There are ftf and flasable zip file wich install latest ROM 23.0.1.A.0.167 RU, latest SuperSu v2.16 and latest beta Dualrecovery .154 for Tablet Z2 with read/write acces to system.
Stock ftf (.167) install via flashtool: SGP521_23.0.1.A.0.167_VMo RU-UA-KZ.ftf (1.16 GB )
Prerooted (.167) version flash via custom recovery on a previous (.314) version of firmware: SGP521_23.0.1.A.0.167_RU_flashable.zip (1.04 GB )
After install Wipe Cache/Dalvik.
Then you can use this deodex-patch
Credits: kulvertti
Thanks
Giving it a go.
I'll update in a few mins.
Flashable zip worked great.
Thanks again.
tried the ftf file via flashtool and I don't have root
Not sure if I did something wrong
Hhunted said:
tried the ftf file via flashtool and I don't have root
Not sure if I did something wrong
Click to expand...
Click to collapse
You need:
1. To downgrade firmware to .314 via flashtool and to root your tablet.
2. Install XZDualRecovery.
3. Install prerooted (.167) version via recovery (OP).
Bird40 said:
You need:
1. To downgrade firmware to .314 via flashtool and to root your tablet.
2. Install XZDualRecovery.
3. Install prerooted (.167) version via recovery (OP).
Click to expand...
Click to collapse
Thank you. I sat till 01:30 this morning to get my tablet back to workable state after trying to downgrade. In the process I lost some data.
The mistake I did was to flash your ftf file via flashtool after I did a OTA update to .167. From there things went south quickly. Now I'm back to .167 after flashing a generic .314 and doing an OTA.
Will start the process again to downgrade and then root and then install dual recovery.
Sorry for the stupid question. I'm from South Africa, is there a way I can get or make a flashable .167 for my region or doesn't it really matter using a RU version?
First off, i would like to say thank you for these FTF files
i flashed this FTF without a hitch, everything works as it should except my data connection. and for me, this is a deal breaker, i need the data connection (I'm currently with bell mobility)
now my question is...
can i take out the LTE bands from this 23.0.1.A.0.167 FTF and replace it with bell's (band4 1700MHz, band7 2600MHz)
sorry for this noob question, my other tab is the nexus 7... no FTF files to deal with.
firmware version
17.1.1.A.0.438 with a locked bootloader ( un-lockable )
Hi again. Managed to get the update done and now have. 167 installed with root. I'm having the same problem as blaze82 with regards to the LTE not working for me. I also need my LTE to work, so can this be fixed somehow?
An ex Asus transformer user, so the sony way of foing is also new to me.
Many thanks for files and help.
Just realized that there is no APN set for mobile Internet access. Added it and now my LTE is working.
Bird40 said:
You need:
1. To downgrade firmware to .314 via flashtool and to root your tablet.
2. Install XZDualRecovery.
3. Install prerooted (.167) version via recovery (OP).
Click to expand...
Click to collapse
Could you give me a link to the .314 please?
GrimTech said:
Could you give me a link to the .314 please?
Click to expand...
Click to collapse
SGP521_17.1.2.A.0.314 RU.ftf ( 1 GB )
Bird40 said:
SGP521_17.1.2.A.0.314 RU.ftf ( 1 GB )
Click to expand...
Click to collapse
I'm from the UK this will work fine right?
GrimTech said:
I'm from the UK this will work fine right?
Click to expand...
Click to collapse
Yes
setting force close
When trying to set apn settings stops responding
after restart asking for choose If I'm from Russia, Kazachstan or Ukraine. How to get rid of that?
Pick one, I went with Russia and it loaded fine and left my setting to English but if it changes its not hard to change your language.
Work in India?
Bird40 said:
Yes
Click to expand...
Click to collapse
I'm from India will this work.
Any flashable zip of new update .291?
Sent from Tapatalk Xperia Z3C
Related
here is new file upload to gdrive
https://docs.google.com/file/d/0B3P5IuYR4HmGVXpLQy1XUVR4Snc/edit?usp=sharing
Enjoy
sorry for the trouble.
