SOLVED[ROM PORTING][CM10] Wifi Not working, setting says "Turning Wifi on" for always - Networking

SOLVED[ROM PORTING][CM10] Wifi Not working, setting says "Turning Wifi on" for always
Hi
I am trying to port CM10 for a low cost device Samsung Galaxy Trend S7392. I am trying to bring up wifi but no success. The Wifi Setting Screen always show Turning Wifi On.
To debug I tried to run wpa_supplicant manually and found that it is working fine. Here is what I did:
1) Run wpa_supplicant manually : wpa_supplicant -Dnl80211 -iwlan0 -c/data/misc/wifi/wpa_supplicant.conf -e/data/misc/wifi/entropy.bin -dd &
2) Run wpa_cli : wpa_cli -p /data/misc/wifi/wlan0
>scan
>scan_results
I get a list of WIFI APs available around me. But I am unable to turn on WiFi on my phone anyhow.
Any help will be highly appreciated. Please find attached logcat for more reference.

ediequeen said:
There would be many reasons if you couldn't start wifi software well.Here are some tips,hope it would help
1,check if your computer wireless network adapter is activated,if not,open it.
2,uninstall the physical adapter and then ” Scan for hardware changes ” for several times.It would need a few minutes to scan the hardwares, and then system will install the new wireless network card automatically.
3,share the network connection manually.
Click to expand...
Click to collapse
Read the post carefully before posting anything. I am NOT talking about PC.

Please give me the link for cm10.1. I use a GT-S7392 since 4 months and i want a custom rom for it. So please please give me the link for cm10.1
Sent from my GT-S7392 using XDA Premium 4 mobile app

One more question. Is it cm10 or 10.1
Sent from my GT-S7392 using XDA Premium 4 mobile app

Try installing a stable build. Not all CyanogenMod ROMs are compatible with the hardware of the device. Sometimes Bluetooth or GPS doesn't work for me.
Sent from my SGH-I897

trivalent said:
Hi
I am trying to port CM10 for a low cost device Samsung Galaxy Trend S7392. I am trying to bring up wifi but no success. The Wifi Setting Screen always show Turning Wifi On.
To debug I tried to run wpa_supplicant manually and found that it is working fine. Here is what I did:
1) Run wpa_supplicant manually : wpa_supplicant -Dnl80211 -iwlan0 -c/data/misc/wifi/wpa_supplicant.conf -e/data/misc/wifi/entropy.bin -dd &
2) Run wpa_cli : wpa_cli -p /data/misc/wifi/wlan0
>scan
>scan_results
I get a list of WIFI APs available around me. But I am unable to turn on WiFi on my phone anyhow.
Any help will be highly appreciated. Please find attached logcat for more reference.
Click to expand...
Click to collapse
Did you have any kind of success? I would love to test CM10 on S7392!

NunoFilipeSantos said:
Did you have any kind of success? I would love to test CM10 on S7392!
Click to expand...
Click to collapse
Yes! I got it working on my S7392. However, I haven't released the ROM yet. If u want you ca compile the ROM youself. Sources are at https://github.com/trivalent/dev

trivalent said:
Yes! I got it working on my S7392. However, I haven't released the ROM yet. If u want you ca compile the ROM youself. Sources are at https://github.com/trivalent/dev
Click to expand...
Click to collapse
What are the main functionalities that are not working? Does the dual SIM work properly?

Why you are not releasing the ROM

Can someone help this guy? Please someone compile the rom and give an link to us for testing and reporting bugs
If we will work together, we will bring an custom ROM for our device. And if we will bring an custom rom, we will can port other roms for our device

Andrei Radu said:
Can someone help this guy? Please someone compile the rom and give an link to us for testing and reporting bugs
If we will work together, we will bring an custom ROM for our device. And if we will bring an custom rom, we will can port other roms for our device
Click to expand...
Click to collapse
Read above replies he got success but he haven't released it

Related

AD-HOC WiFi on Nexus One!

