Database Users

Odin problem with sgs

Hi guys, i've searched before about my problem and i've tried everything i read on posts that talk about my problem but i haven't solved it yet.
I was tring to flash a jvp stock rom with odin and re-partition checked, it isn't the first time to me flashing.
But flash goes wrong and at reboot my sgs has showed the black screen with the error at the middle.
I thought i had brick my phone, but when i tried to reboot in download mode it worked.
i tried to re-flash with odin, but it doesn't want to recognize mi device, i've re-installed the driver odin recognize my tel but it stuck at 'setup connectio'.
I've tried to flash the jvp rom on an another pc but doesn't work, it stuck at 'setup connection'.
Guys help me i don't know what to do.
(forgive me for my bad english )

Hi, hope someone can get you some advise. If not, can the the stickies guide on " Recovery options for "bricked" phone " http://forum.xda-developers.com/showthread.php?t=1134975
---------- Post added at 07:16 PM ---------- Previous post was at 07:04 PM ----------
I've had read 2 page down, and someone has the same problem before. http://forum.xda-developers.com/showthread.php?t=1345729
hope it helps

Worked the Recovery Mode ?
If not buy an USb Jig (It works only , if you had checked USB Debugging)

UBS Jig only work , if you had before activate USB Debugging

yes, jig is the only option for you...

Samsung N900 Stuck on Note 3 display

My Samsung N900 Note 3 Exonys 5 was working all fine on MJ7 update, and was rooted. I was editing the device today on Build prop editor and rebooted the device, since then when i try to start the device, it powers, shows the first screen and then black screen, the device remains on, but no screen, i know its on as usb connection over to pc detects the device.
I try recovery mode and wiped entire phone, but no help
the kies mode is also working.
Please help me what shall i do, i dont have time for service center.

I am downloading the factory firmware which will take 2 hours in the meanwhile any idea's or suggestions.

deadlyheart4u said:
I am downloading the factory firmware which will take 2 hours in the meanwhile any idea's or suggestions.
Click to expand...
Click to collapse
pull the battery out for 1 min that sometimes works

Didnt worked so finally i fixed it by flashing

Same happened with me can someone gimme a Torrent of Odin frimware
---------- Post added at 02:29 AM ---------- Previous post was at 02:11 AM ----------
plz anyone knows stock rom torrent link any stock rom
downloading from terrafile takes 8hours and i'm scared of this dead phone

[Q] nexus 7 bricked - booting failed - only bootloader works - no USB connection

hi guys.
i bricked my nexus 7 ...
tried to manually install kitkat.
i read a how to... erased cache etc etc.
after these steps, i tried to install the image. but it didnt work. i tried to flash the bootloader. didnt work.
after this, i dont know at which step, i lost the usb connection. i cant boot anything. no recovery mode etc.
after switching off my device, it says 'booting failed' ... i only can access to the bootloader at restart it.
using adb devices - no devices found.
who can help me... ?!
sorry for my bad english

come on guys need help

eight.zero said:
hi guys.
i bricked my nexus 7 ...
tried to manually install kitkat.
i read a how to... erased cache etc etc.
after these steps, i tried to install the image. but it didnt work. i tried to flash the bootloader. didnt work.
after this, i dont know at which step, i lost the usb connection. i cant boot anything. no recovery mode etc.
after switching off my device, it says 'booting failed' ... i only can access to the bootloader at restart it.
using adb devices - no devices found.
who can help me... ?!
sorry for my bad english
Click to expand...
Click to collapse
hmm that sounds bad dude, first don't try stuff you aren't sure of !
Second, you are lucky that you can access boot loader; most nexus become paper weight
here are steps to get it back to life.
1 ) download nexus root toolkit 1.80
2 ) select your device and ROM what was running on.
3 ) there are icon buttons first install drivers using first button.(Full driver installation guide etc)
4 ) then go to the button that is flash stock+unroot {make sure to check current status(soft bricked) }
5 ) then if you have a stock room saved, select that or choose auto( it will do all the steps it self )
6 ) it will download and install through boot loader mode
have fun

