Database Users

[Q] nexus 7 bricked - booting failed - only bootloader works - no USB connection

hi guys.
i bricked my nexus 7 ...
tried to manually install kitkat.
i read a how to... erased cache etc etc.
after these steps, i tried to install the image. but it didnt work. i tried to flash the bootloader. didnt work.
after this, i dont know at which step, i lost the usb connection. i cant boot anything. no recovery mode etc.
after switching off my device, it says 'booting failed' ... i only can access to the bootloader at restart it.
using adb devices - no devices found.
who can help me... ?!
sorry for my bad english

come on guys need help

eight.zero said:
hi guys.
i bricked my nexus 7 ...
tried to manually install kitkat.
i read a how to... erased cache etc etc.
after these steps, i tried to install the image. but it didnt work. i tried to flash the bootloader. didnt work.
after this, i dont know at which step, i lost the usb connection. i cant boot anything. no recovery mode etc.
after switching off my device, it says 'booting failed' ... i only can access to the bootloader at restart it.
using adb devices - no devices found.
who can help me... ?!
sorry for my bad english
Click to expand...
Click to collapse
hmm that sounds bad dude, first don't try stuff you aren't sure of !
Second, you are lucky that you can access boot loader; most nexus become paper weight
here are steps to get it back to life.
1 ) download nexus root toolkit 1.80
2 ) select your device and ROM what was running on.
3 ) there are icon buttons first install drivers using first button.(Full driver installation guide etc)
4 ) then go to the button that is flash stock+unroot {make sure to check current status(soft bricked) }
5 ) then if you have a stock room saved, select that or choose auto( it will do all the steps it self )
6 ) it will download and install through boot loader mode
have fun

I had that similar problem, like mentioned before me.. Download thenexus toolkit aand either try to flash stock firmware or you might have to download the original firmware (which is easy to which) and then side load or manually push the image to your tablet
---------- Post added at 02:37 PM ---------- Previous post was at 02:34 PM ----------
Anonymous777 said:
I had that similar problem, like mentioned before me.. Download thenexus toolkit aand either try to flash stock firmware or you might have to download the original firmware (which is easy to which) and then side load or manually push the image to your tablet
Click to expand...
Click to collapse
Sorry, that was the poorest grammar ever!

Problem while flashing GingerIceJelly v2.0.RC2

hello
i just followed the installation guide step by step of GingerIceJelly v2.0.RC2 ... after reboot the phone stick on samsung logo
as cited, i tried to edite a file , but after packing everything , i tried to boot my phone into recovry mode, the phone keep in the samsung logo, hours and hours, nothing happens
I really need help, i don't have any other devise , i-... i just cannot ...

Fh
---------- Post added at 04:36 AM ---------- Previous post was at 04:26 AM ----------
Your phone is bricked it happened to mine also.. use odin and flash the original STOCK rom.. that can solve the problem.
DEVICE
Samsung Galaxy S5360
Rom:Cyanogenmod 7.2
kernel[email protected]
Hit thanks if i helped you.

SDR_Muslim_Mo said:
hello
i just followed the installation guide step by step of GingerIceJelly v2.0.RC2 ... after reboot the phone stick on samsung logo
as cited, i tried to edite a file , but after packing everything , i tried to boot my phone into recovry mode, the phone keep in the samsung logo, hours and hours, nothing happens
I really need help, i don't have any other devise , i-... i just cannot ...
Click to expand...
Click to collapse
Here=)) http://forum.xda-developers.com/showthread.php?t=2568853
Everything given here.... . Download the firmware of your country and flash from given steps over there.. .. .
If any problem.. ask then.. :laugh:l

Hard bricked Galaxy grand 2 sm-g7102

I was trying to flash my grand 2 with flash tool and it formatted the phone but with a problem. Now the phone no longer boot. No soft key works. It's just dead. Is it possible to use flash tool to fix the phone? When I connect it to the computer it sees it because I have mtkpreloader driver installed. Apparently that's the only software recognizing the phone. I can't use odin because it won't boot into recovery. How can I lay hands on the phone's dump files? The dump is suppose to have android scatter file in it along with img files such preloader, mbr, uboot, bootimg, recovery, android, etc. If you have a link to this file please upload it. Or if there's a better method please I'd like to know. Keep in mind that JTAG isn't an option for me.
Sent from my Lenovo P70-A using XDA Free mobile app

any updates ???
i have the same prob

Can u get into download mode?

