Disclaimer
What's posted here is tested before sharing
but if something bad happens, it's not my problem.Originally posted @MotoModTR by »CanERYVZ« to restore the stock firmware of any XT1033 converted to XT1032 GPE 4.4.2 with deej_roamer's instructions posted here,then OTA'd to GPE 4.4.4. I'm just sharing, all credits to »CanERYVZ« :good:
Your device will be restored to XT1033 Asia.retail 4.4.2 successfully
TESTED and WORKS for XT1033 Asia Retail Dual-Sim version.
1- Download 4.4.2 stock version for your device RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
1a- Extract firmware to c:\retail
2- Download stock OTA 4.4.4 file for XT1033 Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03.zip
2a- Extract just the 3 files "gpt.bin", "logo.bin" and "emmc_appsboot.mbn" to c:\retail and overwrite the old ones.
3- Download mfastboot-adb.rar
3a- Extract mfastboot-adb.rar to c:\retail
4- Open CMD (command prompt) and go to C:\retail (type cd c:\retail in cmd)
Note: you need to run command prompt as administrator.
4a- Type the following commands one by one:
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
5- Go to stock recovery. Wipe data / factory reset and wipe cache for a clean start.
ps : motoboot partition will result error because we don't have it in the moto 4.4.4 ota file, just don't worry and continue. :good:
Greetings. :highfive::good:
So, this will restore the mobile from GPE to Stock 4.4.4 with dual sim capability ?
When does the android s friends
No,
This will restore XT1033 from GPE 4.4.4 to Moto 4.4.2 , but if you like you can OTA to Moto 4.4.4.
When does the android l friends
Awesome, but i have a question.
Some people just take the gpt.bin, replace it to 4.4.2 firmware pakage and flash without flashing motoboot.img.then ok.
Some people take logo.bin too.
But i did not see anyone take the emmc_appsboot.mbn. can u explain what is emmc_appsboot.mbn
Sorry for being noob.
Btw, how many devices did u test?
Sent from my SM-G900F using Tapatalk
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
aboot loads the kernel and ramdisk into memory at the addresses requested by the boot image header, and then signature validation is performed after this loading is complete. Because the boot image header is read straight from eMMC flash prior to any signature validation, it contains essentially untrusted data. As a result, it's possible to flash a maliciously crafted boot image whose header values cause aboot to read the kernel or ramdisk into physical memory directly on top of aboot itself!
Click to expand...
Click to collapse
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
fatihtpr said:
When does the android l friends
Click to expand...
Click to collapse
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Semseddin said:
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Click to expand...
Click to collapse
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
fatihtpr said:
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
Click to expand...
Click to collapse
Xt1032 is one sim version.
Xt1033 is dual sim version
Gửi từ GT-N7105 của tôi bằng cách sử dụng Tapatalk
Thanks windylawyer
Thanks OP...
THANKS!!!
thank youuu good sir! this is total life saver!!
Preflash validation failed
I have got a 1032. Used to have GPE, installed as 4.4.2, OTA upgraded to 4.4.4.
I want to get back the Motorola ROM, 4.4.2, or 4.4.4.
When I tried, I got a few "Preflash validation failed" errors, bootloader complains: "version downgraded for xxx". After the "downgrade" I have got just bootloader and recovery. No sstem can be booted/installed.
I have also tried this script (first few steps), but I have got the same errors for the first 2 commands
Tried with 4.4.2 and 4.4.4 xml.zip versions as well.
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
... and after the whole thing ran, boot process stops in logo (bootloader is open blahblahblah...)
bootloader / recovery can be started, nothing more.
is this method working successfully??
jbanti said:
is this method working successfully??
Click to expand...
Click to collapse
Yes
can i ota after following this procedure to restore to xt1033 firmware?
pfufle said:
can i ota after following this procedure to restore to xt1033 firmware?
Click to expand...
Click to collapse
YES... u can its fully Stock
Sent from my XT1033
Bootloader unlocked flashing and stuck
Semseddin said:
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
Click to expand...
