Welcome to the NOOB Friendly GUIDE to DUAL BOOT KitKat/JellyBean Roms on Samsung Galaxy S2!!
I know there already many guides on how to dual boot, but I found them confusing and wanted to clean out the process
Prerequisites :
1) Need Atleast 2.5 GB free on Internal Storage
2) Download the 1st Rom (Primary Rom) and save it on any storage on your phone
3) Download Latest Dorimanx Test Kernel v10.xx.xx from Here - http://www.dorimanx.com/beta-test/
4) Download the 2nd Rom (Secondary Rom) and save it on any storage on your phone
Steps :
1)Make sure you are on a KitKat Compatible Recovery
2) Flash any KitKat/JB ROM (along with GAPPS etc.) you want as your Primary ROM
3) Reboot and check weather the ROM is working fine.
4) Reboot to Recovery
5) Flash Dorimanx v10.43.xx Kernel you downloaded earlier
6) Go to advanced in CWM recovery and Reboot Recovery
7) Go to dual boot options in new CWM and select Wipe 2nd ROM data/cache (takes 5-10 minutes)
8) Then select Wipe 2nd ROM dalvik-cache
9) After that Install 2nd ROM from Internal SD card or External SD card and flash the 2nd ROM.
10) Reboot System and Enjoy :laugh:
NOTE : FOR Updating Roms check next post
PLEASE HIT THE THANKS BUTTON :good:
Credits :
@nik60 for his thread
@eskriminal and @dorimanx for Kernel
@Troubadour666 for Patches
And any others i forgot to mention
Updating the Primary ROM :
1) Download the Updated ROM Zip File and Reboot into Recovery
2) Wipe Cache and Dalvik Cache
3) Install ROM update Zip file (followed by GAPPS etc.)
4) Reflash Dorimanx Kernel
5) Reboot
6) Done
Updating the Secondary ROM :
1) Download the Updated ROM Zip File to your phone
2) Reboot into recovery and go to dual boot options
3) Wipe 2nd ROM Dalvik Cache
7) Install the ROM update Zip file ( along with GAPPS etc.)
8) Reboot and Done
Use WhatsApp on both ROM's Simultaneously
1) Make sure you have WhatsApp properly running on your Primary ROM
2) Install Titanium Backup from Play Store on Primary ROM
3) Open Titianium Backup and Backup WhatsApp
4) Boot to your Secondary ROM and install WhatsApp from PlayStore (Only Install dont open the App)
5) Install Titianium Backup in Secondary ROM also and Open it
6) Restore WhatsApp Data via Titanium Backup
7) Done - Now you can use WhatsApp on both ROM without any problems
Good going Ma8:good:
Whooooa :good::good::good:
i update my paches sometimes
But users, please be carrefull , as OP mentioned, only take META-INF folder from my paches, not system folder which have only MALI V2 lib to dualboot KK roms and JB SAMMY STOCK 4.1.2 with DorimanX 8.43vXX, another personal method i use.
From OP we have :
4) Copy META-INF folder from the patch you downloaded to the 2nd ROM Zip by using drag and drop (without extracting)
thanks.
Troubadour666 said:
Whooooa :good::good::good:
i update my paches sometimes
But users, please be carrefull , as OP mentioned, only take META-INF folder from my paches, not system folder which have only MALI V2 lib to dualboot KK roms and JB SAMMY STOCK 4.1.2 with DorimanX 8.43vXX, another personal method i use.
From OP we have :
4) Copy META-INF folder from the patch you downloaded to the 2nd ROM Zip by using drag and drop (without extracting)
thanks.
Click to expand...
Click to collapse
Yes only copy META-INF folder and nothing else
Sent from my GT-I9100 using XDA Premium 4 mobile app
koolkunz said:
Yes only copy META-INF folder and nothing else
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Will soon be adding steps to use WhatsApp on both ROMS without having to reverify everytime
Done Added steps to use WhatsApp on both ROM's without any problems in 2nd Post
Feel free to ask any questions / help !!
If possible please add dualboot KitKat as primary and Sammy 4.1.2 as secondary
montuk said:
If possible please add dualboot KitKat as primary and Sammy 4.1.2 as secondary
Click to expand...
Click to collapse
There is already a thread for that
Sent from my GT-I9100 using XDA Premium 4 mobile app
montuk said:
If possible please add dualboot KitKat as primary and Sammy 4.1.2 as secondary
Click to expand...