Try to hold and press vloume down+home+power key wait for some moments then realised the buttom and press volume up the connect to your pc see wether odin is detect your mobile if not be sure samsung driver are installed
If above methode not work the use jtag search on google
And last one but my favorite method
Use sdc img for debrick
http://galaxymediaone.blogspot.in/2014/10/samsung-galaxy-grand-2-dead-boot_31.html
Note
you can install any framware
Samsung galaxy grand 2 drivers
http://androidxda.com/download-samsung-usb-drivers

G.NO_BOYz said:
Can u get into download mode?
Click to expand...
Click to collapse
NO
---------- Post added at 11:25 PM ---------- Previous post was at 11:11 PM ----------
android_smater said:
Try to hold and press vloume down+home+power key wait for some moments then realised the buttom and press volume up the connect to your pc see wether odin is detect your mobile if not be sure samsung driver are installed
If above methode not work the use jtag search on google
And last one but my favorite method
Use sdc img for debrick
http://galaxymediaone.blogspot.in/2014/10/samsung-galaxy-grand-2-dead-boot_31.html
Note
you can install any framware
Samsung galaxy grand 2 drivers
http://androidxda.com/download-samsung-usb-drivers
Click to expand...
Click to collapse
can i then directly install cm12

kai.verma said:
NO
---------- Post added at 11:25 PM ---------- Previous post was at 11:11 PM ----------
can i then directly install cm12
Click to expand...
Click to collapse
No dude it will help you to debrick the phone and help you to install stock framware
After install simply install any custom recovery then you can install any custom rom

android_smater said:
No dude it will help you to debrick the phone and help you to install stock framware
After install simply install any custom recovery then you can install any custom rom
Click to expand...
Click to collapse
ok man hope for the best downloaded that fine now getting ATF v11.70
is there any video tut of it as im new to this

android_smater said:
No dude it will help you to debrick the phone and help you to install stock framware
After install simply install any custom recovery then you can install any custom rom
Click to expand...
Click to collapse
all its saying is No ATF Box Found

https://m.youtube.com/watch?v=1KiNuBNRb7w
Try this video tuto...
And if not found atf file then goto to this thread you will found the atf file in a post i forget which post is that
http://forum.xda-developers.com/gal...te-debrick-image-hard-brick-sm-g7102-t2819822
Here is atf file
http://www.4shared.com/download/uSZXFbumba/SM-G7102_442_8GB_G7102XXUBNH6.sdc?lgfp=3000

android_smater said:
https://m.youtube.com/watch?v=1KiNuBNRb7w
Try this video tuto...
And if not found atf file then goto to this thread you will found the atf file in a post i forget which post is that
http://forum.xda-developers.com/gal...te-debrick-image-hard-brick-sm-g7102-t2819822
Here is atf file
http://www.4shared.com/download/uSZXFbumba/SM-G7102_442_8GB_G7102XXUBNH6.sdc?lgfp=3000
Click to expand...
Click to collapse
but i dont have atf box
anyother way around it ?

My Samsung Galaxy grand 2 7102 is not going in download mode by SDC

Redmi note 3g hard brick fix

i accidentally use the format all+download option in sp tools and flashed the bootloader. now whenever i try to do anything it gives me this error. pls help
-phone will not boot
-no charging led when plugged in
-phone is detected when i plug into pc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mysi said:
i accidentally use the format all+download option in sp tools and flashed the bootloader. now whenever i try to do anything it gives me this error. pls help
-phone will not boot
-no charging led when plugged in
-phone is detected when i plug into pc
View attachment 3551440
Click to expand...
Click to collapse
same as you. can anyone help?

scott4 said:
same as you. can anyone help?
Click to expand...
Click to collapse
just download a new recovery rom (the miui 7 ones) and flash it through spflash tools it worked for me:good:

mysi said:
just download a new recovery rom (the miui 7 ones) and flash it through spflash tools it worked for me:good:
Click to expand...
Click to collapse
can you give me the link to download that recovery rom? Thanks!
did you download the rom from below URL?
http://en.miui.com/thread-53193-1-1.html
What steps did you do in order to save your hard brick phone? Thanks!

scott4 said:
can you give me the link to download that recovery rom? Thanks!
did you download the rom from below URL?
What steps did you do in order to save your hard brick phone? Thanks!
Click to expand...
Click to collapse
terribly sorry to keep you waiting, but yes it is the miui 7 one in the link

mysi said:
terribly sorry to keep you waiting, but yes it is the miui 7 one in the link
Click to expand...
Click to collapse
Thanks for your reply. What steps did you do in order to save your phone? I want to follow step by step.