Hello, when I was on CyanogenMod 5.0.7.1 I was able to connect to my Ad-Hoc WiFi connection just fine. I am now on CyanogenMod 6.0.0-N1-RC1 and I can not figure out how to get this to work. Does anyone have any suggestions or idea's on how to make this work? I have tried to edit the wpa_supplicant.conf file and change the ap_scan line to ap_scan=2 and that still does not work.
Really? i thought it wasn't possible, well at least from the stock rom it isn't.
It used to work with CyanogenMod 5.0.7.1 but not on the latest. I'm hoping for a fix so I don't have to downgrade.CyanogenMod 5.0.7.1
me too
I need this feature very much. please post your experiences here if u have any luck in doing this. i heve cmod 6.0 RC1 too.
IsmailBhai said:
try this
(url deleted)
Click to expand...
Click to collapse
Once your phone is rebooted, we will download the HydTech’s adhoc wifi app from the market and run it.(app costs only $1.99)
Enjoy your new adhoc connection!
Spam. Reported.
use connectify it make the signal readable to your phone

i815 CyanogenMod 9 - can't connect WiFi

After fail with ICS (Austrian firmware) i have installed [I815/P6800/P6810] CyanogenMod 9 (7/19/2012) (from http://forum.xda-developers.com/showthread.php?t=1542911).
It looks and work great. Except that I can't connect to WiFi. My device detects two WiFi networks but it wont connect.
How to solve that?
MileH said:
After fail with ICS (Austrian firmware) i have installed [I815/P6800/P6810] CyanogenMod 9 (7/19/2012) (from http://forum.xda-developers.com/showthread.php?t=1542911).
It looks and work great. Except that I can't connect to WiFi. My device detects two WiFi networks but it wont connect.
How to solve that?
Click to expand...
Click to collapse
Did you try this.
http://forum.xda-developers.com/showpost.php?p=28820672&postcount=730
esoh said:
Did you try this.
http://forum.xda-developers.com/showpost.php?p=28820672&postcount=730
Click to expand...
Click to collapse
I'm new in all this "rooting"/"flashing"/etc so I'm going step by step. I tried the link above and proud to say it - I made id btw Wifi is working now!
CM9 on i815 is great!
MileH said:
I'm new in all this "rooting"/"flashing"/etc so I'm going step by step. I tried the link above and proud to say it - I made id btw Wifi is working now!
CM9 on i815 is great!
Click to expand...
Click to collapse
Good job. We are all new to rooting/flashing at some point but once we dive in, it's impossible to go back.

[How To] Fix Wifi Problems in Aurora

Okay, I been using Wifi a lot lately, and as other people.. in Aurora I been facing Wifi getting "stuck" it just grays out.. and there won't be an actual connection... so, I did research and I installed WiFix Manager
Simple Instructions
Download and install application - WiFix Manager
Give root permission
Click Advanced Configurations and enter your country code (instead of US) - Find your code here or here
Click Change Country Code
Click Check For Updates
Click Install WiFix
Restart phone and you are done
I been testing this for 3 days, I left wifi on for hours and even overnight. Before when I wake up in the morning it would always be greyed out.. now it's always nice blue reception! Let me know if this fixes it for you and if it does and we get positive feedback maybe we can convince dzo to implement this fix into his ROM.
FYI, I am using 4.1a, but I don't see why it would not work in later versions.
Wifix
I get way higher speeds in Aurora ICS 5.0 when using this app, it reminds me of the difference when i installed an Elora wifi-fix on an earlier version of Aurora.
My main problem in 5.0 is the touch screen problems, even after dzo's updates.
have you tried to replace the 1 wifi conf file for an older version?
I know that this fixed some wifi issues for many people including me. I can't remember the file name but it can be found in one the aurora thread in this section, I think.
I you want to try I can look further
Djuganight said:
have you tried to replace the 1 wifi conf file for an older version?
I know that this fixed some wifi issues for many people including me. I can't remember the file name but it can be found in one the aurora thread in this section, I think.
I you want to try I can look further
Click to expand...
Click to collapse
I think this might be the one (refered to in Dzo's Aurora ICS for u8800 - General Discussion thread), but it has some issues. Disconnect and 3g doesn't turn on auto while out of range. If you have other tips, please tell.
http://forum.xda-developers.com/showpost.php?p=26478868&postcount=5597
orsjeb said:
I think this might be the one (refered to in Dzo's Aurora ICS for u8800 - General Discussion thread), but it has some issues. Disconnect and 3g doesn't turn on auto while out of range. If you have other tips, please tell.
http://forum.xda-developers.com/showpost.php?p=26478868&postcount=5597
Click to expand...
Click to collapse
yes thats the one m8.
for me worked like a charm when I couldn't get wifi in some roms.
unfortunately, it doesn't work for me. i have to go back to GB instead of ICS
thanks a lot, I will try it!
Latest Aurora
RDRD_CN said:
thanks a lot, I will try it!
Click to expand...
Click to collapse
By the way, wifi works perfect now without any app only the latest version of dzo's ICS ver5 update 9,

