Unbrick lg g3 qhsusb_bulk, qualcomm 9008 workking 100% by board ver 2.9a - G3 General

How to Fix "error device not found in dload trying flash programmer" when use boardiag .
Lg g3 qualcomm 9008 when install driver then use tool boardiag fake tool say device not found in dload trying flash programmer
when you use tool fake board share in xda another tool say device not found in dload trying flash programmer. You need remove battery (of lg g2 hold power 1 minute) then connect cable again and use tool again
Sure install driver 100% wrong
With windowns 64 bit you need restart pc then click f8 choose disbable driver singturne....
Then remove battery (hold power 1 minute with lg g2) then connect cable try use tool unbrick >> sure done 100%
I will updload video error dload
Remember disbbale tool sony erricson if you have open tool in taskbar
How to fix “No response from the device. Check PMIC first and
if still boot problem, replace AP.”
Remove battery and connect again put qualcomm 9008 then use tool in topic
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-all-variants/​ Just as helping
[*]I see very topic unbrick qualcomm 9008 lg g2, lg g3 but all tool can not use.
I have full tool board ver 2.9.( only 2.9).
Link download drive.google.xxx /file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view?usp=sharing (xxx= com)
Support lg g2, lg g3 workking 100%.
Download tool, open BoardDiag and choose file tot correct model phone of you( you can download tot in xda)
See guide in pictrure : very easy.
Note
Hold power 2 minute and connect cable ( or remove battery)>>And open tool check ap, emmc test again
Then unbrick done remove cable, hold power 30 second and hold volume up connect cable phone put downloadmod >> Use lgflashtool 1.5 flash file tot again >> done.
If done pls donate a few beers paypal of my Thank you very much.​

Man you saved my ass Thank you so much !1 when i get my salary ill donate to you and tell everybody to do so cuz this tool is amazing. im in download mode now ill try to flash with lg flash tool.

Thank so much man but my g3 last week unbrick qualcomm i had I submit for warranty[emoji24] [emoji24] I am very Star-crossed [emoji20]

Hello friend willcracker
Hello friend willcracker :good:
I hope all is well;
I saw this little tutorial so I want to ask for help
I have a LG G3 D855p and my phone is dead (bricked)
I can not quite understand the method you friend
not turn on my phone
I can not enter the "" Download Mode ""
VOL + Up when I connect the USB cable to the PC recognizes me as:
Qualcomm HS-USB QDLoader 9008 (COM10)
why I ask for help to revive my g3
If you help me ... .. I promise to donate something for you
you send a file "picture" attached
- - As I can get to "" Fastboot Mode "" on my phone
I hope your prompt response, please do not ignore my message :crying:
greetings from peru

You need to Disassemble Phone and Expose the TP Location
See pictrue
Expose the TP Location.
Done phone put qualcom 9008>> use tool unbrick
Remeber unplug battery connect only cable and short testpoint

Thanks for responding, but I need your help please friend
Hello willcracker I have no such tool you indicate "tool unbrick testpoint"
I could do this step with some type of cable or wire?
- If you Might tell me how to do that step with another option
leave your email. to chat google chat (Houngts) and you help me please
I'm worried because my g3 d855p not light, or anything like I said ....
await your prompt response, I hope you can help me

TOT Firmware, must match installed version?
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
Lollipop was installed, goal was to move to a custom rom (blisspop v2.3)
Rooting was successful
Install of twrp not, reboot into recovery caused the 'signature verification error'
Tried to flash the kitkat rom via the download method, failed, ...
Currently, I have the same verification error also when trying to get into download mode and have the Qualcomm HS-USB QDLoader 9008 in my device manager.
I have the LGD855AT-00-V10e-EUR-XX-JUL-08-2014-16G+0.tot file and did the first step of your procedure. Can I do the second step with this extract of kitkat even if lollipop was installed?
any feedback greatly appreciated!

Hello willcracker thanks, thanks for reply but I need your help please
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru

themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
Greetings from Peru
Click to expand...
Click to collapse
NO you need find google how do short testpoint samsung n7100 you see they guide short testpoint . Lg when short testpoint phone detect qualcomm 9008
And you use tool board diag unbrick.

???
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
Click to expand...
Click to collapse
I'm in the same boat! Could you please explain it a little better?

frank.devliegher said:
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
any feedback greatly appreciated!
Click to expand...
Click to collapse
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another

Ahh now i see!
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?

@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first

sourly64 said:
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
Click to expand...
Click to collapse
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.

Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
Model Lg d851? writh
rememer ber tool suppoer only lg g3 f400s/l/k , lg d855 16gb and 32gb.
If use tool say error pcmic on tool not support (Ex: lg d851)
I up load only msm8974ac g3 msm8975ac g3 no upload

Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
It seems won't work.I have gone through about this problem.Alway AP Check fail.QPST reported that phone had been in Sahara download mode for few seconds.A RMA fix my phone.But it cost me about 50dollars

willcracker said:
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Click to expand...
Click to collapse
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP

TOT Version
willcracker said:
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Click to expand...
Click to collapse
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!

frank.devliegher said:
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
Click to expand...
Click to collapse
YES you can use tot kikat unbrick .

sourly64 said:
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
Click to expand...
Click to collapse
sr i have not upload hex lg gpro waitting comming soon.