Click to collapse
I guess the process will largely be the same.. But first we need to check weather Sammy is Mali v2 or v3...if its v3 then we can follow the same process..if not we will have to downgrade the KitKat ROM to v2
Sent from my GT-I9100 using XDA Premium 4 mobile app
Thanks!
Worked!
koolkunz said:
I guess the process will largely be the same.. But first we need to check weather Sammy is Mali v2 or v3...if its v3 then we can follow the same process..if not we will have to downgrade the KitKat ROM to v2
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sammy Stock JB is Mali V2 only. They have to use Dori's 8.43.xx version foh that...
Anyways, thanks for the great guide! Was planning to Dualboot CM10.2 and CM11 and finding an easy guide, and this one is fantastico! :highfive:
souler456 said:
Sammy Stock JB is Mali V2 only. They have to use Dori's 8.43.xx version foh that...
Anyways, thanks for the great guide! Was planning to Dualboot CM10.2 and CM11 and finding an easy guide, and this one is fantastico! :highfive:
Click to expand...
Click to collapse
Did this guide work with 4.3 ROMs to? I did not try that..
Sent from my GT-I9100 using XDA Premium 4 mobile app
lgomes said:
Thanks!
Worked!
Click to expand...
Click to collapse
I without appreciate if you hit the thanks button
Sent from my GT-I9100 using XDA Premium 4 mobile app
koolkunz said:
I without appreciate if you hit the thanks button
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Would*
Sent from my GT-I9100 using XDA Premium 4 mobile app
koolkunz said:
Did this guide work with 4.3 ROMs to? I did not try that..
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It also works with 4.4 and 4.3 DualBooting, since 4.3 can also use MaliV3 (and also stated on DorimanX Downloads) but use only DorimanX's 10.x Kernel only for those two... Nevah Go Low Bro...
souler456 said:
It also works with 4.4 and 4.3 DualBooting, since 4.3 can also use MaliV3 (and also stated on DorimanX Downloads) but use only DorimanX's 10.x Kernel only for those two... Nevah Go Low Bro...
Click to expand...
Click to collapse
OK thanks for helping
Sent from my GT-I9100 using XDA Premium 4 mobile app
Shall I tweak the same guide for kitkat plus 4.3 or make a new guide for 4.3 ??
Sent from my GT-I9100 using XDA Premium 4 mobile app
souler456 said:
It also works with 4.4 and 4.3 DualBooting, since 4.3 can also use MaliV3 (and also stated on DorimanX Downloads) but use only DorimanX's 10.x Kernel only for those two... Nevah Go Low Bro...
Click to expand...
Click to collapse
What's your setup? Primary n secondary ROMs?
Sent from my GT-I9100 using XDA Premium 4 mobile app
Related
1st. I didn't create this ROM, just asked Kenia1234 what to change and did it.
2nd. Kenia1234, Chiledog, Dexter_nlb, and myself WILL NOT BE HELD LIABLE FOR ANY DAMAGE TO YOUR PHONE!!!!!!!!
This still has the button mapping problem and the auto rotation problem, If you know where a kernel(reoriented for SENSE on this device) is or someone that will make it ask them to do so, and post a link!(PLEASE!!!!!!!!!)
I want to thank Kenia1234, Chiledog, and Dexter_nlb for making this beast ROM, hope to see more progress made!
If already on MIUI or CM7, just reboot into recovery and go to mounts and storages>wipe system, data, datadata, cache> flash GalaxySense.zip and enjoy!!!!!!
Download the following Files-
1.- http://www.oozeroo.com/galaxysense/captivatedownload.html OR http://www.multiupload.com/YH9BF88X9Y but show some love to the oOZerOo website )
2.- http://forum.xda-developers.com/showthread.php?t=978150&highlight=Cyanogenmod OR http://forum.xda-developers.com/showthread.php?t=1066885&highlight=MIUI
3. Flash back to stock, if you don't know how- http://www.mediafire.com/?0w2y31maz8mdom4
4. BACKUP EFS FOLDER ONTO SD CARD OR SOMEWHERE ELSE!
5. Flash MIUI/CM7 in recovery, reboot, let it boot ALL THE WAY UP.
6. Reboot into recovery, go to mounts and storages, format system and data and datadata and cache.
7. Flash GalaxySense.zip and enjoy!
Interested
Sent from my I897 using XDA Premium App
Download?
