I did something really dumb tonight. I was trying to flash CM12.1 on my note 4, and before I rebooted the phone, a prompt came up which asked if I wanted to root the phone. Since my phone was already rooted with the stock software I had before, and because I wanted to keep my phone rooted, I selected yes.
Big mistake! My phone then shut off and now won't turn back on. I guess what ended up happening is the phone was trying to read a file that wasn't there (since I already clean flashed CM12.1 on the phone), and subsequently caused it to brick. I don't know what I was thinking by selecting yes. Very stupid of me.
Anyways, I figure if I can get a debrick file and put it on an SD card, I should be able to frankenstein my phone back from the dead. I've done it before in the past with a Samsung Galaxy S3, so I know it's possible. I've scoured google for a debrick file for the T-Mobile variant (N910T), and I've come up with nothing so far. If anyone knows of a debrick file that exists for the T-Mobile Note 4, or can provide me with one, I would really appreciate it. Thanks!
Your phone won't even go into download mode?
mandrewhammer said:
I did something really dumb tonight. I was trying to flash CM12.1 on my note 4, and before I rebooted the phone, a prompt came up which asked if I wanted to root the phone. Since my phone was already rooted with the stock software I had before, and because I wanted to keep my phone rooted, I selected yes.
Big mistake! My phone then shut off and now won't turn back on. I guess what ended up happening is the phone was trying to read a file that wasn't there (since I already clean flashed CM12.1 on the phone), and subsequently caused it to brick. I don't know what I was thinking by selecting yes. Very stupid of me.
Anyways, I figure if I can get a debrick file and put it on an SD card, I should be able to frankenstein my phone back from the dead. I've done it before in the past with a Samsung Galaxy S3, so I know it's possible. I've scoured google for a debrick file for the T-Mobile variant (N910T), and I've come up with nothing so far. If anyone knows of a debrick file that exists for the T-Mobile Note 4, or can provide me with one, I would really appreciate it. Thanks!
Click to expand...
Click to collapse
try flash a stok rom with odin ?
Στάλθηκε από το SM-N910F μου χρησιμοποιώντας Tapatalk 2
mandrewhammer said:
I did something really dumb tonight. I was trying to flash CM12.1 on my note 4, and before I rebooted the phone, a prompt came up which asked if I wanted to root the phone. Since my phone was already rooted with the stock software I had before, and because I wanted to keep my phone rooted, I selected yes.
Big mistake! My phone then shut off and now won't turn back on. I guess what ended up happening is the phone was trying to read a file that wasn't there (since I already clean flashed CM12.1 on the phone), and subsequently caused it to brick. I don't know what I was thinking by selecting yes. Very stupid of me.
Anyways, I figure if I can get a debrick file and put it on an SD card, I should be able to frankenstein my phone back from the dead. I've done it before in the past with a Samsung Galaxy S3, so I know it's possible. I've scoured google for a debrick file for the T-Mobile variant (N910T), and I've come up with nothing so far. If anyone knows of a debrick file that exists for the T-Mobile Note 4, or can provide me with one, I would really appreciate it. Thanks!
Click to expand...
Click to collapse
hi there ... did you ever get one of these? I need a debrick file too for my Note 4!
I have a thread with a file, that if someone with the COD6 bootloader will run and upload the results that will fix my device and any others on the COD6 bootloader.
Just run this Unbrick Image Creator in recovery & it'll create "/sdcard/Unbrick_Files" in your internal SD card.
Click to expand...
Click to collapse
If someone could upload the results and post a link that would be a massive help.
If you can get to download mode, you can fix this issue. Odin back to stock!
---------- Post added at 07:56 AM ---------- Previous post was at 07:53 AM ----------
DarkStarr said:
I have a thread with a file, that if someone with the COD6 bootloader will run and upload the results that will fix my device and any others on the COD6 bootloader.
If someone could upload the results and post a link that would be a massive help.