scott4 said:
Thanks for your reply. What steps did you do in order to save your phone? I want to follow step by step.
Click to expand...
Click to collapse
just follow the step exactly on this thread
http://en.miui.com/thread-64425-1-1.html
and make sure to use the miui 7 fastboot rom

Big Thanks..
mysi said:
just download a new recovery rom (the miui 7 ones) and flash it through spflash tools it worked for me:good:
Click to expand...
Click to collapse
Thanks bro, It works.. My phone was live again

hiii
i need ur help. My Redmi note 3g (Mediatek - Global rom) was stuck up at logo. When i tried flashing it using SP flash tool , i got error that "pmt changed for the rom it must be downloaded". Then i have seen some youtube videos and read forums . As per their instruction i have first forrmated using "Auto Format flash" and then did "Format all+ Download" . Now my phone is not starting.
No fastboot, no charging , No recoery mode. Only i am able to run same process again.
I am average user so dont know much about such process.. Can you guys plz help me what to do?

Hi
jalsa_100 said:
i need ur help. My Redmi note 3g (Mediatek - Global rom) was stuck up at logo. When i tried flashing it using SP flash tool , i got error that "pmt changed for the rom it must be downloaded". Then i have seen some youtube videos and read forums . As per their instruction i have first forrmated using "Auto Format flash" and then did "Format all+ Download" . Now my phone is not starting.
No fastboot, no charging , No recoery mode. Only i am able to run same process again.
I am average user so dont know much about such process.. Can you guys plz help me what to do?
Click to expand...
Click to collapse
Jalsa...i have the same problem as you. Was using the phone when all of a sudden the system files started crashing one by one. Showing "unfortunately android.xxxxx.xxx has stopped working....bla...bla...bla". Tried to reboot but stuck at mi logo. tried again, screen went blank, no mi logo. tried doing flash with download only option, successful but still phone blank upon boot up. tried format and download and phone totally dead. no charging nothing. Tried to flash again and each time successful but still cant turn phone on and no charging led. Hope someone can reply with a solution.

bump.. still no solution for this>?my phone bootloop because of many apps do not responding .. i try flash using sp flash tools and success but still cant get into system. it just stuck at MI logo .. and recovery mode also not changed after flash using sp flash tool. still twrp .. cache, data, system also cant mount if want flash rom using twrp .. it say no os installed if u want to reboot ur device via twrp. if anyone have solution plese share it. thanks

viviminmin said:
bump.. still no solution for this>?my phone bootloop because of many apps do not responding .. i try flash using sp flash tools and success but still cant get into system. it just stuck at MI logo .. and recovery mode also not changed after flash using sp flash tool. still twrp .. cache, data, system also cant mount if want flash rom using twrp .. it say no os installed if u want to reboot ur device via twrp. if anyone have solution plese share it. thanks
Click to expand...
Click to collapse
is there any solution for this ??? i got this problem as well

pengentau said:
is there any solution for this ??? i got this problem as well
Click to expand...
Click to collapse
searched almost 100 threads and even MI has no solution for it i guess coz once you format and download redmi note 3g through SP Flash phone is dead...Its realy strange MI is least interested in solving this bug and its approach is quite visible that they are only interested in launching new handsets and flash sales...Redmi note 3g is history so its users dont deserve any support...this is what am feeling for now

its a Xiaomi's game plan
ok, so did anyone get any results ??? i dont think so as the same happened with lakhs of people say around 1,78,000 people, even i tried everything from drivers to SP Flash Tools, to Fastboot ROM, and yes it did gave that green tick mark as well, but when you boot you are struck at Mi Logo everytime, its basically a bug generated and distributed by Mi itself through its updates to get rid of old phones and to compel buyers to buy a news phone, i am still researching on this matter and if its true then i will sue xiaomi in the court of law for damages and rectification, further if its true i will seek ban from the government on xiaomi from doing business in india