For the people who interested, this is Singapore latest firmware 10.3.A.0.423-R4B 1270-1412
https://docs.google.com/file/d/0B3P5IuYR4HmGbnhidy02bW83Y1U/edit?usp=sharing
Thanks ! Downloading now, does this work with Doomlord's v15 root exploit ?
feizylong said:
File split into two: part a and part b
http://d-h.st/Z8v
http://d-h.st/NZt
MD5 091b5c5512822af2a48609b4046a9a3d
Previous version: 10.1.1.A.1.307
Enjoy
Click to expand...
Click to collapse
So is the HK one better than the ES one?
make87 said:
Thanks ! Downloading now, does this work with Doomlord's v15 root exploit ?
Click to expand...
Click to collapse
Yes, it does work.
ryuworks said:
So is the HK one better than the ES one?
Click to expand...
Click to collapse
It comes with NFC icon pre-enable I assume , compare with spain tft which need to modified.
any of the irritating notifications?
has permanent "swipe up to unlock" text?
compatible to all xperia z cust #s?
Possible to elaborate more on merging files?
I need help on merging the files as well.
Any idea how to do it on Mac OSX?
update:
I've figured out how to merge the files in Mac OSX with terminal.
After flashing the rom, I'm still on 4.1.2?
why 4.1.2???? i already flash it..
the same problem: 4.1.2 after flashing
flashtool 0.9.11.0
flashing process was completed without any errors
but... 4.1.2 and even not HK - just my previous build and localization
yegorka said:
the same problem: 4.1.2 after flashing
flashtool 0.9.11.0
flashing process was completed without any errors
but... 4.1.2 and even not HK - just my previous build and localization
Click to expand...
Click to collapse
Same here.
The first time i flash from the last global fw and got stuck in a boot loop.
I used update service to reset my phone. It reverted back to the last fw that was released in the uk. So this was a couple of firmwares backwards.
I then tried to flash this ftf again. After the process my phone is factory reset but with the uk firmware that was released a good few weeks ago.
That's very awkward.
@feizylong: Did you use all (five) FILE_********* files from Sony PC Companion / Sony Update Service?
Did you include everything except simlock.ta?
Same here. Flashed and still on 4.1.2. :crying:
after comparing this firmware with ES one, i found that here are TWO "elabel" files!
but deleting of "elabel-c6603-row_201302281243_10.1.1.A.1.253.sin" from the .FTF (and leaving "elabel-c6603-row_201302281243_10.3.A.0.423.sin") didn't help at all
bye-bye, buggy HK
hello, working ES!
yegorka said:
after comparing this firmware with ES one, i found that here are TWO "elabel" files!
but deleting of "elabel-c6603-row_201302281243_10.1.1.A.1.253.sin" from the .FTF (and leaving "elabel-c6603-row_201302281243_10.3.A.0.423.sin") didn't help at all
bye-bye, buggy HK
hello, working ES!
Click to expand...
Click to collapse
Just wasted my time! Should of just stuck to the ES
Sorry guy,
here is a complete one file :
https://docs.google.com/file/d/0B3P5IuYR4HmGVXpLQy1XUVR4Snc/edit?usp=sharing
flash it at your own risk..
happy flashing
Hello, who can assist for the CMW kernel for the 4.2.2 version for flashing through flashtool ? I think there's none yet released, but there are version where you need to flash the whole ZIP file. I just need the kernel boot.img with CMW, as i flashed the ES unbranded version. Working just excellent, and rooted with DooMLord's V15 easy rooting toolkit
permanent "swipe up to unlock" text?
How to take screenshot now in 4.2.2?
[STOCK][C6903][4.4] Update to 14.3.A.0.681 Central Europe 1 (1276-4318) [Root & XZDR]
Hi,
!!! WARNING !!!
C6903 only!
Use at your own risk!
!!! WARNING !!!
Firmware info:
Device: C6903
Build number: 14.3.A.0.681
Android version: 4.4.2
Customization version: 1276-4318
Branding: Central Europe 1
The following items are integrated into this ROM:
XZDR: 2.7.99-BETA
SuperSU: 1.93
Fix to allow _writing_ to external SD cards.
How to update:
1. Put the flashable zip file on an external SD.
2. Boot into TWRP and install the update file.
3. _Power off_ the phone (do not boot into system yet!).