Click to expand...
Click to collapse
Is there a thread for this disk image fix? I can not find it. I want to see how this is being done. Thanks
AxAtAx said:
If you can get to download mode, you can fix this issue. Odin back to stock!
---------- Post added at 07:56 AM ---------- Previous post was at 07:53 AM ----------
Is there a thread for this disk image fix? I can not find it. I want to see how this is being done. Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/not...hard-brick-t3132449/post61281851#post61281851
Now it didn't work for me but the phone was trying to do something. I think something more than just software was damaged.
Try to find a stock service images for your note to flash with Odin. These service images are separated files that you put in Odin in PIT BL AP CP. Also I would suggest that you try it first with KK rather than lollipop.
please i need the unbrick image for the note 4 sm-n910a for at&t. please if you have the note 4 ,do the file and send me to [email protected] .
the link of my bootloader : http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
the link of the method: http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
the pit link: http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
please help! scuse my english
thank
Related
HOW TO UNBRICK:
Debrick.img:
Courtesy of @jtl999 https://mega.co.nz/#!xZxBwRDa!HupJL9sNXANhTk3Dl1IJslT6NmfZMqwV4kNFNV25Fhc
Courtesy of @turilo https://drive.google.com/file/d/0Bx0cWHq6jupFcUZMNnh3b2JkQjA/edit?usp=sharing (This zip contains TWO IMG files. Just use ONE..)
UNBRICK METHOD:
Following directions taken and modified from: http://forum.xda-developers.com/showthread.php?t=2583603
Part 1: What you need
A SD Card that is the Same Size as your Phone's internal memory.
The unbrick image as above
A program to put the image on a SD Card which is here for windows users: http://sourceforge.net/projects/win32diskimager
The Stock ROM. I got mine here. http://samsung-updates.com/device/?id=SM-N900W8
ODIN 3.0x
Part 2: Prep
Get the battery charged to 100%.
Find a PC and plug the powercord (microUSB Cord) directly into the motherboard. NOT ANY OTHER PORT.
Format the SD Card to ExFAT you need from Part 1.1.
Using the #3 Program from Part 1.3, burn the image to the SD Card. Its simple.
Part 3: Turn it on
Put the battery into the phone.
Plug the charging cord into the phone.
Put the phone into download mode by holding: <Volume Down> + <Home Button> + <Power>
Once you are in download mode press <Volume Up> to enter download mode. Now go to part 4
Part 4: Putting the ROM back on
Don't Deviate from anything here or do extras.
Open Odin from Part 1.5.
Press PDA and Select your STOCK ROM from Part 1.4
Wait a min for Odin to analyze the file.
Hit Start on Odin.
Click to expand...
Click to collapse
MY OP:
SaHiLzZ said:
Hello,
I am in URGENT need of someone who can help me with an UNBRICK img. You should be on stock and/or rooted firmware, but not on leaked TW KitKat bootloader. Please flash the following two files here in custom recovery:
http://forum.xda-developers.com/attachment.php?attachmentid=2540537&d=1390754238
and http://shabbypenguin.com/getdownload.php?file=Tools/Unbrick-Creator.zip
This will NOT flash anything on your device, but it will create a debrick.img file, and Debrick folder. This does NOT contain any sensitive IMEI or anything like that information. Please either PM me directly, or post it here. I will appreciate it greatly.
Trying to follow the Note 3 unbrick threads, and in need of one now..
Unbricking on Note 3..
http://forum.xda-developers.com/showthread.php?t=2625332
http://forum.xda-developers.com/showthread.php?t=2531224
Click to expand...