Nitin1976 said:
ok, so did anyone get any results ??? i dont think so as the same happened with lakhs of people say around 1,78,000 people, even i tried everything from drivers to SP Flash Tools, to Fastboot ROM, and yes it did gave that green tick mark as well, but when you boot you are struck at Mi Logo everytime, its basically a bug generated and distributed by Mi itself through its updates to get rid of old phones and to compel buyers to buy a news phone, i am still researching on this matter and if its true then i will sue xiaomi in the court of law for damages and rectification, further if its true i will seek ban from the government on xiaomi from doing business in india
Click to expand...
Click to collapse
My dad's phone (Redmi Note 3G) stuck in bootloop after a call and suddenly rebooted itself, and this happened few days ago..
At first I tried flashing ROM in TWRP recovery, no luck to get the ROM flashed in due to "unable to mount /data", and same to system and cache.
And then I tried using SP Flash tool to flash the ROM to the device, the flashing process was successful, but the phone still stuck in bootloop (stuck at Mi logo). Still no luck..
And I accidentally selected Format All + Download during few times attempts, now the phone ends up dead, I can't boot it up. No more Mi logo, charging LED doesn't turn on. It's dead.

mysi said:
i accidentally use the format all+download option in sp tools and flashed the bootloader. now whenever i try to do anything it gives me this error. pls help
-phone will not boot
-no charging led when plugged in
-phone is detected when i plug into pc
View attachment 3551440
Click to expand...
Click to collapse
You can download stock rom in a .tar format from the xda forum. Use SP tools to flash the same on your phone.
That should solve the issue. I did it for my phone. it works

Will this work for bricked Redmi Note 3G GSM Indian version,with below symptoms ?
-phone will not boot
-no charging led when plugged in
-phone is detected when i plug into pc

Hi Friends,
Trying to flash Redmi Note 3G (India) with SP Flash Tools and Global Rom V7.5.2.0 KHDMIDE (MIUI 7.5) but getting this error .
BROM ERROR : S_DA_NAND_BAD_BLOCK (0xBE5)
[HINT]:
Please suggest for the same.
Thank You........!!!!
---------- Post added at 01:30 PM ---------- Previous post was at 01:05 PM ----------
brom error : S_da_nand_bad_block (0xbe5)
[hint said:
:
Click to expand...
Click to collapse
after changing the usb cable brom error is solve and a big green tick will appear when flashing is finish.
Then reboot the phone but screen is still blank no power on ........... ??
Please suggest and help ...............!!!!
Thank you.

vishulove said:
Hi Friends,
Trying to flash Redmi Note 3G (India) with SP Flash Tools and Global Rom V7.5.2.0 KHDMIDE (MIUI 7.5) but getting this error .
BROM ERROR : S_DA_NAND_BAD_BLOCK (0xBE5)
[HINT]:
Please suggest for the same.
Thank You........!!!!
---------- Post added at 01:30 PM ---------- Previous post was at 01:05 PM ----------
after changing the usb cable brom error is solve and a big green tick will appear when flashing is finish.
Then reboot the phone but screen is still blank no power on ........... ??
Please suggest and help ...............!!!!
Thank you.
Click to expand...
Click to collapse
same here bro...

mysi said:
just follow the step exactly on this thread
http://en.miui.com/thread-64425-1-1.html
and make sure to use the miui 7 fastboot rom
Click to expand...
Click to collapse
not working for me

ZUK Z1 Hard Bricked!!!

please help me unbricking my device currently i am unable to boot into edl, fastboot or recovery. The phone keeps on vibrating and no display.
What i did wrong was that I tried flashing a custom boot logo as said in a thread and flashed splash.img and it resulted in this.
Please help me!!!

Akshatpunj said:
please help me unbricking my device currently i am unable to boot into edl, fastboot or recovery. The phone keeps on vibrating and no display.
What i did wrong was that I tried flashing a custom boot logo as said in a thread and flashed splash.img and it resulted in this.
Please help me!!!
Click to expand...
Click to collapse
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
links :
drivers: https://mega.nz/#!FJRH2b6B!QlS9-7ppEiP9Nw_htWSMtYQWOk9KDxDxImtJZ66usaw
QPST: https://mega.nz/#!dcAQgSZT!C5JhNLnsOru6y_cX52yGzMkgfnriBY0am7nW45Bzsm0
rom: https://mega.nz/#!dFpn3BYb!Eq2i2ldpA8UJnlkjijCh4fM7EdLSaleWBRmW5rJNI84

ADDICTED777 said:
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
links :
drivers: https://mega.nz/#!FJRH2b6B!QlS9-7ppEiP9Nw_htWSMtYQWOk9KDxDxImtJZ66usaw
QPST: https://mega.nz/#!dcAQgSZT!C5JhNLnsOru6y_cX52yGzMkgfnriBY0am7nW45Bzsm0
rom: https://mega.nz/#!dFpn3BYb!Eq2i2ldpA8UJnlkjijCh4fM7EdLSaleWBRmW5rJNI84
Click to expand...
Click to collapse
Thank you sooooooo muchh!!! I almost tried everything and lost hope! This method worked like a miracle, i wish i could hit the thanks button a 1000 times! Thanks again!

