Database Users

[Stock Official][Firmware][XT1033] Asia Retail [Dual Sim][4.4.4][Lock Bootloader]

4.4.4 is now Pre-installed on Moto G, Now you can flash full stock 4.4.4. not required to first falling back to 4.4.2 and then updating the system to 4.4.4.
Code:
Model number: Moto G
Android version: 4.4.4
Baseband version: MSM8626BP_1032.355.66.00R
Kernel version: 3.4.42-gb2383d6 [email protected] #1 Fri Jun 20 00:05:34 CDT 2014
System version: 210.12.40.falcon_umtsds.AsiaRetail.en.03.zip
Build number: KXB21.14-L1.40
Instructions 4.4.4:
1. Download the Package and Extract it to a folder.
2. Download mfastboot-v2 and Extract it into the same folder. Download: http://goo.gl/i8Tsy9
3. Reboot the phone into Bootloader.
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one.
If you do not wish to lock bootloader skip 4.1 and 4.3.
4.1
Code:
mfastboot.exe oem lock begin
4.2
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
4.3
Code:
mfastboot.exe oem lock
4.4
Code:
mfastboot.exe reboot
Downloads 4.4.4:
1.http://goo.gl/gXxeM6
or
2.http://goo.gl/JGfUk0
or
3.http://goo.gl/KB0lbQ by @jri3
Lets start by Thanking a few people:
@deej_roamer [For Guidance]
@jri3 [For Mirror]
@archies20 [its me]
Anyone willing to mirror the link is welcome!
If it helped, Hit thanks

I create a mirror on dev-host
Code:
http://d-h.st/oEg

jri3 said:
I create a mirror on dev-host
Code:
http://d-h.st/oEg
Click to expand...
Click to collapse
Thanks!! Adding your mirror.

Thank you so much, you save my friend's Moto-G life!!!

omegahanggara said:
Thank you so much, you save my friend's Moto-G life!!!
Click to expand...
Click to collapse
Ohh yeah :good: Its my pleasure

This looks like a direct lift from this thread http://forum.xda-developers.com/showthread.php?t=2700502 . Atleast change the wordings or credit the source.

I guess 4.4.4 link is not available:cyclops: on that forum that's all matter....don't comment anything just for fun
these are standard procedure....

ajeetone said:
I guess 4.4.4 link is not available:cyclops: on that forum that's all matter....don't comment anything just for fun
these are standard procedure....
Click to expand...
Click to collapse
Ya its not available on that thread thats why i create this thread. :victory:

unknownemous said:
This looks like a direct lift from this thread http://forum.xda-developers.com/showthread.php?t=2700502 . Atleast change the wordings or credit the source.
Click to expand...
Click to collapse
Thanks For Your Suggestion. :good:

I tried to relock my moto g (indian dual sim) using these instructions and after relock the boot logo still shows up as bootloader unlocked warning.
any idea on how to get rid of this bootlogo?

mla123 said:
I tried to relock my moto g (indian dual sim) using these instructions and after relock the boot logo still shows up as bootloader unlocked warning.
any idea on how to get rid of this bootlogo?
Click to expand...
Click to collapse
Check in fastboot if your device is locked. If it is then flash original logo.bin file to remove warning message.

unknownemous said:
Check in fastboot if your device is locked. If it is then flash original logo.bin file to remove warning message.
Click to expand...
Click to collapse
The device status is now locked. I tried to flash the logo.bin that came inside 4.4.4 zip, but the warning remains..
is there any other logo.bin file that needs to be flashed to remove the warning. If yes then where can I find it?
also since the device is now locked won't there be any problem flashing modified .bin files?

mla123 said:
The device status is now locked. I tried to flash the logo.bin that came inside 4.4.4 zip, but the warning remains..
is there any other logo.bin file that needs to be flashed to remove the warning. If yes then where can I find it?
also since the device is now locked won't there be any problem flashing modified .bin files?
Click to expand...
Click to collapse
I'm on phone currently. Search moto g forums for "remove boot loader warning screen". There is no problem flashing the file.

mla123 said:
I tried to relock my moto g (indian dual sim) using these instructions and after relock the boot logo still shows up as bootloader unlocked warning.
any idea on how to get rid of this bootlogo?
Click to expand...
Click to collapse
You flash full stock firmware?? or only use relock command??

mla123 said:
I tried to relock my moto g (indian dual sim) using these instructions and after relock the boot logo still shows up as bootloader unlocked warning.
any idea on how to get rid of this bootlogo?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2548530

archies20 said:
http://forum.xda-developers.com/showthread.php?t=2548530
Click to expand...
Click to collapse
that worked.. :good:

Greate :good:

My baseband version is MSM8626BP_1032.390.81.01P, ROW_DSDS_CUST
Will this procedure still work?

soumitro316 said:
My baseband version is MSM8626BP_1032.390.81.01P, ROW_DSDS_CUST
Will this procedure still work?
Click to expand...
Click to collapse
yup it works

