Database Users

[Noob] The Noob Guide to Rooting 2.3.3 (hboot 2.16)

I rooted my phone this last Monday with great success, and have been happily flashing ROMs ever since. I have had a few friends/aquaintances asking me how to do this, so I thought I would post this here to help them, and hopefully a few others here.
Special thanks to evilecho. I just added a few “noob” steps to his amazing tutorial.
If installed, uninstall HTC Sync. This is very important!
Backup anything you need backed up off your phone. Most things on your phone will be safe but back everything up just to be sure.
Download SuperUser zip & Amon_RA’s recovery (if you don’t want to use the Clockwork Mod recover that ships with Revolutionary)
Note: Many people are advising that people new to rooting use Amon_RA’s recovery. Amon_RA’s recovery is very simple, reliable, and very solid and does everything you need to flash a new ROM, if you would like.​
Copy both to your root of SD card
Download and install HTC Drivers
Download Revolutionary: S-OFF & Recovery Tool
Note: The download link is at the bottom of the page. You will need to enter your EVO’s Serial number which is located under the battery. Make sure you to copy/write down the beta key. You will need it later)​
Copy the beta key to Notepad or a similar app
On your EVO:
Enable USB debugging mode: Go to Settings –> Applications –> Development –> check box for USB debugging [/INDENT]
Disable Fast boot: Go to Settings –> Power –> check box for Fast Boot
Connect your EVO to your PC with a USB cable - Select Charge Only
Unzip the Revolutionary tool and run it as admin (to run as admin, right click and select run as admin)
Open a command prompt (Start -> Run -> cmd)
Navigate to the folder where you unzipped the Revolutionary tool
Type revolutionary.exe
The tool will recognize your device
Enter/paste the beta key that you pasted into Notepad
Note: to paste into the command prompt, right click on the top bar of the window -> Edit -> Paste​
The phone will fastboot twice
It will ask you if you want to install the Clockwork Mod recovery. Select Yes.
Note: Instructions to switch to Amon_RA to follow.​
After Revolutionary is complete, boot into the bootloader (if not already there) by turning off the phone, then hold the power button and the down volume button for a few seconds. You should then see “Revolutionary” at the top, and “S-OFF”.
The phone should now ask you if you want to update the recovery (by recognizing the PC36IMG.zip file that we downloaded and copied to the SD card of the phone). Select yes. This will update your recovery to Amon_RA's.
Use the up and down arrow keys and choose “Recovery” by pushing the power button
Choose “Flash zip from sdcard”
Choose “Choose zip from sdcard”
Use the up arrow key to move you to the bottom of the list, then look for “su-2.3.6.3-efgh-signed.zip” and push the power button to select
Push the power button again to accept
You are now rooted!
At this point, I would recommend going to this awesome thread by sekigah84, which will walk you through creating a Nanroid backup and flashing ROMs. Enjoy!
As always, this will void your warranty and may possibly damage your phone. You and you alone are responsible for anything that you do. Everything contained in this thread is for informational purposes only.​
If any of the amazing other readers/contributors here on XDA find any discrepancies here, please let me know!​