Related

Bricked G2, hardly bricked ...

Hi everyone,
I ****ed up, i know... i had some problems with my G2, the last restauration was with : Europe OPEN D80220H_00.kdz
But i clicked by accident on a buttom from a program saying "fix the partitions problems", after that, the G2 crashed and black screen.
The phone was lighting and i saw everypartitions when it was plugued on my computer, but asking for a format on each partition. so i decided to use this :
http://forum.xda-developers.com/showthread.php?t=2582142
But i ****ed up again and i think it's because i used the wrong files, i used : BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G.zip (i don't know if it's because of that ? )
after that, the phone isn't reconized at all from windows and ubuntu... the drivers can't be reconized
I can't see any partition now, so i can't do it again. I don't know what to do now.
I fount another tutorial for extract every img files from my own kdz : "Europe OPEN D80220H_00.kdz" but i can't put them on the phone anymore.
Version : Europe OPEN D80220H_00.kdz
Tel : LG G2 D802 32G Blanc
Thanks in advance !
i'm not able to understand if it is QH USB 9006 or 9008 - you should try contacting member "tungkick" on this forum
sandys1 said:
i'm not able to understand if it is QH USB 9006 or 9008 - you should try contacting member "tungkick" on this forum
Click to expand...
Click to collapse
why ? he will be able to help me ?
Will try, thanks !
Something new :
I have finally set my phone on "download mode" EVEN IF my screen is always black so i dont see ANYTHING on the screen. But i just know that he is really download mode cause i press "top buttom" during puting my usb cable and the connection is faster.
BUT, i tried to use the LGFlashTool (with the tuto) and it says some error "EMEI" and "PID" NULL.
So the program doesn't want to continue :/

[Q] LG G2 Bricked!

I tryed to update my d802 G2 to lolipop it all went good but after the update finished the phone found on usb like LGE mobile usb serial port on com port and some other drivers but stuck in flashing led and LG logo...
when holding the power button plus volume up it says download mode but pc doesnt detect anything hard reset was also freezing..
so i downloaded tot file extact it tryed to flash with several tools and guides i found here no luck...i forced it into Qhusb_bulk and used some cmd tool to push images from the tot file i extracterd now....phone still no download mode(says download but not detectable on pc)
the hard reset goes well now the phone restarts everything normal still on LG logo but no flashing led...and found on usb like LGE usb serial port.
and now when i try to force it into Qhusb i get qdloader 9008. after instaling the driver...before i saw many hdd and partitions.
any help is apriciated...
aleannes said:
srk tools 2.1 repara os arquivos
Click to expand...
Click to collapse
ENGLISH IS THE PRIMARY LANGUAGE HERE. this is the second post you have made in a different language
Kindly follow the FORUM rules.
I've used tools srk
SREEPRAJAY said:
ENGLISH IS THE PRIMARY LANGUAGE HERE. this is the second post you have made in a different language
Kindly follow the FORUM rules.
Click to expand...
Click to collapse
excuse me for writing in Portuguese, Srk tools repairs files.

[Q] DemiGod Crash Handler: Critical Error

HELP! I tried to install 30B LPBootstack but after I re-enter recovery mode I got
Critical Error!
DemiGod Crash Handler : Critical Error!
Press Key to choose Dload Mode or Reboot.
1. Vol Up : Dload Mode
2. Vol Down : Reboot
If you choose Dload Mode
1. Dload Mode. Please connect USB
2. Get the ram dump image using QPST Configuration.
I can't access Download or Recovery mode because every time I try to access them I get stuck at this screen.
HELP!
SOLUTION
-SEARCH SRK TOOLS.
I found that my problem something with Qualcomm Qhsusb_bulk.
Srk tools was the only thin that helped my phone resurrect from the dead.
Attention!!!!
Please ignore now. I got my problem solved.
CooLoL1999 said:
Attention!!!!
Please ignore now. I got my problem solved.
Click to expand...
Click to collapse
...but you're going to post the solution as well, right?
Problem
CooLoL1999 said:
Attention!!!!
Please ignore now. I got my problem solved.
Click to expand...
Click to collapse
how?I have this problem. Please help!
I have the same problem, may i have the solution, please help
kongwong82 said:
I have the same problem, may i have the solution, please help
Click to expand...
Click to collapse
SRK Tools help you
L0nelyE4rth said:
SRK Tools help you
Click to expand...
Click to collapse
I tried to use this tool you mention but how can it solve the demigod error?
SRK says "waiting for device" and nothing happens after that. The PC doesn't recognize the phone
tommy paradise said:
I tried to use this tool you mention but how can it solve the demigod error?
SRK says "waiting for device" and nothing happens after that. The PC doesn't recognize the phone
Click to expand...
Click to collapse
Please go to tell him not me, I'm tester not dev
http://forum.xda-developers.com/showthread.php?t=2582142, might help you!!!
tommy paradise said:
I tried to use this tool you mention but how can it solve the demigod error?
SRK says "waiting for device" and nothing happens after that. The PC doesn't recognize the phone
Click to expand...
Click to collapse
Well bro I was stuck with the same issue..
This happens to me when i flashed a wrong twrp recovery for lg g2 d801 and it was stuck in critical error i was also unable to access download mode ..
But my Good luck was that i recovered it by doing silly thing ?
So i do following things. But make sure u know the corrert version of your lg g2 to flash kdz file with lg flash tool and also must have lg drivers intalled.
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode
I performed all this on lg g2 d801 but i hope u can try it on other varients as well. As i was scared of short circut method and srk tool didn't help..

