Related
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .
someone please help..
TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..
patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.
TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?
Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse
Same problem.
Same problem
now can i go back to fast boot mode?
someone please help..
Same problem, please helpp
Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??
Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance
ecko no yaro said:
Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance
Click to expand...
Click to collapse
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
Mati0807 said:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
Click to expand...
Click to collapse
did you try to go from lollipop to kitkat?
heavy_metal_man said:
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
ecko no yaro said:
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means
Click to expand...
Click to collapse
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
---------- Post added at 06:20 PM ---------- Previous post was at 06:05 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Right, you need to follow this guide i think. Ensure your read it fully before you attempt anything. Now, the lollipop update apparently changed some partitions so I would flash the bumped twrp from the development section instead of the 2.6.3.2 version recommended. Then once you can boot into recovery flash the rom recommended in this post
heavy_metal_man said:
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
Click to expand...
Click to collapse
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode
ecko no yaro said:
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode
Click to expand...
Click to collapse
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!
heavy_metal_man said:
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!
Click to expand...
Click to collapse
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so
ecko no yaro said:
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so
Click to expand...
Click to collapse
Hmmm. im stumped. I think its a bit of a catch 22 here. What i think has happened is that the rom flash that was done has changed some of the partition layout, but the methods of fixing that issue is either with DD commands from a custom recovery (which you dont have and cannot flash) or with DD commands using ubuntu when the device is auto-mounting all of your partitions. Its worth a look if you have an ubuntu disk around, if not download here, burn to disk or mount it to a bootable usb and see if ubuntu has any luck with it. Either that or try installing any drivers you can on the pc to get download mode working.
there is also this as a last resort but i've never had to do this so i cannot vouch for it :-/ Good luck pal.
Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
and install bumped recovery 2.8.5.1, then next with otg cabble flash these http://forum.xda-developers.com/showpost.php?p=59079665&postcount=536.
and now i install cloudyg2 and i feel great xD thank you!
Mati0807 said:
Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
dear do you have above mentioned tool bcoz i can not download , this page do not open
Click to expand...
Click to collapse
new link http://www39.zippyshare.com/v/UphAeXOO/file.html
With all files for d802. i used these for my phone!
Only run these tool, and smile
How to Fix "error device not found in dload trying flash programmer" when use boardiag .
Lg g3 qualcomm 9008 when install driver then use tool boardiag fake tool say device not found in dload trying flash programmer
when you use tool fake board share in xda another tool say device not found in dload trying flash programmer. You need remove battery (of lg g2 hold power 1 minute) then connect cable again and use tool again
Sure install driver 100% wrong
With windowns 64 bit you need restart pc then click f8 choose disbable driver singturne....
Then remove battery (hold power 1 minute with lg g2) then connect cable try use tool unbrick >> sure done 100%
I will updload video error dload
Remember disbbale tool sony erricson if you have open tool in taskbar
How to fix “No response from the device. Check PMIC first and
if still boot problem, replace AP.”
Remove battery and connect again put qualcomm 9008 then use tool in topic
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-all-variants/ Just as helping
[*]I see very topic unbrick qualcomm 9008 lg g2, lg g3 but all tool can not use.
I have full tool board ver 2.9.( only 2.9).
Link download drive.google.xxx /file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view?usp=sharing (xxx= com)
Support lg g2, lg g3 workking 100%.
Download tool, open BoardDiag and choose file tot correct model phone of you( you can download tot in xda)
See guide in pictrure : very easy.
Note
Hold power 2 minute and connect cable ( or remove battery)>>And open tool check ap, emmc test again
Then unbrick done remove cable, hold power 30 second and hold volume up connect cable phone put downloadmod >> Use lgflashtool 1.5 flash file tot again >> done.
If done pls donate a few beers paypal of my Thank you very much.
Man you saved my ass Thank you so much !1 when i get my salary ill donate to you and tell everybody to do so cuz this tool is amazing. im in download mode now ill try to flash with lg flash tool.
Thank so much man but my g3 last week unbrick qualcomm i had I submit for warranty[emoji24] [emoji24] I am very Star-crossed [emoji20]
Hello friend willcracker
Hello friend willcracker :good:
I hope all is well;
I saw this little tutorial so I want to ask for help
I have a LG G3 D855p and my phone is dead (bricked)
I can not quite understand the method you friend
not turn on my phone
I can not enter the "" Download Mode ""
VOL + Up when I connect the USB cable to the PC recognizes me as:
Qualcomm HS-USB QDLoader 9008 (COM10)
why I ask for help to revive my g3
If you help me ... .. I promise to donate something for you
you send a file "picture" attached
- - As I can get to "" Fastboot Mode "" on my phone
I hope your prompt response, please do not ignore my message :crying:
greetings from peru
You need to Disassemble Phone and Expose the TP Location
See pictrue
Expose the TP Location.