[HOWTO] Flashing CM for noobs! Heimdall on Windows

Long time lurker, first time poster. I'm coming from a iPhone (it was a hand-me-down, I swear!) and a HTC Snap, so my Note II LTE (N7105) is my very first Android. I got sick of waiting for Samsung to release 4.2/3, hence I'm flashing Cyanogenmod. Being a n00b myself, I couldn't find any n00b friendly guides on how to flash my phone, so here's to hoping this little guide will help someone!
All that follows are from my own experience, and may or may not work on your phone. I'm not responsible for anything that happens to your phone.
I'm sorry for the lifehacker URL, I don't have the required posts to post outside links
First things first, rooting your phone is NOT required. See li feha ck er.c0m / you-dont-need-root-to-flash-custom-rom-using-third-par-1090733218
1) CHARGE YOUR PHONE
1a) Backup your phone. I used Helium, search for it on Google Play
1b) Remove your SD card, just in case.
2) Download and install Visual C++ and Heimdall, links from wiki.cyanogenmod.org/ w/Install_ CM_for_t0lte
2a) Download ClockworkMod Recovery, rename it recovery.img and place it in the same folder as Heimdall.exe
2b) Reboot your computer.
3) Download Cyanogenmod from get.cm, and Google Apps from goo.im/gapps. They should both be .zip files
3a) Transfer them to /sdcard/ on your phone
4) Power off your phone, and then get it to Download Mode (hold down Vol down + Home + Power)
4a) Connect your phone to your computer directly, not through a hub.
4b) Open Heimdall, Drivers, and run Zadig.exe
4c) Click on Options on top, and select List All Devices
4d) Select Samsung USB Composite Device or MSM8x60 or Gadget Serial or Device Name from the drop down menu
4e) Click on the big button with Install WCID Driver. There should be a popup saying that the driver was successfully installed
5) Close Zadig.exe, and open a Command Prompt window. (Go to the start menu and type cmd in the blank box)
5a) Navigate to the folder with Heimdall.exe. (use cd to change directories, ie type "cd [path]")
5b) Enter "heimdall flash --recovery recovery.img --no-reboot", press enter, and stare intently on your phone for a blue bar
5c) If all goes well, the bar should appear, and once it's filled up (took less than a minute on my phone), close the Command Prompt window and unplug your phone
6) Go into Recovery Mode (hold down Vol up + Home + Power)
6a) Using the volume buttons and home button, select Install Zip From SDCard, and then flash the Cyanogenmod .zip first, and then Google Apps .zip
6b) Select Wipe Data/Factory Reset
6c) You're done!
Sources : http://forum.xda-developers.com/showthread.php?t=2384231 and http://wiki.cyanogenmod.org/w/Install_CM_for_t0lte
All thanks should go to these two for their guides!