Tnks for the share, downloading Rite now...
Sent from my Moto G XT1033 using Tapatalk

[GUIDE][NOOB FRIENDLY] Explaining Boot loader Locking [ERROR][FIX]

Hi , guys after been long time i jumped from my old Galaxy Ace to these MOTO G2 , the concept of rooting and flashing on the Ace was very different from these new devices , we used to have one click flash got ROOT and again with one flash we got UNROOT , tada !
But in these devices for rooting we need to first unlock the boot loader and then we are free to root it or flash or any modding , but what if have to unroot and lock the boot loader ? , though unrooting is a quite a just one click we got unrooted phone but at the time of locking Bootloader we face errors .But why to lock it again ? though every one has different thinking but these is for those who want to lock . But at the time of locking ERRORS What are they ? how to solve them ? searching over the whole Internet but didn't found a proper solution ! So these type of situation is very critical for new users who are new to these like me ( jokes apart) . So below i have explained a little bit & a fail safe process , I am not taking about tools and download links for them just a process .
Click to expand...
Click to collapse
Various ERRORS which we face like
Code:
(bootloader) sst lock failure!
OKAY [ 0.011s]
finished. total time: 0.012s
Code:
failed to validate system image
Code:
Executing ".\Windows\fastboot.exe flash boot boot.img"
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.505s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.090s
Click to expand...
Click to collapse
These type of error we face while locking boot loader , now do note these things first of check out the build number of your phone & download the same build number firmware , or if there is updated version then you can download that . Because OEM doesn't allow you to downgrade the system it will give you error like system downgrade started & then failed to validate system image so flash the same build version firmware or higher one . By doing these follow the same steps as stated here @archies20 in his thread
Click to expand...
Click to collapse
Code:
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
Click to expand...
Click to collapse
Now by following the above procedure in the between watch out in your phone the screen will be black , and you will get to see the Locked status will be written after that the last error will be like
Code:
C:\MOTOROLA\mfastboot-v2>mfastboot.exe oem lock
...
FAILED (status read failed (Too many links))
finished. total time: 20.117s
But don't get panic the boot loader will be locked still the Unlock warning logo will be there so just flash the logo.bin .
Click to expand...
Click to collapse
Note : Don't try to lock the boot loader after flashing the firmware it will give you error like
Code:
(bootloader) sst lock failure!
OKAY [ 0.011s]
finished. total time: 0.012s
so follow the above procedure only , if you checked out the whole thing then there will be 0% chances of failing .
I hope you will found these thread very helpful ,
Thankyou
Click to expand...
Click to collapse
.
EDIT : You can downgrade via Fastboot not mFastboot.

Bootloader warning
I followed the steps exactly , and the only error occurred was the one you mentioned ,
but the "bootloader unlocked warning " still remains after i flashed the logo
what is the soulution ?
thankyou,

Good job hitesh :good:

If i relock the bootloader will miss the root?

Sebastian94 said:
If i relock the bootloader will miss the root?
Click to expand...
Click to collapse
Yes.

archies20 said:
Good job hitesh :good:
Click to expand...
Click to collapse
Thanks buddy , just i cleared all doubt's and errors .

ghostcoder said:
I followed the steps exactly , and the only error occurred was the one you mentioned ,
but the "bootloader unlocked warning " still remains after i flashed the logo
what is the soulution ?
thankyou,
Click to expand...
Click to collapse
First just check the Bootloader status in bootloader menu , if it is locked then just flash the logo.bin that's it .

OK, first you are giving instructions to flash the firmware and then to send command "lock oem" (the last line).
Later in your post:
Note : Don't try to lock the boot loader after flashing the firmware it will give you error like
sst lock failed.
This is exact error everyone gets, even following your steps (lock begin -> flash firmware -> oem lock).
This guide is misleading.

linasmit said:
OK, first you are giving instructions to flash the firmware and then to send command "lock oem" (the last line).
Later in your post:
Note : Don't try to lock the boot loader after flashing the firmware it will give you error like
sst lock failed.
This is exact error everyone gets, even following your steps (lock begin -> flash firmware -> oem lock).
This guide is misleading.
Click to expand...
Click to collapse
You are not getting properly , i told that after flashing firmware and after booting it , then taking back into boot loader now in these state if you will give command then it wont work !!
That's the point i have explained in that Note .
And above what ever i have written it is 100% working not only tested by but also some other users .