Download will be up in about 1 hour, sorry for the sucky upload speed!
Already is a kernel by escapist for this rom but if I remember correctly its outdated. I've run this rom and its a great start for sense.
task650 said:
Already is a kernel by escapist for this rom but if I remember correctly its outdated. I've run this rom and its a great start for sense.
Click to expand...
Click to collapse
I couldn't get it to boot with that kernel, I know which one you're talking about. Any help?
Instructions
The new instructions are in the OP
Pictures or it didn't. Happened
Sent from my I897 using XDA Premium App
Im on it right now! Just a sec
Sent from my GT-I9000 using XDA Premium App
Has anybody tried this out?
Sent from my GT-I9000 using XDA Premium App
Any screenshots ? and i think there is a kernel but outdated.
abteer said:
Has anybody tried this out?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I'm running it right now!
Sent from my GT-I9000 using XDA Premium App
LOSTLOGIC89 said:
Any screenshots ? and i think there is a kernel but outdated.
Click to expand...
Click to collapse
I will get those up soon!
Sent from my GT-I9000 using XDA Premium App
b-eock: I just want to get some clarification on the installation process. I believe the installation process for getting to MIUI changed a while ago where you no longer need to flash the cm7-initial kernel, efs backup, etc. You just have to be on 2.1/2.2 bootloaders and have CWM installed then flash the MIUI zip (someone please correct me if I'm wrong).
Would this process not be the same for GalaxySense or am I missing something?
Escape311 said:
b-eock: I just want to get some clarification on the installation process. I believe the installation process for getting to MIUI changed a while ago where you no longer need to flash the cm7-initial kernel, efs backup, etc. You just have to be on 2.1/2.2 bootloaders and have CWM installed then flash the MIUI zip (someone please correct me if I'm wrong).
Would this process not be the same for GalaxySense or am I missing something?
Click to expand...
Click to collapse
Well you need the kernel, and you have to back up your EFS, YOU WILL LOOSE IT IF YOU DONT!
Sent from my GT-I9000 using XDA Premium App
Escape311 said:
b-eock: I just want to get some clarification on the installation process. I believe the installation process for getting to MIUI changed a while ago where you no longer need to flash the cm7-initial kernel, efs backup, etc. You just have to be on 2.1/2.2 bootloaders and have CWM installed then flash the MIUI zip (someone please correct me if I'm wrong).
Would this process not be the same for GalaxySense or am I missing something?
Click to expand...
Click to collapse
So just do it the way stated, or you could mess it up, and rememeber THE DEVS AND MYSELF ARE NOT RESPONSIBLE!!!
Sent from my GT-I9000 using XDA Premium App
Sent from my GT-I9000 using XDA Premium App
It wont let me upload high res pics from the mobile app....
Sent from my GT-I9000 using XDA Premium App
b-eock said:
Well you need the kernel, and you have to back up your EFS, YOU WILL LOOSE IT IF YOU DONT!
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Which kernel? When you flash MIUI, it includes it's own kernel correct? So would it be the MIUI stock kernel that you need?
And about backing up EFS, if MIUI no longer requires that step, as in it does this as part of the flash process now, why is it necessary to do it before flashing MIUI? Just trying to get clarification. Seems kind of strange to me.
This states using the new CM7/MIUI flashing procedures as well.
I will try this in the night!
chibixzero said:
Pictures or it didn't. Happened
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
GalaxySense has existed since April for the Galaxy S i9000 (http://forum.xda-developers.com/showthread.php?t=1044637). This is simply a port to run it on the Captivate (which has also existed since April or May by following the Escapists instructions).
Projects like this is why an AOSP based kernel is so important. AOSP removes all of Samsung's proprietary issues and allows any other ROM that has been ported to AOSP to be ported to the Captivate. CyanogenMod, MIUI, and GalaxySense are all using the same sources to build from..
im using IceCreamBread-Apocalypse_v.4.5 and i cannot change to other rom..... whenever i try to flash its shows installation complete but still the same rom
Kernel issues
Flash bCk to stock rom first
Sent from my GT-S5360 using xda premium
Just Flash Stock ROM Then Use Other ROM..........
Find All Stock ROM Here...