[4.4.2] Root, Deodex, Bootloader Unlock/ Relock, Roms Kernels list, Themes, Mods

=Brief Introduction=​This thread will consist of information about Rooting, Flashtool, Bootloader, Kernel and Roms.
Xda have been helping me a lot, so I have decided to start with the most basic way to help since I have no idea on software development. Hope everything is correct, if anything is wrong please leave a comment below.
Also, I BELIEVE the ADMIN would most probably lock this thread up again. I initially did not intend to repost another thread, however @eclyptos had me convinced to repost this for the sake of newbies, since it will be locked but not deleted.
If you support me, give me more thanks, and maybe post some posts below to help to convince the admin not to lock this.
Thanks.
=Part 1 Rooting the latest KitKat 4.4.2 Firmware=
For Locked Bootloaders
Required files: ​
14.1.G.1.534 FTF file
Link: http://forum.xda-developers.com/show....php?t=2469191
(You many choose anyone you wish, for it will be overwritten after that)
Move file to C:\Flashtool\firmwares or wherever you installed flashtool to.
Root Many Android by Bin4ry
Link: http://uploaded.net/file/d2w6dl7r
Latest Flashtool
Link: http://www.flashtool.net/download.php
(Please make sure you use v9.15 and above)
Note: Please make sure fastboot and flashtool drivers are installed.
Help on installation on windows 8: http://forum.xda-developers.com/show....php?t=2095087
Dual Recovery
Link: http://forum.xda-developers.com/show....php?t=2647487
( Choose the latest version, read instructions on the site.)
14.2.A.0.290 Flashable files (C690X_14.2.A.0.290.flashable.zip and C690X_14.2.A.0.290_Stripped.ftf )
Link: http://forum.xda-developers.com/show....php?t=2572988
Note: Please transfer zip file to external sd card
Move ftf file to C:\Flashtool\firmwares or wherever you installed flashtool to.
14.3.A.0.681 Flashable files (C690X_14.3.A.0.681.flashable.zip and C690X_14.3.A.0.681_Stripped.ftf)
Link: http://forum.xda-developers.com/show....php?t=2687443
Note: Please transfer zip file to external sd card
Move ftf file to C:\Flashtool\firmwares or wherever you installed flashtool to.
Lets Get Started:​
1. Make sure phone is charged to at least 50%
2. Enable USB Debugging on your phone and switch to MSC mode
How to: Setting >About Phone>Tap Build Number a few times > Go back > Enter developer options > Enable usb debugging
Setting >Xperia Connectivity> USB Connectivity> MSC mode
3. Back up all apps or app data you wish to keep (contacts, applications, messages and photos that are in your internal storage)
How to: Use Helium from Play Store to backup app data or any other apps, make sure backup is saved to cloud or external sd card
5. Flash 14.G.1.534 Firmware.
How to: Power off device.
Hold Volume Down button
Plug in USB cable to computer and phone
Open flashtool and click lightning.
CHoose flashmode.
Choose 14.1.G.1.534
And FLASH!
6. Root it
How to: Turn device on
Enable USB Debugging
Open Root with Bin4ry file and run 'Run Me' file
Connect phone to pc
Select 0 (xperia root by .......)
7. Install dual recovery
How to: Open dual recovery file and open 'Install' file
Choose option 1
Grant Superuser permissions when requested
Phone will reboot.
8. Install 14.2.A.0.290 Flashable zip
HOw to: power off Phone
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode
Wipe ( enter Wipe > Advanced WIpe > Tick Everything but external sd card and Otg)
After wipe, press back and slide factory reset
Install zip ( press install and find file)
It will take a few minutes
Do not press reboot system, press back key until first page and then click reboot key.
Select power off.
9. INstall Stripped FTF 14.2.A.0.290
How to: Hold Volume DOwn button
Plug in usb cable to computer and phone
Open flashtool and click lightning.
CHoose flashmode.
Choose 14.2.A.0.290 Generic NCB
And FLASH!
10. Power on
11. Install 14.3.A.0.681 Flashable zip
HOw to: power off Phone
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode
Wipe ( enter Wipe > Advanced WIpe > Tick Everything but external sd card and Otg)
After wipe, press back and slide factory reset
Install zip ( press install and find file)
It will take a few minutes
Do not press reboot system, press back key until first page and then click reboot key.
Select power off.
12. . INstall Stripped FTF 14.3.A.0.681
How to: Hold Volume DOwn button
Plug in usb cable to computer and phone
Open flashtool and click lightning.
CHoose flashmode.
Choose 14.2.A.0.290 Generic NCB
13. Reboot and you are done!
Unlocked Boot loader​
Required Files:​
14.3.A.0.681
Link: http://forum.xda-developers.com/show....php?t=2469191
Move file to C:\Flashtool\firmwares or wherever you installed flashtool to.
DoomKernel v10 or up ( or any other 4.4 kernel)/XZDR Kernel
Link: http://forum.xda-developers.com/show....php?t=2448613
Unzip file.
SuperSu flashable zip
Link:http://forum.xda-developers.com/show....php?t=1538053
Transfer to external SD card
Latest Flashtool
Link: http://www.flashtool.net/download.php
(Please make sure you use v9.15 and above)
Note: Please make sure fastboot and flashtool drivers are installed.
Help on installation on windows 8: http://forum.xda-developers.com/show....php?t=2095087
Lets Get started:​
1. Make sure phone is charged to at least 50%
2. Enable USB Debugging on your phone and switch to MSC mode
How to: Setting >About Phone>Tap Build Number a few times > Go back > Enter developer options > Enable usb debugging
Setting >Xperia Connectivity> USB Connectivity> MSC mode
3. Back up all apps or app data you wish to keep (contacts, applications, messages and photos that are in your internal storage)
How to: Use Helium from Play Store to backup app data or any other apps, make sure backup is saved to cloud or external sd card
4. Flash 14.3.A.0.681 Firmware.
How to: Power off device.
Hold Volume Down button
Plug in USB cable to computer and phone
