Related
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
do you have tried to start and hold volume button... than connect to usb and simply install a stock rom (for example from your provider) - this must work... if not - you have bigger problem.
muhanad said:
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
Click to expand...
Click to collapse
Answered so many times. turn your phone off then turn it on "while holding volume down.It will then take to bootloader(rainbow screen).It suppose to have a cotulla written above the rainbow screen.Now flash it with a stock rom came from HTC site..No need to sync your phone to your PC..Just flash it..Start all over again..Now you can search before doing somehing with your phone.If that didn't help you. You have a bigger problem..
Yes I tried this also but it doesn't work.
What didn't work? Can you boot into bootloader - ie switch off, press and hold vol down button and switch phone on.
You should then boot into a multi-coloured screen and should see "serial" at the bottom of the screen.Then connect device to usb port (preferably one at back of your pc and a different one that you haven't used before if possible) - let the drivers install if applicable - does "serial" change to "usb"?
Do wat d above posters have suggested then try different usb ports or even a different windows pc...For all we know, your usb cable might be faulty....Also did u perform HARDSPL before anything else?
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
try plugging the phone into a different USB port it should work then...
Tried that all day and it said couldn't install drivers, then just tried the same ports now and its worked. I think it was mobile device center had 2 set-ups for my phone, i deleted the older one and all seems fine now.
This is crazy, now i'm stuck on magldr and won't find usb.
I'm leaving nand now cos i'm close to smashing my phone to pieces, magldr usb flasher will not find the connection no matter what i try, so i'm staying with ****ty windows mobile. Not happy but i've been trying for days now.
Smoke74 said:
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
Click to expand...
Click to collapse
I am experiencing this exact same problem. Bootloader wont recognize the USB stays in SERIAL. Tried different ports, cord is fine. What is the problem.
Before this, my HTC HD2 would just hard reset on its own ONCE A DAY! Why was it doing this?
Now it gets stuck on the white HTC loading screen. Wont get passed it. I used to be able to hard reset by doing the volume keys down and reset but NOPE... still wont load past that white screen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
h.nocturna said:
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
Click to expand...
Click to collapse
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
taha23 said:
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
Click to expand...
Click to collapse
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
h.nocturna said:
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
Click to expand...
Click to collapse
Ok... i rebooted into Normal mode, downloaded the utility, did a search for "HTC" found nothing, did a search for "HD" found nothing. So i am now installing windows mobile center for windows 7 which should have the appropriate drivers.
Install Windows mobile device center 6.1, problem solved.
Sent from my HTC HD2 using XDA Premium App
I'm able to view through USBDeview that my HD2 is connected, however I'm unable to view/open it.. I screwed up by naming the 'temp' folder to 'copy_to_sd_root'..
The instructions confused me. I figured this was the folder that needed to be copied to the sd root... however when i rebooted the phone, I was unable to access it. Any recommendations?
SOLVED
I was overlooking the USB Flash option.
If you are still having problems, let your phone turn on(no multi-color screen), select: USB Flash, click the DAF.exe installation file, follow the prompts.
You're done.
I had this problem and I solved it disabling an option in activesync. I can't remember what was exactly the checkbox, but was in "options" and it said something like "allow usb connections" or something like this.
I just disabled it and rebooted the device holding volume down.
Good luck!
Make Sure Phone is not connected to PC
Goto cotrol panel in windows
Uninstall HTC BMP USB Driver
Uninstall HTC Driver Installer
Uninstall HTC Sync
Unisntall Windows Mobile Device Center
Restart the PC
start the phone holding power and vol dn and now connect the phone to PC. should detect and install the drivers and you should be able to see USB on phone screen.
if this does not work
Delete all the USB root HUB but keep as last option in device manager.
PS: This will cause ALL the USB devices to redetect.
Let me know if this works
Hey guys, for some reason I'm unable to perform a Task29 or flash anything from MAGLDR 1.13's USB flasher mode.
Here's what happened.
I was using CMYLXGO's stock Desire HD ROM and having data problems, so I tried to change my kernel to Tytung's using CWM. After I did that, Android stopped booting - kernel load fail. I don't know how to fix that, so I figured I'd just do a clean install.
When I tried to do a Task29 from the 3 color screen, I get stuck at "Verifying information from your PDA phone..." It then tells me it can't establish a USB connection. I ran the program as administrator.