4. Flash the stripped ftf with Flashtool (version 0.9.15 required).
5. Boot into system.
Do not forget to _BACKUP_ before performing these steps!!!
This wouldn't be possible without the great work of @[NUT]! Thank You very much! :good:
Downloads (Google Drive):
Flashable zip: C6903_14.3.A.0.681_CE1_1276-4318.flashable.zip (mirror)
md5sum: 3f2a54902629bac1a178dd5265102cbc, sha1sum: 5f2fe2f59ad137553bda36b3a65eaeb10bc5c2ad
Stripped ftf: C6903_14.3.A.0.681_Central Europe 1 (1276-4318)-Stripped.ftf (mirror)
md5sum: 8f171deed413f9ccaed4abd8f5cbf30d, sha1sum: 9f3f622b116a9f7eb823e210b797c436ad501f05
Enjoy!
KNOWN ISSUES:
* TWRP from XZDR 2.7.99 can't backup system partition - I strongly advise to update to XZDR 2.7.101 which fixes this issue
Want to create similar ROM with your customization? Follow this DIY Guide by [NUT].
Cheers,
Mateusz
about bootloader
bootloader still locked in this case or not, i am in kk 681 version can i do this without any problem.
first i instal TWRP manager from play store , after i flash the zip file, i turn off my phone. i open flashtool and flash the stripped ftf when my phone is power off. when flashed the stripped i turn it on, and i done??????
thats all??
can anyone help pls??
excellent. thanks for this. ill updated later.
can i just ask do you have the sound issue with this 4.4.2 version? i.e. where after a call the notifications come via earpiece instead of the speaker etc.
Cheers,
Andy
andyneouk said:
excellent. thanks for this. ill updated later.
can i just ask do you have the sound issue with this 4.4.2 version? i.e. where after a call the notifications come via earpiece instead of the speaker etc.
Cheers,
Andy
Click to expand...
Click to collapse
yes i have
f3nix82 said:
Hi,
!!! WARNING !!!
C6903 only!
Use at your own risk!
!!! WARNING !!!
Firmware info:
Device: C6903
Build number: 14.3.A.0.681
Android version: 4.4
Customization version: 1276-4318
Branding: Central Europe 1
The following items are integrated into this ROM:
XZDR: 2.7.99-BETA
SuperSU: 1.93
Fix to allow _writing_ to external SD cards.
How to update:
1. Put the flashable zip file on an external SD.
2. Boot into TWRP and install the update file.
3. _Power off_ the phone (do not boot into system yet!).
4. Flash the stripped ftf with Flashtool (version 0.9.15 required).
5. Boot into system.
Do not forget to _BACKUP_ before performing these steps!!!
This wouldn't be possible without the great work of @[NUT]! Thank You very much! :good:
Downloads (Google Drive):
Flashable zip: https://drive.google.com/file/d/0B2-FUIRLyD-EckJpV0tXX3pLVEE/edit?usp=sharing
md5sum: 3f2a54902629bac1a178dd5265102cbc, sha1sum: 5f2fe2f59ad137553bda36b3a65eaeb10bc5c2ad
Stripped ftf: https://drive.google.com/file/d/0B2-FUIRLyD-EcldzM3g3QnhTaW8/edit?usp=sharing
md5sum: 8f171deed413f9ccaed4abd8f5cbf30d, sha1sum: 9f3f622b116a9f7eb823e210b797c436ad501f05
Enjoy!
Cheers,
Mateusz
Click to expand...
Click to collapse
Hi!
My flashmode is not working properly, could you please make a stock boot.img kernel?
Just the stock kernel, no mods.
Then I could flash kernel in fastboot.
Thanks for your great work!
Thanks,
How did you made the rom and stripped ftf from an full ftf file? I am waiting for NUT to update his DIY guide for 4.4 so I can use my own ftf file to make a rom, but maybe there already is a way to do that?
Does it work with Locked Bootloader?
I am currently on iHacker's rom and flashed with his recommended stripped kernel (should be 4.3's kernel)
I already have TWRP installed, can I just flash your ROM and use Flashtool to flash your stripped kernel?
Will that affects future downgrading?