Open flashtool and click lightning.
Choose 14.3.A.0.681
And FLASH!
5. Power on. Test if everything is working well, camera and others.
6. Fastboot DooMKernel
How to: Power off device.
Hold Volume Up button
Plug in USB cable to computer and phone
Open flashtool and click lightning.
Choose Fastboot
Choose Boot.img that was in the unzipped file
And FLASH!
7. Reboot and let phone start
8. Install root.
How to: Power off
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode.
Install SuperSu file that was downloaded.
9. Reboot and you are READY!!
=Part 2: Deodexing=
Firstly, what is deodex?​
From @philo64:
Deodexed ROMs (or APKs) have all their application packages put back together in one place, allowing for easy modification such as theming.
The advantage of .odex file is the faster load time of the app and were supposed to quickly build the dalvik cache, removing them would mean longer initial boot times.
And finally rooting need not necessarily mean your device is deodexed, rather that almost all stock ROMs are odexed to some extent, and usually most custom ROMs are deodexed for easy theming.
For a casual user, the main implication is in theming possibilities. Themes for android come in APKs too, and if you want to modify any of those, you should always choose a dedoexed custom ROM.
In summary to install custom themes, install certain mods, you would need to have a deodexed phone. To check if your phone is deodexed, you can check at system/app/Phone.apk ===>where you will find this together with it ===> system/app/Phone.odex
Locked & Unlocked Bootloader
Required files:​
FLASHABLE deodex zip
Link: http://forum.xda-developers.com/showthread.php?t=2690160
Note: Download the file which matches your phones model number. Please transfer this file to somewhere in your phone.
Requirements​
Recovery is required for flashing.
Lets get started:​
Flash the file
How to: Power off
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode.
Install Deodex file that was downloaded.
Done! As simple as that!
=Part 3 :Unlocking Bootloader=​
What does unlocking the bootloader do?
Unlocking the boot loader allows you to put custom ROMs on your device. Also, it allows you to install custom kernels that could potentially improve the performance, battery life and others. However, unlocking the bootloader can potentially brick your device if you do stupid things like cross flashing and others. So be warned, I am not really clear about the warranty status, do it at your own risks. Most probably nothing will happen.
:laugh:
Before unlocking bootloader, please backup TA just for precautions.
To backup TA, please use computer application: backup TA and run it.
Details and download can be found here: http://forum.xda-developers.com/showthread.php?t=2292598
Requirements and Warnings for unlocking bootloader
​
What you need to do:​
Backup all data. All data on the phone will be deleted, whole phone will be formatted. I do not know about the external sd card as I have never tried it, you could take it out as a precaution.
Backup Ta with backup Ta
What you would need:​
IMEI Number
How to: Enter *#06# in dialer and copy the imei number out
An email
Fastboot package
Link: http://doomlord.xperia-files.com/download.php?dlid=YWRiX2Zhc3Rib290
Xperia drivers
Link: http://forum.xda-developers.com/showthread.php?t=2635830
PC and usb cable
Lets get STARTED!​
1. Go to http://unlockbootloader.sonymobile.com/unlocking-boot-loader
2. Read Everything.
3. Go through all process, there will be many prompts, just click Accept/ Proceed
4. Finally you will reach a 'Create unlock boot loader key request' Page. Enter your Name Imei Number and Email.
5.Go to your email and you would most probably recieve an email about bootloader unlocking. If you dont, patiently wait.
6. You will recieve and unlock key, KEEP THIS KEY SAFELY. ( what i do is screenshot the email and save the pic in google drive.:good: )
7.Extract fastboot_with_Android_USB_file.rar and open fastboot folder
8. Enter fastboot mode
How to:
Power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will make the phone enter FASTBOOT mode.
9.Hold SHIFT and right click on the background of the folder
10.Select 'Open command window here'
11.Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above)
12.In the cmd windows type in fastboot.exe -i 0x0fce getvar version
13.If a value is returned (it will return 0.5), it means the phone is correctly connected
14.Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key which u received earlier.
You're device should now be bootloader unlocked
=Part 4:Roms List (Updated as of 5th of April)=​
1.RomAur v6.3 [ LB-UB ] - KK4.4.2- c690x - 14.3.A.0.681 - FAST-STABLE - AROMA - ONLINE [Last updated: 04/04 ]
Link: http://forum.xda-developers.com/showthread.php?t=2481248
2.iHackers v3.0 [Last Update: 02/04]
Link: http://forum.xda-developers.com/showthread.php?t=2539008
3.[LB&UB] C690X ★ monxDIFIED ★ Honam1Z™ (KK) FULL-ROOT on LB [v05-01][07/04] AROMA [Last updated: 07/04]
Link: http://forum.xda-developers.com/showthread.php?t=2463675
4. [UB/LB] [][][]14.3.A.0.681KitSlimV2.1[][][] [OD/DOD] [FullRoot] [Last updated: 31/03]
Link: http://forum.xda-developers.com/showthread.php?t=2693142
5. [LB&UB]CriskeloROM v4.0[AROMA][Stable][FULL ROOT] [Last updated: 28/03]
Link: http://forum.xda-developers.com/showthread.php?t=2560068
6. Pure Stock v1.1 [Xperia Z1] [Last updated: 12-21]
Link: http://forum.xda-developers.com/showthread.php?t=2579270
7. [DragonSphere Team][Unlock Bootloader]Cyanofire[AOSP][KitKat] [Last updated :24/03]
Link: http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2699803
2. DooMKernel (v11)[20140401]
Link: http://forum.xda-developers.com/showthread.php?t=2448613
3. [KERNEL][CM-based] Pimped Kernel (F2FS|SoundControl|DT2Wake|CPU & GPU OC|Color Control|Voltage|FastCharge|Intelliplug...)
Link: http://forum.xda-developers.com/showthread.php?t=2660679

Hmm, the mods will not take kindly to this
You have already had a similar thread to this locked
http://forum.xda-developers.com/showthread.php?t=2704741
I suspect they may do the same here.
EDIT
Also, although none of your instructions are dangerous you do include several unnecessary steps.

LOL....I am guilty.....

HotKillerZzz said:
I BELIEVE the ADMIN would most probably lock this thread up again.
Click to expand...
Click to collapse
As with the prior thread,
This thread is a duplicate of information already found in these forums.
We expect all members to follow the XDA rules.
Rule #1 SEARCH BEFORE POSTING
If you are able to find the information and learn how to use it, then others will also.
Having multiple thread for the same thing only makes it harder for user to search for the correct information.
If there are errors in the current information then post in that thread how to correct it.
The current sticky info thread has been updated by the OP thru February 2014.
Any further posts like this will not be taken so lightly.
Please re-read the XDA RULES
thread closed

Huwawei Glory/Honor 3C ( H30-U10 ) Resolve Brick or Boot Loop

Hi ,
I soft bricked my huawei honor 3c and have successfully resolved the issue . My phone was in boot loop and i could not Unbrick it with SDCRAD firmware auto update . So i had to flash the original signed recovery (link below) and then i could auto update from the SDCARD . The complete tutorial and links to files used is in the following link.
https://forum.lowyat.net/index.php?showtopic=3237141&st=1260&p=68534687&#entry68534687
I thought ill post it to help others having the same problem and also the additional steps that i performed.
You have to have the Service drivers and SP Flash tool version available on the above link.
Troubleshooting
if your phone is not detecting drivers and is in a loop of vibrating after every few seconds , then remove the battery , connect it to the computer and immediately put the battery back. If its still not working , then probably you need to remove and reinstall the drivers.
Disclaimer
I did not write the guide available at the above link , I only share the above resources and will not be responsible for any consequences with your phone and yourself for using the files and information above. Flash at your own risk and I cannot guarantee your success.