[ROM][DEV] CyanogenMod 9 Beta | Paranandroid v1.5a | 01.06.2013

Hi Everyone,
I released my own fully open source ROM,CyanogenMod 9 for Huawei Ideos X5. It's an alpha version,so it isn't ready for daily use.
Issues: (both on CM9 and PA)
- WiFi MAC adress is 00:11:22:33:44
- The UI works bugly. You'll experience.
- USB and WiFi Tether doesn't working. You can use applications from Google Play
- USB Mass Storage is slower than other ROMs.
Note:
Please don't say like "Why did you release before finish it?" or "When will you finish it?". I released it for bugtracking and bug fixing by developers. I stuck on those issues so I released my ROM.
Download Link:
https://code.google.com/p/forumber-projects-for-u8800/downloads/list
All source available on my github:
https://github.com/forumber
Thanks to:
Blefish --- for device source,and helps
dzo --- for the first ICS ROM of U8800
CodeAurora
Thanks a lot! :good:
:silly:downloading. I'll test and give feedback.
edit----
needs a file manager - just to make it easier to install apps like catlog etc
I extracted .zip, added a File manager rezipped and reinstalled
still testing - ROM itself is snappy.
will post logs after more testing
bugs are as stated by DEV
I''ll try it as soon as I can!
Thanks for your efforts
Sent from my U8800 using xda app-developers app
Djuganight said:
Honestly althought I respect the initiative it should be already forbiden open new threads with roms where almost nothing, or the most important things, don't work.
We have enugh of that here already :good:
Click to expand...
Click to collapse
The OP didn't make this thread to get told about this. He made this thread to get help from other developers to fix this ROM.
after some testing I've went back to my daily ROM
so I could send and receive texts and make phone calls
I was able to pair, send and receive pictures via bluetooth (tested with nokia c3) - errors showing on logcat
attached log
looking forward to updates, thanks DEV
Anyways, I have high hopes for this developer. And I hope he doesn't let us down.
Now please cooperate with him and give him some help in fixing the rom.
meer_mortal said:
after some testing I've went back to my daily ROM
so I could send and receive texts and make phone calls
I was able to pair, send and receive pictures via bluetooth (tested with nokia c3) - errors showing on logcat
attached log
looking forward to updates, thanks DEV
Click to expand...
Click to collapse
Thank you very much for tests.
Could you use GPS? I saw it on your logcat.
I won't stop developing this ROM. I'm developing it since February and I'm trying to fix Wifi & BT since March.
This thread is opened for get helps from other developers & get test reports by testers (like meer_mortal).
Thanks for your interest.
GPS couldn't get a fix.
I'll reinstall rom and run some GPS tests and post log
Sent from my U8800 using xda premium
Can´t get my SIM card to load.
Im with finnish Saunalahti SIM card so the problem seems to be the same as Auroras.
I have no APN:s
Tried the Aurora fix.
su
setprop persist.opl.enabled 0
setprop persist.pnn.enabled 0
setprop persist.eons.enabled 0
But did not work.
Btw. This and Blefish work are the best things that are happening to our device.
Thank you for all your hard work.
tested GPS.
set location with fasterGPS
tried to get a fix with *
google maps - fail
sygic-fail
google skymaps - fail
also found new bug
usb storage doesn't work
-
meer_mortal said:
the comment voids itself due to the fact it is posted on forumber thread.
if you would like to post about lack of finished roms keep it to the general section.
sorry for off topic
anyways back "on topic"
tested GPS.
set location with fasterGPS
tried to get a fix with *
google maps - fail
sygic-fail
google skymaps - fail
also found new bug
usb storage doesn't work
-
Click to expand...
Click to collapse
Thanks for testing.
USB Storage working,you need configure it. Options > Stoarge > (Menu Button) > USB Storage Settings > Choose "Mass Storage"
forumber2 said:
Thanks for testing.
USB Storage working,you need configure it. Options > Stoarge > (Menu Button) > USB Storage Settings > Choose "Mass Storage"
Click to expand...
Click to collapse
I think you should enable that by default in the rom.
So forumber, what stage is this project up to?
rqmok said:
So forumber, what stage is this project up to?
Click to expand...
Click to collapse
I'm still on it. I'am trying,trying and trying again but I didn't get succesfull thing yet. My school will close in 1 month. I think I can complete it in June.
forumber2 said:
I'm still on it. I'am trying,trying and trying again but I didn't get succesfull thing yet. My school will close in 1 month. I think I can complete it in June.
Click to expand...
Click to collapse
Well, at least your ROM boots up (mine is still not booting ). Good Luck with that CM9. I hope you finish it!
forumber2 said:
I'm still on it. I'am trying,trying and trying again but I didn't get succesfull thing yet. My school will close in 1 month. I think I can complete it in June.
Click to expand...
Click to collapse
:thumbup:
We're waiting for you Sir Forumber2
Gesendet von meinem u8800pro mit XDA-Developers app
prakharkmr27 said:
We're waiting for you Sir Forumber2
Gesendet von meinem u8800pro mit XDA-Developers app
Click to expand...
Click to collapse
I know,
I fixed WiFi. When I fixed the GPS,I'll release it
forumber2 said:
I know,
I fixed WiFi. When I fixed the GPS,I'll release it
Click to expand...
Click to collapse
Any thoughts on making this for the pro?

