Database Users

Plz Help can't find anything on Internet about my problem

I really hope there is somebody with insight about my problem with my Samsung Omnia b7610.
A while a go I wanted to flash my Omnia (original version 6.5 from Samsung site)
It wend wrong...
When I now turn on my phone and connect it to PC, I only see the Battery charging. When I turn the phone on I only see the SAMSUNG logo.
I remember that before I could see a picture of a phone connecting to a pc. But that picture doesnt come anymore. So I Cant flash the phone anymore.
Hard reset doesnt work.
I tried Octans. Detect device doesnt work.
I use Win7 installed drivers and I can see in System Management that under phones Samsung MIT's USB sync is installed. That's all the phone can do right now.
I hope somebody can help me. Is there for example a way to get into a bootloader menu like the HD2 phone?
Thnx,

http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/294673/guide-to-flash-on-windows-7/
Try this flash tutorial for windows 7 x32
I used it for my flashings and it works.
One thing that you should verify is on the OCTANS or OCTANS MINI exe, the compatibility should be for Win XP.
After that if you have the drivers already installed, the phone should be detected after pressing "detect"
JUST PLUG THE PHONE AFTER PRESSING DETECT
if you don't do it it will start charging and does nothing

Thanks for reaction but...
real_life said:
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/294673/guide-to-flash-on-windows-7/
Try this flash tutorial for windows 7 x32
I used it for my flashings and it works.
One thing that you should verify is on the OCTANS or OCTANS MINI exe, the compatibility should be for Win XP.
After that if you have the drivers already installed, the phone should be detected after pressing "detect"
JUST PLUG THE PHONE AFTER PRESSING DETECT
if you don't do it it will start charging and does nothing
Click to expand...
Click to collapse
Tried this, and I also tried it on a XP machine now...
I think the problem is that I only see the Samsung logo on startup. I can remember that first I saw a picture of a phone connecting to a pc. It just stops at the Samsung logo...
Thanx for reply...

just get octans 2.14 download any rom from modaco
1 take battery out put it back
2 start octans chose pda (*.nb0)
3 thick skip os updating from movinand, erase nv pda , start download immediately
4 click detect
plugin the usb into the device (must be off)
then a few sec download will start.

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:

Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)

http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2

I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s

diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .

Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.

Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571

Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.

Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:

xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected

Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2

Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged

alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

Bricked Elife E7, Human Interface Device (HID) Detection Help

Hi Everyone, In an attempt to fix my bricked device with all necessary flash files and drivers installed perfectly, my device is being detected under 'HUMAN INTERFACE DEVICE' as a 'USB INPUT DEVICE' in device manager, according to what i read, my device is suppose to display or be detected as "qulacom HS-USB qloader 9008" under com port. but that isn't happening, i repaired the drivers, re-installed them, formatted my pc and tried it on fresh windows installation. but still the problem is there. i even tried it on several computers but it still detects as USB INPUT DEVICE under Human Interface Devices in device manager. Now i am stuck here with my device dead for the past two weeks. please any one with an idea how to fix this issue?
i will be deeply grateful. Thanks!!
:crying:

Steps Parku said:
Hi Everyone, In an attempt to fix my bricked device with all necessary flash files and drivers installed perfectly, my device is being detected under 'HUMAN INTERFACE DEVICE' as a 'USB INPUT DEVICE' in device manager, according to what i read, my device is suppose to display or be detected as "qulacom HS-USB qloader 9008" under com port. but that isn't happening, i repaired the drivers, re-installed them, formatted my pc and tried it on fresh windows installation. but still the problem is there. i even tried it on several computers but it still detects as USB INPUT DEVICE under Human Interface Devices in device manager. Now i am stuck here with my device dead for the past two weeks. please any one with an idea how to fix this issue?
i will be deeply grateful. Thanks!!
:crying:
Click to expand...
Click to collapse
follow this
1. join in recovery mode (cwm)
2. go mounts and stroge and format system
3 reboot ur device ( Now the loop is eliminated, just a static imagen )
3. dowload drives, firmware , and QNCG
4. install drivers or repair it
5 when the step 4 is done, plug ur device on elife logo and wait for driver installation(like 10 min)
6 use winrar for descompress the firmware
7open GNQC select bp browser, and search in folder firmware a file called BP_imagen
8 try with genereal mode or emergency mode, and click dowload
i did it, its working
u must have patience dont worry
try it, its working
good luck