Cannot relock bootloader
Hitesh2626 said:
.
Click to expand...
Click to collapse
I have Global version. then flashed US version and upgrade to lollipop. Later decided to go back to Global version for using CF-autoroot. SO I downgraded to KitKaT US first. I again then changed to global version.
The problem is, now, I cannot relock bootloader. I can chage to us and also in us version i cannot relock.
While I flash Fastboot flash boot boot.img it says downgrading; same for Fastboot flash system system.img_sparsechunk.0; downgrading error as well as invalid piv signed system image error.
Thus after mfastboot.exe oem lock command, it gives SST lock failure ! failed to validate system image in device display.
Applied flash according to :
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
Click to expand...
Click to collapse
my mobile version info is attached

Anonymous 360 said:
I have Global version. then flashed US version and upgrade to lollipop. Later decided to go back to Global version for using CF-autoroot. SO I downgraded to KitKaT US first. I again then changed to global version.
The problem is, now, I cannot relock bootloader. I can chage to us and also in us version i cannot relock.
While I flash Fastboot flash boot boot.img it says downgrading; same for Fastboot flash system system.img_sparsechunk.0; downgrading error as well as invalid piv signed system image error.
Thus after mfastboot.exe oem lock command, it gives SST lock failure ! failed to validate system image in device display.
Applied flash according to :
my mobile version info is attached
Click to expand...
Click to collapse
+1 i cant flash the stock rom with mfastboot.exe oem lock begin if i use tht command .. am facing failed to validate system image plz help me to get out of here plz:crying:

pradeepmaddy said:
+1 i cant flash the stock rom with mfastboot.exe oem lock begin if i use tht command .. am facing failed to validate system image plz help me to get out of here plz:crying:
Click to expand...
Click to collapse
You can try this, for the first time with US version, as far as i can remember, it worked for me. But now, after downgrading and changing back to the global version, it is not working.....
Fastboot oem lock begin
Fastboot flash partition gpt.bin
Fastboot flash motoboot motoboot.img
Fastboot flash logo logo.bin
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Fastboot flash system system.img_sparsechunk.2
Fastboot flash system system.img_sparsechunk.3
Fastboot flash modem NON-HLOS.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg.mbn
Fastboot erase cache
Fastboot erase userdata
Fastboot oem lock
Fastboot reboot
Click to expand...
Click to collapse
please, inform me, if it works

Anonymous 360 said:
You can try this, for the first time with US version, as far as i can remember, it worked for me. But now, after downgrading and changing back to the global version, it is not working.....
please, inform me, if it works
Click to expand...
Click to collapse
The user u have quoted is trying to lock the bootloader for Global version retaildsds.en03
If it works then its well & good..

Solved! Solved! Solved!
YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!!!!
After lots of flashing, at last ::fingers-crossed:
followed these steps:
after downgrading, go to bootloader, install twrp 2801 and flash supersu2.16 (that means, root your device ! ))
reboot and copy your lollipop update file (same variant) to the internal storage
now, again go to bootloader and flash the recovery: Fastboot flash recovery recovery.img
Now go to recovery and select your lollipop update... ta-da.... explanation:
After entering recovery node, Press the Volume Up and Volume Down buttons for around 5 seconds. Now while holding those two, press and release the Power button.
Your device will now be booted into stock recovery mode, displaying Android System Recovery <3e> text at the top of the screen.
apply adb trougt sdcard.... select file AND WAIT TO THE PROCess to finish
You dont need to lock the bootloader at all :good: :good:
Hit thanks if it helps

Anonymous 360 said:
YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!!!!
After lots of flashing, at last ::fingers-crossed:
followed these steps:
after downgrading, go to bootloader, install twrp 2801 and flash supersu2.16 (that means, root your device ! ))
reboot and copy your lollipop update file (same variant) to the internal storage
now, again go to bootloader and flash the recovery: Fastboot flash recovery recovery.img
Now go to recovery and select your lollipop update... ta-da.... explanation:
After entering recovery node, Press the Volume Up and Volume Down buttons for around 5 seconds. Now while holding those two, press and release the Power button.
Your device will now be booted into stock recovery mode, displaying Android System Recovery <3e> text at the top of the screen.
apply adb trougt sdcard.... select file AND WAIT TO THE PROCess to finish
You dont need to lock the bootloader at all :good: :good:
Hit thanks if it helps
Click to expand...
Click to collapse
Do you still have your device rooted after lollipop update?

Anonymous 360 said:
I have Global version. then flashed US version and upgrade to lollipop. Later decided to go back to Global version for using CF-autoroot. SO I downgraded to KitKaT US first. I again then changed to global version.
The problem is, now, I cannot relock bootloader. I can chage to us and also in us version i cannot relock.
While I flash Fastboot flash boot boot.img it says downgrading; same for Fastboot flash system system.img_sparsechunk.0; downgrading error as well as invalid piv signed system image error.
Thus after mfastboot.exe oem lock command, it gives SST lock failure ! failed to validate system image in device display.
Applied flash according to :
my mobile version info is attached
Click to expand...
Click to collapse
Anonymous 360 said:
YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!!!!
After lots of flashing, at last ::fingers-crossed:
followed these steps:
after downgrading, go to bootloader, install twrp 2801 and flash supersu2.16 (that means, root your device ! ))
reboot and copy your lollipop update file (same variant) to the internal storage
now, again go to bootloader and flash the recovery: Fastboot flash recovery recovery.img
Now go to recovery and select your lollipop update... ta-da.... explanation:
After entering recovery node, Press the Volume Up and Volume Down buttons for around 5 seconds. Now while holding those two, press and release the Power button.
Your device will now be booted into stock recovery mode, displaying Android System Recovery <3e> text at the top of the screen.
apply adb trougt sdcard.... select file AND WAIT TO THE PROCess to finish
You dont need to lock the bootloader at all :good: :good:
Hit thanks if it helps
Click to expand...
Click to collapse
bro am in kitkat now... i dont want to go with us variants again but i want to lock boot loader in kitkat itself please give me the solution for tht