Done phone put qualcom 9008>> use tool unbrick
Remeber unplug battery connect only cable and short testpoint
Thanks for responding, but I need your help please friend
Hello willcracker I have no such tool you indicate "tool unbrick testpoint"
I could do this step with some type of cable or wire?
- If you Might tell me how to do that step with another option
leave your email. to chat google chat (Houngts) and you help me please
I'm worried because my g3 d855p not light, or anything like I said ....
await your prompt response, I hope you can help me
TOT Firmware, must match installed version?
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
Lollipop was installed, goal was to move to a custom rom (blisspop v2.3)
Rooting was successful
Install of twrp not, reboot into recovery caused the 'signature verification error'
Tried to flash the kitkat rom via the download method, failed, ...
Currently, I have the same verification error also when trying to get into download mode and have the Qualcomm HS-USB QDLoader 9008 in my device manager.
I have the LGD855AT-00-V10e-EUR-XX-JUL-08-2014-16G+0.tot file and did the first step of your procedure. Can I do the second step with this extract of kitkat even if lollipop was installed?
any feedback greatly appreciated!
Hello willcracker thanks, thanks for reply but I need your help please
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
Greetings from Peru
Click to expand...
Click to collapse
NO you need find google how do short testpoint samsung n7100 you see they guide short testpoint . Lg when short testpoint phone detect qualcomm 9008
And you use tool board diag unbrick.
???
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
Click to expand...
Click to collapse
I'm in the same boat! Could you please explain it a little better?
frank.devliegher said:
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
any feedback greatly appreciated!
Click to expand...
Click to collapse
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Ahh now i see!
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
sourly64 said:
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
Click to expand...
Click to collapse
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
Model Lg d851? writh
rememer ber tool suppoer only lg g3 f400s/l/k , lg d855 16gb and 32gb.
If use tool say error pcmic on tool not support (Ex: lg d851)
I up load only msm8974ac g3 msm8975ac g3 no upload
Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
It seems won't work.I have gone through about this problem.Alway AP Check fail.QPST reported that phone had been in Sahara download mode for few seconds.A RMA fix my phone.But it cost me about 50dollars
willcracker said:
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Click to expand...
Click to collapse
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
TOT Version
willcracker said:
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Click to expand...
Click to collapse
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
frank.devliegher said:
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
Click to expand...
Click to collapse
YES you can use tot kikat unbrick .
sourly64 said:
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
Click to expand...
Click to collapse
sr i have not upload hex lg gpro waitting comming soon.
Hello,
frist of all there's no download mode neither recovery mode (my lg screen is aboslute black)
when i am connecting my lg g2 to pc via usb many partitions pops up
and my device in the device mangaer seen as "qhsusb_bulk"
i have tried a guide using SRKTOOL, it did change my device name in the device manager to "marshall london hs-usb diagnostics 9006"
but nothing more, nothing less.
another thing that i just thoght about is -
when the partitions pops up, i can open one of them and inside there's folder named "image"
but when i try change it (delete,modify and more...) it says that the usb got write protection.
Iam dessperate pls help
ty
Try SRKTOOL
yairk96 said:
Hello,
frist of all there's no download mode neither recovery mode (my lg screen is aboslute black)
when i am connecting my lg g2 to pc via usb many partitions pops up
and my device in the device mangaer seen as "qhsusb_bulk"
i have tried a guide using SRKTOOL, it did change my device name in the device manager to "marshall london hs-usb diagnostics 9006"
but nothing more, nothing less.
another thing that i just thoght about is -
when the partitions pops up, i can open one of them and inside there's folder named "image"
but when i try change it (delete,modify and more...) it says that the usb got write protection.
Iam dessperate pls help
ty
Click to expand...
Click to collapse
First of all Try SRKTOOL method again by just attaching your phone and running srktool accordingly .........
Its the only way to do it!!!!!!!!!!!!
if you still facing problems then ask?????
Vague Z said:
First of all Try SRKTOOL method again by just attaching your phone and running srktool accordingly .........
Its the only way to do it!!!!!!!!!!!!
if you still facing problems then ask?????
Click to expand...