Click to collapse
please somebody help.....after doing all this my screens blink with logo of BOOTLOADER UNLOCKED........and when i go to the fastbootboot and connect usb it now doesnt recognize it........plz help me save my moto g....plzzzzzzzzzzzzzzzz
Related
I am Starting this with a very simple reason that the filefactory link for the Firmware which is the only link currently available right now is a crapy link. The download failed six times before i could finally download it. :highfive:
Downloads:
1.http://goo.gl/5aVzPE [Dev-Host]
2.http://goo.gl/JsWtVE [Mirror]
Pre-Requisite:
1.http://goo.gl/Wl50A3
Instructions 4.4.4:
1. Download 4.4.4 and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder [mfastboot Download: http://goo.gl/lTYq4F]
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
If you do not wish to lock bootloader skip 4.1 and 4.3
4.1
Code:
mfastboot.exe oem lock begin
4.2
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
4.3
Code:
mfastboot.exe oem lock
4.4
Code:
mfastboot.exe reboot
New 4.4.4 Software Update Is Available [Build KXB21.85.23]
Code:
Model number: Moto G (2nd Generation)
Android version: 4.4.4
Baseband version: MSM8626BP_1032.394.88.00R,EMEA_DSDS_CUST
Kernel version: 3.4.42-g668a77b [email protected] #1 Tue Aug 26 20:30:04 CDT 2014
System version: 21.11.23.titan_retaildsds.retaildsdsall.en.03 retin
Build number: KXB21.85-23
Instructions New 4.4.4 Update:
IF you are restoring to complete stock prefer the above method to go 4.4.4 method below is obsolete
1. Download The Firmware Package: http://goo.gl/NoKvOu
2. Copy this file into the root of directory of Internal SD (i.e Internal SD itself, no subfolders)
3. Reboot to Stock Recovery using Holding down VolumeDown+Power button to go to Bootloader, Then VolumeDown=>VolumeUp to recovery
or using ADB
Code:
adb reboot recovery
4. Apply update from SD and choose the downloaded package.
5. TaDa, Stock 4.4.4.
4.4.4 Update Doesn't wipe Internal Memory
And the Phone is as good as new.
Many thanks!!:good:
katobest said:
Many thanks!!:good:
Click to expand...
Click to collapse
Press Thanks Button. :good:
I'm new to motorola phones,
Can we unlock the moto g bootloader without getting the unlock code from motorola? and does that have any effect on warranty?
Is this mfastboot tool from motorola?
littleromeo said:
I'm new to motorola phones,
Can we unlock the moto g bootloader without getting the unlock code from motorola? and does that have any effect on warranty?
Is this mfastboot tool from motorola?
Click to expand...
Click to collapse
Without Unlock code u cant unlock booloader. your warrenty void after unlock.mfastboot tool from devlopers (google)
Failed to Validate System Image
Hi,
I have Moto G 2014 XT1068 model with locked bootloader. I have followed steps in 4.2 section, now the phone is not booting up with error message "Failed to validate system image boot uo failed" Please help revive my moto g 2014.
Thanks
Dhamukanna said:
Hi,
I have Moto G 2014 XT1068 model with locked bootloader. I have followed steps in 4.2 section, now the phone is not booting up with error message "Failed to validate system image boot uo failed" Please help revive my moto g 2014.
Thanks
Click to expand...
Click to collapse
Bro,
Never flash stock Firmware with a locked bootloader. -_-
Solution: Unlock Bootloader and reflash Stock Firmware with same steps.
Unlock Bootloader From Here: http://forum.xda-developers.com/mot...wip-unlock-bootloader-moto-g-2nd-gen-t2875728
SST Lock Failure
archies20 said:
Bro,
Never flash stock Firmware with a locked bootloader. -_-
Solution: Unlock Bootloader and reflash Stock Firmware with same steps.
Unlock Bootloader From Here: http://forum.xda-developers.com/mot...wip-unlock-bootloader-moto-g-2nd-gen-t2875728
Click to expand...
Click to collapse
Thanks Bro.. I unlocked bootloader.. followed steps in 4.2 section.. once I perform 4.4 step, phone reboots with a bootloader unlocked warning message and vibrates and then screen blinks with bootloader unlocked warning message and not booting into system.. Please help Bro
Dhamukanna said:
Thanks Bro.. I unlocked bootloader.. followed steps in 4.2 section.. once I perform 4.4 step, phone reboots with a bootloader unlocked warning message and vibrates and then screen blinks with bootloader unlocked warning message and not booting into system.. Please help Bro
Click to expand...