I afraid I do not have a solution......
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
You still have SU app, but you will not have the binary, so you have to appy CF auto root : http://forum.xda-developers.com/moto-g-2014/help/solved-cf-chainfire-autoroot-problem-t2942154

Help please
pradeepmaddy said:
+1 i cant flash the stock rom with mfastboot.exe oem lock begin if i use tht command .. am facing failed to validate system image plz help me to get out of here plz:crying:
Click to expand...
Click to collapse
I've got an XT1068 bought in UK.......and stuck with the same problem after upgrading to lollipop (xt1063 way) and downgrade.
I cant' lock the bootloader and if I install a stock firmware trying to locking it i receive a lot of FAILED messaged (in partition,motoboot,boot, system system.img_sparsechunk1-2-3....) And can't lock with "SST lock failure ! failed to validate system image" error.
What I have to do? T_T Can someone help me please? I want to bring back everything as before...clean!
If I try to install a stock rom and i don't try to lock the bootloader i receive FAILED error only in the first 2 strings
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
and this never happen. What I have to do for locking the bootloader again? :\ I try with fastboot instead of mfastboot commands too..but...same results.
Thanks.... :crying:

After reading numerous threads about relocking the bootloader, I came to the conclusion that after a downgrade it's simply impossible to relock the bootloader.
So, if you have, for instrance, an XT1068 and you have flashed the US build of Lollipop on it, the only way to make it 'stock' is to downgrade to KitKat, since there is no official Lollipop build for the XT1068 yet. This means that you will be unable to lock the bootloader. You'll have to wait for an official Lollipop build, install that manually, and then relock the bootloader.
So in short: after a downgrade (as from Lollipop to Kitkat) it's impossible to lock the bootloader!
Please correct me if I'm wrong!

smitharro said:
After reading numerous threads about relocking the bootloader, I came to the conclusion that after a downgrade it's simply impossible to relock the bootloader.
So, if you have an XT1068 and you have flashed the US build of Lollipop on it, the only way to make it 'stock' is to downgrade to KitKat, since there is no official Lollipop build for the XT1068 yet. This means that you will be unable to lock the bootloader. You'll have to wait for an official Lollipop build, install that manually, and then relock the bootloader.
Please correct me if I'm wrong!
Click to expand...
Click to collapse
According Motorola downgrading from lolipop to kitkat is not possible
Moto G (2nd Generation) - Android™ 5.0 Lollipop - Release Notes
INTRODUCTION
We are excited to announce a new software update for Moto G (2nd Generation) by Motorola. This update brings Android™ 5.0 Lollipop to your phone along with other improvements.
For more information on Motorola updates and repairs, visit us at www.motorola.com/mymotog.
NOTE: You cannot downgrade to a previous software version after installing this update.

[Q] Cannot relock bootloader

I have Global version. then flashed US version and upgrade to lollipop. Later decided to go back to Global version for using CF-autoroot. SO I downgraded to KitKaT US first. I again then changed to global version.
The problem is, now, I cannot relock bootloader. I can chage to us and also in us version i cannot relock.
While I flash Fastboot flash boot boot.img it says downgrading; same for Fastboot flash system system.img_sparsechunk.0; downgrading error as well as invalid piv signed system image error.
Thus after mfastboot.exe oem lock command, it gives SST lock failure ! failed to validate system image in device display.
Applied flash according to :
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
Click to expand...
Click to collapse
my mobile version info is attached

Short answer: You can still use the ota zip with unlocked bootloader.
(it won't let you relock if you're Downgrading)

savnex said:
Short answer: You can still use the ota zip with unlocked bootloader.
(it won't let you relock if you're Downgrading)
Click to expand...
Click to collapse
Is there a long answer too?
I'm trying to understand it....i've got the same problem and I want to know in which situation i will be able to lock the bootloader again. Maybe with the lollipop release for xt1068?
I've got an XT1068 bought in UK.......and stuck with the same problem after upgrading to lollipop (xt1063 way) and then, after problems with root, downgrade.
I cant' lock the bootloader and if I install a stock firmware trying to lock the BL it i receive a lot of FAILED messaged (in partition,motoboot,boot, system system.img_sparsechunk1-2-3....) And can't lock with "SST lock failure ! failed to validate system image" error.
If I try to install a stock rom and i don't try to lock the bootloader i receive FAILED error only in the first 2 strings (gpt.bin and motoboot.img) ...maybe it's a normal beahvior. Don'tknow.
But this never happened before. Any suggestion / explanation? ^^
Thank you very much.

