Database Users

[XT1033][Restore from GPE 4.4.4 to stock Moto 4.4.2]

Disclaimer
What's posted here is tested before sharing
but if something bad happens, it's not my problem.​Originally posted @MotoModTR by »CanERYVZ« to restore the stock firmware of any XT1033 converted to XT1032 GPE 4.4.2 with deej_roamer's instructions posted here,then OTA'd to GPE 4.4.4. I'm just sharing, all credits to »CanERYVZ« :good:
Your device will be restored to XT1033 Asia.retail 4.4.2 successfully
TESTED and WORKS for XT1033 Asia Retail Dual-Sim version.
1- Download 4.4.2 stock version for your device RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
1a- Extract firmware to c:\retail
2- Download stock OTA 4.4.4 file for XT1033 Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03.zip
2a- Extract just the 3 files "gpt.bin", "logo.bin" and "emmc_appsboot.mbn" to c:\retail and overwrite the old ones.
3- Download mfastboot-adb.rar
3a- Extract mfastboot-adb.rar to c:\retail
4- Open CMD (command prompt) and go to C:\retail (type cd c:\retail in cmd)
Note: you need to run command prompt as administrator.
4a- Type the following commands one by one:
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
5- Go to stock recovery. Wipe data / factory reset and wipe cache for a clean start.
ps : motoboot partition will result error because we don't have it in the moto 4.4.4 ota file, just don't worry and continue. :good:
Greetings. :highfive::good:​

So, this will restore the mobile from GPE to Stock 4.4.4 with dual sim capability ?

When does the android s friends

No,
This will restore XT1033 from GPE 4.4.4 to Moto 4.4.2 , but if you like you can OTA to Moto 4.4.4.

When does the android l friends

Awesome, but i have a question.
Some people just take the gpt.bin, replace it to 4.4.2 firmware pakage and flash without flashing motoboot.img.then ok.
Some people take logo.bin too.
But i did not see anyone take the emmc_appsboot.mbn. can u explain what is emmc_appsboot.mbn
Sorry for being noob.
Btw, how many devices did u test?
Sent from my SM-G900F using Tapatalk

@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
aboot loads the kernel and ramdisk into memory at the addresses requested by the boot image header, and then signature validation is performed after this loading is complete. Because the boot image header is read straight from eMMC flash prior to any signature validation, it contains essentially untrusted data. As a result, it's possible to flash a maliciously crafted boot image whose header values cause aboot to read the kernel or ramdisk into physical memory directly on top of aboot itself!
Click to expand...
Click to collapse
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.

fatihtpr said:
When does the android l friends
Click to expand...
Click to collapse
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...

Semseddin said:
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Click to expand...
Click to collapse
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?

fatihtpr said:
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
Click to expand...
Click to collapse
Xt1032 is one sim version.
Xt1033 is dual sim version
Gửi từ GT-N7105 của tôi bằng cách sử dụng Tapatalk

Thanks windylawyer

Thanks OP...

THANKS!!!
thank youuu good sir! this is total life saver!!

Preflash validation failed
I have got a 1032. Used to have GPE, installed as 4.4.2, OTA upgraded to 4.4.4.
I want to get back the Motorola ROM, 4.4.2, or 4.4.4.
When I tried, I got a few "Preflash validation failed" errors, bootloader complains: "version downgraded for xxx". After the "downgrade" I have got just bootloader and recovery. No sstem can be booted/installed.
I have also tried this script (first few steps), but I have got the same errors for the first 2 commands
Tried with 4.4.2 and 4.4.4 xml.zip versions as well.
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot

... and after the whole thing ran, boot process stops in logo (bootloader is open blahblahblah...)
bootloader / recovery can be started, nothing more.

is this method working successfully??

jbanti said:
is this method working successfully??
Click to expand...
Click to collapse
Yes

can i ota after following this procedure to restore to xt1033 firmware?

pfufle said:
can i ota after following this procedure to restore to xt1033 firmware?
Click to expand...
Click to collapse
YES... u can its fully Stock
Sent from my XT1033

Bootloader unlocked flashing and stuck
Semseddin said:
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
Click to expand...
Click to collapse
please somebody help.....after doing all this my screens blink with logo of BOOTLOADER UNLOCKED........and when i go to the fastbootboot and connect usb it now doesnt recognize it........plz help me save my moto g....plzzzzzzzzzzzzzzzz

[FIRMWARE][XT1032-XT1033] Firmware Lollipop Retail Brasil & Asia 5.0.2

Firmware retail BR XT1032: http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail BR XT1033: http://www.filefactory.com/file/3buo0jqjvn41/BRASIL_XT1033_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail Asia XT1033:http://www.filefactory.com/file/5vpmod6c5sdh/ASIARETAIL_XT1033_5.0.2_LXB22.46-28_cid7_CFC.xml.zip
Credits: Firmware Team

Are... those.... official images of lillipop rom for stock motorola oem ? Oooooh awesome. Now we need to know what to flash stright from GPE 5.0.1 so it would work perfectly.
Maybe move it to development section so it won't blend in spam threads in this general ?
But that would be nice to upload it somewhere where it would take shorter than 2h to download.