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
common mistakes..forget to mount system before flash the rom. Have you did it?
kurotsugi said:
common mistakes..forget to mount system before flash the rom. Have you did it?
Click to expand...
Click to collapse
does this work even if on custom kernel? i tried restoring before after i had bootloop using merruk's kernel..but the same thing happens.
we dont have any method to backup/restore kernel. savies cwm works fine but merruks sometimes failed to flash a zip file. if you have problem with merruk, the only way to revive your system is via odin.
kurotsugi said:
we dont have any method to backup/restore kernel. savies cwm works fine but merruks sometimes failed to flash a zip file. if you have problem with merruk, the only way to revive your system is via odin.
Click to expand...
Click to collapse
well said i sir..off the topic, sir does your build kernel works on CREED's ROM v.2? i was kinda hesitant to flash custom kernel after encountering boot loops several times with merruk's kernel..
flash stock rom
manoranjan2050 said:
Just Flash Stock ROM Then Use Other ROM..........
Find All Stock ROM Here...
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Click to expand...
Click to collapse
how to flash stock rom..show I flash with Clockwordmod..?or how plzz sugeest.
manoranjan2050 said:
Just Flash Stock ROM Then Use Other ROM..........
Find All Stock ROM Here...
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Click to expand...
Click to collapse
nileshpandey84 said:
how to flash stock rom..show I flash with Clockwordmod..?or how plzz sugeest.
Click to expand...
Click to collapse
Just use ODIN to flash Stock firmware. Navigate to the link and follow the guides therein posted above by manoranjan,,
yup..sure. Many user have been using it with creed. My kernel is designed to be compatible with most rom except cm.
Thanks guys..... now i can use any rom
I had the same problem here!
I use cwm too it's difficult but you need to download the stock firmware and you need to connect your mobile to your computer (download mode) it will recognize your divide find the files.from the firmware maps and click start and you have your stock rom back
Sent from my GT-S5360 using xda premium
Format /system and mount it. Install ROM.
Hit thanks If my post helped you
I'm one of those who have been using Creed and successfully updated my Rom to NXT2ICSv2: Jelly Blast. Now my question is, would it be possible to just put Cynogemod 10 over or I must start from scratch?
Sent from my GT-S5360 using xda premium
poran123 said:
im using IceCreamBread-Apocalypse_v.4.5 and i cannot change to other rom..... whenever i try to flash its shows installation complete but still the same rom
Click to expand...
Click to collapse
First install another kernel then try to install another rom.. Hope it will work..
Sent from my GT-S5360 using xda premium
Can anyone help with my earlier asked question plz.
Sent from my GT-S5360 using xda premium
kurtzo1 said:
I'm one of those who have been using Creed and successfully updated my Rom to NXT2ICSv2: Jelly Blast. Now my question is, would it be possible to just put Cynogemod 10 over or I must start from scratch?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
If cm10 rom contains a kernel then u can put cm10 over.
Sent from my GT-S5360 using xda premium
Do u have or know of a cm10 Tom that's got a kernel maybe that I can download
Sent from my GT-S5360 using xda premium
Still waiting up on cm 10 with kernel please mein. A link.
Sent from my GT-S5360 using xda premium
Hi Guys..those out there don't want to go through the process of downloading and flashing the Odin file can download this zip and flash in CWM.
*It is a Nandroid Backup of my installation
It is already rooted.
AP : I9300XXDLH8
CP : I9300XXDLH8
Requirements
ClockworkMod Recovery
Steps to be performed
Download the zip file
Place it in your extsdcard
Go into CWM recovery
*most important: Backup your current ROM
choose > Install .zip from SDcard
Choose > Choose zip from extSdcard
Flash and enjoy
Don't forget to clear data, cache and dalvik before you do this. If you face any problems do a factory reset.
Download
I9300XXDLH8
Google Drive Link
*Mirror*
*Remove all spaces from the file name
I9300XXDLH7
Google Drive Link
Torrent File
*Mirror*
Please post if you face any problems :good:
Credits: Samsung-updates.com, Sammobile.com, chainfire, Mskip
Did your wifi work ok
Sent from my GT-I9300 using xda premium
s3lover said:
Did your wifi work ok
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yup..100%
So if it didn't work for me will installing yours work
Sent from my GT-I9300 using xda premium
s3lover said:
So if it didn't work for me will installing yours work
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I cant say for sure..but there is not harm in trying..backup your current rom and flash..