Apparently you are too lazy to find a solution, and it is here A very short answer. Use fastboot instead mfastboot.
Next time do not post threads with questions that are already answered.

Am I too lazy? trying with fastboot is one of the first things I did. And it gives exatly the same result.
Fortunatly a more polite user told me that it's normal that i cant relock the bootloader because i upgraded to lollipop and I can't relock downgrading.
Sent from my XT1068 using XDA Free mobile app

Iruhoru said:
Am I too lazy? trying with fastboot is one of the first things I did. And it gives exatly the same result.
Fortunatly a more polite user told me that it's normal that i cant relock the bootloader because i upgraded to lollipop and I can't relock downgrading.
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
That's true, you can't relock again if you upgraded to Lollipop.

[XT1063] downgrade to 21.11.17 4.4.4 then update to 22.21.28 5.0.2

Bootloader unlock required to avoid downgrade PIV Signature errors in fastboot.
Download firmware for XT1063 21.11.17 here
http://motofirmware.com/files/download/950-retuglb-xt1063-444-kxb2185-17-cid9-cfcxmlzip/
I flashed firmware using @Shawn5162's scrpt, but replaced the 21.11.23 files with the ones from the link above.
http://forum.xda-developers.com/showthread.php?t=2957167
or you can do it manually via fastboot:
adb reboot bootloader
Fastboot flash partition gpt.bin
Fastboot flash motoboot motoboot.img
Fastboot flash logo logo.bin
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Fastboot flash system system.img_sparsechunk.2
Fastboot flash system system.img_sparsechunk.3
Fastboot flash modem NON-HLOS.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg.mbn
Fastboot flash erase cache
Fastboot flash erase userdata
fastboot reboot
Then I applied all the following OTAs successfully:
Note: download and copy all OTAs to SD card downloads folder then install via STOCK Recovery apply update from SD Card
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-11-6-android-t2939881
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-16-t2965161
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-25-t2978658
http://forum.xda-developers.com/showthread.php?p=58136321
Please hit the thanks if it worked and report back.
P.S.
Still unable to lock bootloader until 5.0 firmware released.

Android The Greek said:
First my bootloader is unlocked as I would always get PIV Signature errors in fastboot when downgrading.
Second, I have not be able to look the bootloader at all since I have been on Lollipop before.
Download firmware for XT1063 21.11.17 here
http://motofirmware.com/files/download/950-retuglb-xt1063-444-kxb2185-17-cid9-cfcxmlzip/
I then flashed firmware using Shawn152's scrpt, but replacing the 21.11.23 files with the ones from the link above.
or you can do it manually:
adb reboot bootloader
Fastboot flash partition gpt.bin
Fastboot flash motoboot motoboot.img
Fastboot flash logo logo.bin
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Fastboot flash system system.img_sparsechunk.2
Fastboot flash system system.img_sparsechunk.3
Fastboot flash modem NON-HLOS.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg.mbn
Fastboot flash erase cache
Fastboot flash erase userdata
fastboot reboot
Then I applied all the following OTAs successfully:
Note: download and copy all OTAs to SD card downloads folder then install via STOCK Recovery apply update from SD Card
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-11-6-android-t2939881
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-16-t2965161
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-25-t2978658
Please hit the thanks if it worked and report back. This should help all those stuck on 22.11.6. Please make sure you go all the way back to 21.11.17 first before reporting back.
Click to expand...
Click to collapse
I presume that you MAY NOT have to flash whole rom, if you 'JUST' flashed the needed version of recovery then you can upgrade with a OTA zip (can't test as only got xt1068) maybe someone can test this - but obviously some OTA's rely on being updated in order.

This is for XT1063 Only!

Android The Greek said:
Bootloader unlock required to avoid downgrade PIV Signature errors in fastboot.
Download firmware for XT1063 21.11.17 here
http://motofirmware.com/files/download/950-retuglb-xt1063-444-kxb2185-17-cid9-cfcxmlzip/
I flashed firmware using @Shawn5162's scrpt, but replaced the 21.11.23 files with the ones from the link above.
http://forum.xda-developers.com/showthread.php?t=2957167
or you can do it manually via fastboot:
adb reboot bootloader
Fastboot flash partition gpt.bin
Fastboot flash motoboot motoboot.img
Fastboot flash logo logo.bin
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Fastboot flash system system.img_sparsechunk.2
Fastboot flash system system.img_sparsechunk.3
Fastboot flash modem NON-HLOS.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg.mbn
Fastboot flash erase cache
Fastboot flash erase userdata
fastboot reboot
Then I applied all the following OTAs successfully:
Note: download and copy all OTAs to SD card downloads folder then install via STOCK Recovery apply update from SD Card
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-11-6-android-t2939881
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-16-t2965161
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-25-t2978658
Please hit the thanks if it worked and report back. This should help all those stuck on 22.11.6. Please make sure you go all the way back to 21.11.17 first before reporting back.
P.S.
Still unable to lock bootloader.
Click to expand...
Click to collapse
Bootloader can easily be locked. I've done it & even made a one click to do it as well. However I was able to update to 5.0 without the bootloader being locked. I'm back on KitKat for the third time. I'm not willing to give up root & deal with all the bugs of L.
There is also a custom ROM in these forms that run smoother than the stock & easier to install but still has the root bug.