Click to collapse
SaHiLzZ said:
Hello,
I am in URGENT need of someone who can help me with an UNBRICK img. You should be on stock and/or rooted firmware, but not on leaked TW KitKat bootloader. Please flash the following two files here in custom recovery:
http://forum.xda-developers.com/attachment.php?attachmentid=2540537&d=1390754238
and http://shabbypenguin.com/getdownload.php?file=Tools/Unbrick-Creator.zip
This will NOT flash anything on your device, but it will create a debrick.img file, and Debrick folder. This does NOT contain any sensitive IMEI or anything like that information. Please either PM me directly, or post it here. I will appreciate it greatly.
Trying to follow the Note 3 unbrick threads, and in need of one now..
Unbricking on Note 3..
http://forum.xda-developers.com/showthread.php?t=2625332
http://forum.xda-developers.com/showthread.php?t=2531224
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403
try this one this is for 4.3 looks like the one you tried are for 4.4.2
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2507403
try this one this is for 4.3 looks like the one you tried are for 4.4.2
Click to expand...
Click to collapse
You may want to realize the difference between a EFS-based bootloop, versus what I am looking for after a hard brick.
But thank you for your input.
How did you brick it? - Reason I ask, is cause the w8 is downgradable from 4.4.2 so bootloader playing should not have affected you. Unless you flashed something on it you shouldn't have?
Its not mine, but for someone else who asked me to help. I am not sure how it was bricked. Regardless it is a hard brick..
Bump
sent from my mobile device
SaHiLzZ said:
Bump
sent from my mobile device
Click to expand...
Click to collapse
Unfortunately I can't help on the W8, but have you tried any other note 3 debrick image? Any difference with that?
I have the n900w8 but currently on leaked 4.4.2 kk. I will downgrade and flash the 2 files and see if I can help you out..
EDIT: I have created the N900W8 Canada debrick.img
Uploading now.
---------- Post added at 01:53 PM ---------- Previous post was at 01:51 PM ----------
Try this.
https://mega.co.nz/#!xZxBwRDa!HupJL9sNXANhTk3Dl1IJslT6NmfZMqwV4kNFNV25Fhc
It sure is fun uploading at over 900KB/ps on Telus DSL
here is the N900W8 Canada latest 4.3 Mj4 debrick.img https://drive.google.com/file/d/0Bx0cWHq6jupFcUZMNnh3b2JkQjA/edit?usp=sharing :good::good:
Much appreciated
sent from my mobile device
SaHiLzZ said:
Much appreciated
sent from my mobile device
Click to expand...
Click to collapse
very welcome, Thanks button be greatly appreciated also
Absolutely will do when I'm on a computer. Xda doesn't let me do that out select the lay post of a page!
sent from my mobile device
Also which zip did you flash to create this file?
sent from my mobile device
SaHiLzZ said:
Also which zip did you flash to create this file?
sent from my mobile device
Click to expand...
Click to collapse
Like I just messaged you Shabby's Unbrick_Creator.zip
Hello i'm about to perform this method..Just wanted to confirm with someone that I can use any of the debrick.img provided for version 4.4.2 on my w8. Thanks! I hope to god this works!
Just and FYI -
You don't mention it in the steps about actually putting the sdcard with the unbrick image into the phone again. I assume at or after 3.3 .
Unbelievable ! This worked for me as well. This feature of the Note 3 makes it tinkerer's dream, it makes it virtually brick-proof. I thought I was done when I could not get back to download mode. I was starting to plan out what I was going to do for my next phone.
By the way in my case it was a N900W8 from Puerto Rico. I purchased it locked to Clairo and unlocked it and flashed to Telus stock ROM. If anyone else has gone this route this method works to unbrick. At first it would not go into download, I had to pull the battery and let it sit for a day. The next day I put in a fresh battery and it booted right to the download selector screen. WAhooo! ...and I was off to the races. Much thanks to the OP and the OOP for this solution.
FYI - formatting the sdcard with the boot recovery partition makes it unusable in the state. Just reformat it again to Fat32 and you can use it as a sdcard again. If you have trouble formatting it I used Mini Tools Partition Wizard, it does the trick.