How do i use sp flash to unbrick. pls help me.

Hello,
i have huawei honor 3c h30-u10 phone. The prophet i am facing is when i calls to anyone there is robotic voice others person hearing when i speak, but disconnecting and call second time remove this problem. I am facing this often and costing money due to extra calls.
Anyone has any idea what is wrong?

What to do with no recovery and only vibration
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?

styleevijesh said:
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
Click to expand...
Click to collapse
I encountered the same issue. hopefully someone will help and post a step by step solution.
thanks a lot in advance.

huawei honor h30-u10 keep restarting on logo
please help me how can i fix this issue.

obrhyn said:
I encountered the same issue. hopefully someone will help and post a step by step solution.
thanks a lot in advance.
Click to expand...
Click to collapse
same problem with my phone,
please help

putrafatih said:
same problem with my phone,
please help
Click to expand...
Click to collapse
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
styleevijesh said:
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
Click to expand...
Click to collapse
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.

^^ hi. how do you resolve the vibrating issue? thank you

still not working for me. my h30-u10 keeps vibrating. flashtool succeeded. but nothing happend. still vibrating

putrafatih said:
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
Thanks mate your method work for me and now i can use my mobile normally. once again thanks man. and please upload the relevant file link or their forum area ..

putrafatih said:
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????

No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
Same Problem here... Found any solutions???

No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
Any update????

No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
click on DA dl all with checksum

Not work for me what can i do now i have honor 3c vibrate only

bazaid said:
Not work for me what can i do now i have honor 3c vibrate only
Click to expand...
Click to collapse
Watch tutorials on Youtube for step by step process.
Sent from my Galaxy Tab 3 using XDA Labs

Honor 3c vibrates only
adriansticoid said:
Watch tutorials on Youtube for step by step process.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
I follow the steps
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
But my 3c still vibrates only after success full flashing
Also flash with b108 signed but noworks

bazaid said:
I follow the steps
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
But my 3c still vibrates only after success full flashing
Also flash with b108 signed but noworks
Click to expand...
Click to collapse
Maybe your partitions are destroyed now.
Sent from my honor 5X using XDA Labs

putrafatih said:
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
Hello . when I connect my phone with PC to start the process my phone vibrate and windows detect it and then it vibrate again and disconnect And do this again and again so sp flash tool come with a fail . anyone know why my phone is doing this ( connect and disconnect and keep doing this until I remove USB cable )
Thanx

[NOOBIEST GUIDE]INSTALL ALL REQUIRED DRIVERS AND FULL STOCK ROM+Little tip

So this is a guide for quick full stock installation which is fully compatible with your device
Warning:All of your data will be gone
REQUIREMENTS:A PC A MICRO SD CARD AND A WORKING DATA CABLE
Step One: Download and install Lenovo Moto Smart Assistant
Step 2: go under "Flash" option and then rescue and select the product you are using now choose the model and also select your hw code which i found under battery i dont know yours, and then wait for download.
Step 3:Enable usb debugging and then open cmd and use this command "adb reboot edl" without double quotation marks ofc
Step 4roceed and press ok to all of em
Additional process (follow steps with "a.") OTA installation (i will guide on windows)
a.1Open your explorer and then ur hard drive C: at the top you will see file etc. come to view which is 4th from left and then tick show hidden files (i am using windows Turkish so trying to translate)
a.2:Go ProgramData/LMSA/Download/CountryCodeFiles/a6020xxx____yyy/now choose the file with Country.ota.zip
a.3:Now you can sideload the file (go recovery and then select apply update from ADB)or you can copy it to your sd card and use "Apply update from Sd" using stock recovery and apply it.
AND CONGRATULATIONS! you are now on stock rom with all compatible drivers installed on your drive!
Also this is to everyone, a quick tip:if you cant reboot to download mode which you can do on cmd, you can go to fastboot mode first (Voldown+power)and then keep pressing on VolUp+VolDown+Power (keep doing until you see a whole black or a glowing screen)