kingmt01 said:
Bootloader can easily be locked. I've done it & even made a one click to do it as well. However I was able to update to 5.0 without the bootloader being locked. I'm back on KitKat for the third time. I'm not willing to give up root & deal with all the bugs of L.
There is also a custom ROM in these forms that run smoother than the stock & easier to install but still has the root bug.
Click to expand...
Click to collapse
What model do you have?
I can assure you I am not new at this, I bought my phone from Amazon with 21.11.23 and there was an addition added at some point that prevents a downgrade and in turn does not allow the system to be flashed with a locked or unlocked bootloader if you start with the command Fastboot oem lock begin.
if you have an XT1063 please tell me how you locked your bootloader without modifying anything that will then be unreversable.
Don't take it the wrong way, but I have seen people create tools that edit the hex to show bootloader locked then they can no longer unlock it or corrupt the phone and brick.

Android The Greek said:
What model do you have?
I can assure you I am not new at this, I bought my phone from Amazon with 21.11.23 and there was an addition added at some point that prevents a downgrade and in turn does not allow the system to be flashed with a locked or unlocked bootloader if you start with the command Fastboot oem lock begin.
if you have an XT1063 please tell me how you locked your bootloader without modifying anything that will then be unreversable.
Don't take it the wrong way, but I have seen people create tools that edit the hex to show bootloader locked then they can no longer unlock it or corrupt the phone and brick.
Click to expand...
Click to collapse
ETA: I'm not going to get upset over anything in a forum. I just post info to the best of my knowledge in hope to be helpful to someone else. Sometimes that changes as more knowledge is gained.
I have a xt1063 .17 & I did use "fastboot oem lock begin" I don't remember every command but the one click also restored the stock firmware at the same time. I'll have to look at my files in a few. I only made about 20 one clicks & was writing & rewriting a how to guide all at the same time as I was trying to figure it out & get on 5.0 all at the same time. Like I said tho my bootloader is unlocked again & it doesn't seem to affect the ability to flash OTA.
---------- Post added at 12:43 PM ---------- Previous post was at 11:55 AM ----------
OK. I used mfastboot to lock it.
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem lock

kingmt01 said:
ETA: I'm not going to get upset over anything in a forum. I just post info to the best of my knowledge in hope to be helpful to someone else. Sometimes that changes as more knowledge is gained.
I have a xt1063 .17 & I did use "fastboot oem lock begin" I don't remember every command but the one click also restored the stock firmware at the same time. I'll have to look at my files in a few. I only made about 20 one clicks & was writing & rewriting a how to guide all at the same time as I was trying to figure it out & get on 5.0 all at the same time. Like I said tho my bootloader is unlocked again & it doesn't seem to affect the ability to flash OTA.
---------- Post added at 12:43 PM ---------- Previous post was at 11:55 AM ----------
OK. I used mfastboot to lock it.
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem lock
Click to expand...
Click to collapse
I never said anything about needing to relock it. I just said I have not been able to for those of us that want 5.0.1 and want to lock the bootloader. If you are able to price steps on how you downgraded from 5.0 and locked the boot loader I sure would want to try it myself.
Ideally I would add in the commands above fastboot OEM lock begin and fastboot OEM unlock for those who want a relocked boot loader before flashing the otas. Its just not possible if you are not on 21.11.17 to begin with because of the signed zip downgrade verification

Android The Greek said:
I never said anything about needing to relock it. I just said I have not been able to for those of us that want 5.0.1 and want to lock the bootloader. If you are able to price steps on how you downgraded from 5.0 and locked the boot loader I sure would want to try it myself.
Ideally I would add in the commands above fastboot OEM lock begin and fastboot OEM unlock for those who want a relocked boot loader before flashing the otas. Its just not possible if you are not on 21.11.17 to begin with because of the signed zip downgrade verification
Click to expand...
Click to collapse
Stating that it didn't need locked to flash 5.0 is just added info for anyone fallowing the thread & based on my experience. That may change for flashing 5.0.1.
These commands was ran from a modified 21.11.17 build to lock the bootloader. I thought I read ether in this thread or another thread that you already found a way to flash back to the stock firmware 21.11.17 without the downgrade error. If your on stock 21.11.17 now then you could give the lock command a try from mfastboot. I restored a Nandroid to get back to KitKat from Lollipop.
The one click I made was for those that had tampered with their stock 21.11.17 & wanted to be back to stock & locked. I didn't even know there was a 21.11.23 build at the time.

kingmt01 said:
Stating that it didn't need locked to flash 5.0 is just added info for anyone fallowing the thread & based on my experience. That may change for flashing 5.0.1.
These commands was ran from a modified 21.11.17 build to lock the bootloader. I thought I read ether in this thread or another thread that you already found a way to flash back to the stock firmware 21.11.17 without the downgrade error. If your on stock 21.11.17 now then you could give the lock command a try from mfastboot. I restored a Nandroid to get back to KitKat from Lollipop.
The one click I made was for those that had tampered with their stock 21.11.17 & wanted to be back to stock & locked. I didn't even know there was a 21.11.23 build at the time.
Click to expand...
Click to collapse
Correct!