Thanks for your work:good::good::good:
f3nix82 said:
Hi,
!!! WARNING !!!
C6903 only!
Use at your own risk!
!!! WARNING !!!
Firmware info:
Device: C6903
Build number: 14.3.A.0.681
Android version: 4.4
Customization version: 1276-4318
Branding: Central Europe 1
The following items are integrated into this ROM:
XZDR: 2.7.99-BETA
SuperSU: 1.93
Fix to allow _writing_ to external SD cards.
How to update:
1. Put the flashable zip file on an external SD.
2. Boot into TWRP and install the update file.
3. _Power off_ the phone (do not boot into system yet!).
4. Flash the stripped ftf with Flashtool (version 0.9.15 required).
5. Boot into system.
Do not forget to _BACKUP_ before performing these steps!!!
This wouldn't be possible without the great work of @[NUT]! Thank You very much! :good:
Downloads (Google Drive):
Flashable zip: https://drive.google.com/file/d/0B2-FUIRLyD-EckJpV0tXX3pLVEE/edit?usp=sharing
md5sum: 3f2a54902629bac1a178dd5265102cbc, sha1sum: 5f2fe2f59ad137553bda36b3a65eaeb10bc5c2ad
Stripped ftf: https://drive.google.com/file/d/0B2-FUIRLyD-EcldzM3g3QnhTaW8/edit?usp=sharing
md5sum: 8f171deed413f9ccaed4abd8f5cbf30d, sha1sum: 9f3f622b116a9f7eb823e210b797c436ad501f05
Enjoy!
Cheers,
Mateusz
Click to expand...
Click to collapse
Yes, it will work on locked bootloader as its based on stock firmware so has stock kernel
Do I have to have a rooted device. Because I'm from the UK, and really eager to try out the kitkat. However, I'm not sure if it'll be safe.
Haleem98 said:
Do I have to have a rooted device. Because I'm from the UK, and really eager to try out the kitkat. However, I'm not sure if it'll be safe.
Click to expand...
Click to collapse
For this yes, as you need recovery
Unless you install the recovery on 534 FW
However, you can flash a stock 4.4.2 FTF on flashtool without root
gregbradley said:
For this yes, as you need recovery
Unless you install the recovery on 534 FW
However, you can flash a stock 4.4.2 FTF on flashtool without root
Click to expand...
Click to collapse
Thanks for the quick reply. However, I'm not sure which FTF to use, as it all confuses me. Which firmware etc...
I'm curently running 4.3 ofc on EE UK....
Haleem98 said:
Thanks for the quick reply. However, I'm not sure which FTF to use, as it all confuses me. Which firmware etc...
I'm curently running 4.3 ofc on EE UK....
Click to expand...
Click to collapse
Any for the version of your phone will do...
Try this one C6903 14.3.A.0.681 Commercial/Journalist 1277-8303_R2C from the FTF mega collection thread
gregbradley said:
Any for the version of your phone will do...
Try this one C6903 14.3.A.0.681 Commercial/Journalist 1277-8303_R2C from the FTF mega collection thread
Click to expand...
Click to collapse
Shall I use the Vodafone one, as that is the only version for my phone in the UK.
Also, if I want to remove the FTF and go back to 4.3, how'd I do so?
Really appreciate all of this btw!
Haleem98 said:
Shall I use the Vodafone one, as that is the only version for my phone in the UK.
Also, if I want to remove the FTF and go back to 4.3, how'd I do so?
Really appreciate all of this btw!
Click to expand...
Click to collapse
Its your choice, I am in the UK and flashed the one I copied to you before
I am now on a French one
Its your choice.
If you want to go back, just flash a 4.3 FTF
gregbradley said:
Its your choice, I am in the UK and flashed the one I copied to you before
I am now on a French one
Its your choice.
If you want to go back, just flash a 4.3 FTF
Click to expand...
Click to collapse
Or could I just update the latest "EE" version on Companion even with the kit kat FTF with voda?
Haleem98 said:
Or could I just update the latest "EE" version on Companion even with the kit kat FTF with voda?
Click to expand...
Click to collapse
If you have an update in PCCompanion just flash that, that's your official update
I was trying to install your CE1 version of KK but when it's installing in TWRP suddenly my phone woke up. I have tryed few times, but all time the same. I can't even flash ftf in Flashtool. I didn't wipe anything (i don't want to lose my saves from GTA ^^), I was installing it on already installed FR ver. What should i do?
can you please make another mirror, downloading from google drive is agonazingly slow, i've already tried the third time... it sais 10 hours...
Hi!
andyneouk said:
excellent. thanks for this. ill updated later.
can i just ask do you have the sound issue with this 4.4.2 version? i.e. where after a call the notifications come via earpiece instead of the speaker etc.
Cheers,
Andy
Click to expand...
Click to collapse
After using this ROM for 20h there was only one call notification that was routed via the earpiece. So it is not bad, but not great. :/
C_Karhu said:
Hi!
My flashmode is not working properly, could you please make a stock boot.img kernel?
Just the stock kernel, no mods.
Then I could flash kernel in fastboot.
Thanks for your great work!
Click to expand...
Click to collapse
Here You go.
dape16 said:
Thanks,
How did you made the rom and stripped ftf from an full ftf file? I am waiting for NUT to update his DIY guide for 4.4 so I can use my own ftf file to make a rom, but maybe there already is a way to do that?
Click to expand...
Click to collapse
Here are the files compatible with @[NUT]'s DIY for KK. I have followed his great guide! I'm not using his VM though, since I'm already on Linux.
Tip: the lates updater folder is present in every flashable zip.
shteren said:
can you please make another mirror, downloading from google drive is agonazingly slow, i've already tried the third time... it sais 10 hours...
Click to expand...
Click to collapse
Do You know any free service that is fast? Thanks for the tips.
HTH.
Cheers,
Mateusz
Hi!
MaRsXzU said:
I was trying to install your CE1 version of KK but when it's installing in TWRP suddenly my phone woke up. I have tryed few times, but all time the same. I can't even flash ftf in Flashtool. I didn't wipe anything (i don't want to lose my saves from GTA ^^), I was installing it on already installed FR ver. What should i do?
Click to expand...
Click to collapse
What is Your XZDR version?
Cheers,
Mateusz
ROM downloaded with XperiFirm and pre-rooted with PRFCreator.
CDA (customization version): 1280-7864
It will flash SuperSU and LockedDualRecovery (it will overwrite your current recovery).
You need to be on any rooted ROM already with custom recovery to flash a .zip file with this firmware!
You don't loose any data, you keep root, you update your firmware to the newest Lolipop build .270.
Download link: removed - transfer limit reached
Download mirror: https://mega.co.nz/#!5NcTnIBY!7-gNciq4NcjxzKJXWmQR2hZEzfjBJWTvGHmXOOknabA
whats CE1? whats this is? this rom is stock ?
Region, Central Europe 1. It's a stock ROM without operator branding.
Just flashed.....Thanks Davka! :good:
Cant find details about .270 changelog, anyone knows?
Android 5.0.1 or higher?
To flash, should I do a wipe in the recovery?
Enviado desde mi D5503 mediante Tapatalk
poolmaker said:
Cant find details about .270 changelog, anyone knows?
Android 5.0.1 or higher?
Click to expand...
Click to collapse
I believe it's the same changelog as the Z3 23.1.A.1.28 build:
http://www.xperiablog.net/2015/05/0...g-for-new-xperia-z2z3-series-lollipop-update/
http://forum.xda-developers.com/showthread.php?p=60853183
Sent from my D5503 using XDA Free mobile app
Tnx guys !!
5.1.1 update seems is not that far away.
On my Nexus 7 2013 working perfect, final and polished version.
Hope same will be on a Z1 compact, .242 firmware is fine for me, except ocassional ram/redraw apps problems, typical for 5.0.2 android.
Can someone check please if there's an Hebrew keyboard?
Hi,
I searched for instructions flashing from .zip file but I couldn't find any. Could you please describe the steps?
Thanks and regards.
You can flash this only if you have Custom Recovery flashed in your phone. If you have then boot into it, choose Flash .ZIP file or similar feature and you flash it. You have to put the .zip file on the SD card before this step.
If you don't have Custom Recovery or don't know how to use it - this is not a thread for you, sorry.
Region
Now I have a doubt, if I flash this in Spain, would it work? Is Europe, but no central...
Does Xposed work fine with this update?
Hello , will we receive next update 14.5.A.0.283 ???? Or will we have to update through pc companion or so please ?????
Thanks
I will post .283 version when it will be available for Central Europe region. So far it's available for T-mobile branded regions only.
Hi,
Sorry if the question is silly but will I be able to update to official sony 5.1.1 after flashing this rom? Will I still have root after update?
MarniC00 said:
Hi,
Sorry if the question is silly but will I be able to update to official sony 5.1.1 after flashing this rom? Will I still have root after update?
Click to expand...
Click to collapse
The version of this PRF is 5.0.2, the 5.1.1 has not been released by Sony yet.
He meant if he will get the update notification once Sony releases 5.1.1 with this ROM installed. My thoughts are probably yes you will get notification since this is stock basically.
templeka said:
He meant if he will get the update notification once Sony releases 5.1.1 with this ROM installed. My thoughts are probably yes you will get notification since this is stock basically.
Click to expand...
Click to collapse
Ah My bad. Yes, he will be able to update, although will loose root if he updates via Sony PC Companion.
[ZIP][STOCK] SGP611 Lollipop 23.4.A.1.264 PreRooted / Dual Recovery Flashable Zip] **updated
made for me a prerooted Zip File with PRFCreator, want share it it with you.
Here are the link to the prerooted flashable zip Lollipop Stock Android 5.1.1_23.4.A.1.264
- tested only on locked Boatloaders!!
only for Sony Z3 Tablet Compact Wifi - SGP 611 Modell
Zip File Including:
- rooted, latest Stock Sony Xperia Z3TC 5.1.1 Lollipop Rom
- with official SuperSu 2.46
- XZDualrecovery (Twrp & Philz Touch)
Instructions:
make first a Nandroid & Titanium Backup!!!
Flash the zip File on your rooted Z3 Tablet (Wifi Only Version)
and reboot & haves fun.
(Zip tested on my Z3 Tab 16GB/Wifi - no probs)
a short feedback I'd appreciate :good:
Download:
Google Drive (1.35GB) (latest Version x.x.264)
Google Drive (1.39GB) (older Version x.x.232)
Changelog: (31.12.2015)
- updated -> latest Stock Sony Xperia Z3TC 5.1.1 Lollipop Rom - 23.4.A.1.264
- updated -> latest XZDualrecovery 2.8.23 (Twrp v2.8.7.0 & Philz Touch v6.59)
- Zip Signed
Credits and Thanks goes to:
Chainfire
Philz
zxz0O0
godraxe
[NUT]
Known Issues:
SD-Fix:
have found problems with write access to external SD card!
for example with TB, if you have these problems...
These are easy to handle and solve with a Xposed module
- Install latest Xposed Framework v75 (for 5.1.1)
- and the Module --> HandleExternalStorage
Then you should have no problems to write to external SD Card!
Please make one for SGP621 LTE version. Thanks!!
Schuan said:
Please make one for SGP621 LTE version. Thanks!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3162636
Android 5.1.1 Model 611,612,621 download and prerooted
https://cloud.mail.ru/public/5qP5/wKztkqASj/621 (LTE)/РСТ/
Hi
I have a SGP611 Z3 Compact Tablet with official .232 firm
How do I flash it? Do I need FLASHTOOL?
Sorry but I am a newbie... and I do not see any instructions over this thread nor in the threads I have read...
Sorry again and thanks in advance
@jesusabc
You need an rooted Device! Zip File should flashed about Recovery.
you could downgrade to a an older FW example to Droid 5.0.2 Build 23.1.A.1.28
(flash Ftf-File with Flashtool) and root your Device with Kingoroot or similar and install Recovery.
then you can flash the Zip from Op.
Regards
Schuan said:
Please make one for SGP621 LTE version. Thanks!!
Click to expand...
Click to collapse
Unfortunately I do not have the SGP621 Model, only the 611.
Luckily there are in this forum for the model more choices.
Regards
aeroman said:
@jesusabc
You need an rooted Device! Zip File should flashed about Recovery.
you could downgrade to a an older FW example to Droid 5.0.2 Build 23.1.A.1.28
(flash Ftf-File with Flashtool) and root your Device with Kingoroot or similar and install Recovery.
then you can flash the Zip from Op.
Regards
Click to expand...
Click to collapse
So as I understand it...
I should install official FW 23.1.A.1.28, which includes 5.0.2 I assume... root my device using KINGROOT and, later, install the ZIP in the first post of this thread in the recovery... that´s ok?????
23.1.A.1.28 should be installed using flashtool?? Is there any thread over this forum where I can download it?
I found this one:
== SGP611 (Wifi 16GB) ==
- 23.0.1.A.0.167: Xperia Tablet Z3 compact - SGP611 - FTF files
IS THAT OK?????
Thanks again in advance for your help
Yeah right, FW 23.1.A.1.28 or older (0.167) is ok und should be easier to root.
P.S. If I can find time for the day(s), I'm uploading the FW x.1.28 still (with root options) .
Regards
Hello
I am in the process of moving to lollipop 5.1 with your ROM.
If I want to flash without losing my apps data, What should I tick/untick in flashtool in the Wipe & Exclude blocks ?
Thanks for your help.
Awesome!! thanks for your effort!
Hi,
Bought this tablet since a few and updated it with your ROM yesterday, for the moment everything is working fine !
Thanks for ur posting mate.
Bibo
mat_m said:
Hello
I am in the process of moving to lollipop 5.1 with your ROM.
If I want to flash without losing my apps data, What should I tick/untick in flashtool in the Wipe & Exclude blocks ?
Thanks for your help.
Click to expand...
Click to collapse
hmm you can try to untick wipe data but not recommendable
Schuan said:
Awesome!! thanks for your effort!
Click to expand...
Click to collapse
BiboTheClown said:
Hi,
Bought this tablet since a few and updated it with your ROM yesterday, for the moment everything is working fine !
Thanks for ur posting mate.
Bibo
Click to expand...
Click to collapse
nice to hear if I could help.
and yeah the latest Build from Sony is really wonderful & smooth :good:
(assuming btw. may you do it debloat, uninstall a few unuseful Apps with Tb)
Regards
I'm about to test this on my unlocked bootloader SGP611 16GB wifi
working fine - thanks!
Hello
Tried it, it worked nice. Thanks very much for this one.
SGP611 16G Wifi
I did wipe from 4.4 (to gain inital root access).
---------- Post added at 12:11 AM ---------- Previous post was at 12:02 AM ----------
BTW, do you know if we can apply the next update (23.4.A.1.264) on it without losing the root ?
WastedJoker said:
I'm about to test this on my unlocked bootloader SGP611 16GB wifi
working fine - thanks!
Click to expand...
Click to collapse
mat_m said:
Hello
Tried it, it worked nice. Thanks very much for this one.
SGP611 16G Wifi
I did wipe from 4.4 (to gain inital root access).
Click to expand...
Click to collapse
Hi,
nice to hear this and all is well, thx for report :good:
mat_m said:
BTW, do you know if we can apply the next update (23.4.A.1.264) on it without losing the root ?
Click to expand...
Click to collapse
you can try it (with Backup) even tell them times..
That would be great if that would run, :good:
I read only a security vulnerability have been closed.
with new Build, the might work.
Regards
Problem
Hello I had updated my tablet in 23.4.A.1.264 but to facilitate root I have submitted into 23.4.A.1.232 I try to root with Kingroot but when its comes to 70% I have an error
Update: Xperia Rom 23.4.A.1.264 & XZDualRecovery 2.8.23
Rom updated to latest Xperia Fw. - 23.4.A.1.264 only for SGP611!! :good:
- you can install dirty or clean (does not wipe user Data)!!
Don't forget.. do a Nandroid Backup before installing the Zip!
if you Install dirty:
- uninstall first Xposed Framework
- wipe cache & dalvik and install the Zip, enjoy :fingers-crossed:
You will find Download link & Changelog on Op.
Regards
aeroman said:
Rom updated to latest Xperia Fw. - 23.4.A.1.264 only for SGP611!! :good:
- you can install dirty or clean (does not wipe user Data)!!