I have done that just waiting for download to finish
Sent from my GT-I9300 using xda premium
Why touch recovery requires??
Working here, just flashed it, everything ok so far. Thank you!
kachrukamble said:
Why touch recovery requires??
Click to expand...
Click to collapse
It's not.
kachrukamble said:
Why touch recovery requires??
Click to expand...
Click to collapse
Because I use Touch recovery..it will not work on the other recoveries...
flash the recovery via Odin and Flash the ROM..
then you can flash back the other recovery on the top of it to have your backups..
[Edit] try it on your current recovery once..I think it will work as it uses Edify scripts..do let me know so that I can edit the OP
albireox said:
Working here, just flashed it, everything ok so far. Thank you!
Click to expand...
Click to collapse
u r welcome mate..
bricky23 said:
It's not.
Click to expand...
Click to collapse
is it working on CWM recovery (non touch version) as well??
I have not tried it..so can say..
[Edit] silly me..now come to think of it..it will work as it user edify scripts..
Do I need to un zip the file first
Sent from my GT-I9300 using xda premium
s3lover said:
Do I need to un zip the file first
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
no flash it as you flash any custom rom..
Didn't use touch recovery and installed straight on top of omega 15. No wipe...
Bookmarks crashes the browser tho
Sent from my GT-I9300 using xda app-developers app
kobz1973 said:
Didn't use touch recovery and installed straight on top if omega 15. No wipe...
Bookmarks crashes the browser tho
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for informing..will change the OP
Bookmarks crash is a know bug in this version..
No good wifi don't work back to stock I go
Sent from my GT-I9300 using xda premium
s3lover said:
No good wifi don't work back to stock I go
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Why dont you try flashing a stock firmware via Odin first without bootloader checked and second time with bootloader option checked..then flash any other ROM..it is know to cure Wifi problems when moving with leaked JB ROMS..
WiFi is working just fine here
Sent from my GT-I9300 using xda app-developers app
Status bar is now gray
Sent from my GT-I9300 using Tapatalk 2
Hi There I've Rooted My Device And Install JellyBlast V2 i Didn't Like it So Much So I Removed it And Installed My Stock ROM Again Via Odin But When i Saw V3 I've Download it But When I Try To Install Bring Me That Error
finding rom.zip...
opening rom.zip...
E: can't open /sdcard/JellyblastV3.zip(bad)
installation aborted.
Tried Another Roms Same Error Tried A 3 Different SD Cards And I've Got Same Error
Can You Please Help Me Fix This i Really Want To Install That ROM
Thanks.
try to download the rom again
Sent from my GT-S5360 using xda premium
What ru using stock recovery if so use CWM if you are in fact using CWM try another version
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
denysw0w said:
try to download the rom again
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
im Downloading Now Same Mod From Another Site i'll Test And Reply
But I Tried Different Mods And Same Work
_____________________________________
iDuc said:
im Downloading Now Same Mod From Another Site i'll Test And Reply
But I Tried Different Mods And Same Work
_____________________________________
Click to expand...
Click to collapse
try madteam's cwm
Sent from my GT-S5360 using xda premium
denysw0w said:
try madteam's cwm
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
madteam's CWM Dosent Support My Device But i Have CWM V5 And i Tried it And Gave Me Same Results i've Downloaded The Rom From Another Mirror i'll Try And Reply
iDuc said:
madteam's CWM Dosent Support My Device But i Have CWM V5 And i Tried it And Gave Me Same Results i've Downloaded The Rom From Another Mirror i'll Try And Reply
Click to expand...
Click to collapse
madteam cwm is working fine on my phone
Sent from my GT-S5360 using xda premium
Try this
CWM skin
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
denysw0w said:
madteam cwm is working fine on my phone
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Look Something Happend Now i Down Understand I've Downloaded Jellyblast 3 From Another Site But Not From XDA Original Theard Cuz That Didn't Work And installed it From CWM it Installed But The Weird Here it Dosent Changed The ROM Its Still The Original i Dont Know Whats Wrong Here From The ROM I've Just Downloaded And Flashed it Or From The Original Rom
iDuc said:
Look Something Happend Now i Down Understand I've Downloaded Jellyblast 3 From Another Site But Not From XDA Original Theard Cuz That Didn't Work And installed it From CWM it Installed But The Weird Here it Dosent Changed The ROM Its Still The Original i Dont Know Whats Wrong Here From The ROM I've Just Downloaded And Flashed it Or From The Original Rom
Click to expand...