I had that similar problem, like mentioned before me.. Download thenexus toolkit aand either try to flash stock firmware or you might have to download the original firmware (which is easy to which) and then side load or manually push the image to your tablet
---------- Post added at 02:37 PM ---------- Previous post was at 02:34 PM ----------
Anonymous777 said:
I had that similar problem, like mentioned before me.. Download thenexus toolkit aand either try to flash stock firmware or you might have to download the original firmware (which is easy to which) and then side load or manually push the image to your tablet
Click to expand...
Click to collapse
Sorry, that was the poorest grammar ever!

[Q] How to unbrick galaxy grand prime without enabling usb debug?

Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.

rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom

rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.

you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link

AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.

me 2
Me 2, I want to unbrick it how to download my firmware?

Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.

maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.

I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?

dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there

talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!

lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk

talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!

lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk

talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.

If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115

Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode

mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?

waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone

mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes

[Guide][Safe]How To install Custom Recovery in HuaweiHonor Holly 3C Lite Without Root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Things You Need :
A Brain
SP Flash Tool ---Click Here To Download|Mirror
MT65xx Preloader Driver [Installed]--Click Here To See How To install
MT6582_Android_scatter --- Click Here To Download|Mirror
Custom Recover IMG File --- CWM Reocovery|TWRP Recovery|Philz Recovery
Procedure:
Open SP Flash Tool Click on Download Tab and Then Scatter-Loading
A Window Will Appear Then Browse To MT6582_Android_scatter.txt Which You Downloaded From Above
And Double Click on It
Now Check Recovery and Make Sure All Other all Unchecked
Then Click Under Location in-front Of Recovery Then Browse To Your Custom Recovery And Select it
Now Turn Off Your Phone And Click on Download Button After Pressing Download Button Connect Your Phone With Cable To The Computer Without Turning it ON
Now Wait For The SP Flash Tool To Complete Flashing
If You Done Everything Right Then You Should Now See a Green Circle
Click On OK
and Now You Can Go To Your Custom Recovery
Thats it
You Can Join Me at Facebook
Facebook Page
Facebook Group
My Timeline ​

Hello

what if the device is bricked ?

best way to install custom recovery on HHH

DarkEstra said:
what if the device is bricked ?
Click to expand...
Click to collapse
This is Safe Method
​

Hello sir.. I hav already tried using flashify both twrp.zip and cwm.img.. Now is it safe/right to follow this method? Will it brick my device?
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
And i dont know how to 'thank' in xda so here i am thanking you alll sir for ur help.. Thanks a lot

no progress shown at bottom of sp .. no green mark .. i have downloaded all of em and used sp flash tool..