Still Not Helpful.
andresplata94 said:
follow this
1. join in recovery mode (cwm)
2. go mounts and stroge and format system
3 reboot ur device ( Now the loop is eliminated, just a static imagen )
3. dowload drives, firmware , and QNCG
4. install drivers or repair it
5 when the step 4 is done, plug ur device on elife logo and wait for driver installation(like 10 min)
6 use winrar for descompress the firmware
7open GNQC select bp browser, and search in folder firmware a file called BP_imagen
8 try with genereal mode or emergency mode, and click dowload
i did it, its working
u must have patience dont worry
try it, its working
good luck
Click to expand...
Click to collapse
Actually my device doesn't even come on for me to do all that you said, i tried repairing drivers and all that but it still detects as USB INPUT DEVICE under HUMAN INTERFACE DEVICES. i need my device to detect as qualcomm device before GNQC downloader can detect it. my issue is very different here. because GNQC can't see my device since my device is not being detected the rightful way after all. i will deeply appreciate the solution. Thanks

did u fix it??

U can fix ? I have the same problem since three weeks and nothing... this a a sh*t... only recognized by HID... In other ocassion before of this, i can flash my Gionee but now i cant:crying:

Another one here who saw how the phone bricked after being flashed with GnQc, now when I plug the Usb on the Pc or with wall charger, the red light keep lit and it seems like it will like this forever. I am thinking of trying to get out the screen and disconnect the battery, seems like the phone is stuck on some strange mode.
Thanks.

This feel that not have solution....

Can any one fix it ?

i also got stuck . have given to gionee care they are unable to figure what was the actuall problem

Steps Parku said:
Actually my device doesn't even come on for me to do all that you said, i tried repairing drivers and all that but it still detects as USB INPUT DEVICE under HUMAN INTERFACE DEVICES. i need my device to detect as qualcomm device before GNQC downloader can detect it. my issue is very different here. because GNQC can't see my device since my device is not being detected the rightful way after all. i will deeply appreciate the solution. Thanks
Click to expand...
Click to collapse
the problem for me is that it have recovery stock english(e3) and i can't do anything...
anyone fixed the problem? i have my gionee bricked....

Updating Yotaphone 2 YD201 ME Build

Dear all, I'm new here and just got my yotaphone 2 today, bought it locally from UAE, i beleive that the build ME refers to Middle East, got an android version of 4.4.3 YD201 model.
I thought that YD201 models are OTA updatable versions but seems not
Please can you guide me in a simple way how to update to lollipop? Noting that I've never flashed or done this before
Thank you so much..

https://forum.xda-developers.com/yo...grade-yotaphone-2yd206-running-4-4-4-t3506293
You can follow this guide fully but you don't need to flash HK first, so you just flash RU 5.0.0 firmware directly.

Caferatte89 said:
https://forum.xda-developers.com/yo...grade-yotaphone-2yd206-running-4-4-4-t3506293
You can follow this guide fully but you don't need to flash HK first, so you just flash RU 5.0.0 firmware directly.
Click to expand...
Click to collapse
Thank you so much.. Totally appreciate that.. But I don't know if it really matters as the tools relates to YD206 while I have YD201.. Should I proceed ?

By the tools do you mean YotaphoneFlasher? It works on both 201 and 206 since it's from official.

Thank you again.. OK I'm all set everything is ready but the only thing that's keeping me is drivers installation... Somehow the Google drive coming with the flasher is not being installed. I tried all ways possible, I.e. right click on the INF file and install but I get error message, and also tried to install it from device manager but couldn't. Can you please help with this? Thanks again
Btw I'm using Windows 7

Would you mind to post the srceenshot so I know your problem?
https://www.youtube.com/watch?v=R3wROHMJBDU This is the video of how you install driver

Caferatte89 said:
Would you mind to post the srceenshot so I know your problem?
https://www.youtube.com/watch?v=R3wROHMJBDU This is the video of how you install driver
Click to expand...
Click to collapse
my dear friend, i managed to update the driver, thanks to you, but it seems that when i power off the phone and enter the "downloading " mode on the phone screen then connect it to the computer it seems the phone is not being connected.. i used the flasher chosed option 1 "flash the cellphone" then i get the message "waiting for device" on the flasher..
i had a screenshot just to show that i have done everything i should (i guess) .. i.e. copied the firmware.. etc,,,
mindyou, i think the problem is that when i conncet the phone to usb it goes under other devices/Android which is not being recognized..
you are the best and thank you for your help again and again!