Click to collapse
I had the same issue. What I did was, in code 4.2, before this line:
"mfastboot.exe flash modem NON-HLOS.bin",
i added
"mfastboot.exe flash system system.img_sparsechunk.3",
as in the archive, there are three sprsechunk files.. Then the device booted up fine. Pls try and do let me know if I am wrong.
Is it necessary to flash all modules if we just want to return to stock recovery and remove root? Can we remove root and lock the bootloader without flashing all modules?
Thank you very much bro.. Issue resolved
deepaklunked said:
I had the same issue. What I did was, in code 4.2, before this line:
"mfastboot.exe flash modem NON-HLOS.bin",
i added
"mfastboot.exe flash system system.img_sparsechunk.3",
as in the archive, there are three sprsechunk files.. Then the device booted up fine. Pls try and do let me know if I am wrong.
Click to expand...
Click to collapse
Thanks bro.. I noticed system.img_sparsechunk.3 in the firmware folder and reflashed it as you have suggested.. worked like a charm now I am able to boot my moto g 2014 into system. Thanks again bro. I am going to post a new thread for properly reflashing stock rom on moto g 2014...
Update Steps else phone won't boot into system
archies20 said:
I am Starting this with a very simple reason that the filefactory link for the Firmware which is the only link currently available right now is a crapy link. The download failed six times before i could finally download it
Downloads:
1.http://goo.gl/5aVzPE [Dev-Host]
2.http://goo.gl/JsWtVE [Mirror]
Pre-Requisite:
1.http://goo.gl/Wl50A3
Instructions 4.4.4:
1. Download 4.4.4and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder [mfastboot Download: http://goo.gl/lTYq4F]
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
If you do not wish to lock bootloader skip 4.1 and 4.3
4.1
Code:
mfastboot.exe oem lock begin
4.2
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
4.3
Code:
mfastboot.exe oem lock
4.4
Code:
mfastboot.exe reboot
And the Phone is as good as new.
Click to expand...
Click to collapse
Please add mfastboot.exe flash system system.img_sparsechunk.3 after mfastboot.exe flash system system.img_sparsechunk.2 (I have XT1068 model). Users need to flash all system files (sparsechunk.0, 1, 2, 3) to reflash stock firmware on Moto G 2014 else phone won't boot into system saying Failed to Validate System Image".
Dhamukanna said:
Please add mfastboot.exe flash system system.img_sparsechunk.3 after mfastboot.exe flash system system.img_sparsechunk.2 (I have XT1068 model). Users need to flash all system files (sparsechunk.0, 1, 2, 3) to reflash stock firmware on Moto G 2014 else phone won't boot into system saying Failed to Validate System Image".
Click to expand...
Click to collapse
Oh my god sorry guys for issue. mfastboot.exe flash system system.img_sparsechunk.3 added thanks.
Help..!!!
I ve messed up with one of the system apk and now want to flash stock firmware. I followed the steps but at first command it says "waiting for device".. It stays forever. pls help
I am not able to relock the bootloader nor able to flash stock rom
i simply followed OP's guide but still
Any help would be appreciated
haytham.kenway said:
I am not able to relock the bootloader nor able to flash stock rom
i simply followed OP's guide but still
Any help would be appreciated
Click to expand...
Click to collapse
And in phone i Get "Failed to Vaildate System Image":crying::crying::crying::crying::crying:
in Phone "Invalid PIV signed image file"
http://imgur.com/xCCr3IZ
Anyone please help me
haytham.kenway said:
Anyone please help me
Click to expand...
Click to collapse
Follow the steps provided below:
1. Install Motorola Device Drivers
2. Get Unlock Code from Motorola Website
3. Download firmware for your phone model
4. Follow the instructions provided in this thread
Dhamukanna said:
Follow the steps provided below:
1. Install Motorola Device Drivers
2. Get Unlock Code from Motorola Website
3. Download firmware for your phone model
4. Follow the instructions provided in this thread
Click to expand...
