[Q] DemiGod Crash Handler: Critical Error - G2 Q&A, Help & Troubleshooting

HELP! I tried to install 30B LPBootstack but after I re-enter recovery mode I got
Critical Error!
DemiGod Crash Handler : Critical Error!
Press Key to choose Dload Mode or Reboot.
1. Vol Up : Dload Mode
2. Vol Down : Reboot
If you choose Dload Mode
1. Dload Mode. Please connect USB
2. Get the ram dump image using QPST Configuration.
I can't access Download or Recovery mode because every time I try to access them I get stuck at this screen.
HELP!
SOLUTION
-SEARCH SRK TOOLS.
I found that my problem something with Qualcomm Qhsusb_bulk.
Srk tools was the only thin that helped my phone resurrect from the dead.

Attention!!!!
Please ignore now. I got my problem solved.

CooLoL1999 said:
Attention!!!!
Please ignore now. I got my problem solved.
Click to expand...
Click to collapse
...but you're going to post the solution as well, right?

Problem
CooLoL1999 said:
Attention!!!!
Please ignore now. I got my problem solved.
Click to expand...
Click to collapse
how?I have this problem. Please help!

I have the same problem, may i have the solution, please help

kongwong82 said:
I have the same problem, may i have the solution, please help
Click to expand...
Click to collapse
SRK Tools help you

L0nelyE4rth said:
SRK Tools help you
Click to expand...
Click to collapse
I tried to use this tool you mention but how can it solve the demigod error?
SRK says "waiting for device" and nothing happens after that. The PC doesn't recognize the phone

tommy paradise said:
I tried to use this tool you mention but how can it solve the demigod error?
SRK says "waiting for device" and nothing happens after that. The PC doesn't recognize the phone
Click to expand...
Click to collapse
Please go to tell him not me, I'm tester not dev

http://forum.xda-developers.com/showthread.php?t=2582142, might help you!!!

tommy paradise said:
I tried to use this tool you mention but how can it solve the demigod error?
SRK says "waiting for device" and nothing happens after that. The PC doesn't recognize the phone
Click to expand...
Click to collapse
Well bro I was stuck with the same issue..
This happens to me when i flashed a wrong twrp recovery for lg g2 d801 and it was stuck in critical error i was also unable to access download mode ..
But my Good luck was that i recovered it by doing silly thing ?
So i do following things. But make sure u know the corrert version of your lg g2 to flash kdz file with lg flash tool and also must have lg drivers intalled.
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode
I performed all this on lg g2 d801 but i hope u can try it on other varients as well. As i was scared of short circut method and srk tool didn't help..

Related

[HELP] Lg Optimus L3 E400 Bricked [SOLVED]

Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM

STUCK at LG Logo, NO Download mode..Please HELP!!

hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .
someone please help..
TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..
patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.
TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?
Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse
Same problem.
Same problem
now can i go back to fast boot mode?
someone please help..
Same problem, please helpp
Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??

PLEASE HELPP lg g2 d802 stuck at boot logo

please somebody help my lg g2 stuck at boot logo. i cannot boot to fastboot, recovery or download mode.
when i try to get to download mode i get white screen with some critical error.
DemiGod Crash Handler : critical crash:
Press key to choose Dload Mode or Reboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
when i chose download mode it stays at this screen and lg flashtools doesn't recognizes it.
I got the same issue, Mine happened when I was using KDZ and I moved my phone but i guess my usb connection went on and off so everything just crashed . I haven't find a fix yet but if I do i'll let you know
anyone have solution to this, i have similar problem
Same issue, my PC doesn't even detect the phone.
Please help !!!
Raiden350 said:
Same issue, my PC doesn't even detect the phone.
Please help !!!
Click to expand...
Click to collapse
this man can help " aftabalam8c2". you have to force your mobile into Qualcomm HS-USB QDLoader 9008 mode.
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
only this
Solution I guess it is here
ilyas111 said:
please somebody help my lg g2 stuck at boot logo. i cannot boot to fastboot, recovery or download mode.
when i try to get to download mode i get white screen with some critical error.
DemiGod Crash Handler : critical crash:
Press key to choose Dload Mode or Reboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
when i chose download mode it stays at this screen and lg flashtools doesn't recognizes it.
Click to expand...
Click to collapse
Brother I had the same problem yesterday and the pc didnt even detect the lg g2.... The thing is just do like I did listen carefully.
1 / Download LGMobile Support tool and install it quickly
2/ Open that program and click on install drivers ( when drivers are installed just go to the right top corner you will find an " OPTION ' click on it >>> And then click on upgrade recovery and do the process it says until it downloads and finishes )
3/ Go to the phone and enter Dload mode by pressing one the volume UP button and plug the usb cable directly to your device
4/ When the process will be finished you will have your phone healthy ))) and please do not unplug the lg g2 during the process