waqas1412 said:
This is Safe Method
​
Click to expand...
Click to collapse
Hello sir.. Good evening. Sir am in a trouble that only u can help me to solve it.. Pls spend a few of ur valuable mins to read this.... Sir i followed every word in the rooting guide.. I installed adb installer first.. Handset win driver next and driver auto installer at last.. Then when i installed iroot it said me to download the latest.. I did it too.. I installed.. Then it was connecting to my phone.. I kept it in usb storage mode. Then i clicked root.. It was rooting.. My computer had active internet connection.. Not my phone.. So the i root installed few apps in my mobile as said in the guide.. Then the ph rebooted and in my system.. Root successful appeared.. I was not sarisfied.. Installed root checker.. Then it confirmed that my device is properly rooted.. Then i downloadef root deleter app i think.. Which i used to uninstall the chinese apps.. And one cleaner rom master etc.. Atlast i was left with kingroot and not any chinese app.. Okay? Nw i wanted to install super su.. It asked for binary update.. I clicked normal as i had no custom recovery.. It failed.. So i browsed in xda.. I had to flash a custom recovery to flash super su .zip so i had nw two methods.. One is using flashify and another is using sp flash tool.. Now pls note.. This s wat i did exactly.....
I downloaded flashify.. Downloaded twrp.zip from xda and cwm.img from same xda guide.. Then i opend flashify.. Clicked on zip something which was the third option selected twrp.zip then clicked twrp/philz then yup. It completed quickly then asjed for reboot or flash more.. I clicked reboot and it went to stock recovery only.. Then i came again to flashify... Clicked the second option with image in it.. Then i chose cwm.img. it flashed for a long time then said flash completed.. Flash more or reboot.. Again i clicked reboot.. Now the problem begins.. It vibrated.. Came to honor logo.. Faded away.. Vibrated again honor logo.. The normal boot.. Tried flashing again.. Same problem.. I asked it in xda.. Told me to follow sp flas tool.. (Note:- i trued flashing cwm.img using rashr too.. Same response) then today i downloaded mt65xx preloder.zip , sp flash tool.zip , some scatter txt given in the thread then cwm.img. i connected my ph without battery.. Comp did not detect my ph.. And also could not find mt65xx preloder in the other devices.. Tried removing mc as well as sim cards.. Then too no response.. Tried pressing vol+ then it detected but disappeared again... Then tried with my battery on. It detected but kept on disappearing.. So once it appeared i quickely clicked and followed the procedure and installed the driver.. It said it was successful.. Then opened flas tool.exe and clicked download.. Selected cwm.img.. (My ph was connected with battery.. Sim cards and mc taken off..) Then i switched on my ph.. Removed cable.. Switched off.. Clicked download.. Connected it again.. It showed yellow color progress then complete.. Green circle.. Now comes the hard part.. I trued to enter recovery using vol+ vol- power button... But the same thing happened.. Honor logo.. Vibrate.. Fade away.. Again vibrate honor logo.. Normal boot.. I was abt to cry then.. Did it again.. Connected my ph without battery. No response.. Held vol+ then it appeared then disappeared.. But wen appeared it showed driver already installed.. Then opened sp flash tool switched on my ph.. Switched it off.. Clicked download and connected.. Same yellow progress and green circle.. But am not at all going to the recovery at allllll!!!!! Did i brick my phone?? Am really upset.. Am doing all this to flash supersu.zip.. But i couldnt get into custom recovery.. Tried it all.... Plsssss help me cuz i do not hav any person who knows abt this in my locality.. Pls sir any one pls help me pls... Am struck.. If possible.. Can i jus wipe everything include my root and start all procees(from rooting) from the beginning?? Will it restore my stock recovery??? Pls helpp me every one... Plss..