Okay, I said to myself, I'll try reflashing CWM from MAGLDR's USB Flasher. I got "Wait USB... USB." and tried, but DAF.exe also told me it couldn't establish a USB connection.
I know the USB connection is working, because I've tried it with two different cords and reformatted the SD card through MAGLDR's USB mass storage mode, which still works.
Can anybody help me out? Currently I can't boot android, don't have windows mobile and am f**ked...
Thanks,
Zuka
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
zukа said:
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
Click to expand...
Click to collapse
Yes WMDC and ActiveSync have the USB drivers for your HD2 will it is in bootloader, hence no connection via USB as you have no USB drivers for bootloader. Glad you figured your problem out and posted it back here for others to see. Too bad I did not see your threadcearlier as I may have been able to say you a little stress.
Haha, I appreciate it, but when I tried it on my housemate's computer and I saw "Windows Mobile Device Centre installing..." I knew how I'd messed up. Thanks anyway, hopefully this can serve as a reference thread if anyone googles and comes up short.
Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
SOLUTION
First
marcussmith2626 said:
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
Click to expand...
Click to collapse
And then...
marcussmith2626 said:
if it now shows in the device manager right click on it and update drivers
select the folder which has the samsung usb drivers or manually install them from the list
Click to expand...
Click to collapse
Extra....
marcussmith2626 said:
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
Click to expand...
Click to collapse
Credit : @marcussmith2626
VillaVor said:
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
Click to expand...
Click to collapse
have u installed some app recently after which this problem occour
if not the problem is with the usb port of pc
or the usb port of the phone
abhishekr700 said:
have u installed some app recently after which this problem occour
if not the problem is with the usb port of pc
or the usb port of the phone
Click to expand...
Click to collapse
No...
the proble isnt from usb port of my pc and usb cable too (tested it with another device)
i think my phone's usb port :crying:
any solution ?
VillaVor said:
No...
the proble isnt from usb port of my pc and usb cable too (tested it with another device)
i think my phone's usb port :crying:
any solution ?
Click to expand...
Click to collapse
phone's usb port is a hardware problem
you have to get it replaced at the service centre........
BTW i wouldn't mind if u press that thanks button
abhishekr700 said:
phone's usb port is a hardware problem
you have to get it replaced at the service centre........
BTW i wouldn't mind if u press that thanks button
Click to expand...
Click to collapse
yeah, service center
haha thanks pressed dude
VillaVor said:
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
Click to expand...
Click to collapse
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
marcussmith2626 said:
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
Click to expand...
Click to collapse
As you said i am in windows 8.1 right now, and already tried just a minute ago
that result is my pc always notif me "Usb device not recognized" hell yeah my pc still can read this is a device again :good:
As i said Usb device not recognized and then what should i do ?
Thanks for your experience :fingers-crossed:
VillaVor said:
As you said i am in windows 8.1 right now, and already tried just a minute ago
that result is my pc always notif me "Usb device not recognized" hell yeah my pc still can read this is a device again :good:
As i said Usb device not recognized and then what should i do ?
Thanks for your experience :fingers-crossed:
Click to expand...
Click to collapse
if it now shows in the device manager right click on it and update drivers
select the folder which has the samsung usb drivers or manually install them from the list
Ahh..... ah... ah.... Finally !! after plug it in my other pc (Windows xp) device working like normal again ....
Odin i'm coming !! Cant wait for clean install again
@marcussmith2626 Thanks ....
Really a 'Recognized Contributor' !!
Edit : Ok. trying as you said for this pc sir !!
VillaVor said:
Ahh..... ah... ah.... Finally !! after plug it in my other pc (Windows xp) device working like normal again ....
Odin i'm coming !! Cant wait for clean install again
@marcussmith2626 Thanks ....
Really a 'Recognized Contributor' !!
Edit : Ok. trying as you said for this pc sir !!
Click to expand...
Click to collapse
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
marcussmith2626 said:
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
Click to expand...
Click to collapse
Haha yeah just follow your instructions was surprises me for long time waiting.... one week exactly :silly::silly:
Coincidental that problem due from windows 8.1
Ok. Done edited post #1
VillaVor said:
Haha yeah just follow your instructions was surprises me for long time waiting.... one week exactly :silly::silly:
Coincidental that problem due from windows 8.1
Ok. Done edited post #1
Click to expand...