URGENT HELP!! Not able to boot my LG G2

Hello everyone,
I have a rooted LG G2 D802. I have very less technical knowledge about stuff.
Today i had done following things:
1- Downloaded Autorec
2- Installed TWRP recovery through Autorec
3- Installed Flashify
4- Rebooted to recovery
After this phone turned off and is completely died. It is showing no sign of life. Guys please help me i cannot afford a new phone now so i need this phone ver badly.
Thanks in advance.
Try to use srktool to unbrick you phone.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
dumbrose said:
Hello everyone,
I have a rooted LG G2 D802. I have very less technical knowledge about stuff.
Today i had done following things:
1- Downloaded Autorec
2- Installed TWRP recovery through Autorec
3- Installed Flashify
4- Rebooted to recovery
After this phone turned off and is completely died. It is showing no sign of life. Guys please help me i cannot afford a new phone now so i need this phone ver badly.
Thanks in advance.
Click to expand...
Click to collapse
If you can go download mode there'll be no problem. Use flash tot method.
Hiyaslalabs said:
If you can go download mode there'll be no problem. Use flash tot method.
Click to expand...
Click to collapse
No man i cant even go to download mode. The phone screen turns on when i connect it to laptop. after some time it starts turning on-off rapidly. and rarely red led is also flashed.
Ok so what you are going to do is to press the volume up button and connect your usb cable. After that you should be in download mode. Follow the instructions of http://forum.xda-developers.com/showthread.php?t=2432476 and i suggest you would choose the kdz method. Good luck
dumbrose said:
No man i cant even go to download mode. The phone screen turns on when i connect it to laptop. after some time it starts turning on-off rapidly. and rarely red led is also flashed.
Click to expand...
Click to collapse
Please follow the procedures carefully on the flash kdz/tot method if nothing happens then seek help here.
Hiyaslalabs said:
Please follow the procedures carefully on the flash kdz/tot method if nothing happens then seek help here.
Click to expand...
Click to collapse
Thank you so much for being there to help.
Sorry but i cannot het into download mode.. Through study on other xda forums i can find you that i have
"QUALCOMM HS-USB 9006 " problem.
dumbrose said:
Thank you so much for being there to help.
Sorry but i cannot het into download mode.. Through study on other xda forums i can find you that i have
"QUALCOMM HS-USB 9006 " problem.
Click to expand...
Click to collapse
Holding volume up and power doesn't go download mode? You can try the SRK tool just download it. If it doesn't work you need the boarddiag method just search it here. I hope it'll be fixed soon.
I killed my 802 flashing CM13 onto it.
LG logo would flash up, no download mode but I could boot into recovery. However the phone wasnt seen in windows and did the multiple partitions thing a few have mentioned.
SRKtool fixed it, theres also a guide on youtube on how to use the software.
nine0nine said:
I killed my 802 flashing CM13 onto it.
LG logo would flash up, no download mode but I could boot into recovery. However the phone wasnt seen in windows and did the multiple partitions thing a few have mentioned.
SRKtool fixed it, theres also a guide on youtube on how to use the software.
Click to expand...
Click to collapse
can you share the link to the guide please? i am currently downloading srk tool
Hello everyone. i want to confirm that SRK Tool saved me. now my phone is back to normal. I didn even needed to flash the stock firmware.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Thanks to xda community!

[HELP] LG G2 can not open (stay at logo) (TWRP can't open - boot certification error)

Hello my friends.
I installed CloudyG2 3.3 to my LG G2. And on this morning, my phone closed. I tried to open but, i can't. The screen stayed at LG logo screen. So i tried to do Hard Reset with buttons. I said Yes-Yes but there was something wrong.. A mistake. (boot certification error) I can't enter TWRP screen.
I tried to install stock rom with Flash Tool. But i can't.. Again.. Because it stuck at %2..
So i can't install stock rom and i can't open my phone. Can anybody help me?
Sorry my bad English.
cemre17 said:
A mistake. (boot certification error) I can't enter TWRP screen.
I tried to install stock rom with Flash Tool. But i can't.. Again.. Because it stuck at %2..
Click to expand...
Click to collapse
First of all power of your phone by long pressing power button until screen light goes off completely
Then keep pressing volume + button and connect it to PC via USB cable. [DOWNLOAD MODE]
Now you must be in download mode, simply flash stock firmware.
If you can't enter download mode then you might be in fastboot mode.
here are some threads..find out which one is related to your problem follow instructions carefully.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
OR
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
OR
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK
As you mentioned that you were running a custom ROM prior to this problem then I'm sure that you need not to visit following thread.
Refurbished phones and a few words of caution
Good Luck...!
KASHYAP9 said:
First of all power of your phone by long pressing power button until screen light goes off completely
Then keep pressing volume + button and connect it to PC via USB cable. [DOWNLOAD MODE]
Now you must be in download mode, simply flash stock firmware.
If you can't enter download mode then you might be in fastboot mode.
here are some threads..find out which one is related to your problem follow instructions carefully.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
OR
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
OR
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK
As you mentioned that you were running a custom ROM prior to this problem then I'm sure that you need not to visit following thread.
Refurbished phones and a few words of caution
Good Luck...!
Click to expand...
Click to collapse
Thank you my friend for all your answers. In substance;
I can't open my phone. (Staying at LG logo screen.)
I can't do "Hard Reset" with phone buttons. (Because of "boot certification error" screen.)
I can enter "Download Mode" but I can't loading any .KDZ file with Flash Tool. (Stuck at %2)
My computer can't see my phone when I plug that.
Very hard situation. :crying:
cemre17 said:
Thank you my friend for all your answers. In substance;
I can't open my phone. (Staying at LG logo screen.)
I can't do "Hard Reset" with phone buttons. (Because of "boot certification error" screen.)
I can enter "Download Mode" but I can't loading any .KDZ file with Flash Tool. (Stuck at %2)
My computer can't see my phone when I plug that.
Very hard situation. :crying:
Click to expand...
Click to collapse
Reinstall LG drivers and PDA
then connect phone with PC in download mode.
open device manager and search for 'COM ports' list if you see your device there then you are ready to go.
If your device is not there then search under 'Other devices' and manually install drivers.
If you can boot into download mode and still you can't see your device in your PC then it's not problem with your G2. It's your PC which is causing it all.
Try another PC.
KASHYAP9 said:
Reinstall LG drivers and PDA
then connect phone with PC in download mode.
open device manager and search for 'COM ports' list if you see your device there then you are ready to go.
If your device is not there then search under 'Other devices' and manually install drivers.
If you can boot into download mode and still you can't see your device in your PC then it's not problem with your G2. It's your PC which is causing it all.
Try another PC.
Click to expand...
Click to collapse
I reinstalled LG drivers, and i can see "LGE Android MTP Device" in Device Manager and it has no problem. (There is no yellow exclamation mark) But still, my computer can't see my phone. And i tried install stock rom with Flash Tools again but i did not work. Stuck at %2 again.

Categories

Resources