. How I can Install TWRP on my Xperia Acro S lt26w. I saw ROMS for my phone with TWRP, but I cant manualy install it becouse my phone model in TWRP Manager (ROOT) from Google Play is not listed.
Sry for bad English.
So i had hurricane v12 working on my n7100 for quite some time and today i decided to flash another rom, ihad twrp 2.7 installed on my N7100, so today i updated to twrp 2.8.6 in hopes of installing another rom, and right after twrp update when i rebooted i noticed i have no signal and that my imei is corrupted, it says it's unknown. i have an old efs.img but cant restore it, tried dr.ketans solution and this one and couldnt restore the imei. do i need to have same rom installed as when i made the efs backup? becaouse im not sure if the backup i have is from when i had hurricane installed, maybe its from 4.2 version of android. Is there any help for my phone?
Leads to bootloop
Moto G XT033 with Lollipop 5.0.2
TWRP was working nice until I make a ROM backup. After finishing the backup (only saved the ROM file. Did not restore) I rebooted the system and BAN! My phone was gone!
Searching a few topics, I found more users with the same problem: uses backup feature and get a bootloop.
Watch your steps, moto G users!

[Q&A] [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]

Q&A for [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
alexk56
It is so pity that neither CWM 6.0.4.9 nor 6.0.5.1 are not working.Both usually stop on boot creation.But-on opposite side - nice and
modern looking of theme.
alexk56 said:
It is so pity that neither CWM 6.0.4.9 nor 6.0.5.1 are not working.Both usually stop on boot creation.But-on opposite side - nice and
modern looking of theme.
Click to expand...
Click to collapse
They work.
BootImage Freeze
Hi Olivier,
I have the same problem as one already mentioned here ... when trying to make a NAndroid Backup it freezes on "Backing up boot image..."
The problem is that all the other CWM version shows some bug, like -backup /data error- or something so its a REAL problem to make NAND on this tablet...
On the other hand THX for Your work man! Sincerely, JayM
PS2MirXas: Yep, posting "they work" is really helpful...
Bug!
Hey Olivier,
I just downloaded your recovery from hubdroid.It came in a .tar folder which is quite amusing. Then I extracted the recovery.IMG from the .tar folder .I used both flashify and rashr to try flashing.It said success but when I rebooted into recovery it said no command ! I did reboot the system. But please help me onto this matter.
Need help for my lenovo Ideatab A3000 bootloop
Here's the whole story , I need to change build.prop to get apps for my tab that is not compatible . now I changed it using Es Explorer and i'm rooted I changed the Device model and brand something like that . then I read on the net that after changing build.prop reboot your device . Now i reboot my device then the whole lenovo logo goes landscape the boom I'm STUCKED! NOOO IM BOOT LOOP. Now for the most Easies way to do is to APPLY UPDATE FROM SD CARD . The question is Can someone give me the ZIP FILE like I just download it and put on my sd card then insert my sd card then Power + Volume up choose Recovery then "APPLY UPDATE FROM SD CARD" And just choose the Zip file. Please Help me Guys . THe only thing I changed is the build.prop I haven't changed the ROM . ONLY BUILD.PROP TO RECOVER!!
PLS.......
Will This work for lenovo B8000-H 4.4.2
this recovery working with lenovo a3300-hv?? tq.
Please update the download link for the recovery.
Says server not found.

Categories

Resources