Alawishis said:
Unbelievable ! This worked for me as well. This feature of the Note 3 makes it tinkerer's dream, it makes it virtually brick-proof. I thought I was done when I could not get back to download mode. I was starting to plan out what I was going to do for my next phone.
By the way in my case it was a N900W8 from Puerto Rico. I purchased it locked to Clairo and unlocked it and flashed to Telus stock ROM. If anyone else has gone this route this method works to unbrick. At first it would not go into download, I had to pull the battery and let it sit for a day. The next day I put in a fresh battery and it booted right to the download selector screen. WAhooo! ...and I was off to the races. Much thanks to the OP and the OOP for this solution.
FYI - formatting the sdcard with the boot recovery partition makes it unusable in the state. Just reformat it again to Fat32 and you can use it as a sdcard again. If you have trouble formatting it I used Mini Tools Partition Wizard, it does the trick.
Click to expand...
Click to collapse
Hey friend, Can you please explain me what's the procedure in your FYI? and also, has your phone been working correctly since then? Do I have to keep the debrick.IMG for ever on my SD card? What do you mean by boot recovery partition?
Thanks in advance
Do u have a debrick for lollipop. Pls help
Hi, I'm stupid and bricked my phone.
I had rooted almost immediately after getting my phone, AT&T SM-G900A, and had no problems.
Used FlashFire to apply the 5.0 pre-rooted stock rom (OC4), and had no problems.
Decided today to use SuperSU's "Full Unroot" function, rebooted, and now I can't get past the AT&T logo on boot. And apparently even after that the phone is still rooted.
Tried the G900AUCU3BOC4-OneClick.exe Odin flasher, but it fails and I get "sw rev check fail [aboot]: fused 4 > binary 3" which from what I understand means I am trying to install a rom version that is older than the one I currently have.
Looked on the internet to see if there is any Odin-compatible tar.md5 file for the newer versions, hoping one of those would let me update. However, I can only find .zip files made by muniz_ri. Tried copying those to my microSD card and install through recovery, but it fails with "invalid header". It looks like those zip files only work with FlashFire, which I can't even get to anymore because I can't boot.
Is there a floating copy of one of the newer stock roms (can be unrooted, I don't care) that I can flash with Odin? Or is there another secret I am missing? I have been through dozens of threads here on the forums and they all seem to have a solution that just give me any results.
Thanks for any help!
I have the same issue, did you fix it somehow?
KhaosAnimeX said:
I have the same issue, did you fix it somehow?
Click to expand...
Click to collapse
i've the same problem... did you 2 had any luck?
This might be you solution:
http://forum.xda-developers.com/att...cu4bof3-odin-tar-files-t3246906?goto=newpost/
DanteGG said:
This might be you solution:
http://forum.xda-developers.com/att...cu4bof3-odin-tar-files-t3246906?goto=newpost/
Click to expand...
Click to collapse
i'll try it, thanks!
edit: worked!!!!!!!!!!!!!!!!! thanks
calculuschild said:
Hi, I'm stupid and bricked my phone.
I had rooted almost immediately after getting my phone, AT&T SM-G900A, and had no problems.
Used FlashFire to apply the 5.0 pre-rooted stock rom (OC4), and had no problems.
Decided today to use SuperSU's "Full Unroot" function, rebooted, and now I can't get past the AT&T logo on boot. And apparently even after that the phone is still rooted.
Tried the G900AUCU3BOC4-OneClick.exe Odin flasher, but it fails and I get "sw rev check fail [aboot]: fused 4 > binary 3" which from what I understand means I am trying to install a rom version that is older than the one I currently have.
Looked on the internet to see if there is any Odin-compatible tar.md5 file for the newer versions, hoping one of those would let me update. However, I can only find .zip files made by muniz_ri. Tried copying those to my microSD card and install through recovery, but it fails with "invalid header". It looks like those zip files only work with FlashFire, which I can't even get to anymore because I can't boot.