Click to collapse
Bro i have succesfully flashed the rom but i'm not able to lock the bootloader
it says failed to lock bootloader sst failure
help please
Im not able to flash the rom. Extrcted fastboot and rom in the same folder. shift and fight click, run cmd here. i entered the command but it says ' waiting for device' im rooted , bootloader is unlocked and usb debugging is on
The title should have "update"... Thanks autoincorrect.
Sent from my XT1052 using XDA Free mobile app
Mine's just on the way down.
Just got mine but it won't update. I have no idea why. Maybe it's because I have a custom recovery?
It says it's expected to have a version ie victara and I have cm_victara. Any one know how to get this to update? My phone is currently rebooting constantly unless I turn it off myself.
Custom recovery is why. Look for guides to reflash
kboya said:
Custom recovery is why. Look for guides to reflash
Click to expand...
Click to collapse
I just used multi tool to install the stock recovery and wipe but it still won't work. Any ideas?
Please can someone upload the GB Retail firmware for the XT1092 if they have now got this successfully. Thanks!
Thats interesting, so the EU and GB versions have the same baseband.
Might be alright to stick to the EU firmware for now then, maybe it gets the next update faster
There's nothing on the surface to mark it out as being GB specific.
To be fair, I'm not sure a week's update difference is enough for me to care.
transmission1 said:
Please can someone upload the GB Retail firmware for the XT1092 if they have now got this successfully. Thanks!
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showpost.php?p=57591807&postcount=36
Diesel779 said:
Here you go: http://forum.xda-developers.com/showpost.php?p=57591807&postcount=36
Click to expand...
Click to collapse
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
AllenLoyola23 said:
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
Click to expand...
Click to collapse
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
AllenLoyola23 said:
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
Click to expand...
Click to collapse
Multi-Tool is made for the XT1095, so that's probably why. It even says that in the title.
You can use my guide here, to convert your phone back to XT1092 and get RETEUALL instead.
Lafenear said:
Multi-Tool is made for the XT1095, so that's probably why. It even says that in the title.
You can use my guide here, to convert your phone back to XT1092 and get RETEUALL instead.
Click to expand...
Click to collapse
Diesel779 said:
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
Click to expand...
Click to collapse
Thanks guys. I'm stuck tho. It says I'm missing AdbWinApi.DLL which is a driver right? I've got AndroidSDK tho so I don't why that's popping up.
AllenLoyola23 said:
Thanks guys. I'm stuck tho. It says I'm missing AdbWinApi.DLL which is a driver right? I've got AndroidSDK tho so I don't why that's popping up.
Click to expand...
Click to collapse
I wouldn't bother with the RETEU version if you're in the UK, the link I gave you is to the official RETGB factory image. As regards your problem try putting the msfastboot in your ADB folder and also extract your RETGB zip into the same folder, then open up a terminal in that folder and run the commands. Also, have you put your phone in fastboot and let Window automatically install the fastboot driver for your device?
Edit to add: If you are having problems though the RETEU is the same and you'll still receive official OTA's in the future. Just try what I typed above and if all else fails follow the other posters guide to install rthe RETEU version.
Diesel779 said:
I wouldn't bother with the RETEU version if you're in the UK, the link I gave you is to the official RETGB factory image. As regards your problem try putting the msfastboot in your ADB folder and also extract your RETGB zip into the same folder, then open up a terminal in that folder and run the commands. Also, have you put your phone in fastboot and let Window automatically install the fastboot driver for your device?
Edit to add: If you are having problems though the RETEU is the same and you'll still receive official OTA's in the future. Just try what I typed above and if all else fails follow the other posters guide to install rthe RETEU version.
Click to expand...
Click to collapse
Got it. I actually almost couldn't find my ADB folder. Somehow I didn't have in C: and had it installed in my documents folder. dumb.
But yeah I managed to get it. This means I get all future OTAs right? and Even if I don't I could still use that method to update? And thanks so much guys. Really appreciate it, I thought I was never going to get Lollipop on this.
AllenLoyola23 said:
Got it. I actually almost couldn't find my ADB folder. Somehow I didn't have in C: and had it installed in my documents folder. dumb.