naveen cjj said:
Hello sir.. Good evening. Sir am in a trouble that only u can help me to solve it.. Pls spend a few of ur valuable mins to read this.... Sir i followed every word in the rooting guide.. I installed adb installer first.. Handset win driver next and driver auto installer at last.. Then when i installed iroot it said me to download the latest.. I did it too.. I installed.. Then it was connecting to my phone.. I kept it in usb storage mode. Then i clicked root.. It was rooting.. My computer had active internet connection.. Not my phone.. So the i root installed few apps in my mobile as said in the guide.. Then the ph rebooted and in my system.. Root successful appeared.. I was not sarisfied.. Installed root checker.. Then it confirmed that my device is properly rooted.. Then i downloadef root deleter app i think.. Which i used to uninstall the chinese apps.. And one cleaner rom master etc.. Atlast i was left with kingroot and not any chinese app.. Okay? Nw i wanted to install super su.. It asked for binary update.. I clicked normal as i had no custom recovery.. It failed.. So i browsed in xda.. I had to flash a custom recovery to flash super su .zip so i had nw two methods.. One is using flashify and another is using sp flash tool.. Now pls note.. This s wat i did exactly.....
I downloaded flashify.. Downloaded twrp.zip from xda and cwm.img from same xda guide.. Then i opend flashify.. Clicked on zip something which was the third option selected twrp.zip then clicked twrp/philz then yup. It completed quickly then asjed for reboot or flash more.. I clicked reboot and it went to stock recovery only.. Then i came again to flashify... Clicked the second option with image in it.. Then i chose cwm.img. it flashed for a long time then said flash completed.. Flash more or reboot.. Again i clicked reboot.. Now the problem begins.. It vibrated.. Came to honor logo.. Faded away.. Vibrated again honor logo.. The normal boot.. Tried flashing again.. Same problem.. I asked it in xda.. Told me to follow sp flas tool.. (Note:- i trued flashing cwm.img using rashr too.. Same response) then today i downloaded mt65xx preloder.zip , sp flash tool.zip , some scatter txt given in the thread then cwm.img. i connected my ph without battery.. Comp did not detect my ph.. And also could not find mt65xx preloder in the other devices.. Tried removing mc as well as sim cards.. Then too no response.. Tried pressing vol+ then it detected but disappeared again... Then tried with my battery on. It detected but kept on disappearing.. So once it appeared i quickely clicked and followed the procedure and installed the driver.. It said it was successful.. Then opened flas tool.exe and clicked download.. Selected cwm.img.. (My ph was connected with battery.. Sim cards and mc taken off..) Then i switched on my ph.. Removed cable.. Switched off.. Clicked download.. Connected it again.. It showed yellow color progress then complete.. Green circle.. Now comes the hard part.. I trued to enter recovery using vol+ vol- power button... But the same thing happened.. Honor logo.. Vibrate.. Fade away.. Again vibrate honor logo.. Normal boot.. I was abt to cry then.. Did it again.. Connected my ph without battery. No response.. Held vol+ then it appeared then disappeared.. But wen appeared it showed driver already installed.. Then opened sp flash tool switched on my ph.. Switched it off.. Clicked download and connected.. Same yellow progress and green circle.. But am not at all going to the recovery at allllll!!!!! Did i brick my phone?? Am really upset.. Am doing all this to flash supersu.zip.. But i couldnt get into custom recovery.. Tried it all.... Plsssss help me cuz i do not hav any person who knows abt this in my locality.. Pls sir any one pls help me pls... Am struck.. If possible.. Can i jus wipe everything include my root and start all procees(from rooting) from the beginning?? Will it restore my stock recovery??? Pls helpp me every one... Plss..
Click to expand...
Click to collapse
Where did you buy your phone from? And, Have you followed guides?
Edit: Eventually, you can follow this guide and use 2nd method (using SPFlashTools).

kernel.killer said:
Where did you buy your phone from? And, Have you followed guides?
Edit: Eventually, you can follow this guide and use 2nd method (using SPFlashTools).
Click to expand...
Click to collapse
From flipkart. Yes. Read my post completely.. I followed guides comletely sir.
---------- Post added at 03:18 PM ---------- Previous post was at 03:17 PM ----------
naveen cjj said:
From flipkart. Yes. Read my post completely.. I followed guides comletely sir.
Click to expand...
Click to collapse
Do i have to unlock bootloader?
---------- Post added at 03:28 PM ---------- Previous post was at 03:18 PM ----------
When i remove battery and connect my ph to a computer it does not recognise it sir... Only wen i press vol+ button it recognises but vanishes within seconds even i hold the button longer.. And am unable to download file from sp flash tool without battery on my ph.. Only with battery it gets done. Even in the guide it says "turn off ur ph and click on download" wen could i possibly turn it off except wen it s turned on? So in order for it to b turned on it must hav a battery.. Right? Oh my am really confused.. If i get custom recovery.. Am done sir.. I will flash supersu.zip and feel satisfied.. Am doing all this fir this thing nly.. Is there any way that i could start allll the process frm the scratch? Can i bring my ph to its original state the way i bought and begin things from start? Cuz i think i messed up sir. Bringing my ph to its original state means without root but with stock recovery.. Pls help me.. Am afraid i wont get a solution at all.. My only hope s XDA