Click to collapse
ok ty ill try it when i'll get home and let u know
silvano2 said:
first flash pit to fix the partitions and then stock rom...if you dont know how just search inside g2 threads
Click to expand...
Click to collapse
what u mean by "flash pit" ?
Good day all,
I've had my LG for a year almost working perfectly on stock OS. suddenly one morning it was battery drained and ever since wouldn't start up.
my LG boots and gets stuck on
ERROR : boot certification verify
[1040] ---------------------------------------
[1050]
[1050] secure booting Error!
[1050] cause : boot certification verify
[1050]
[1050]----------------------------------------
then it turns off alone...
i have tried getting it into download mode it gives me same error, have also tried a full hard reset(vol- power lg logo vol- power) it goes and starts with the android robot and loading then just goes off.
However i download the LG drivers and after i try turning on the phone normally it goes off all i did was keep holding the volume up button then plugged into PC(win7) i get a removable disk of 63.9mb with two folders init(image and verinfo), in device manager it is COM15 LGE AndroidNet USB Serial Port. please keep in mind the screen is blank off when all this shows on PC.
I'm basically out of options idk what to do, please help me i have searched all over the web and cant find anything valid .
Any help would be appreciated.
Anyone help me (
anhtuan1992s said:
Good day all,
I've had my LG for a year almost working perfectly on stock OS. suddenly one morning it was battery drained and ever since wouldn't start up.
my LG boots and gets stuck on
ERROR : boot certification verify
[1040] ---------------------------------------
[1050]
[1050] secure booting Error!
[1050] cause : boot certification verify
[1050]
[1050]----------------------------------------
then it turns off alone...
i have tried getting it into download mode it gives me same error, have also tried a full hard reset(vol- power lg logo vol- power) it goes and starts with the android robot and loading then just goes off.
However i download the LG drivers and after i try turning on the phone normally it goes off all i did was keep holding the volume up button then plugged into PC(win7) i get a removable disk of 63.9mb with two folders init(image and verinfo), in device manager it is COM15 LGE AndroidNet USB Serial Port. please keep in mind the screen is blank off when all this shows on PC.
I'm basically out of options idk what to do, please help me i have searched all over the web and cant find anything valid .
Any help would be appreciated.
Click to expand...
Click to collapse
Pls help me
Hi guy,
I had a similar problem on weekend. I tried lot of methods and I fixed my phone. I don't have download mode yet, but i did my phone boot to system properly.
I don't know exactly what I did, my on forums of LG G3 a man posted 2 lines of comand that you can write on ADB. I think that these commands fixed my problem. But I tried lot of methods, so i can't say with conviction.
I will look on my historic on browser and put here all links that I researched.
Ben Flanders said:
Hi guy,
I had a similar problem on weekend. I tried lot of methods and I fixed my phone. I don't have download mode yet, but i did my phone boot to system properly.
I don't know exactly what I did, my on forums of LG G3 a man posted 2 lines of comand that you can write on ADB. I think that these commands fixed my problem. But I tried lot of methods, so i can't say with conviction.
I will look on my historic on browser and put here all links that I researched.
Click to expand...
Click to collapse
would you like to send my the link (
Sorry for delay
http://forum.xda-developers.com/showthread.php?t=2451696&page=47
thks a lot
Ben Flanders said:
Sorry for delay
http://forum.xda-developers.com/showthread.php?t=2451696&page=47
Click to expand...
Click to collapse
hi man i have the same problem but i have D290N
My phone is connected to comuter and detecting as "qualcomm mmc storage usb device"
with 63,9mb storage
(like a friend that started this thread)
My problem is that when i type adb shell
in adb
it says "error: no devices/emulators found"
any ideas :crying:
atiPL said:
hi man i have the same problem but i have D290N
My phone is connected to comuter and detecting as "qualcomm mmc storage usb device"
with 63,9mb storage
(like a friend that started this thread)
My problem is that when i type adb shell
in adb
it says "error: no devices/emulators found"
any ideas :crying:
Click to expand...
Click to collapse
Hi guy, in my researches I saw a thread about a problem that when cellphone is connected in the computer, computer recognizes only as qualcomm.
I don't remember exactly how to fix it, but take a look in the forums, i'm sure that you'll find a solution
sorry for don't help you
Help!
phone (lg295) is not included.
connecting see it as qualcomm 9800.
It does not respond to anything. I tried to restore it from the next topic - but there is only a way for the 290 ....
what to do...?
Any help (
anhtuan1992s said:
Any help (
Click to expand...
Click to collapse
See what i wrote above. There is a thread about this issue.