But yeah I managed to get it. This means I get all future OTAs right? and Even if I don't I could still use that method to update? And thanks so much guys. Really appreciate it, I thought I was never going to get Lollipop on this.
Click to expand...
Click to collapse
Yes, you will get all future OTA's. This is an official RETGB retail image. It's exactly what you would have got if you had received the OTA normally, but instead of upgrading you've done a fresh install.
Diesel779 said:
Yes, you will get all future OTA's. This is an official RETGB retail image. It's exactly what you would have got if you had received the OTA normally, but instead of upgrading you've done a fresh install.
Click to expand...
Click to collapse
Is there a way to flash 4.4.4 images again? i went straight to L when i got my phone and didn't get a chance to test it out on kitkat, but it fails to flash the partition or motoboot image as the current version is too high, do you know how to bypass the checks?
IINexusII said:
Is there a way to flash 4.4.4 images again? i went straight to L when i got my phone and didn't get a chance to test it out on kitkat, but it fails to flash the partition or motoboot image as the current version is too high, do you know how to bypass the checks?
Click to expand...
Click to collapse
don' t worry about this
Diesel779 said:
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
Click to expand...
Click to collapse
Thank you for your link.
Could I ask, If i flash this over my european moto x will it turn it into a GB version in settings and receive future OTA updates? I assume it should.
Likewise do I need to unlock my boot loader to flash this, or will putting into fast boot do.
Thanks for your advice in advance.
nookcoloruser said:
Thank you for your link.
Could I ask, If i flash this over my european moto x will it turn it into a GB version in settings and receive future OTA updates? I assume it should.
Likewise do I need to unlock my boot loader to flash this, or will putting into fast boot do.
Thanks for your advice in advance.
Click to expand...
Click to collapse
Yes and yes and no you don' t need to unlock. But why do this as the reteu model received the update before the retgb model, you can just sideload the ota if you didn't get it yet?
Firmware retail BR XT1032: http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail BR XT1033: http://www.filefactory.com/file/3buo0jqjvn41/BRASIL_XT1033_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail Asia XT1033:http://www.filefactory.com/file/5vpmod6c5sdh/ASIARETAIL_XT1033_5.0.2_LXB22.46-28_cid7_CFC.xml.zip
Credits: Firmware Team
Are... those.... official images of lillipop rom for stock motorola oem ? Oooooh awesome. Now we need to know what to flash stright from GPE 5.0.1 so it would work perfectly.
Maybe move it to development section so it won't blend in spam threads in this general ?
But that would be nice to upload it somewhere where it would take shorter than 2h to download.
Here is the updated flashing guide
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Yes, there are 4 system chunks this time
so this one will work right out of the box, right? I want to try brazilian rom, since my carrier is refusing to unlock my imei with gpe rom. I think it's nonsense, the unlock code will probably fail with this one as well.
cristiand391 said:
Firmware retail BR XT1032: http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail BR XT1033: http://www.filefactory.com/file/3buo0jqjvn41/BRASIL_XT1033_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail Asia XT1033:http://www.filefactory.com/file/5vpmod6c5sdh/ASIARETAIL_XT1033_5.0.2_LXB22.46-28_cid7_CFC.xml.zip
Credits: Firmware Team
Click to expand...
Click to collapse
error, file not found
moses_dx said:
so this one will work right out of the box, right? I want to try brazilian rom, since my carrier is refusing to unlock my imei with gpe rom. I think it's nonsense, the unlock code will probably fail with this one as well.
Click to expand...
Click to collapse
I think you will need to unlock the bootloader, and changing the firmware will not change your IMEI either.
and the links work.
anyone have mirror link ?
i don have premium account for file factory
waiting for mirror link, just got 20kbps
AgentChaos said:
I think you will need to unlock the bootloader, and changing the firmware will not change your IMEI either.
and the links work.
Click to expand...
Click to collapse
Yes, of course the Imei has never been touched but my carrier says it can't be unlocked because I messed with the rom
Mirror
XT1032 BR
Google Drive : https://drive.google.com/file/d/0B_2QjjWMyLghc3RkanZ1MVNhTVU/view?usp=sharing
XT1033 Asia
Google Drive : https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view?usp=sharing
:fingers-crossed:
mirror please for asia
Sandivisi said:
mirror please for asia
Click to expand...