naveen cjj said:
From flipkart. Yes. Read my post completely.. I followed guides comletely sir.
Click to expand...
Click to collapse
I'm sorry I meant country, so I found on Google that it is India.
naveen cjj said:
---------- Post added at 03:18 PM ---------- Previous post was at 03:17 PM ----------
Do i have to unlock bootloader?
Click to expand...
Click to collapse
Yes you should unlock bootloader.
naveen cjj said:
---------- Post added at 03:28 PM ---------- Previous post was at 03:18 PM ----------
When i remove battery and connect my ph to a computer it does not recognise it sir... Only wen i press vol+ button it recognises but vanishes within seconds even i hold the button longer.. And am unable to download file from sp flash tool without battery on my ph.. Only with battery it gets done. Even in the guide it says "turn off ur ph and click on download" wen could i possibly turn it off except wen it s turned on? So in order for it to b turned on it must hav a battery.. Right? Oh my am really confused.. If i get custom recovery.. Am done sir.. I will flash supersu.zip and feel satisfied.. Am doing all this fir this thing nly.. Is there any way that i could start allll the process frm the scratch? Can i bring my ph to its original state the way i bought and begin things from start? Cuz i think i messed up sir. Bringing my ph to its original state means without root but with stock recovery.. Pls help me.. Am afraid i wont get a solution at all.. My only hope s XDA
Click to expand...
Click to collapse
Have you successfully flashed something? (Ended with green circle) If no your phone should be in it's 'original' state. If yes download here B110 or B115 ROM and there should be in zip extracted version of ROM for SPFlashTool too, so flash that, if it isn't there follow guides "Part #1 - Converting Huawei UPDATE.APP to SP FlashTool Flashable Files" and "Part #2 - Flashing ROM using Files Exported From UPDATE.APP" here. Or... you can restore your phone from backup taken using SP Flash Tool as I recommended you before.

Yes it showed green circle yet i can get into recovery.. So if i flash that rom my ph will come to its original state right? With stick recovery? So b4 tat i hav to unlock my bootloader right? Jus now Googled on how to do it.. All i need now is a guidance.. Cuz am new to this stuff.. Xtremely new. Pls sir help me do things step by step.. Thanking you sir..
---------- Post added at 06:32 PM ---------- Previous post was at 06:32 PM ----------
What if i unlock my bootloader and try flashing cwm.img using sp flash tool?
---------- Post added at 06:45 PM ---------- Previous post was at 06:32 PM ----------
Sir am confused.. Pls read my post and teach me where i hav gone wrong or what i hav missed to do... And wat i hav to do further to get CUSTOM RECOVERY???
---------- Post added at 06:56 PM ---------- Previous post was at 06:45 PM ----------
Sir pls dont think tht am bugging u.. Ur link says.. Lik h30 - u10 but mine is u19!

Mine s B105

Aftr flashing stock ROM can i hav stock recovery back?? Thn can i root my phone and try flashing the recovery using spft?? So b4 flashing stock ROM what are the things to be done prior to it..

naveen cjj said:
Aftr flashing stock ROM can i hav stock recovery back?? Thn can i root my phone and try flashing the recovery using spft?? So b4 flashing stock ROM what are the things to be done prior to it..
Click to expand...
Click to collapse
Sorry I Didn't Get Your Point​

I have flashed everything!
I get an green circle in SP Tool, but i cant enter the recovery with Volume up + Power..
What the hell is that?

Italia99 said:
I have flashed everything!
I get an green circle in SP Tool, but i cant enter the recovery with Volume up + Power..
What the hell is that?
Click to expand...
Click to collapse
which recovery you flashed

dinokhan said:
which recovery you flashed
Click to expand...
Click to collapse
cmw

chamara1 said:
cmw
Click to expand...
Click to collapse
He means CWM... I guess...

recovery lost
hi my friend
thanks for good post
i have a big problem with recovery
first time i used flashify for instal custom recovery twrp on u19 ,it was look like installed succefully but recovery not load on boot
second time i used sp flash tools but recovery not load again...
please help
firmwore c328b106