Related
This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse
KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.
i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate
I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.
Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..
Thx a lot! Worked like a charm! :good:
i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate
ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible
Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help
same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery
ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.
I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking
Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you
Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
Ok, hey guys, got myself in a really deep hole here i believe..
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
After the app rebooted the phone it went to the exact screen shown in the pic ...
now how can i get this phone working???, fastboot commands all work...
ive flashed a recovery but cant boot into it as the phone wont power off...
if anyone has any ideas , im open to all...
i do have the LG Flash tool available and a Custom ROM on hand
I do not have a stock file ..
Phone is rooted
Thanks for help , anything is great
Update ..
tried to flash a ROM as an Update.zip, get error back
also now get that screen when i hold all buttons down , not sure, never got that before
Shotgun4 said:
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
Click to expand...
Click to collapse
I did the exact same thing because the ****ing jokers at LG / Wind labeled the phone wrong.
It's actually a D803. Yeah, despite what it says on the case.
You can find my solution in my post history here.. You need to flash a .laf file with fastboot to get your download mode re-enabled, then you can apply a stock .kdz file to bring your phone back to stock.
Then use the D803 files and no worries! You can fix this.
If you're scared, I can also recommend a respectable shop in Toronto that can fix it easy.
i just received my new G2 D802 16GB,
i tried to upgrade to kitkat with this guide
(flashed Switzerland 16GB D80220F_00.kdz)
i ended up with a phone that wont boot, it got stuck it fastboot mode, i messed with fastboot until i got to the point i had download mode again, (i messed with the partitions: sb1,tz,laf...)
i tried flashing many roms (Europe Open D80210A_00,UK Open 16GB D80210B_00,Hungary OPEN 16GB KitKat D80220B)
the roms load fine, but now the touch response is unusable (touching a point is being registered in another spot altogether).
this happened with every rom i have tried.
i tried with the tot method from the same thread, i got memory Size mismatch 32G! error (i have a 16GB model),
i tried the tot again with the 32GB rom and it passed, but the problem remains (the bad touch response).
what do i need to do?
Why didn't you just use the PC program to update?
Do it
guynaa said:
i just received my new G2 D802 16GB,
i tried to upgrade to kitkat with this guide
(flashed Switzerland 16GB D80220F_00.kdz)
i ended up with a phone that wont boot, it got stuck it fastboot mode, i messed with fastboot until i got to the point i had download mode again, (i messed with the partitions: sb1,tz,laf...)
i tried flashing many roms (Europe Open D80210A_00,UK Open 16GB D80210B_00,Hungary OPEN 16GB KitKat D80220B)
the roms load fine, but now the touch response is unusable (touching a point is being registered in another spot altogether).
this happened with every rom i have tried.
i tried with the tot method from the same thread, i got memory Size mismatch 32G! error (i have a 16GB model),
i tried the tot again with the 32GB rom and it passed, but the problem remains (the bad touch response).
what do i need to do?
Click to expand...
Click to collapse
Maybe you can try that thing from update touch driver or whut from hidden menu.
I also read that some people also had this issue on kitkat but not on jellybean stock
So try some things and report back :silly:
TheHaso said:
Why didn't you just use the PC program to update?
Do it
Click to expand...
Click to collapse
i tried, but the update failed using the official lg software (i was on 4.2..2)
wulsic said:
Maybe you can try that thing from update touch driver or whut from hidden menu.
I also read that some people also had this issue on kitkat but not on jellybean stock
So try some things and report back :silly:
Click to expand...
Click to collapse
i think you meant this
i cant do it because the touch is crazy and i cant even open the dialer using current touch response...
i was able to get adb running if that helps
guynaa said:
i tried, but the update failed using the official lg software (i was on 4.2..2)
i think you meant this
i cant do it because the touch is crazy and i cant even open the dialer using current touch response...
i was able to get adb running if that helps
Click to expand...
Click to collapse
Yes I meant that Step3 from that url.
What you can do is 3 things.
Downgrade to 4.2.2 :/
Connect an Usb OTG mouse to your phone.
Try or OSP(On screen phone) works.
If these things don't work then you must try to find something else cause further then this I don't have any Idea at the moment, maybe later...
Goodluck:good:
wulsic said:
Yes I meant that Step3 from that url.
What you can do is 3 things.
Downgrade to 4.2.2 :/
Connect an Usb OTG mouse to your phone.
Try or OSP(On screen phone) works.
If these things don't work then you must try to find something else cause further then this I don't have any Idea at the moment, maybe later...
Goodluck:good:
Click to expand...
Click to collapse
thanks,those are 2 great ideas i wish i had thought about!,
i sent the phone to be serviced, i will post here the outcome if that matters.
Ahh okay, sorry for late reaction was busy with school.
If your phone gets serviced then they will also probably ship it back with 4.4.2 stock and also with normal working touch .
you can post the outcome if you want I think
Just wait for it till you get your phone back, then you will be happy again
Update your touch software from service menu and you should be okay.
Check xda for. Service menu code
Sent from my LG-D802 using xda premium
i managed to solve this.
i bought this "d802" online, the box, phone sticker and "about" all said it was a d802 (normal back panel, no "ATT" logo),
after i opened the phone i discovered the logic board is actually a d800.
i managed to change the model number in build.prop (to d800), and flash the d800 with the tot method, the phone works fine now,
if anyone have the same problem and finds this thread, contact me and i will try to help
guynaa said:
i managed to solve this.
i bought this "d802" online, the box, phone sticker and "about" all said it was a d802 (normal back panel, no "ATT" logo),
after i opened the phone i discovered the logic board is actually a d800.
i managed to change the model number in build.prop (to d800), and flash the d800 with the tot method, the phone works fine now,
if anyone have the same problem and finds this thread, contact me and i will try to help
Click to expand...
Click to collapse
I had same issue.. I had touch problem and I got it repaired and paid 4500PKR = around 45USD and it was D800 .. Why didnt I see this before (
OKay one question , If i root it and update it to Kitkat and edit build.prop to D802 , will it show D802 again ? if yes then I can do that and return it to the local shop where I bought the phone from..
-iNCEPTiON- said:
I had same issue.. I had touch problem and I got it repaired and paid 4500PKR = around 45USD and it was D800 .. Why didnt I see this before (
OKay one question , If i root it and update it to Kitkat and edit build.prop to D802 , will it show D802 again ? if yes then I can do that and return it to the local shop where I bought the phone from..
Click to expand...
Click to collapse
no, the d800 cant run firmware built for the d802,
you should flash this tot and upgrade to kitkat (if you want) using this method
guynaa said:
no, the d800 cant run firmware built for the d802,
you should flash this tot and upgrade to kitkat (if you want) using this method
Click to expand...
Click to collapse
Yes I am asking if I use tot method to update to kitkat and root it .. then edit build.prop and change to D802 , will it show D802 in About Phone?
-iNCEPTiON- said:
Yes I am asking if I use tot method to update to kitkat and root it .. then edit build.prop and change to D802 , will it show D802 in About Phone?
Click to expand...
Click to collapse
i am not sure, but i believe that the phone wont boot into android if you do that (i have the reverse case),
why would you want to do that?
guynaa said:
i am not sure, but i believe that the phone wont boot into android if you do that (i have the reverse case),
why would you want to do that?
Click to expand...
Click to collapse
Hmm i want to do that coz when i got the phone from him it showed d802 in about phone and back of the phone as well ...so i want to do that again to get it replaced as i need d802
Sent from my LG-D802 using Tapatalk