Click to collapse
mirror
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view?usp=sharing
:fingers-crossed:
MoeMoeKu said:
mirror
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view?usp=sharing
:fingers-crossed:
Click to expand...
Click to collapse
naah, thanks
Anyone tested it and flashed all straight from GPE 5.0.1 to this firmware?
brainscollector said:
Anyone tested it and flashed all straight from GPE 5.0.1 to this firmware?
Click to expand...
Click to collapse
I flashed BR firmware image for XT1032 over GPE 5.0.1
No Fastboot errors
Everything seems to work good
Sent from my Moto G
this is for XT1033 5.0.2 BR
Google Drive : https://drive.google.com/file/d/0B_2QjjWMyLghV3hMYWVoSFo0WHc/view?usp=sharing
:fingers-crossed:
AgentChaos said:
Here is the updated flashing guide
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Yes, there are 4 system chunks this time
Click to expand...
Click to collapse
Can I flash on xt 1033 cm12 ?
all good in my case also
Well, I'm stuck on boot animation
Edit:
Damn, that took so long. First boot was about 15 minutes !
mirror link for asia plz
i can't download in filefactory and gdrive
Read Before You Flash
A cautionary advice. If you unlock your bootloader the warranty of all non eu devices are lost. Also to claim warranty of an unlocked EU device you'll need to live in the European Union. Also locking the bootloader won't give back the warranty.
If you came on xda to root and modify your phone, you'll probably need to follow these guides first
For instructions regarding installation of stock firmware head over here
To Restore back to stock head over here
Please keep the discussion regarding each topic separate in their individual threads itself. It'll make managing the threads a lot more easier. This thread is for posting stock firmware only
Happy Flashing
Stock Firmware Files for Moto E
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Credits
@lohanbarth for lte firmware
thanks @Lucas Eugene
here are the fastboot code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
MOTOEFLASHALL.bat
lohanbarth said:
thanks @Lucas Eugene
here are the fastboot code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
MOTOEFLASHALL.bat
Click to expand...
Click to collapse
Thanks I forgot to correct it after seeing the firmware images. Thanks a lot for making the parts more clear
any stock firmware for the XT1527? Its the lte US varient i suppose.
Any firmware for XT1526? 4G US Boost Mobile LTE.
phliptrip said:
Any firmware for XT1526? 4G US Boost Mobile LTE.
Click to expand...
Click to collapse
Not sure this thread is being updated or not but no im afraid.
fix-this! said:
Not sure this thread is being updated or not but no im afraid.
Click to expand...
Click to collapse
Bro at least let the firmware images be released or leaked.
Lucas Eugene said:
Bro at least let the firmware images be released or leaked.
Click to expand...
Click to collapse
i know but i said currently there is no cdma nor US based stock firmware yet from moto. i think users should know that before they try to root or flash anything.
fix-this! said:
i know but i said currently there is no cdma nor US based stock firmware yet from moto. i think users should know that before they try to root or flash anything.
Click to expand...
Click to collapse
Ah! My fault but from what I heard Motorola never releases the firmwares they leak. Also the site as sfdev is down so I think it'll probably take longer
Lucas Eugene said:
Stock Firmware Files for Moto E
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
@Lucas Eugene
my device is moto e 2015 3g
I unlocked bootloader to root it, after that i read carefully that it meant for LTE version, i then locked the bootloader again without doing anything at same time,
Then when i reboot it gives me "invalid system image" error, and refuses to boot. Then again i unlocked bootloader, it went well, its working
I want to make my device as it was when i purchased it.
Any stock firmware available for my device.
Please suggest some workaround to overcome the above problem.
santoshvaza said:
@Lucas Eugene
my device is moto e 2015 3g
I unlocked bootloader to root it, after that i read carefully that it meant for LTE version, i then locked the bootloader again without doing anything at same time,
Then when i reboot it gives me "invalid system image" error, and refuses to boot. Then again i unlocked bootloader, it went well, its working
I want to make my device as it was when i purchased it.
Any stock firmware available for my device.
Please suggest some workaround to overcome the above problem.
Click to expand...
Click to collapse
You can't reverse time and go back to the original Bootloader state ever. If you lock after unlocking it would just give you a code 1 instead of 3. Also if you live outside the EU your warranty is void as soon as you unlock.
There's no harm to unlock if you don't go further to install unstable operating systems.
Also the firmware for the non lte hasn't been leaked yet
@lohanbarth
can you arrange stock for moto e 2nd gen 3g version?
How about Unlock Bootloader !!
Lucas Eugene said:
Stock Firmware Files for Moto E
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
Nice!
Now if we could get the stock US version (XT1527_RETUSALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml)
will this XT1524 version work for a US 4G-LTE variant XT1527? Would it be possible to flash to this, then unlock the bootloader/root/etc?
Moto E xt1514
Moto E2 xt1514 please
I can help
juniklx said:
Moto E2 xt1514 please
Click to expand...
Click to collapse
I have a New device, non-rooted and original bootloader.
I can help, but, don't knew how.
How make a backup, of all??
Moto E xt1514
juliovieira said:
I have a New device, non-rooted and original bootloader.
I can help, but, don't knew how.
How make a backup, of all??
Click to expand...
Click to collapse
yes please
I have found that the new update is not a newer Android version but a security patch according to identifications made in July 2016.
Total size of update is 508.4 MB.
Some people have reported problems with notification sounds.
Do we have any more news about this update.?
Please upload stock rom for indian variant moto g4plus xt1643
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
I have installed the update and everything is working fine for me.
help
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
can u backup ur rom nd upload
navi74644 said:
can u backup ur rom nd upload
Click to expand...
Click to collapse
My phone is not rooted. So I guess I can not take ROM backup.
no need to be rooted
jack_04 said:
My phone is not rooted. So I guess I can not take ROM backup.
Click to expand...
Click to collapse
just put it in fastboot mode and pull the rom
navi74644 said:
just put it in fastboot mode and pull the rom
Click to expand...
Click to collapse
Can You Tell Me How To pull the rom In fastboot mode?
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
How is your phone working now?
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
Motorola claims that they have solved all the reported issues except heating because of its board.
Many people have found that notification volume is decreased to 30%.
Could you share detailed information about what is included in update?
Have you reported this with Motorola?
Milan Samani said:
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
Click to expand...
Click to collapse
If you are using unrooted phone the I would suggest you to report this with Motorola. Let us know how do they respond and if they are willing to offer any quick solution to this issue.
first thing first: I have rooted using systemless root method. so if I update to this latest patch will I have to root it again? and will it be a complete factory reset or I can expect my apps persisting after update?
Sent from my Moto G (4) using Tapatalk
is there any way to update my unlocked bootloader phone ? I tried everything.. Flashed stock recovery... Unroot my phone.. Flash fire etc. nothing works.. Any suggestion will be appriciate.
navi74644 said:
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
Click to expand...
Click to collapse
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
I got this update and after updating, I am facing low notification sound.
Sent from my Moto G (4) using Tapatalk
By my ear notification sound is about 60% what it was before (this is sitting two devices next to each other and comparing the updated device at max volume with the non-updated device, when the nud's volume bar was at ~60℅ they sounded equal). Incidentally 100℅ on the non-updated device was probably a bit too loud.
I've contacted Moto and requested they acknowledge the issue and provide a timeframe for a solution; I have threatened to return both devices to my supplier. I'll share the reply.
The US unlocked XT1644 didnt get any updates. Anybody expecting android 7.0 before the holidays is going to be disappointed.
Pranav Kumar said:
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
Click to expand...
Click to collapse
how to remove warning nd here did get it flashed again i mean which service centre
navi74644 said:
how to remove warning nd here did get it flashed again i mean which service centre
Click to expand...
Click to collapse
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
anhoxhrs said:
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
Click to expand...
Click to collapse
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
navi74644 said:
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
Click to expand...
Click to collapse
Lol this guy who mentioned the stepd just did a copy paste.the url he provided is incomplete.the complete url is - https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view