Is there a floating copy of one of the newer stock roms (can be unrooted, I don't care) that I can flash with Odin? Or is there another secret I am missing? I have been through dozens of threads here on the forums and they all seem to have a solution that just give me any results.
Thanks for any help!
Click to expand...
Click to collapse
Hello!
Did you fix your s5? I'm having the same issue with mine. I can't find the G900AUCU4BOF2 I'm scared to flash via odin any other old firmware.
Thanks
Sent from my SM-N910V using XDA-Developers mobile app
Download stock firmware for your device and flash it via odin.. everything will get back to normal
mumo24 said:
i'll try it, thanks!
edit: worked!!!!!!!!!!!!!!!!! thanks
Click to expand...
Click to collapse
Hello there!
Where can i get the link to the stock G900AUCU4BOF2?i noticed that you fix yours.
Thanks
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
brave nathanael said:
Download stock firmware for your device and flash it via odin.. everything will get back to normal
Click to expand...
Click to collapse
Stock Rom for G900AUCU4BOF2 5.0 does not exist yet,just G900AUCU1ANCE 4.4.2 Im afraid to brick my phone if I downgrade.having a hard time to find it
osk4rin said:
Hello there!
Where can i get the link to the stock G900AUCU4BOF2?i noticed that you fix yours.
Thanks
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Stock Rom for G900AUCU4BOF2 5.0 does not exist yet,just G900AUCU1ANCE 4.4.2 Im afraid to brick my phone if I downgrade.having a hard time to find it
Click to expand...
Click to collapse
Hello, try looking for G900A_OF2_Stock_Rooted_Rom.zip I think that is the file you are looking for. In case you dont find it I could upload it.
(I guess that was the file I used, downloaded a lot of ROMs that time)
So my s5 g900v hardbricked. I've seen multiple threads on the subject at this site, but none have linked a debrick.img for 5.0(lollipop). If anyone has one i would be grateful.
Debrick image only works if it is exact. What firmware? What bootloader?
Example : PB1, Latest (Locked)
QT_BULK occurs in device I assume? If not, not hardbricked.
smokerbond said:
Debrick image only works if it is exact. What firmware? What bootloader?
Example : PB1, Latest (Locked)
QT_BULK occurs in device I assume? If not, not hardbricked.
Click to expand...
Click to collapse
Yeah, qt_bulk.
Unfortunately, i don't know the firmware/bootloader. It just bricked on me back in March.
Going by sammobile's database, it could be BOG5, BOK3, or BPB1
evmftw said:
Yeah, qt_bulk.
Unfortunately, i don't know the firmware/bootloader. It just bricked on me back in March.
Going by sammobile's database, it could be BOG5, BOK3, or BPB1
Click to expand...
Click to collapse
I'm making an OG5 debrick image for myself and will happily share with you
---------- Post added at 07:43 PM ---------- Previous post was at 07:29 PM ----------
Alright here you go this is my unbrick image made from my G900V:
https://www.androidfilehost.com/?fid=24545065934258334
Anyone have a PB1 Locked bootloader G900V Unbrick.img?
leotakacs said:
Anyone have a PB1 Locked bootloader G900V Unbrick.img?
Click to expand...
Click to collapse
http://forum.xda-developers.com/ver...brick-images-hardbrick-recovery-plan-t3387010
second post
Lightn1ng said:
I'm making an OG5 debrick image for myself and will happily share with you
---------- Post added at 07:43 PM ---------- Previous post was at 07:29 PM ----------
Alright here you go this is my unbrick image made from my G900V:
https://www.androidfilehost.com/?fid=24545065934258334
Click to expand...
Click to collapse
Is this definitely OG5? Not working on an OG5 brick
Edit: The PB1 img worked for me
G900v Hardbricked
Stock, standard S5 G900v. Started Occasionally giving error msg "System Service is not responding".