Android The Greek said:
Bootloader unlock required to avoid downgrade PIV Signature errors in fastboot.
Download firmware for XT1063 21.11.17 here
http://motofirmware.com/files/download/950-retuglb-xt1063-444-kxb2185-17-cid9-cfcxmlzip/
I flashed firmware using @Shawn5162's scrpt, but replaced the 21.11.23 files with the ones from the link above.
http://forum.xda-developers.com/showthread.php?t=2957167
or you can do it manually via fastboot:
adb reboot bootloader
Fastboot flash partition gpt.bin
Fastboot flash motoboot motoboot.img
Fastboot flash logo logo.bin
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Fastboot flash system system.img_sparsechunk.2
Fastboot flash system system.img_sparsechunk.3
Fastboot flash modem NON-HLOS.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg.mbn
Fastboot flash erase cache
Fastboot flash erase userdata
fastboot reboot
Then I applied all the following OTAs successfully:
Note: download and copy all OTAs to SD card downloads folder then install via STOCK Recovery apply update from SD Card
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-11-6-android-t2939881
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-16-t2965161
http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-21-25-t2978658
Please hit the thanks if it worked and report back. This should help all those stuck on 22.11.6. Please make sure you go all the way back to 21.11.17 first before reporting back.
P.S.
Still unable to lock bootloader.
Click to expand...
Click to collapse
Worked like a charm! Thank you so much, Updated my moto g 2014 xt1063 21.11.23 KitKat 4.4.4 Amazon unocked global using this method. :good:

Thank you for reporting in appreciate it

help
hello,i am somewhat new to these things but surely i can do it with detailed steps(thanks for those)
so here is the thing,i bought Moto G2 from amazon last month and my mobile has these details
System Version:-
21.11.23.titan_retuglb.retuglb.en.US retus
Build Number- KXB21.85-23
i am bored with KitKat ..
a few ques:-
After this tricky update will i be eligible for future updates too?
Can i root after the Lolipop update?
WIl this method format my mobile?
Thanks.
(sry for newbie type ques )

kkriop said:
hello,i am somewhat new to these things but surely i can do it with detailed steps(thanks for those)
so here is the thing,i bought Moto G2 from amazon last month and my mobile has these details
System Version:-
21.11.23.titan_retuglb.retuglb.en.US retus
Build Number- KXB21.85-23
i am bored with KitKat ..
a few ques:-
After this tricky update will i be eligible for future updates too?
Can i root after the Lolipop update?
WIl this method format my mobile?
Thanks.
(sry for newbie type ques )
Click to expand...
Click to collapse
You will get updates. You can Root, however I do not think there is a stable root yet. If you unlock your boot loader it will format, if you already unlocked your boot loader then you will not loose your data.

Android The Greek said:
You will get updates. You can Root, however I do not think there is a stable root yet. If you unlock your boot loader it will format, if you already unlocked your boot loader then you will not loose your data.
Click to expand...
Click to collapse
Its fine w/o root..as far as i am getiing lollipop experience.. My bootloader is unlcoked..will do the thing and post ..thanks again

kkriop said:
Its fine w/o root..as far as i am getiing lollipop experience.. My bootloader is unlcoked..will do the thing and post ..thanks again
Click to expand...
Click to collapse
No problem

Android The Greek said:
No problem
Click to expand...
Click to collapse
downgrade complete now the issue is when i check System Updates it doesnt pick up Lollipop update
and these manual update links doesnt open is there any mirror link?? :crying:

Do you mean you cannot download from mega?
Which one you need I'll put it in my Dropbox and pm you

Android The Greek said:
Do you mean you cannot download from mega?
Which one you need I'll put it in my Dropbox and pm you
Click to expand...
Click to collapse
The two from mega (first two) third one is already on dropbox so not a prob for that..
Thank u very much

so is safe to install ota updates with bootloader unlocked?