Here is the updated flashing guide
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Yes, there are 4 system chunks this time

so this one will work right out of the box, right? I want to try brazilian rom, since my carrier is refusing to unlock my imei with gpe rom. I think it's nonsense, the unlock code will probably fail with this one as well.

cristiand391 said:
Firmware retail BR XT1032: http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail BR XT1033: http://www.filefactory.com/file/3buo0jqjvn41/BRASIL_XT1033_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Firmware retail Asia XT1033:http://www.filefactory.com/file/5vpmod6c5sdh/ASIARETAIL_XT1033_5.0.2_LXB22.46-28_cid7_CFC.xml.zip
Credits: Firmware Team
Click to expand...
Click to collapse
error, file not found

moses_dx said:
so this one will work right out of the box, right? I want to try brazilian rom, since my carrier is refusing to unlock my imei with gpe rom. I think it's nonsense, the unlock code will probably fail with this one as well.
Click to expand...
Click to collapse
I think you will need to unlock the bootloader, and changing the firmware will not change your IMEI either.
and the links work.

anyone have mirror link ?
i don have premium account for file factory

waiting for mirror link, just got 20kbps

AgentChaos said:
I think you will need to unlock the bootloader, and changing the firmware will not change your IMEI either.
and the links work.
Click to expand...
Click to collapse
Yes, of course the Imei has never been touched but my carrier says it can't be unlocked because I messed with the rom

Mirror
XT1032 BR
Google Drive : https://drive.google.com/file/d/0B_2QjjWMyLghc3RkanZ1MVNhTVU/view?usp=sharing
XT1033 Asia
Google Drive : https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view?usp=sharing
:fingers-crossed:

mirror please for asia

Sandivisi said:
mirror please for asia
Click to expand...
Click to collapse
mirror
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view?usp=sharing
:fingers-crossed:

MoeMoeKu said:
mirror
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view?usp=sharing
:fingers-crossed:
Click to expand...
Click to collapse
naah, thanks

Anyone tested it and flashed all straight from GPE 5.0.1 to this firmware?

brainscollector said:
Anyone tested it and flashed all straight from GPE 5.0.1 to this firmware?
Click to expand...
Click to collapse
I flashed BR firmware image for XT1032 over GPE 5.0.1
No Fastboot errors
Everything seems to work good
Sent from my Moto G

this is for XT1033 5.0.2 BR
Google Drive : https://drive.google.com/file/d/0B_2QjjWMyLghV3hMYWVoSFo0WHc/view?usp=sharing
:fingers-crossed:

AgentChaos said:
Here is the updated flashing guide
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Yes, there are 4 system chunks this time
Click to expand...
Click to collapse
Can I flash on xt 1033 cm12 ?

all good in my case also

Well, I'm stuck on boot animation
Edit:
Damn, that took so long. First boot was about 15 minutes !

mirror link for asia plz
i can't download in filefactory and gdrive

[FIRMWARE] XT1068 5.0.2 Retail BRAZIL Firmware

Hey guys, i found out a zip file with the 5.0.2 firmware
Link --> http://www.filefactory.com/file/1j3tpg7jf8dl/RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
(Please, give me mirrors... filefactory it's sooo slow ç.ç)
Instructions:
1. Download 5.02 and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder Download: http://goo.gl/lTYq4F
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
That's all folks! See ya later!

W3ND31 said:
Hey guys, i found out a zip file with the 5.0.2 firmware
Link --> http://www.filefactory.com/file/1j3tpg7jf8dl/RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
(Please, give me mirrors... filefactory it's sooo slow ç.ç)
Click to expand...
Click to collapse
Already made a Easy installer for RETAIL BRAZIL firmware see my signatue (5.0.2) or see Thread here
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612

reefuge said:
Already made a Easy installer for RETAIL BRAZIL firmware see my signatue (5.0.2) or see Thread here
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
Click to expand...
Click to collapse
Sorry man! I had not seen the post , man! :/
How i exclude this?

W3ND31 said:
Sorry man! I had not seen the post , man! :/
How i exclude this?
Click to expand...
Click to collapse
No problem good to have link so people can get only the firmware file

New update (MPJ24.139-63) released on September 9, 2016 for moto G4 plus.