Googled this & found a common cause is an almost full SD card. Had a 2 gig card almost full, replaced with a 16 gig card, phone started constantly rebooting to splash screen, phone is now Hardbricked. How can I tell which bootloader & firmware are/were on the phone? As I stated, never rooted, took all ota updates, etc. device is recognized by my PC as Quallcom HS-USB QD Loader 9008. Thanks in advance for any/all advice.
Update: I found the original box from the phone & the SW version printed on the box ends in PF4 . Anyone have an unbrick image for this?
hello got a verizon s5 to fix from a friend. it was showing secure modem fail please connect to verizon upgrade software to fix. I did try to connect with the stated software but it didn't connect to the phone. i therefore went and flash the latest firmware for the device. upon flashing the software, the same secure modem fail connect to verizon upgrade software. i tried again to flash over firmware..this time i was succesful, but then i was waiting on the verizon logo for 20 full minutes... i pulled the battery out. thinking it got stuck. now the phone is hard brick blank screen no light no charging. i tried looking for a debrick image for G900VVRU2DQL1_G900VVZW2DQL1_G900VVRU2DQL1 firmware but no joy... is there anything i can do to revive this phone? it shows up as qusb_bulk in device manager and says device driver not succesfully installed. please help..thanks..using windows 7 on a mac. thanks
SPANISH2 said:
hello got a verizon s5 to fix from a friend. it was showing secure modem fail please connect to verizon upgrade software to fix. I did try to connect with the stated software but it didn't connect to the phone. i therefore went and flash the latest firmware for the device. upon flashing the software, the same secure modem fail connect to verizon upgrade software. i tried again to flash over firmware..this time i was succesful, but then i was waiting on the verizon logo for 20 full minutes... i pulled the battery out. thinking it got stuck. now the phone is hard brick blank screen no light no charging. i tried looking for a debrick image for G900VVRU2DQL1_G900VVZW2DQL1_G900VVRU2DQL1 firmware but no joy... is there anything i can do to revive this phone? it shows up as qusb_bulk in device manager and says device driver not succesfully installed. please help..thanks..using windows 7 on a mac. thanks
Click to expand...
Click to collapse
Technically any 6.0 debrick image should work. For s***s and giggles, you could even try the PB1 img posted earlier - it's also bootloader revision 2, so it theoretically might work. Really, you just need the img to get you back to a working Download mode so you can flash firmware again. If it doesn't work, I'd recommend looking on eBay for an S5 from a seller that accepts returns. Root it, create the img yourself (instructions are here on XDA), and then return the phone
iBowToAndroid said:
Technically any 6.0 debrick image should work. For s***s and giggles, you could even try the PB1 img posted earlier - it's also bootloader revision 2, so it theoretically might work. Really, you just need the img to get you back to a working Download mode so you can flash firmware again. If it doesn't work, I'd recommend looking on eBay for an S5 from a seller that accepts returns. Root it, create the img yourself (instructions are here on XDA), and then return the phone
Click to expand...
Click to collapse
ok thanks much....tried the PB1 image but no download mode using a class 10 32gb microsd card
SPANISH2 said:
ok thanks much....tried the PB1 image but no download mode using a class 10 32gb microsd card
Click to expand...
Click to collapse
You did actually burn/write it to the card, correct? You didn't just simply transfer the Img to the card storage?
QL1 firmware verizon s5 debrick image if anyone can create or send me that would be great.
iBowToAndroid said:
You did actually burn/write it to the card, correct? You didn't just simply transfer the Img to the card storage?
Click to expand...