CrazyGenio said:
so is safe to install ota updates with bootloader unlocked?
Click to expand...
Click to collapse
Yes an unlocked boot loader has no effect on anything except the abity to flash a custom recovery. If your unlocked and have it all stock, then you should be good

[GUIDE] [XT1022] Restore Stock 4.4.4 firmware

Many users are not able to manually update their XT1022 to 5.0.2 as they are not having stock firmware on their phones. That's why while updating they are encountering these errors and they are fed up !
The common errors being faced are :
Status 7 error while installation/unexpected contents error/System says a new update is ready to be installed and when you press "I am in", the phone reboots and while installation you see a dead android "android with a red error mark" and then the phone reboots to 4.4.4 and says that the last update was unsuccessful !
To avoid these errors, you need to be on stock firmware before updating manually.
Please note that if you are flashing pure untouched ROM/pure optimised ROM, then it doesn't mean you are flashing STOCK FIRMWARE ! FIRMWARE means a lot more. And you can't flash firmware through recovery !
Many people are flashing pure XT1022 ROM and then they are saying that "I have flashed Stock firmware but then also I am getting UNEXPECTED CONTENTS ERROR WHILE UPDATING" !
If you want to flash stock firmware, follow these steps :
Download and install Moto E drivers on your pc. Link : https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/99012/p/30,6720,9146
Download mfastboot files and extract the files in a folder. Link : https://drive.google.com/folderview?id=0B05Crz57q4zgZE1aVW5FT1RsUUU&usp=sharing
Download Stock firmware for XT1022 and extract the files to the same folder. Link : https://drive.google.com/file/d/0B05Crz57q4zgY2lWUE9KZjlGeVU/view?usp=sharing
Now, reboot your phone into bootloader by pressing volume down + power for a few seconds. You will see the bootloader screen.
Go to the folder where you have extracted Stock Firmware and mfastboot files and open command prompt there (Press shift + right mouse button and click on open command prompt)
Now, its the time to enter commands. Execute these lines of command one by one checking that each command you executed returned ok !
commands :
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
If every command you entered was successfully executed, your phone will reboot into stock firmware !
Now, you can upgrade to 5.0.2 manually
Hit thanks, if helped

prince.d.emperor said:
Many users are not able to manually update their XT1022 to 5.0.2 as they are not having stock firmware on their phones. That's why while updating they are encountering these errors and they are fed up !
The common errors being faced are :
Status 7 error while installation/unexpected contents error/System says a new update is ready to be installed and when you press "I am in", the phone reboots and while installation you see a dead android "android with a red error mark" and then the phone reboots to 4.4.4 and says that the last update was unsuccessful !
To avoid these errors, you need to be on stock firmware before updating manually.
Please note that if you are flashing pure untouched ROM/pure optimised ROM, then it doesn't mean you are flashing STOCK FIRMWARE ! FIRMWARE means a lot more. And you can't flash firmware through recovery !
Many people are flashing pure XT1022 ROM and then they are saying that "I have flashed Stock firmware but then also I am getting UNEXPECTED CONTENTS ERROR WHILE UPDATING" !
If you want to flash stock firmware, follow these steps :
Download and install Moto E drivers on your pc. Link : https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/99012/p/30,6720,9146
Download mfastboot files and extract the files in a folder. Link : http://dl-1.va.us.xda-developers.com/2/4/2/7/6/6/7/mfastboot-v2.zip?key=gTbaSY_MHMqZMNf7yehIpg&ts=1423902465
Download Stock firmware for XT1022 and extract the files to the same folder. Link : https://mega.co.nz/#!SUZA3AbR!P_qdV24-ZpqSwKhCPjifBcd7en7Y7AkBZpRApb2loHs
Now, reboot your phone into bootloader by pressing volume down + power for a few seconds. You will see the bootloader screen.
Go to the folder where you have extracted Stock Firmware and mfastboot files and open command prompt there (Press shift + right mouse button and click on open command prompt)
Now, its the time to enter commands. Execute these lines of command one by one checking that each command you executed returned ok !
commands :
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
If every command you entered was successfully executed, your phone will reboot into stock firmware !
Now, you can upgrade to 5.0.2 manually
Hit thanks, if helped
Click to expand...
Click to collapse
Both mfastboot and stock firmware links are not working..
Pls update it with new links...
And also I need the stock recovery...
I think the problem lies in the recovery..

I will upload it on Google drive by evening !
And recovery file is there in Stock firmware.
Sent from my XT1022 using XDA Free mobile app

salman.student said:
Both mfastboot and stock firmware links are not working..
Pls update it with new links...
And also I need the stock recovery...
I think the problem lies in the recovery..
Click to expand...
Click to collapse
Link updated !
Do check :good:

prince.d.emperor said:
Link updated !
Do check :good:
Click to expand...
Click to collapse
Thank u very much

version downgraded for partition error ..

YES!!!!!!!!!!!!!!!!!!!!!
salman.student said:
Both mfastboot and stock firmware links are not working..
Pls update it with new links...
And also I need the stock recovery...
I think the problem lies in the recovery..
Click to expand...
Click to collapse
yES! yES! YES! AFTER TRYING 11 TIMES AND INVESTING A 13 HOURS I FINALLY ABLE TO UPDATE AFTER I FLASH THE STOCK RECOVERY IMG FROM THIS THREAD- http://forum.xda-developers.com/moto-e/general/stock-recovery-recovery-img-t3031437
NOTE I HAVE MOTO E XT1022,UNROOTED AND BL LOCKED. I FLASHED 4.4.4 WITH THE HELP OF THIS THREAD PREVIOUSLY!
ALTAST I GOT LOLLIPOP

Worked like a charm. Thanks.