[Help] No Way to Unbrick LG Leon LTE

Hi to all
I am wonder if there are ways to reflash the stock KDZ file since don't have fastboot, bootloader or even recovery, only black screen and a sort of com port recognized as RELINK-HS-USB like attached image.
I try with B2B program but, no support.
any solutions will be thanked, in case of fixed, will join development!
Have you tried LG Flash Tool 2014. Here is a webpage with all LG Leon 4G LTE firmware: http://lg-phone-firmware.com/index.php?id_mod=171
Here is a guide on how to download allow) for your phone (not recommended because your version may not be supported): http://forum.xda-developers.com/leon/how-to/how-to-update-lg-leon-h340n-to-android-t3393648
Here is a guide on how to install the original firmware for your phone(lollipop): http://forum.xda-developers.com/leon/how-to/helpful-guide-to-stock-t3211208
If you have any questions ask me, if you want, I hope I helped you
Nickblorck said:
Have you tried LG Flash Tool 2014. Here is a webpage with all LG Leon 4G LTE firmware: http://lg-phone-firmware.com/index.php?id_mod=171
Here is a guide on how to download allow) for your phone (not recommended because your version may not be supported): http://forum.xda-developers.com/leon/how-to/how-to-update-lg-leon-h340n-to-android-t3393648
Here is a guide on how to install the original firmware for your phone(lollipop): http://forum.xda-developers.com/leon/how-to/helpful-guide-to-stock-t3211208
If you have any questions ask me, if you want, I hope I helped you
Click to expand...
Click to collapse
i just try it, it's not working, the problem is showing the usb device, connected as port com, when I click on Read Phone Information, didn't work. thanks for the answer by the way
haky 86 said:
i just try it, it's not working, the problem is showing the usb device, connected as port com, when I click on Read Phone Information, didn't work. thanks for the answer by the way
Click to expand...
Click to collapse
have you changed the phone com port to 20 ???
Into lg flash tool i only connected my lg leon via usb and it automatically entered in download mode

Bricked my lg g2 d802 ):

Hello,
frist of all there's no download mode neither recovery mode (my lg screen is aboslute black)
when i am connecting my lg g2 to pc via usb many partitions pops up
and my device in the device mangaer seen as "qhsusb_bulk"
i have tried a guide using SRKTOOL, it did change my device name in the device manager to "marshall london hs-usb diagnostics 9006"
but nothing more, nothing less.
another thing that i just thoght about is -
when the partitions pops up, i can open one of them and inside there's folder named "image"
but when i try change it (delete,modify and more...) it says that the usb got write protection.
Iam dessperate pls help
ty
Try SRKTOOL
yairk96 said:
Hello,
frist of all there's no download mode neither recovery mode (my lg screen is aboslute black)
when i am connecting my lg g2 to pc via usb many partitions pops up
and my device in the device mangaer seen as "qhsusb_bulk"
i have tried a guide using SRKTOOL, it did change my device name in the device manager to "marshall london hs-usb diagnostics 9006"
but nothing more, nothing less.
another thing that i just thoght about is -
when the partitions pops up, i can open one of them and inside there's folder named "image"
but when i try change it (delete,modify and more...) it says that the usb got write protection.
Iam dessperate pls help
ty
Click to expand...
Click to collapse
First of all Try SRKTOOL method again by just attaching your phone and running srktool accordingly .........
Its the only way to do it!!!!!!!!!!!!
if you still facing problems then ask?????
Vague Z said:
First of all Try SRKTOOL method again by just attaching your phone and running srktool accordingly .........
Its the only way to do it!!!!!!!!!!!!
if you still facing problems then ask?????
Click to expand...
Click to collapse
ok ty ill try it when i'll get home and let u know
silvano2 said:
first flash pit to fix the partitions and then stock rom...if you dont know how just search inside g2 threads
Click to expand...
Click to collapse
what u mean by "flash pit" ?

Categories

Resources