Akshatpunj said:
Thank you sooooooo muchh!!! I almost tried everything and lost hope! This method worked like a miracle, i wish i could hit the thanks button a 1000 times! Thanks again!
Click to expand...
Click to collapse
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..

ADDICTED777 said:
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
Click to expand...
Click to collapse
Sure, thanks for the advice.
Btw were you able to change the splash.img/boot logo?

This state isn't named as it is hard bricked ...if it was it won't even vibrate at all...that's we call it as a hard bricked device... it was soft bricked .... in a BOOOOOOOTLOOOOOOOOOOP...
There r various type of bootloops
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
Akshatpunj said:
Sure, thanks for the advice.
Btw were you able to change the splash.img/boot logo?
Click to expand...
Click to collapse
Oh yeah two times...listen here the main thing for the devices is to choose the r8 image...should be less then 200kb & as much as less color... make sure to do it with 16bit(or less) for PNG

ADDICTED777 said:
This state isn't named as it is hard bricked ...if it was it won't even vibrate at all...that's we call it as a hard bricked device... it was soft bricked .... in a BOOOOOOOTLOOOOOOOOOOP...
There r various type of bootloops
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
Oh yeah two times...listen here the main thing for the devices is to choose the r8 image...should be less then 200kb & as much as less color... make sure to do it with 16bit(or less) for PNG
Click to expand...
Click to collapse
Oh ok! I thought i hard bricked my device but luckily you helped me
Okay i will try to change boot logo tomorrow again. Thanks a lot!

Akshatpunj said:
Oh ok! I thought i hard bricked my device but luckily you helped me
Okay i will try to change boot logo tomorrow again. Thanks a lot!
Click to expand...
Click to collapse
Yo there is a button for that ...u know I'm kind of GREEDY...

ADDICTED777 said:
Yo there is a button for that ...u know I'm kind of GREEDY...
Click to expand...
Click to collapse
Already done...

ADDICTED777 said:
Always remember mate...
Computers & smartphones are such a thing u can't damage them until and unless u broke them... so do whatever u wanna try ... test them out... so be productive n believe in urself that u can..
Click to expand...
Click to collapse
I have the same problem. I went to flash a boot image and I messed up. QFIL does not detect my phone maybe beacuse Qualcomm drivers are not getting installed using the INF file.
I have shut the vibrations using the power button step. But as soon as I plug it in with volume up held down, it starts all over again.
---------- Post added at 12:26 PM ---------- Previous post was at 11:43 AM ----------
I have disabled the driver signature verification while rebooting using F8 key.
However, I still get the same error message while installing the INF file that The INF file you selected does not support this method of installation.
---------- Post added at 12:36 PM ---------- Previous post was at 12:26 PM ----------
Please help!!!!

Sahaj Desai said:
I have the same problem. I went to flash a boot image and I messed up. QFIL does not detect my phone maybe beacuse Qualcomm drivers are not getting installed using the INF file.
I have shut the vibrations using the power button step. But as soon as I plug it in with volume up held down, it starts all over again.
---------- Post added at 12:26 PM ---------- Previous post was at 11:43 AM ----------
I have disabled the driver signature verification while rebooting using F8 key.
However, I still get the same error message while installing the INF file that The INF file you selected does not support this method of installation.
---------- Post added at 12:36 PM ---------- Previous post was at 12:26 PM ----------
Please help!!!!
Click to expand...
Click to collapse
u need a video tutorial that shows how to install .inf file
here is the one:
https://www.youtube.com/watch?v=lJ7WTRW7psA
Now before u proceed make sure u have disabled the driver signature verification.

ADDICTED777 said:
u need a video tutorial that shows how to install .inf file
here is the one:
Now before u proceed make sure u have disabled the driver signature verification.
Click to expand...
Click to collapse
I did it using Qualcomm drivers in .exe format.
Now the phone is working fine.

Sahaj Desai said:
I did it using Qualcomm drivers in .exe format.
Now the phone is working fine.
Click to expand...
Click to collapse
:good::good::good:

Hei!!! You are the best. I followed your instructions and it seems it works 100%. You saved my day. I cant thank you enough.