Click to collapse
Yes i did...using the win32 burner
I flashed my note 4 n910f BOG with the Kyubi ROM Port N5 ( http://forum.xda-developers.com/note-4/snapdragon-dev/kyubi-rom-port-n5-n910f-coj3-v5-t3254964 ) using odin but after that my note 4 starts to lag and reboot several times so i wanted to reflash it with the stock rom 5.1.1 BOG found in sammobile but even after that my note 4 lags a lot and reboots by itself and one day it stops and never boot at first I though that my motherboard was bricked but when i plug it to PC it shows that there is a RELINK HS-USB QDLoader 9008 mounted under Ports (COM and LPT) in device manager.
I need a debrick.img for my N910F to resolve this problem using an SD card 32gb.
Please help.:crying::crying::crying::crying::crying::crying:
Brother did u find anything i have the same problem i was looking for a month and i didnt find anything !
I have the same thing, the exact same thing since a couple of weeks and cant find a solution. All i get is mmc read error. Cant flash a stock rom either. Some help would be appriciated.
Thanks in advance
TheOne741 said:
I have the same thing, the exact same thing since a couple of weeks and cant find a solution. All i get is mmc read error. Cant flash a stock rom either. Some help would be appriciated.
Thanks in advance
Click to expand...
Click to collapse
A friend come to me with a note 4 exactly like your with emmc read error. I tried flashing stock rom but no result. After that i flashed stock rom 4 files version with PIT and repartition ... but nothing. The trick with what i succeded was to flash stock rom with odin 3.10.6 and when the flashing process starts just tap the screen from 10 to 10 seconds until the process succeded. I know it seems stupid but this saved the phone. Homewer after 3 weeks my friend called me and said that the phone completly died. And one more tip, remove and put back battery between each attemp to flash stock rom with odin.
I think this can help us... Just take the bootloader from here and the pit and guide from attachments and try it. it may save your phones.
One more thing.. Here are the .SDC files for direct sdcard boot repair. So choose what sdc you need and try to flash.
The flash procedure is this:
1.Put the .SDC file to your sdcard (sdcard must be formated as FAT32 and must be SDHC max 16GB)
2.On the phone press VOLUME DOWN + HOME + POWER
3.If all is ok the phone will display SDCARD MODE and will try to flash the phone with the file provided to sdcard
4. IF the process went ok now you have to flash the phone with odin and stock rom.
If the phone didnt boot to SDCARD Mode you will need a USB JIG that you can buy from ebay or somewhere else...
I hope this help you.
http://forum.xda-developers.com/note-4/help/hard-bricked-note-4-sm-n910f-qualcomm-t3393104
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
The only way is that file I shared or a USB JIG.
Thank you all for your help. Today i delivered my phone to samsung for repairs in the hope that it has warrantee. Will hear from them within 2 weeks. If they wont repair within warranty i will try this. Keeping my fingers crossed.
Sent from my iPhone using Tapatalk
Maybe someone knows more than i do. Will my custom rom flashing behavior affect the longevity of my beloved phones motherboard? I tend to do that a lot. I come from an HTC where there is no lock in the boot-loader anymore and am affraid that my flashing frenzy might have broken my phone. It shouldn't play a role, should it?
scamex said:
One more thing.. Here are the .SDC files for direct sdcard boot repair. So choose what sdc you need and try to flash.
The flash procedure is this:
1.Put the .SDC file to your sdcard (sdcard must be formated as FAT32 and must be SDHC max 16GB)
2.On the phone press VOLUME DOWN + HOME + POWER
3.If all is ok the phone will display SDCARD MODE and will try to flash the phone with the file provided to sdcard
4. IF the process went ok now you have to flash the phone with odin and stock rom.
If the phone didnt boot to SDCARD Mode you will need a USB JIG that you can buy from ebay or somewhere else...
I hope this help you.
Click to expand...
Click to collapse
Do I need to burn it on SD card or just copy it and what software should I use ?
heeelp
IronDrass said:
Do I need to burn it on SD card or just copy it and what software should I use ?
Click to expand...
Click to collapse
very good question
ill try both methods ann then tell you
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
good question
i dont eaven know how to flash it
IronDrass said:
Do I need to burn it on SD card or just copy it and what software should I use ?