Weird. Do you've already install both drivers and restart your computer?
If yes, how about try to plug another usb port?

I got both ADB and Qualm drivers installed.. but nothing happening! I tried the 3 usb ports already..
I don't know how to solve this.. I think I need to try it on another computer .. maybe it'll work out!

Your driver not properly install. Try reboot pc, enable usb debugging at phone, plug in usb. See if there is any changes at device manager.
There is yellow triangle. So it mean.. Oh.. Oo..
If stilk not ok. Plug out usb from pc. At device manager, unsinstall both yellow triangle. Plug in back usb. So it will detect device and windows trying to install it.

If you have Windows 10 you have to disable signature driver verification, entering in the advanced boot menu of windows. After that the .inf driver will install.

I got the update at last and it's working beautifully smooth I downloaded universal driver from adbdriver.com and it worked perfectly. Thank you all guys for your help and efforts

Bootloop Problem / Unable to flash as i can't even install usb driver

Hey there guys, so as the title suggests, i'm having a bootloop problem on my m30s sm-307f, i can't access recovery mode, and i'm unable to start the flashing process because i can't even install the usb driver, i've tried several drivers, using several cables, on several systems (windows 7 / windows 10 / windows 11), and i always get that infamous yellow triangle on the SAMSUNG Mobile USB CDC Composite Device in the Universal Serial Bus Controllers section in the device manager, the phone was operating normally one day, and the next day when i try to power it on, i get this, i'm absolutely certain that i did nothing to the phone, not even an update, and it most definitely didn't fall to the ground, please respond, i have really important data there, and it would devastating to lose it, and thanks a lot.

Can you access Download Mode?

UniX1803 said:
Can you access Download Mode?
Click to expand...
Click to collapse
Yes i can.

Ok. Can Odin detect your phone?

UniX1803 said:
Ok. Can Odin detect your phone?
Click to expand...
Click to collapse
No, unfortunately it can't, which is to be expected since windows itself can't detect it.

Is your USB Cable connected when you try to boot to Recovery Mode? when the screen goes black, press Vol+ & Power until Samsung Logo appears, Release Power, hold Vol+ until Recovery Mode appears.

UniX1803 said:
Is your USB Cable connected when you try to boot to Recovery Mode? when the screen goes black, press Vol+ & Power until Samsung Logo appears, Release Power, hold Vol+ until Recovery Mode appears.
Click to expand...
Click to collapse
I do know how to get to download mode, i did of course try, and although it does appear on the phone that it's working, the computer doesn't detect the latter as i explained, and as such, odin doesn't detect it as well.

I was talking about Recovery Mode.

UniX1803 said:
I was talking about Recovery Mode.
Click to expand...
Click to collapse
Sorry, i didn't notice that, i'm unable to access recovery mode either because the phone just keeps rebooting.

I had the same problem but following the mentioned steps did worked for me. It's that short moment when the screen turns black, where you have to push that buttons. USB Cable needs to be plugged in!
If this solution is not working for you, try searching the web. I found more than one potential solution. Good luck.

UniX1803 said:
I had the same problem but following the mentioned steps did worked for me. It's that short moment when the screen turns black, where you have to push that buttons. USB Cable needs to be plugged in!
If this solution is not working for you, try searching the web. I found more than one potential solution. Good luck.
Click to expand...
Click to collapse
Thanks a lot for the help, i really appreciate it, some people are saying that it's a motherboard problem, what do you think ?

Could be, but i'm not sure. I would try to find a software solution, until you are sure it's not to get fixed on this way.

UniX1803 said:
Could be, but i'm not sure. I would try to find a software solution, until you are sure it's not to get fixed on this way.
Click to expand...
Click to collapse
You're right, again, thanks a lot for your help.

Try uninstalling the device in device manager and try those before plugging it in again.
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com

treety said:
Try uninstalling the device in device manager and try those before plugging it in again.
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Click to expand...
Click to collapse
I've already tried them, they didn't work as intended unfortunately, thanks for the reply though.

Were you ever able to solve this? Is it a hardware issue? I think that may be the correct determination. I'm going to take this one apart and see if I find anything that would corroborate.

stoag said:
Were you ever able to solve this? Is it a hardware issue? I think that may be the correct determination. I'm going to take this one apart and see if I find anything that would corroborate.
Click to expand...
Click to collapse
Unfortunately, i wasn't able to, but i think it's most likely hardware related.