ADDICTED777 said:
ok here what u do:
1. I know the device isn't getting charged, no logo.no recovery,no flash-boot,even won't get detected on windows but,don't panic... first thing is to believe in urself that u can fix that device...
2.. second powering of ur device, so to do that observe the vibrate pattern carefully... very carefully... you'll notice while holding up the power after some vibrations(for me 12) it'll skip one vibration.that's the moment my friend release the power button.
3. so now u have to flash the ROM with QFIL & the cyanogen QFIL file ...
4. now before get into the process make sure u download all the drivers(ZUK drivers & Qualcomm Drivers)
5. installing drivers:
boot ur system into the state that ensures driver signature verification is disabled install zuk drivers if u haven't.
now install Qualcomm Drivers depending upon ur system
6. install Qpst
7. now unzip the ROM.
8. run Qpst as admin
9. select the flat build mode on Qpst and browse the extracted rom folder...u'll get to see the ".mbn " file, select it , load XML
10. now the most important thing press the vol+ button and plug the device (it won't get detected),now after 1sec of pluging it press power button it''ll get detected and press the download button ....
11. wait for the flash....get a cup of coffee..
12. u'll get a messege like download success... u r done mate..
Click to expand...
Click to collapse
hey bro I just accidentally rebooted my zuk z1 in edl mode via all in one tool, but after rebooting in edl mode, screen went off and it didn't boot up again and now pc is not recognizing my device nor does the qfil detects it, its power button does not work so tried it while holding the volume up button but it's not working. I have got qpst file and zuk drivers are also installed. now please someone help me out bro. ;(

Walter Black said:
hey bro I just accidentally rebooted my zuk z1 in edl mode via all in one tool, but after rebooting in edl mode, screen went off and it didn't boot up again and now pc is not recognizing my device nor does the qfil detects it, its power button does not work so tried it while holding the volume up button but it's not working. I have got qpst file and zuk drivers are also installed. now please someone help me out bro. ;(
Click to expand...
Click to collapse
keep it charged overnight... fix the power button...then try the mentioned method...

ZUK Z1 Hard Bricked
Greetings, everyone. I've got a hard bricked zuk z1 which just went into the state all of a sudden.
I was using lineage o.s pie roms, and had faced some Random Reboots also. Not sure what happened, but here's what i did:
Installed zuk drivers
installed qualcomm drivers
installed adb and fastboot(minimal abd and fastboot)
installed qfil, which comes with QPST v2.7.0.460
--------------------------------------------------------------------------------
Downloaded the zuk stock firmware files
pressed vol+ and plugged the usb
Got detected in 9008 mode
QFIL also detected it and chose the correct files and started downloading in FLAT build
mode
now, QFIL shows this error at the end:-
Code:
10:17:52: INFO: Looking for file 'gpt_main0.bin'
10:17:52: INFO: Looking for file 'gpt_backup0.bin'
10:17:52: INFO:
Total to be tansferd with <program> or <read> is 78.85 MB
10:17:52: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
10:18:17: {ERROR: Could not write to '\\.\COM3', Windows API WriteFile failed! Your device is probably *not* on this port, attempted 100 times}
Writing log to 'C:\Users\HARRY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt', might take a minute
Log is 'C:\Users\HARRY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Fail:Process fail
Finish Download
Hope someone can help me . Oh, by the way, the bricking is like "fully-dead" bricking. No vibrations, display, led, nothing.
I feel i haven't done anything wrong in the steps also. SO, How to decode this situation??

i am face same problem "help please expert" my zuk z1 show logo and blew light after 10se not display on screen when touch with pc via usb many partition opening with error how to solve it

Hard partition damaged
helo expert zuk z1 vibrate and show blue light black screen no display after firmware via qfil completed on PC many partition apeared not writeable only show a partition with "image" folder in witch all firmware file stored who write via qfil

naseera422 said:
helo expert zuk z1 vibrate and show blue light black screen no display after firmware via qfil completed on PC many partition apeared not writeable only show a partition with "image" folder in witch all firmware file stored who write via qfil
Click to expand...
Click to collapse
Hello there!. As far as i know, from what you've said,
The phone still vibrates and shows led, which is a good thing.
About the qfil:
Check whether you are using the latest version of QFIL. Many errors did arise while using the earlier ones.
Make sure you haven't messed up any QFIL configuration settings, and check whether the selected build type is "FLAT".
If you are having trouble with the current firmware files, then download another one for the zuk z1, and check if it works. This is because errors can come from wrong/bad programmer files.
::::: This is all assuming that there are no driver issues & that you know well, how to work with QFIL :::::
Hope this helps....