I have found that the new update is not a newer Android version but a security patch according to identifications made in July 2016.
Total size of update is 508.4 MB.
Some people have reported problems with notification sounds.
Do we have any more news about this update.?

Please upload stock rom for indian variant moto g4plus xt1643
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory

I have installed the update and everything is working fine for me.

help
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
can u backup ur rom nd upload

navi74644 said:
can u backup ur rom nd upload
Click to expand...
Click to collapse
My phone is not rooted. So I guess I can not take ROM backup.

no need to be rooted
jack_04 said:
My phone is not rooted. So I guess I can not take ROM backup.
Click to expand...
Click to collapse
just put it in fastboot mode and pull the rom

navi74644 said:
just put it in fastboot mode and pull the rom
Click to expand...
Click to collapse
Can You Tell Me How To pull the rom In fastboot mode?

I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..

How is your phone working now?
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
Motorola claims that they have solved all the reported issues except heating because of its board.
Many people have found that notification volume is decreased to 30%.
Could you share detailed information about what is included in update?

Have you reported this with Motorola?
Milan Samani said:
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
Click to expand...
Click to collapse
If you are using unrooted phone the I would suggest you to report this with Motorola. Let us know how do they respond and if they are willing to offer any quick solution to this issue.

first thing first: I have rooted using systemless root method. so if I update to this latest patch will I have to root it again? and will it be a complete factory reset or I can expect my apps persisting after update?
Sent from my Moto G (4) using Tapatalk

is there any way to update my unlocked bootloader phone ? I tried everything.. Flashed stock recovery... Unroot my phone.. Flash fire etc. nothing works.. Any suggestion will be appriciate.

navi74644 said:
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
Click to expand...
Click to collapse
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )

I got this update and after updating, I am facing low notification sound.
Sent from my Moto G (4) using Tapatalk

By my ear notification sound is about 60% what it was before (this is sitting two devices next to each other and comparing the updated device at max volume with the non-updated device, when the nud's volume bar was at ~60℅ they sounded equal). Incidentally 100℅ on the non-updated device was probably a bit too loud.
I've contacted Moto and requested they acknowledge the issue and provide a timeframe for a solution; I have threatened to return both devices to my supplier. I'll share the reply.

The US unlocked XT1644 didnt get any updates. Anybody expecting android 7.0 before the holidays is going to be disappointed.

Pranav Kumar said:
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
Click to expand...
Click to collapse
how to remove warning nd here did get it flashed again i mean which service centre

navi74644 said:
how to remove warning nd here did get it flashed again i mean which service centre
Click to expand...
Click to collapse
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot

anhoxhrs said:
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
Click to expand...
Click to collapse
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u

navi74644 said:
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
Click to expand...
Click to collapse
Lol this guy who mentioned the stepd just did a copy paste.the url he provided is incomplete.the complete url is - https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view

Moto g6 plus on startup bootloop

Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated

First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...

WoKoschekk said:
First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...
Click to expand...
Click to collapse
I'm not sure, can you tell me how to find it,
Sorry for being so stupid

Barb28n said:
I'm not sure, can you tell me how to find it,
Sorry for being so stupid
Click to expand...
Click to collapse
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.

It is the moto g6 plus, international version,
WoKoschekk said:
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.
Click to expand...
Click to collapse
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help

Barb28n said:
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help
Click to expand...
Click to collapse
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you

Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
What exactly have you done...? Do you know how to flash a new firmware or not??
---------- Post added at 05:53 AM ---------- Previous post was at 05:19 AM ----------
A little guide to get the correct firmware for your device:
1. go to fastboot mode
2. type the following command
Code:
fastboot getvar ro.carrier
the output will be:
Code:
ro.carrier: [I]your software channel[/I]
3. follow this link:
https://mirrors.lolinet.com/firmware/moto/evert/official/
and choose "your software channel"
(e.g. reteu / retail / retin, etc.)
4. download the latest firmware
***********************************************
How to flash a new firmware
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
But do not use the firmware from this page!!
!!Only use the firmware you downloaded in step 4. !!

juampapo546 said:
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you
Click to expand...
Click to collapse
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.

Barb28n said:
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.
Click to expand...
Click to collapse
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274

WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thanks, I will try it, I have done it before,but not for a while. Trying to keep this a se
cret from Hubby as he will go ballistic!! LOL

WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!

Barb28n said:
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!
Click to expand...
Click to collapse
Download and extract the logo.zip attachment. It contains a logo.bin file. Copy logo.bin to /sdcard (internal storage), open terminal app and type:
Code:
su
dd if=/sdcard/logo.bin of=/dev/block/by-name/logo`getprop ro.boot.slot_suffix`
Reboot and enjoy your new logo!
On the top left corner you'll see the 'Verity mode is set to disabled' message which is quiet normal.