Click to expand...
Click to collapse
Copy paste !
i tried both methods
neither worked for me
plus my note 4 got bricked while updateting from 5.0.1 to 6.0.1
and it has 32 gb
th file says 4.4.4 16 gb
are you sure it is the right files ?
ps im about to go to a guy wohs gonna let me try to flash the bootloader and the pid file to my sd with his working note 4
if i can ill upload the sd contant up for every body
ladres said:
i tried both methods
neither worked for me
plus my note 4 got bricked while updateting from 5.0.1 to 6.0.1
and it has 32 gb
th file says 4.4.4 16 gb
are you sure it is the right files ?
ps im about to go to a guy wohs gonna let me try to flash the bootloader and the pid file to my sd with his working note 4
if i can ill upload the sd contant up for every body
Click to expand...
Click to collapse
Did you found a solution for your Note
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Could you elaborate on how you did this?
Also, can you upload the content on the SD if you can?
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Also, if you can, Download this, install it, connect the SD Card to PC directly, choose the drive on which the SD is mounted in the "Device" option and click on "Read". It will create an img file which I can then write onto my sd card. If you can do this, it'd be a big help
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Please share those files and the method used!
I've had these same kind of symptoms for a few weeks. Then I flashed Debloated ROM v5 and got Wake lock app from the Google play and while maybr this is a work around, my phone has been flawless ever since wake lock was installed. Flashing didn't cause any problems.
ga4a89 said:
I've had these same kind of symptoms for a few weeks. Then I flashed Debloated ROM v5 and got Wake lock app from the Google play and while maybr this is a work around, my phone has been flawless ever since wake lock was installed. Flashing didn't cause any problems.
Click to expand...
Click to collapse
Bro, we're talking about hard-bricked devices. No power, no recovery, no download mode. How are we supposed to flash your ROM?
What we are looking for is a fix for hard-bricked N910F. Do you have it?
scamex said:
Copy paste !
Click to expand...
Click to collapse
Copy-paste won't work because SDC files are dedicated for ATF box and related ATF software. Don't waste our time.
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
JeepinxJosh said:
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes, quite afew times
will this work for Virgin mobile as well? I haven 't had a need yet...but knowing meeee...eventually.
Worked for my VM version of the phone. I think the phone sets itself from the network(Sprint, Boost, Virgin) when you activate it.
Very well ,Confirmed Works on boost mobile only method. helps me get off or bypass screen massage Blocked by FRP ,flashed with Odin thanks
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
still getting error
XxTeXx07xX said:
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Does anyone knows if it's possible to unlock it with Z3X?
The extra csc file or the other so file named home-ap
AtlasTheGod said:
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Click to expand...
Click to collapse
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
I have followed all steps. I am using the J727p for boost. It turned on loaded up normally for me then when I restarted the phone it is now stuck in a boot load it gets to the Samsung screen then shuts off and repeats.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
What build were you on when flashed it ???
If you were on J727PVPU2AQI3 YOUR STUCK TILL YOU GET THE NEW FIRMWARE FILE !!
JUSMEJOSE said:
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Click to expand...
Click to collapse
this fixed my blinking:
rpmb provisioned ...pink
rpmb fuse: 1 ...yellow
recovery booting ...blue
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Galaxy J727P
spc_hicks09 said:
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Click to expand...
Click to collapse
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Thank you, I will try them now and see what happens.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
Anyone have any luck with these? I'd really like to bypass frp on this
spc_hicks09 said:
Thank you, I will try them now and see what happens.
Click to expand...
Click to collapse
So do you have any luck? trying to get stock firmware on my device to bypass FRP boot.img error
Almost bricked...and then this post saved my friggin day!
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
J727P
ListlessSpectre said:
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
You may want to look at this link if you haven't already the last Rom there is my daily drive but you should read threw it let me know if you need any help !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse