Those people who had flashed Micromax canvas A1 Stock rom in Spice Dream UNO by SP flash tool might face IMEI unknown Error or they Cannot use their SimCards .
I also faced same problem and by doing a lot of Gooogling i found one solution to this problem.
You need things :
1. A PC, data cable and a phone.
2. MauiMETA 3G:*v6.1316.1 DO GOOLGE
3. BPLGU modem file for mt6582 DO GOOGLE
4.CDC Drivers DO GOOGLE
5. SP drivers Download Here: androidfilehost.com/?fid=23252070760972673
6. A brain.
Procedure:
1. Download all above, extract as needed.
2. Connect Phone to pc in usb debugging mode and install drivers.
3. For windows 8.1/8, move your mouse to top right corner and click on settings-power. now press and hold shift and click restart. from advance options select 7 to disable driver signing.
4. Once PC is restarted, press windows key+pause break to open system properties.
5. From left select device manager.
6. From actions menu click add legacy hardware.
7. Click next and select Install the hardware that i manually..... (advanced), click next, select show all devices, click next, click have disk, then browse, locate SP_Drivers folder and select cdc-acm.inf, click open, click ok, select MediaTEk Inc. and MediaTek USB VCOM (Android), Click next and next again, click finish.
8. Install MauiMETA and run it. Use USB COM and from Options menu select Connect smart phone in meta mode.
9. Press Reconnect and connect phone in switched off state with battery. The blinking led will become yellow and you can see "connected with target"
10. Now from drop down menu select IMEI download. Click ok till you see IMEI download box.
11. Click Change NVRAM Database FIle and browse to MT6582 DB File\MT6582\BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY _WR8_W1315_MD_WG_MP_V5_1_wg_n (BPLGU modem file for mt6582). Click ok on any warning.
12. Leave IMEI Increasemnt 0. Write first 14 digits of your IMEI in IMIE box and last 15th digit will go in check sum(should be entered automatically). Eg:- if IMEI is 123456789123456, write 12345678912345 in imei and 6 in checksum. Do same for Sim_2
13. Press Download To Flash. You will see Download IMEI to flash successfully. Now close the box (or alt+f4 or close from task manager if stuck).
14. Restart the phone, see the magic. It will fix Your IMEI problem permanently even after factory reset.
dkchalotra said:
Those people who had flashed Micromax canvas A1 Stock rom in Spice Dream UNO by SP flash tool might face IMEI unknown Error or they Cannot use their SimCards .
I also faced same problem and by doing a lot of Gooogling i found one solution to this problem.
You need things :
1. A PC, data cable and a phone.
2. MauiMETA 3G:*v6.1316.1 DO GOOLGE
3. BPLGU modem file for mt6582 DO GOOGLE
4.CDC Drivers DO GOOGLE
5. SP drivers Download Here: androidfilehost.com/?fid=23252070760972673
6. A brain.
Procedure:
1. Download all above, extract as needed.
2. Connect Phone to pc in usb debugging mode and install drivers.
3. For windows 8.1/8, move your mouse to top right corner and click on settings-power. now press and hold shift and click restart. from advance options select 7 to disable driver signing.
4. Once PC is restarted, press windows key+pause break to open system properties.
5. From left select device manager.
6. From actions menu click add legacy hardware.
7. Click next and select Install the hardware that i manually..... (advanced), click next, select show all devices, click next, click have disk, then browse, locate SP_Drivers folder and select cdc-acm.inf, click open, click ok, select MediaTEk Inc. and MediaTek USB VCOM (Android), Click next and next again, click finish.
8. Install MauiMETA and run it. Use USB COM and from Options menu select Connect smart phone in meta mode.
9. Press Reconnect and connect phone in switched off state with battery. The blinking led will become yellow and you can see "connected with target"
10. Now from drop down menu select IMEI download. Click ok till you see IMEI download box.
11. Click Change NVRAM Database FIle and browse to MT6582 DB File\MT6582\BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY _WR8_W1315_MD_WG_MP_V5_1_wg_n (BPLGU modem file for mt6582). Click ok on any warning.
12. Leave IMEI Increasemnt 0. Write first 14 digits of your IMEI in IMIE box and last 15th digit will go in check sum(should be entered automatically). Eg:- if IMEI is 123456789123456, write 12345678912345 in imei and 6 in checksum. Do same for Sim_2
13. Press Download To Flash. You will see Download IMEI to flash successfully. Now close the box (or alt+f4 or close from task manager if stuck).
14. Restart the phone, see the magic. It will fix Your IMEI problem permanently even after factory reset.
Click to expand...
Click to collapse
Dude tried this... then i flash the Stock ROM again! .. i was really happy to see the network back.... But after 5mins it went missing. and the imei resets to "invalid" i am also facing an error while opening wifi NVRAM WARNING: ERR 0x10 ?
Any help will be appreciated bro!
srikantrn said:
Dude tried this... then i flash the Stock ROM again! .. i was really happy to see the network back.... But after 5mins it went missing. and the imei resets to "invalid" i am also facing an error while opening wifi NVRAM WARNING: ERR 0x10 ?
Any help will be appreciated bro!
Click to expand...
Click to collapse
First Flash Stock rom then flash IMEI . If you reflash rom then imei will again vanish. To prevent imei invalid problem you have to flash rom without flashing preloader.
To fix nvram problem goto this thread :- http://forum.xda-developers.com/showthread.php?t=2730486
dkchalotra said:
First Flash Stock rom then flash IMEI . If you reflash rom then imei will again vanish. To prevent imei invalid problem you have to flash rom without flashing preloader.
To fix nvram problem goto this thread :- http://forum.xda-developers.com/showthread.php?t=2730486
Click to expand...
Click to collapse
How to Flash without the Pre-loader ? and can i get my serial number back ? btw thanks for your reply!!
srikantrn said:
How to Flash without the Pre-loader ? and can i get my serial number back ? btw thanks for your reply!!
Click to expand...
Click to collapse
You can get imei number back by following the instructions in this post .
NOTE : Type the imei number which is shown on the back side of your phone.
Once you get the imei number back and if you again reflash rom it will again wipe your imei number.
To avoid this problem you should uncheck the preloader file. Check in the attachment
Your imei number will not vanish.
dkchalotra said:
You can get imei number back by following the instructions in this post .
NOTE : Type the imei number which is shown on the back side of your phone.
Once you get the imei number back and if you again reflash rom it will again wipe your imei number.
To avoid this problem you should uncheck the preloader file. Check in the attachment
Your imei number will not vanish.
Click to expand...
Click to collapse
Thankyou very much! just one question!
which option should i use to flash the ROM ? "Download Only" or "Upgrade Firmware"
srikantrn said:
Thankyou very much! just one question!
which option should i use to flash the ROM ? "Download Only" or "Upgrade Firmware"
Click to expand...
Click to collapse
Choose Download only mode !!
Please click thanks button instead of typing it !
if i was you, i would be careful, this is illegal in almost every country out there
opssemnik said:
if i was you, i would be careful, this is illegal in almost every country out there
Click to expand...
Click to collapse
Changing IMEI is illegal. But if you lose your IMEI no, then you need to manually set it. But the legal line here is narrow, you insert 1 digit wrong and you are breaking the law
becareful when you deal with IMEI number, it can be very dangerous, if something goes wrong you will be jailed. I dunno why would someone flash micromax a1 stock into spice or vice versa, it is a bad movie.
my phone is micromax canvas a1
dkchalotra said:
Those people who had flashed Micromax canvas A1 Stock rom in Spice Dream UNO by SP flash tool might face IMEI unknown Error or they Cannot use their SimCards .
I also faced same problem and by doing a lot of Gooogling i found one solution to this problem.
You need things :
1. A PC, data cable and a phone.
2. MauiMETA 3G:*v6.1316.1 DO GOOLGE
3. BPLGU modem file for mt6582 DO GOOGLE
4.CDC Drivers DO GOOGLE
5. SP drivers Download Here: androidfilehost.com/?fid=23252070760972673
6. A brain.
Procedure:
1. Download all above, extract as needed.
2. Connect Phone to pc in usb debugging mode and install drivers.
3. For windows 8.1/8, move your mouse to top right corner and click on settings-power. now press and hold shift and click restart. from advance options select 7 to disable driver signing.
4. Once PC is restarted, press windows key+pause break to open system properties.
5. From left select device manager.
6. From actions menu click add legacy hardware.
7. Click next and select Install the hardware that i manually..... (advanced), click next, select show all devices, click next, click have disk, then browse, locate SP_Drivers folder and select cdc-acm.inf, click open, click ok, select MediaTEk Inc. and MediaTek USB VCOM (Android), Click next and next again, click finish.
8. Install MauiMETA and run it. Use USB COM and from Options menu select Connect smart phone in meta mode.
9. Press Reconnect and connect phone in switched off state with battery. The blinking led will become yellow and you can see "connected with target"
10. Now from drop down menu select IMEI download. Click ok till you see IMEI download box.
11. Click Change NVRAM Database FIle and browse to MT6582 DB File\MT6582\BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY _WR8_W1315_MD_WG_MP_V5_1_wg_n (BPLGU modem file for mt6582). Click ok on any warning.
12. Leave IMEI Increasemnt 0. Write first 14 digits of your IMEI in IMIE box and last 15th digit will go in check sum(should be entered automatically). Eg:- if IMEI is 123456789123456, write 12345678912345 in imei and 6 in checksum. Do same for Sim_2
13. Press Download To Flash. You will see Download IMEI to flash successfully. Now close the box (or alt+f4 or close from task manager if stuck).
14. Restart the phone, see the magic. It will fix Your IMEI problem permanently even after factory reset.
Click to expand...
Click to collapse
the above method is for only rooted devices or non rooted devices.....? Pls reply
hemanthvarma said:
the above method is for only rooted devices or non rooted devices.....? Pls reply
Click to expand...
Click to collapse
Its for both rooted and non-rooted phones
canvas a1 imei fix issue
dkchalotra said:
Those people who had flashed Micromax canvas A1 Stock rom in Spice Dream UNO by SP flash tool might face IMEI unknown Error or they Cannot use their SimCards .
I also faced same problem and by doing a lot of Gooogling i found one solution to this problem.
You need things :
1. A PC, data cable and a phone.
2. MauiMETA 3G:*v6.1316.1 DO GOOLGE
3. BPLGU modem file for mt6582 DO GOOGLE
4.CDC Drivers DO GOOGLE
5. SP drivers Download Here: androidfilehost.com/?fid=23252070760972673
6. A brain.
Procedure:
1. Download all above, extract as needed.
2. Connect Phone to pc in usb debugging mode and install drivers.
3. For windows 8.1/8, move your mouse to top right corner and click on settings-power. now press and hold shift and click restart. from advance options select 7 to disable driver signing.
4. Once PC is restarted, press windows key+pause break to open system properties.
5. From left select device manager.
6. From actions menu click add legacy hardware.
7. Click next and select Install the hardware that i manually..... (advanced), click next, select show all devices, click next, click have disk, then browse, locate SP_Drivers folder and select cdc-acm.inf, click open, click ok, select MediaTEk Inc. and MediaTek USB VCOM (Android), Click next and next again, click finish.
8. Install MauiMETA and run it. Use USB COM and from Options menu select Connect smart phone in meta mode.
9. Press Reconnect and connect phone in switched off state with battery. The blinking led will become yellow and you can see "connected with target"
10. Now from drop down menu select IMEI download. Click ok till you see IMEI download box.
11. Click Change NVRAM Database FIle and browse to MT6582 DB File\MT6582\BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY _WR8_W1315_MD_WG_MP_V5_1_wg_n (BPLGU modem file for mt6582). Click ok on any warning.
12. Leave IMEI Increasemnt 0. Write first 14 digits of your IMEI in IMIE box and last 15th digit will go in check sum(should be entered automatically). Eg:- if IMEI is 123456789123456, write 12345678912345 in imei and 6 in checksum. Do same for Sim_2
13. Press Download To Flash. You will see Download IMEI to flash successfully. Now close the box (or alt+f4 or close from task manager if stuck).
14. Restart the phone, see the magic. It will fix Your IMEI problem permanently even after factory reset.
Click to expand...
Click to collapse
dude hi .... my system os is win 8.1 and i followed every step as u said above but my phone is not connecting (IMEI drop box is not coming ) its just charging in switch off mode nothing more than that ..... ! my phone is on android 5.1 two days back i got an ota update ..
pls suggest me if am doing any wrong steps .....
and also the procedure u said above is only for 4.4.4 or can do it in 5.1 also....? My phone is not rooted
after rest same problem
after flashing imei wen i again do factory reset my imei got erased pls help me
dkchalotra said:
Those people who had flashed Micromax canvas A1 Stock rom in Spice Dream UNO by SP flash tool might face IMEI unknown Error or they Cannot use their SimCards .
I also faced same problem and by doing a lot of Gooogling i found one solution to this problem.
Click to expand...
Click to collapse
will this permanently set the imei nos , i have canvas a1 and my baseband and imei get wiped up n flashing rom coz i wiped system and baseband in spf tools
dkchalotra said:
Those people who had flashed Micromax canvas A1 Stock rom in Spice Dream UNO by SP flash tool might face IMEI unknown Error or they Cannot use their SimCards .
I also faced same problem and by doing a lot of Gooogling i found one solution to this problem.
You need things :
1. A PC, data cable and a phone.
2. MauiMETA 3G:*v6.1316.1 DO GOOLGE
3. BPLGU modem file for mt6582 DO GOOGLE
4.CDC Drivers DO GOOGLE
5. SP drivers Download Here: androidfilehost.com/?fid=23252070760972673
6. A brain.
Procedure:
1. Download all above, extract as needed.
2. Connect Phone to pc in usb debugging mode and install drivers.
3. For windows 8.1/8, move your mouse to top right corner and click on settings-power. now press and hold shift and click restart. from advance options select 7 to disable driver signing.
4. Once PC is restarted, press windows key+pause break to open system properties.
5. From left select device manager.
6. From actions menu click add legacy hardware.
7. Click next and select Install the hardware that i manually..... (advanced), click next, select show all devices, click next, click have disk, then browse, locate SP_Drivers folder and select cdc-acm.inf, click open, click ok, select MediaTEk Inc. and MediaTek USB VCOM (Android), Click next and next again, click finish.
8. Install MauiMETA and run it. Use USB COM and from Options menu select Connect smart phone in meta mode.
9. Press Reconnect and connect phone in switched off state with battery. The blinking led will become yellow and you can see "connected with target"
10. Now from drop down menu select IMEI download. Click ok till you see IMEI download box.
11. Click Change NVRAM Database FIle and browse to MT6582 DB File\MT6582\BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY _WR8_W1315_MD_WG_MP_V5_1_wg_n (BPLGU modem file for mt6582). Click ok on any warning.
12. Leave IMEI Increasemnt 0. Write first 14 digits of your IMEI in IMIE box and last 15th digit will go in check sum(should be entered automatically). Eg:- if IMEI is 123456789123456, write 12345678912345 in imei and 6 in checksum. Do same for Sim_2
13. Press Download To Flash. You will see Download IMEI to flash successfully. Now close the box (or alt+f4 or close from task manager if stuck).
14. Restart the phone, see the magic. It will fix Your IMEI problem permanently even after factory reset.
Click to expand...
Click to collapse
Here is the stock Rom for spice dream uno..... It's a kitkat Rom.... It u want yo update it to lollipop just download ota update app in u r mobile and update u r device to lollipop....
This link is give by my friend......
Spice kitkat ROM link..... :-
https://docs.google.com/uc?id=0B-HvMr6Gyk2WcjRpeEcwT0NzSlk&export=download
srikantrn said:
Dude tried this... then i flash the Stock ROM again! .. i was really happy to see the network back.... But after 5mins it went missing. and the imei resets to "invalid" i am also facing an error while opening wifi NVRAM WARNING: ERR 0x10 ?
Any help will be appreciated bro!
Click to expand...
Click to collapse
Here is the stock Rom for spice dream uno..... It's a kitkat Rom.... It u want yo update it to lollipop just download ota update app in u r mobile and update u r device to lollipop....
This link is give by my friend......
Spice kitkat ROM link..... :-
https://docs.google.com/uc?id=0B-HvMr6Gyk2WcjRpeEcwT0NzSlk&export=download....
Sent from my C1505 using XDA Premium 4 mobile app
I had updated my spice dream uno mobile to marshmallow but after few days it was stuck on spice logo when starting ON. what to do now i want back to kitkat version ...????
prashantjain.jain02 said:
I had updated my spice dream uno mobile to marshmallow but after few days it was stuck on spice logo when starting ON. what to do now i want back to kitkat version ...????
Click to expand...
Click to collapse
Just perform a factory reset from recovery........and have patience for first boot after reset
Related
Helo,
I've got a big proplem, my GT540 doesn't boot anymore it always freezes when the LG sign appears. I have this proplem since I'd tried to change the statusbar font into whiteby changing the services.jar. Hardreset and KDZ Updater aren't working. And I also tried to change the new services.jar to the old with adb but I don't get root permissions.
My phone runs with 2.1 Eclair.
Thanks for your help,
Lucas
Wait, arent the status bar white by defoult ?
No i don't mean the bar I mean the clock, but do you have any ideas to solve my proplem?
Do The Hard Reset With Press The
Vol Up + Search Key (on the right side of the phome) + home button
When I Trie to do the hardreset it Happens nothing! Is there no other possibillity to reset?
You could try fresh install with KDZ updater, that worked for me when I broked the radio and my network didn't worked. If you have troubles geting in to download mode you could try removing the battery and press volume up + camera + power button Just be carefull! Good luck
Sent from my GT540 using XDA App
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Luc-As said:
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Click to expand...
Click to collapse
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
You could also disable your anti virus and use only the back USB ports of your PC. Good luck !
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Luc-As said:
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Click to expand...
Click to collapse
You are welcomed
hi all!
my phone was root, instant a2sd, then it work very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, done, but not change, it can not log on. stand by at "android" screen.
any body help me? what can i do? any way to factory reset by window? script? els..
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
tks for read!
GT540 does not boot
I have followed
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
BUT I get error:
Upgrade error
Wparam:100
lparam: 4008
try booting and then when it is stuck at the lg logo plug it in to your pc and begin the upgrade in diag mode.
It worked for me when i wiped my phone.
Cant get it to start reloading the firmware
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
The upgrade does not start...
Very GOOD now it did it like this.
Start your phone in recovery. Volume down+camera+power, see if the pc sees the device. Start the update tool max it and select emergency and flash again.
This fixed...
Now I need to add spanish to it. Do you know how??
cmora22 said:
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/showthread.php?t=812308
and in folder u see the "updater" file. doubleclick and u have the english KDZ version.
Oh. I need this Fail.rar too.
I have the same Problem. Can anybody reupload?
THX
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
tehbone said:
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
Click to expand...
Click to collapse
yeah, i've got the same problem, i don't know what i can do...
Pleaz help us =(
My PC don't see my phone, my phone stay on 'lg' boot, and can't boot on emergency or hard reset... =/
EDIT: i did it!
You only need to desactivate the LG Android USB Modem (i didn't saw 'Modem' on Device Manager, so i could not desactivate it).
If like me you don't see Modem, you will see it during the period of time during which the device is recognized mod download, ie for about 5 seconds after you plugged in...
I hope it will help someone
PS: Sorry for my english..
Look under modem and you see your phone
At property under tab look your com number remember it
Take teraterm create a connection with your phone you can connect it normally
When you are connected write
AT
( if you see nothing go to setting general and activate ''echo typed only'' )
If your getting OK
AT%FRST%
and the phone does a factory reset
( i'm french so i'm sorry for my english )
Sent from my GT540 using XDA App
I have Xperia X8 with Eclair update. When I try to flash with X10 Flash Tool it always says Searching for Xperia... Yes I connected the phone in flash mode by holding back button and conecting with usb, I have usb drivers. Non-gui version says the same. I have tried to flash 1.6 firmware from "Going back to 1.6" thread. Please help me, fast!
please post question at general section
Flash Tool help
Try connecting the phone in flash mode, when the flash tool displays "Searching for Xperia ......"
Solved!
Solved! I just installed some drivers from some site. Yes i know i was telling that i have drivers, just i did not know i have incorrect drivers.
Now i am back to Android 1.6!
Can somebody sugest me way to root my Xperia X8?
Now, follow the Step by Step TUT.
Step by Step TUT
Now Rooted 2.1. Thanks for help.
Next time it should help: http://forum.xda-developers.com/showpost.php?p=9510216&postcount=16
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
SaNTi285 said:
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
Click to expand...
Click to collapse
Download automatic install from this link http://www.akshayy.com/sonyericsson/wp-content/uploads/SE_USB_Driver_installer.zip
Press the thanks button!
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Full instructions.
SaNTi285 said:
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Click to expand...
Click to collapse
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Still not succeeded with flashing.....
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Explain for Noobs!
thomaszq said:
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Click to expand...
Click to collapse
Yellow trinagle is located in device manager!(just look at other thread)
You can get non-gui version in Bin4ry thread "X10 Flash Tool...and so on"
You need to open x10flash.bat in non-gui folder.(not gui)
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Im still stuck on step 1. The yellow mark still wont disappear no matter what I have tried to reinstall/update the driver.
I have let the wizard to search the internet for correct driver, and I have point it to specific folder with the driver in it, I have tried several versions of the driver that I can find on the net.
I keep getting "the hardware was not installed because the wizard cannot find the necessary software" error.
I can use Flash Tool GUI to root my X8 and to install XRecovery. Those were done successfully. And we are talking same session same day here. Just straight after I rooted the phone and installed Xrecovery, did a backup, then I wanted to flash to 2.1 but then this happened.
Only when the phone is connected to the PC in flash mode.
Can anyone help point me in the right direction?
Forgot to mention: the driver I'm talking about is SEMC signed driver. That is the driver for flashing right? Or have I totally missed this point all together?
I got it working now. It was not SEMC driver that's needed. It should be the gordon's gate driver. For some reason that driver went missing. I have installed SEUS and managed to flash my phone yesterday using SEUS. So definitely it was installed, but disappeared today or sometime after I used SEUS last.
Would be great if someone help in rooting yureka simply.
Am a little bit confused in unlocking bootloader, adb, root etc.
http://forum.xda-developers.com/yur...recovery-cwm-based-recovery-v6-0-5-1-t3001339 well here you go...its quite simple and i did it my self using a mac book pro.
Can we use the included cyanogen recovery to install SuperSu??
KevinT97 said:
Can we use the included cyanogen recovery to install SuperSu??
Click to expand...
Click to collapse
Yep. U can
How can we use the Cyanogen recovery to install supersu without unlocking the bootloader. OR
can any one create a .zip which can be flashed to unlock the bootloader from cyanogen recovery and then root it.
your help will be highly appreciated
I am also facing same problems. Phone is not detecting from PC in fastboot mode.
Hello, the bootloader needs to be unlocked in order to flash super user. The best and easiest way of unlocking the bootloader is using fastboot and a computer. Link mentioned in the previous post.
Waiting For Device In Yureka
rajatp007 said:
I am also facing same problems. Phone is not detecting from PC in fastboot mode.
Click to expand...
Click to collapse
I was also facing the same problem but i got rid of it by following this way :-
1)connect your device in fast boot mode
2)go to mycomputer----right click on my computer and select manage --------device manager---andriod on right pane-----you will find yellow mark on the andriod devices------
3)now right click on that yellow marked one ans select "update driver software" and click on 2nd option -----browse my computer for driver harware-----
4)now select the option "LET ME PICK FROM A LIST OF DEVICE DRIVERS ...." and list of drivers are displayed in the box available in PC
5)now find a name like YUPHONE ------similar name because i forgot the name after doing, name starts with Y---- in the list
6)select and install that and your driver will be installed and now you can root and waiting for the device problem will not appear again while rooting.
Enjoy Don't Forget to say thanks if it Helps.
rahulsinha99938 said:
I was also facing the same problem but i got rid of it by following this way :-
1)connect your device in fast boot mode
2)go to mycomputer----right click on my computer and select manage --------device manager---andriod on right pane-----you will find yellow mark on the andriod devices------
3)now right click on that yellow marked one ans select "update driver software" and click on 2nd option -----browse my computer for driver harware-----
4)now select the option "LET ME PICK FROM A LIST OF DEVICE DRIVERS ...." and list of drivers are displayed in the box available in PC
5)now find a name like YUPHONE ------similar name because i forgot the name after doing, name starts with Y---- in the list
6)select and install that and your driver will be installed and now you can root and waiting for the device problem will not appear again while rooting.
Enjoy Don't Forget to say thanks if it Helps.
Click to expand...
Click to collapse
It worked great. Thanks!!
I can Help
Mickey31 said:
Would be great if someone help in rooting yureka simply.
Am a little bit confused in unlocking bootloader, adb, root etc.
Click to expand...
Click to collapse
Hi i can help you with rooting.
I also rooted my yu few days back. so just contact me whenever you want.
hey guys i have been trying to connect my phone with my system for the past few days... but the mtp driver is not getting downloaded in my system any help plz
Here: adbdriver.com
This will solve your problem
vivek 5567 said:
hey guys i have been trying to connect my phone with my system for the past few days... but the mtp driver is not getting downloaded in my system any help plz
Click to expand...
Click to collapse
I was also facing the same problem but i got rid of it by following this way :-
1)go to mycomputer----right click on my computer and select manage --------device manager---andriod on right pane-----you will find yellow mark on the andriod devices------
2)now right click on that yellow marked one ans select "update driver software" and click on 2nd option -----browse my computer for driver harware-----
3)now select the option "LET ME PICK FROM A LIST OF DEVICE DRIVERS ...." and list of drivers are displayed in the box available in PC
4)now find a name like YUPHONE ------similar name because i forgot the name after doing, name starts with Y---- in the list
5)select and install that and your driver will be installed and now you can root and waiting for the device problem will not appear again while rooting.
if above steps don't solve your problem then repeat same steps by connecting your device in fastboot mode.
Enjoy Don't Forget to thanks if it Helps.
rahulsinha99938 said:
I was also facing the same problem but i got rid of it by following this way :-
1)go to mycomputer----right click on my computer and select manage --------device manager---andriod on right pane-----you will find yellow mark on the andriod devices------
2)now right click on that yellow marked one ans select "update driver software" and click on 2nd option -----browse my computer for driver harware-----
3)now select the option "LET ME PICK FROM A LIST OF DEVICE DRIVERS ...." and list of drivers are displayed in the box available in PC
4)now find a name like YUPHONE ------similar name because i forgot the name after doing, name starts with Y---- in the list
5)select and install that and your driver will be installed and now you can root and waiting for the device problem will not appear again while rooting.
if above steps don't solve your problem then repeat same steps by connecting your device in fastboot mode.
Enjoy Don't Forget to thanks if it Helps.
Click to expand...
Click to collapse
i tried what u said but still its not working... if u have the usb drivers then plz send me
try i used
vivek 5567 said:
i tried what u said but still its not working... if u have the usb drivers then plz send me
Click to expand...
Click to collapse
hey you can use this driver I m using this http://adbdriver.com/upload/AdbDriverInstaller.exe
My Yu Yureka is Hard Bricked
My Yu Yureka is Hard Bricked .....can anyone help me to unbrick it
my phone is not start in Fastboot Mode and Normal Mode
In QPST it always shows download mode
please help me out
and what is meaning of following files
emmc_appsboot.mbn
hyp.mbn
rpm.mbn
sbl1.mbn
tz.mbn
hey there is no such name like yuphone
my device always reboot not proper boot
after flash latest rr 26/5/17 build
I have clean flash with S31 firmware
can any body solve me
somnath pal said:
my device always reboot not proper boot
after flash latest rr 26/5/17 build
I have clean flash with S31 firmware
can any body solve me
Click to expand...
Click to collapse
Go to boucrecked n tacholaty n cararoot
Read
Falsh stock via qfill application ...with pc..
The best option to fix this is to
1. Download SP Flash - spflashtool.com
Install USB VCOM Drivers:
https://drive.google.com/file/d/0B4AxISENE1O_M2tfNkV5Q0tkRXM/view
Grab the stock ROM from here:
https://forum.xda-developers.com/lenovo-a6000/how-to/firmware-lenovo-a6000-se-stock-rom-t3406693
Put this on your desktop somewhere easily accessible and make sure its unzipped.
Turn OFF your phone and pull the battery. Open SP Flash and go to options -> Download -> Make sure both those options have a checkmark in the boxes.
In the DROPDOWN box of SP Flash where you see Download change to 'Firmware Upgrade'.
Where you see the button that says Scatter Loading, press it and navigate to the scatter file in your Lenovo Stock ROM download. It will be the only file you see (text file) select it.
Now in SP Flash on the TOP where you see the GREEN Download Arrow, Click Download.
Now, with phone off and battery OUT, put battery back in phone...DO NOT turn it on, simply plug into your USB cable attached to your A536.
You will see SP Flash pop up a red bar on the bottom. Relax. You will then see a yellow bar showing its installing the firmware. When it is done you will see a box popup with a big green checkmark saying its done.
Unplug your phone and hit the power button.
Please let me know if you run into trouble. Follow my instructions and you will unbrick your device.