Bcmon,RFA

Hi
I have seen this hacking app called "Reaver" and i had to install "Bcmon" for this to work but i cannot get bcmon up and working it either force closes or it says device not supported, as i tried hacking my own WiFi which my bro change the password and he doesn't want to give the code, so i tried hacking because wifi is my life i cant live without her , anyways so i am asking if there is anyway to make this broadcom wifi chipset work? Anyway at all? If you can mod please do
Thanks alot in advance
Sent from my LG-D682 using XDA Premium 4 mobile app
Bcmon is very finicky when it comes to what it will work with. I suggest checking out their dev page for a better idea of the requirements. Unless you have the ability to code your own driver for mon, it's not likely to find support. For penn testing You can go the linux deploy route, that coupled with a usb otg cable and a wifi card that works with the Bully\aircrack suite (I think that's what reaver needs ).
Sent from my SGH-I927 using XDA Free mobile app
first you need a compatible device
Hi first u need a compatible device to hack a WPA wpa2 WiFi or let it be wep
First u need to get a mobile having 4329, or4330 WiFi chipset I refer u HTC nexus one which is rare mobile having 0.5 % popularity or galaxy gs2 then if u got n1 install cm9 on it (cm10 on gs2) and then I hope u'r bcmon will work once it'll work then u can use either RFA or air crack GUI thanks ...
Im trying to make Reaver for Android work on my device due its not compatible with bcmon, im using custom scripts.
Im getting the following error:
CANNOT LINK EXECUTABLE: library "libpcap.so.1" not found
Due that, i used the following solution command:
export
LD_LIBRARY_PATH=/path/to/your/dir:$LD_LIBRARY_PATH
Obvious /path/to/your/dir is an example, mine is /sdcard/Download/libpcap.so.1
But im not getting success... i continue getting the error... Please somebody help
Sent from my Samsung SM-J510FN using XDA Labs
TheWalkingSans said:
Im trying to make Reaver for Android work on my device due its not compatible with bcmon, im using custom scripts.
Im getting the following error:
CANNOT LINK EXECUTABLE: library "libpcap.so.1" not found
Due that, i used the following solution command:
export
LD_LIBRARY_PATH=/path/to/your/dir:$LD_LIBRARY_PATH
Obvious /path/to/your/dir is an example, mine is /sdcard/Download/libpcap.so.1
But im not getting success... i continue getting the error... Please somebody help
Sent from my Samsung SM-J510FN using XDA Labs
Click to expand...
Click to collapse
same problem
- Official.Caserol23 @ Facebook
- Caserol23 @ XDA
- Caserol23 @ Twitter
It only works with broadcom chips.
sent from IT Heaven

Categories

Resources