Click to collapse
it took me months to figure that one out - even microsoft and samsung hadnt got any ideas
its because windows 8.1 has changed the usb stack and requires that all drivers be digitally signed and has an identifer that the bios can read
this means some old usb device didnt work unless they met condition already although new drivers became available for most things but for some reason samsung havent updated their usb drivers in years (May 5, 2011 is last officall release) so im guessing thats why it doesnt fully work in windows 8.1 and im sure the problem is because its not properly signed so the device fails to enumerate unless you do the plugging in another usb device
other old phones work fine like htc and new samsung phones also work fine so its properly just a strange issue with the way the galaxy y handles usb
marcussmith2626 said:
it took me months to figure that one out - even microsoft and samsung hadnt got any ideas
its because windows 8.1 has changed the usb stack and requires that all drivers be digitally signed and has an identifer that the bios can read
this means some old usb device didnt work unless they met condition already although new drivers became available for most things but for some reason samsung havent updated their usb drivers in years (May 5, 2011 is last officall release) so im guessing thats why it doesnt fully work in windows 8.1 and im sure the problem is because its not properly signed so the device fails to enumerate unless you do the plugging in another usb device
other old phones work fine like htc and new samsung phones also work fine so its properly just a strange issue with the way the galaxy y handles usb
Click to expand...
Click to collapse
Classic problem came out again, my galaxy y still unrecognized.
Yes about 2 hours ago i tell you its succes but after that usb never recognized again.
VillaVor said:
Classic problem came out again, my galaxy y still unrecognized.
Yes about 2 hours ago i tell you its succes but after that usb never recognized again.
Click to expand...
Click to collapse
each time you have to repeat the process
unplug phone from computer
plug it back in
plug any other usb dongle in after
marcussmith2626 said:
each time you have to repeat the process
unplug phone from computer
plug it back in
plug any other usb dongle in after
Click to expand...
Click to collapse
Haha as fast as ....
If any other solution please tell me as quick as you know.
Okay, will try tomorrow ...
VillaVor said:
Haha as fast as ....
If any other solution please tell me as quick as you know.
Okay, will try tomorrow ...
Click to expand...
Click to collapse
unfortunatly thats the only solution iv found for windows 8.1 - if you restart the phone or remove the usb cable you have to go through the process again of unplugging cable plugging back in then plugging any other usb dongle in after - its the only way iv found for windows 8.1 to enumerate the device
marcussmith2626 said:
unfortunatly thats the only solution iv found for windows 8.1 - if you restart the phone or remove the usb cable you have to go through the process again of unplugging cable plugging back in then plugging any other usb dongle in after - its the only way iv found for windows 8.1 to enumerate the device
Click to expand...
Click to collapse
Still no luck, it always showed doesnt recognized, even other pc and laptop (Win8.1, Win8, WinXp). I think its hardware problem
VillaVor said:
Still no luck, it always showed doesnt recognized, even other pc and laptop (Win8.1, Win8, WinXp). I think its hardware problem
Click to expand...
Click to collapse
if its not detecting on xp then its damaged
marcussmith2626 said:
if its not detecting on xp then its damaged
Click to expand...
Click to collapse
Oh ya, first time follow your instruction its succes on windows xp, here is scenario (plug my sgy, plug other device which already installed, notif baloon appear as usb not recognized, plug out sgy, plug in on my other pc which installed os windows xp)
Hmm, seems hopeless for this matter
Will ask google for this classic problem or bring it service center.
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Steps Parku said:
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Click to expand...
Click to collapse
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Still Not Helpful.
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Steps Parku said:
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Click to expand...
Click to collapse
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Same Problem...
Steve, did you solve the problem? If yes, how did you solve it?
I have the same problem with my Blu Life Pure XL, which is a similar phone.
Regards,
Ricardo
Steps Parku said:
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Click to expand...
Click to collapse
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
hey.
I have this problem with my e7 ,
could you fix it , please ?
I have the same problem with zte nubia z7max, so its qualcomm issue that has rarely been talked about and I couldn't find any solution to it at all too.
if find one,let me know plzzzz.
thnx