[/B]
Regards
Click to expand...
Click to collapse
:highfive::good:
thanks
Sent from my Nexus 5
Can you confirm that it will not work for SPG612 ? Looks like its the same .. or not ... This is always confuse.
For now, I am in .232 and need .264 on SPG612 (pre-rooted & recovery).
Tried to install OTA but, it restarted to the Android (open engine ..) and then, does nothing and continued to TWRP ... so, I restart to system and I see that update has not been applied.
What should I do ?
EDIT: Ok, I've tried to do the same as the author ... but .. maybe not enough for the update ?
So, I downloaded PRFCreator + last SuperSU + last DualRecovery.
I then used PRFCreator with all checked + signed => I got a first ZIP.
My first flash showed some error for FOTAKernel and Kernel (=boot).
So, I restored all partitions and created another ZIP without FOTAKernel => failed on the Kernel.
So, I restored all partitions and created another ZIP without FOTAKernel & Kernel => success
But, once I boot and goes to software update .. I still see the update "23.4.A.1.264" ... and I can also see that I run the exact same version ..
So, I suppose the update is not correct or partial .. (recovery is still present so, I could easily restore previous backup).
I've also tried to wipe cache and dvolk..* cache but same result.
Any idea ?
Is there a place to find all stock rom for SGP612 ?
EDIT2: let's try this one: http://www.xperiablog.net/forum/res...ct-wi-fi_sgp612_23-4-a-3-6_japan_generic.554/
EDIT3: OK, flashed and the only error was because of FOTAKernel which I don't care. Kernel was correctly flashed (+system +modem +..label).
After startup, no more update available and the expected "up-to-date" => perfect!
Hi all, its been awhile
I have the E6883 Singapore set.. and I wonder why we still not getting the latest Nougat OTA Update. it is very annoying to wait and I searched everywhere and cant seem to find it. I found one with Xperifirm (Russia Generic), but my internet connection is just not stable enough for it. so I need a link which i can download with IDM.
So, here I am.. looking for the stock untouched firmware to download, can someone please provide a link?
32.3.A.0.376 (Any ROM will do, but prefer MALAYSIA ROM /r2d)
thanks :fingers-crossed:
https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
You can find it here. Remeber to say thanks to him~~~
ShynnZu said:
Hi all, its been awhile
I have the E6883 Singapore set.. and I wonder why we still not getting the latest Nougat OTA Update. it is very annoying to wait and I searched everywhere and cant seem to find it. I found one with Xperifirm (Russia Generic), but my internet connection is just not stable enough for it. so I need a link which i can download with IDM.
So, here I am.. looking for the stock untouched firmware to download, can someone please provide a link?
32.3.A.0.376 (Any ROM will do, but prefer MALAYSIA ROM /r2d)
thanks :fingers-crossed:
Click to expand...
Click to collapse
download latest flashtool from www.flashtool.net
from flashtool, run Xperifirm and select SATSUKI >> E6883
here all the firmwares are available! i can see Singapore & Malaysia
download the required rom and close the xperifirm, flashtool will PACK it in to FTF for your flash!
also don't wory, if you are on bad connection, the running downloads are resumable
nuanfengqingyu said:
https://forum.xda-developers.com/z5-premium/general/firmware-32-3-0-372-certified-android-7-t3537948
You can find it here. Remeber to say thanks to him~~~
Click to expand...
Click to collapse
thank!
YasuHamed said:
download latest flashtool from www.flashtool.net
from flashtool, run Xperifirm and select SATSUKI >> E6883
here all the firmwares are available! i can see Singapore & Malaysia
download the required rom and close the xperifirm, flashtool will PACK it in to FTF for your flash!
also don't wory, if you are on bad connection, the running downloads are resumable
Click to expand...
Click to collapse
yes! this is wat i did.. downloaded the Malaysia ROM, convert to FTF and flashed. it runs flawlessly now. THANKS :fingers-crossed:
ShynnZu said:
yes! this is wat i did.. downloaded the Malaysia ROM, convert to FTF and flashed. it runs flawlessly now. THANKS :fingers-crossed:
Click to expand...
Click to collapse
you are welcome bro, i am glad
if you need details on rooting, please allow me to help you