[Q] Abnormal Reboot - YU Yureka Q&A, Help & Troubleshooting

Hi,
Its been more than one week, My Yu Yureka device is gettting rebooted abnormaly and its happening from couple of times.
Can anyone help me to resolve it ?
I already tried with safe mode option as recommendation by Yu customer support.
Thanks & regards
Vikas Singh
Email ID:- [email protected]

Related

[Q&A] Micromax A77 Canvas Juice [All in one thread] [CWM, ROM, Root]

Q&A for Micromax A77 Canvas Juice [All in one thread] [CWM, ROM, Root]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Micromax A77 Canvas Juice [All in one thread] [CWM, ROM, Root]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
<<urgent help needed>>
i accidently deleted build.prop file and rebooted...
now my phone i stuck on logo..
i am the owner of micromax canvas a77(rooted)
and
when i try to connect my phone to PC it says MTK65xx drivers not installed
i also tried installing these drivers but the phone didn't connect
probably because my USB debugging was not enabled..
PLZZZZZZZZZZZ HELP ME
I WANT MY PHONE BACK ((((
plz tell me appropriate steps to b taken ASAP !
thanks in advance
YOU CAN ALSO CONTACT ME ON <[email protected]>
can all owners of micromax canvas series especially a77 let me know about how to enable navigation bar in my phone, i had tried a lot by gravity box but still i cannot get it.
what i tried
1> tried enabling navbar through gravity box in my friends karbonn titanium s5 and got it
2> tried enabling it in my xposed modified rom but was unable get it
3> flashed the fresh stock rom installed xposed and gravity box rebooted enabled navbar but still cant get it.
any kind of help will be appreciated
thanks for paying attention...
---------- Post added at 06:07 PM ---------- Previous post was at 05:56 PM ----------
Rishav24397 said:
i accidently deleted build.prop file and rebooted...
now my phone i stuck on logo..
i am the owner of micromax canvas a77(rooted)
and
when i try to connect my phone to PC it says MTK65xx drivers not installed
i also tried installing these drivers but the phone didn't connect
probably because my USB debugging was not enabled..
PLZZZZZZZZZZZ HELP ME
I WANT MY PHONE BACK ((((
plz tell me appropriate steps to b taken ASAP !
thanks in advance
YOU CAN ALSO CONTACT ME ON <[email protected]>
Click to expand...
Click to collapse
i flashed my phone just a day before from now and even i got that problem
solution- just search around google with proper driver installation you will get it
best of luck
I also tried gravity box, and build.prop method
i think there must be something in framework res, that needs tweaking...
and experienced user here?
Unbrick micromax A177
My phone has been bricked ...Not turning on..just the logo stays..Plz help me to solve the problem..
Just tried steps from..
Problem solved...Got recovered
I bricked my micromax a177.need help urgent!!!!
hi!
i had my phone rooted for almost a year with CWM recovery installed. i also have nandroid backup.
my phone was not conneting to wifi so i decided to factory reset it. i did factory rest in the simple way(settings->bacup&reset->factory reset)but my phone is stuck in bootloop. and it wont go in recovery mode. plz help....its urgent i have no idea what to do as it wont go to recovery mode
and sorry for bad english.
plzzzzzzzzzzzzzzzzz!!!!!!!!!!
can i use cyanogen mod on my micromax a77

hard brick problem of one kind solved...

if u have any hard bricked yureka just ping me with necessary details..i may help..
i am saying this bcoz ialready made my yureka bricked unknowingly..
some how i managed to get it back again..
now my device is running with unofficial 13.0 cyanogen perfectly..
i cannot guarntee will solve bricking but maximum i will share my experience that may work for your YU also
just follow this thread to know more..
if have any query contact me at [email protected]
Pls post ur quires in this thread and follow this for more updates..pls click thanks

Rebooting And bootloops again & again untill charger connect

Hi,
My yu device have problem, it is randomly reboot and show only yu logo untill connect to mobile charger or power bank. I have trying all method like flash stock rom cm11 and cm 12 both. Yu official unbrick tool by Annabathina. flashing resurrection remix 5.7, Yu open os, Miui V8.0.2.0 & v8.0.3.0 & v8.0.10.0, but no solution and solve problem. And when connect to charger it starts normally but no sim card network in my device.
Please help us many of thread in this forum registered same problem so please help us to regarding this problem.If any one find solution them make us helpfull hand.
Thanking you
me tooo
I am facing this issue too .. and me myself concluded this may be battery issue.
I flashed frimware of cm12.1, flashed all previoulsy worked roms,kernels etc but coludnt find any hope.
bro if u find any solution pls replay

Hello please help me! My samsung g360hu keeps rebooting after flashing the cm12.1

Hello. Please help me. After i flash the cm12.1 rom (lollipop) by: DoesntExist post for my sm g360hu when i try to make a call, my phone reboot automatically. I can't download the "Quick Patches" to fix my issue because the link is not working anymore. Anyone has a backup for QUICK PATCHES? please help me. thankyou!
-sorry for my bad english.

[Request] [Recovery] Custom Recovery for SM-A920F

Hi developers,
I would like to ask you for a custom Recovery for rescue the data on my SM-A920F device.
following situation:
My Phone has a broken screen (no touch, no picture) and its not rooted and USB-debbuging isn´t enabled.
so i have no way of accessing it.
this model also cannot connected to a hdmi port so i can`t control it via mouse and use methodes like Magisk
The best way i think is to enter the recovery download mode (blind) and flash a custom recovery (with the possibility of using adb pull) via ODIN.
But i can´t find a custom recovery for this device
The TWRP Builders reject Requests for Samsung devices because of the need for kernel modification.
So can anyone help me to get a recovery or access to the data.
Best Regards
sang real
Yes I too want
Anyone wanna help ? Join the telegram group " samsung a9 testing group" . We will post twrp as soon as we complete . We have encountered with small data bugs. Any developer who wanna help can join.
Dharmtej said:
Anyone wanna help ? Join the telegram group " samsung a9 testing group" . We will post twrp as soon as we complete . We have encountered with small data bugs. Any developer who wanna help can join.
Click to expand...
Click to collapse
Please take note of XDA's Telegram Chat Rules regarding opening "stand alone" TG channels. Thank you.
-Regards: Badger50

Categories

Resources