I am having the same exact problem as the OP (except I haven't done anything to my phone lately, it just ran out of battery, shut down, and went into endless bootloop after I charged it up).
I tried following the above instructions (my software channel is RETLA) and found two "latest" versions as of this posting (and both zip files were found identical by the diff command, as were their contents after I unzipped them)-- XT1926-6_EVERT_RETLA_SS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
I tried flashing the XT1926-7 one and my phone is still in a boot loop. Since the other file is identical, I'm not expecting it to work either. So, which version of these firmwares is the correct one to use?
I thought that the point was that all these would work with a G6plus in the RETLA channel and some were just newer than others.
Thanks.
---------- Post added at 07:00 AM ---------- Previous post was at 06:07 AM ----------
I tried an earlier one, XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-8_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and got...
Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device.
Click to expand...
Click to collapse
I went back to the earliest available 9.0 firmware, XT1926-7_EVERT_RETLA_9.0_PPW29.116-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip, flashed that, and still the above message.
Can anybody help?
Thanks.
---------- Post added at 07:03 AM ---------- Previous post was at 07:00 AM ----------
I do have TWRP installed on my SD card. Can that be used to unbrick the phone?
---------- Post added at 07:20 AM ---------- Previous post was at 07:03 AM ----------
...and wiping the cache from TWRP didn't fix it either -- still the same message about data being corrupt. Now I'm truly out of ideas.

Boot into fastboot mode to see which FW is the correct one for you.

Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
Well, i read this post and answers till the end, as it describes very well my problem, but no such solution, so if someone could help would be great !
The device is Moto G6 plus XT1926-8 and i still have all acess to fastboot, and recovery by pressing keys, i've already flashed this roms:
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-18_subsidy-DEFAULT_regulatory-DEFAULT_CFC
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-15_subsidy-DEFAULT_regulatory-DEFAULT_CFC
stockrom.net_XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC
in this order, but always got an infinite bootloop that sometime comes to inicial screens where you can click "start" set wifi, etc, but the device always restart no matter i click into it, or wait till a suposed "end" of restart rotine, that never came, always come to a restart showing my unlocked bootloader screen etc etc. I could suggest now try flashing a android 8 version rom, but for my experience, i have fear (not knowledge) that could something go wrong with radios and i finish not getting signal, so i came here looking for some help, if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !

ASPViTo said:
if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !
Click to expand...
Click to collapse
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.

Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
WoKoschekk said:
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.
Click to expand...
Click to collapse
Hi bro, and thanks for the attention !
Answers: No, never used magisk. No other tools for root, if is this your question ! Only tool i have used is "Moto Auto Flash Tool v8.2 By Jamesjerss" that i used to unlock bootloader. All other flash process was done was using that list of commands everyone knows:
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
About that command "mfastboot erase userdata" you mention,
I found that this command is always used in the list above "user data erased" was used on all tryes of flashsing!
- correct boot slot?
I dont know what you mean about, maybe something like "fix" boot slot, if so, no, i dont know how to do it, if you can provide a link for me to read about, i thank you, if there was a chance of the device stop this infinites restarts.
Boot into recovery and wipe all data, i did every flash attempt, that had fail, as way to recover the device, no sucess so far, phone stills rebooting to unlocked bootloader screen that goes to motorola logo, that goes to briefly entrance of welcome screen, or nor this, restart reboot again, i observed that after various tries it hangs alone and stills a black screen, that only goes out if i long press power button looking a forced shut off, but it doenst stays turned of, this restart process, restart again. Any clues or ideas ?

ASPViTo said:
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
Click to expand...
Click to collapse
Did you use exactly the same commands? Apart from the fact that you should count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.

WoKoschekk said:
Did you use exactly the same commands? Apart from the fact that you count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.
Click to expand...
Click to collapse
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot flash vendor vendor.img_sparsechunk.5
mfastboot flash vendor vendor.img_sparsechunk.6
mfastboot flash vendor vendor.img_sparsechunk.7
mfastboot flash vendor vendor.img_sparsechunk.8
mfastboot flash vendor vendor.img_sparsechunk.9
mfastboot flash vendor vendor.img_sparsechunk.10
mfastboot flash vendor vendor.img_sparsechunk.11
mfastboot flash vendor vendor.img_sparsechunk.12
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
used this one, something that can improved ?

ASPViTo said:
used this one, something that can improved ?
Click to expand...
Click to collapse
yes, don't use it!
Where did you get the firmware from?
---------- Post added at 11:00 PM ---------- Previous post was at 10:44 PM ----------
Every single command applies to the corresponding file within the firmware.zip. The first command list you posted is the correct one but those two lines vendor.img...3+4 are useless because the files don't exist and cannot be flashed. Delete them and try again.