Click to collapse
did you mount system before flashing ? also, what kernel are you using ?
Sent from my GT-S5360 using xda premium
denysw0w said:
did you mount system before flashing ? also, what kernel are you using ?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
What U Mean With Mounting System? And How To Do it
i Use Stock Android 2.3.6
Kernel
[email protected]#1
Build
GINGERBREAD.JPLA1
i Passed To CWM
And Choosed
Mounts And Storage Menu
And Thats What i Got
Mount/data
mount/SD Card
unmount/System
Unmount/Cache
so system is mounted, try to flash stock rom first and after that flash jbv3
Sent from my GT-S5360 using xda premium
denysw0w said:
so system is mounted, try to flash stock rom first and after that flash jbv3
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
i Have The Stock Rom.zip But When I Try To Flash With CWM Tell Me Install Aborted i Can Only Fla**** With Odin
But I've Already Installed The Stock ROM After Removing JBV2 AND
Hey I Found Something The JBV3 That i Downloaded From XDA Tryed To Extract it With Win Rar Gave Me 2 Files Are Corrupt But The Extract Dosent Aborted it Continue To The End
See The Photo
is That Why I Got "BAD" Error At first Place ?
iDuc said:
i Have The Stock Rom.zip But When I Try To Flash With CWM Tell Me Install Aborted i Can Only Fla**** With Odin
But I've Already Installed The Stock ROM After Removing JBV2 AND
Hey I Found Something The JBV3 That i Downloaded From XDA Tryed To Extract it With Win Rar Gave Me 2 Files Are Corrupt But The Extract Dosent Aborted it Continue To The End
See The Photo
is That Why I Got "BAD" Error At first Place ?
Click to expand...
Click to collapse
maybe, so after you are on stock rom, go to temporary madteam cwm, install jelly blast v3 ( btw, download it from the official thread ) and after that wipe data, cache and dalvik cache ( in advanced section cwm) then choose reboot system now and wait 5-10 minutes to boot up properly
Sent from my GT-S5360 using xda premium
denysw0w said:
maybe, so after you are on stock rom, go to temporary madteam cwm, install jelly blast v3 ( btw, download it from the official thread ) and after that wipe data, cache and dalvik cache ( in advanced section cwm) then choose reboot system now and wait 5-10 minutes to boot up properly
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
okay i'll Try And Reply Thanks
here is my cwm : http://db.tt/aFE7VAAl
Don't forget to press thanks
Thnaks Body I've Got it All Worked But Theres A Problem I't Dosent Support Arabic Can You Help Me
i think it was in development a pack with arabic language
Don't forget to PRESS Thanks
This post was sent from my awesome Y using w0w engine
Yeah Yeah I've Fixed it Thanks For Your Help Buddy
Hi,
What is the correct method to upgrade Cyanogenmod ROM on Nexus 4 ? Do I need to install the new build from scratch or there is some other way also, which can save me from backup/restore process.
Param
kalerparamvir said:
Hi,
What is the correct method to upgrade Cyanogenmod ROM on Nexus 4 ? Do I need to install the new build from scratch or there is some other way also, which can save me from backup/restore process.
Param
Click to expand...
Click to collapse
Dirty flash is ok. No you dont need to wipe anything, just flash it on top of your current rom.
Sent from my Nexus 4 using Tapatalk 2
Just download cyandelta. Easiest way to flash cm nighties!! Instead of download the whole rom package, cyandelta just downloads the updated files. It's much faster!!
Try it!!
Sent from my Nexus 4 using xda app-developers app
S.H.A.D.E said:
Just download cyandelta. Easiest way to flash cm nighties!! Instead of download the whole rom package, cyandelta just downloads the updated files. It's much faster!!
Try it!!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the answer. Cyandelta did the trick for me.
kalerparamvir said:
Hi,
What is the correct method to upgrade Cyanogenmod ROM on Nexus 4 ? Do I need to install the new build from scratch or there is some other way also, which can save me from backup/restore process.
Param
Click to expand...
Click to collapse
You can update from the CM rom itself in developer options. Even sets the time cycle you wish
About phone
cyanogen mode updates download the rom and flash via CWM or TWRP easy as it gets :silly: