I have setup the phone to sync weather for example every half an hour. If the phone is on stand by it does not sync. It is as if it turns off the data connection. Any help would be appreciated.
Any ideas? It will only sync when the phone is awake and unlocked? If the phone is locked it doesn't sync
Im surpriesed nobody can help with this!
You are certain it is only the weather that is not auto updating?
sharkie405 said:
You are certain it is only the weather that is not auto updating?
Click to expand...
Click to collapse
That is the only thing I have noticed so far.
No help at all? Basicily data does not sync at all when the phone is on stand by. It is as if the data connection disconnects. I cant seem to work out how to "keep it alive" Any help would be appreciated.
GhostXSeries, what activity do you expect from your phone in stand by (sleep) mode?
Sleep mode also called "standby mode" is an inactive state of the device that is quickly brought back into action by touching any keyboard key or pressing the on/off switch. It is used to save battery power.
In sleep mode the screen is turned off, all system processes are suspended (including data transfer), and the CPU is throttled down to its lowest power state - no activity. However, all instructions and data still reside in memory, and dynamic RAM memory chips require power to hold their content.
So what kinda sync do you want to have?
AndrewSh said:
GhostXSeries, what activity do you expect from your phone in stand by (sleep) mode?
Sleep mode also called "standby mode" is an inactive state of the device that is quickly brought back into action by touching any keyboard key or pressing the on/off switch. It is used to save battery power.
In sleep mode the screen is turned off, all system processes are suspended (including data transfer), and the CPU is throttled down to its lowest power state - no activity. However, all instructions and data still reside in memory, and dynamic RAM memory chips require power to hold their content.
So what kinda sync do you want to have?
Click to expand...
Click to collapse
The main one I would like to have updated is the weather. I do not see the point of being able to set the weather to automticly update every half an hour if the phone does not do it while in stand by mode. If I turn the phone on and update maually it works fine. Is there any way to sort this?
My phone will automatically update itself if the set amount of time as passed while it was in standby mode. Meaning, if I set it to autoupdate every hour and I've had my phone in standby mode for 2 hours, when I wake it up, it will automatically sync the weather and any other data that should have been syncing during it's standby phase. Does your phone not do this as well?
There is also an app called "Screen Off" which will ONLY turn off the screen and not put your phone in stand by mode which means that all data and such will continue to function while your screen is off.
Oh and I was waiting on a definitive repsonse to the "only weather" question I asked. Obviously, just your weather not updating properly and ALL your data not updating properly are two very different problems.
I did not read the first post carefully. So you mean - the system timers do not work properly - they don't wake up your phone from standby for weather update?
I have mine set to do the same, but fo example for again the weather, I have it set to update every 1 hours, when I leave the phone on overnight and check it in the morning it does not update untill I press the manual update button.
Say I had the phone updated at 11pm and put it on stand by, check the phone at 8am the last update time was 11pm. It will stay at 11pm and only when I press the update button does it then update. It is not an overly big thing but I am under the impression that If I set the phone to update every hour even if it is on stand by or not the latest it should be behind is 59 minutes!
Related
Will Wifi drain my battery even when in sleep mode ?
I charged my phone last night as I always do right up to 100%. Left it in sleep mode and went to bed.
Received a call this morning and when the phone switched on noticed my battery was on 26% and it was trying to connect to wifi.
Is wifi similar to bluetooth in that I believe bluetooth will still be active and receiving in sleep mode and will so drain the battery ? I could have sworn I have left wifi on before in sleep mode and it didnt drain the battery, but maybe I am wrong.
So will wifi in sleep drain my battery to that extent ie from 100% to 26% from about 10.30 last night to 10am this morning ?
The wierd thing is I was playing with it all day yesterday and the battery only got to 39% or something.
Is something wrong ?
yes, leaving your wifi on will cause battery drain. If there's any traffic, this gets worse
Also activesync may have been running and trying to connect every 10 minutes or so. The activesync problem has been mentioned in another thread.
Just hope its just battery drain and not a fault.
Yes, I second the observation... 2 hours powered off drains 40% battery power...
That sucks, the blueangel didn't do that. It automatically turned wireless off on shutdown and turned it on again on wakeup.
Now I'll have to get used to doing that manually... :?
If you still have the BA, or if somebody else could check, look for this key in the registry:
HKLM\System\CurrentontrolSet\Control\Power\State\Suspend
There will be various values there. Default = 3, means state D3, which is the suspend state.
If there are any other values there, please note the value name, and the value of it.
If there aren't, check whether there are any subkeys.
For example, the Qtek 9100 has subkey {98C5250D-C29A-4985-AE5F-ADE5367E5006} which, if you look under HKLM\System\CurrentontrolSet\Control\Power\State\Interfaces\, you'll see is "Power-manageable NDIS miniports". Its default value is 4 for state D4, which is the -off- state.
Basically, I suspect, or rather expect, that the BA will have another value or subkey there which will refer to the wireless connection, and set its state to 4 as well. If that's not the case, then it's being handled more directly by whatever power manager adjustments they have made - rather than letting Windows CE's power management handle it as above.
kilrah said:
Yes, I second the observation... 2 hours powered off drains 40% battery power...
That sucks, the blueangel didn't do that. It automatically turned wireless off on shutdown and turned it on again on wakeup.
Now I'll have to get used to doing that manually... :?
Click to expand...
Click to collapse
The daft thing is when you switch your device back on, you arnt connected to the wireless network and it has to find a signal again. So its like its keeping the wifi switched on but for no reason whatsoever !
What would be cool is if on putting the device into sleep mode it would automatically put the wifi into low power mode so you could leave it on without it whacking your battery and you could possibly receive msn alerts.
That was sort of what the BA did.. :?
I still have it but with a broken screen
So unfortunately can't check, maybe someone else?
I think I've found the way to deactivate wifi again when the manager doesn't want to. Tap on the OS's connectivity icon at the top of the screen. It may say Enable wifi or disable wifi. If it says activate, tap once to activate and once again to deactivate. If it says deactivate just tap once. Then go into the wireless manager again, it should now be off. Works for mine at least
Hi guys,
I have a problem with my Jade. I've charged it last evening and I've barely used it. When I've went to bed it was 96% charged (ARIELbattery) and 10 minutes used.
This morning, when I've woke up, The battery was 33% and and the phone was 34 minutes usage time.
Something is wrong. Since there were no bluetooth, no wifi, no anything activated. And for sure, nobody played with the phone during the night.
This is not the first time when I see this behavior, but is the first time when the decrease is so big.
I suspect an app, but I do not know which of them. How can I see it?
Do you have other suggestions?
thanks!
There are some possible reasons:
Some SD-Cards seem to drain battery, so you can take it out for a test.
Some additional software is told to drain battery. Did you install something?
It is also helpful to switch to "flight-mode" over night. This normally reduces battery drain to nearly zero, if no additional consumers exist.
Hi,
Yes I've installed some software, like gAlarm, S2U2, icontact,ThumbCal, Skype, etc but last night none of them was started.
What can I do with the SD Card?! I need the SD-Card. Which card does not drain battery and which does?
I cannot turn off the phone over night.
Some clues here in this forum
http://forum.xda-developers.com/showthread.php?t=514556&highlight=battery
I've read those before posting, but there was no answer to my problem. I have 67% drop of battery in 8 hours without touching the phone.
This is most likely that your device goes to screenoff or unattended power state instead of sleep. Your power settings might be corrupted. To change that go to your power settings advanced tab and change everything there (checkboxes and sliders), press ok and then change them back as they were, press ok. I'd suggest to keep the device turning off in one minute while on battery and none of the checkboxes for cord powered mode. There is a really freaky thing that even if you get your device to sleep with power button it will go back to screenoff mode after time specified by the turn off device slider while on battery IF you don't have that turn-off-while-on-battery checkbox checked there.
darfri said:
even if you get your device to sleep with power button it will go back to screenoff mode after time specified by the turn off device slider while on battery IF you don't have that turn-off-while-on-battery checkbox checked there.
Click to expand...
Click to collapse
Thanks for the answer. But I do not really understand what you are saying here.
My power settings are: 30sec for Screen Light and 1 min for Device (on battery).
None of the check boxes is set for the case when the device is powered.
It could also be due to the battery defect. After some time the battery could lose its storage ability (because of the defect), despite the mAH stated.
As a comparison, my battery is nearly one year old. On full charge, overnight drawdown (on sleep mode) is about 2%-3% .
ungureanub said:
Hi,
Yes I've installed some software, like gAlarm, S2U2, icontact,ThumbCal, Skype, etc but last night none of them was started.
What can I do with the SD Card?! I need the SD-Card. Which card does not drain battery and which does?
I cannot turn off the phone over night.
Click to expand...
Click to collapse
I have no own experiences with this programs but Skype for example needs permanent connection to internet when activated (be care of the background job!). This uses data connection and this drains battery. I can not quantify this in %. In addition Skype does not allow the system to switch to deep sleep because it needs permanent connection!
None of the app was started. I just have Skype installed, but it was not used.
Uninstall S2U2 !!!!!
nicodbgh said:
Uninstall S2U2 !!!!!
Click to expand...
Click to collapse
I found some German threads that discuss a problem with this software and battery life. Some loose 10% over night others 50%. I think you should try to uninstall (and afterwards soft-reset!) for a night and see what happens.
Please keep us informed.
First of all, I've disabled the 3G. Now it only gsm with gprs. Since I've done this it seems the battery drop is ... super ok. If yesterday morning I've had 33%, this morning I've had 20%, so 13% drop in 24h, and the phone was used normally as before.
last night the S2U2 was not started.
I will wait until the battery level reaches 10% an I will do a full charge.
I will keep you informed. Thanks to all for advices!
Some clues here too ...
http://forum.xda-developers.com/showthread.php?t=471365&highlight=battery+3g&page=2
Hi,
So now, 2 weeks later... after setting my Jade to GSM only (no 3G) I get 7-8 days of normal usage. As I said, before I always had to charge it the third day.
Normally, i get -28mAh drain in standby. When the screen is on around -130mAh (for wake up) and then -70mAh. In a gsm call i get around -250mAh.
I did not switch the phone back to 3G yet, but I will and I will see again the battery drain.
PS: the values were provided by Mobadi.
i believe i have S2U2 installed... and my phones fine!
i have the overloaded rom... and battery life seems great only needs charging every 3 or so days and i do use it quite alot!
so...
after some time of testing and re-testing I still have, from time to time, the behavior that during night I see a massive drop in battery level and an increase of the usage time.
I do not know what is going on, but I suspect that some app is waking up the device to do some work (without turning on the screen), and the Jade cannot go to sleep anymore for a while.
I've notice the same behavior on a HTC Diamond 2.
Since none of the app I have installed on my Jade are installed on my friends Diamond2, I have no idea what app could do that.
If anybody has any idea, feel free .... I am idea-less!
I've made myself a little application to log the current values of the power data. So, I've saw that my phone wakes up each hour by himself, without turning on the screen, does some work (cca -70mA) and after 30sec goes back to sleep.
Any ideea about this?
Hi,
I thought that I could use Tasker (https://play.google.com/store/apps/...EsIm5ldC5kaW5nbGlzY2guYW5kcm9pZC50YXNrZXJtIl0.) to save battery life. So, what I did was to prepare the following profiles:
a) Disable autosync, enable it to 3 minutes every 30 minutes. Sync only between 6:30 and 23:05.
b) Enable autosync while on AC power, disable when not.
c) Disable wifi, enable it for 15 seconds every 15 minutes so the system would have time to connect to a known wifi if available. Then disable wifi unless its already connected.
d) When a wifi connection starts, do nothing. When it gets disconnected (like when I leave home), disable wifi.
I only use EDGE. I only sync gmail, contacts and calendar.
Before this, I had autosync and wifi on all the time so I believed this setting should conserve battery. Everything works, Tasker app itself is not draining much from the battery (according to Betterbatterystats its really negligible) but still, I have a considerably higher energy loss than with default setting.
Do you know whats the reason for this? Is is caused by the wifi enabling and disabling - taking more power? Is it caused by the fact all sync gets done at the same time? Or why is that?
Im generally happy with the Nexus S battery life but this outcome makes me curious ...
EDIT: My advanced wifi system setting always was "never disable wifi when screen is off". Also, for the purpose of this test, I disabled wifi AP on my router to check just for the outcome of the wifi search.
Check out your Awake time (can find this in BetterBatteryStats), you'll probably notice the phone stays awake for longer than it would normally. Normally the phone would go into a practically permanent "sleep" state, powering nothing but your radio, when the screen is off and doing nothing. It would just wake up every X minutes to autosync or for other alarms (exchange sync, etc) and then go back to sleep. I wouldn't be surprised if it is solely the wifi option.
Depending on the advanced setting in the wifi options, it keeps the connection indefinitely or drops it after a certain amount of time, i think around 15mins - 30 mins. This may need to be changed to fit the circumstances.
Overall though, benefiting from the use of Tasker or similar program for battery life purposes doesn't gain much over what android already does (albeit still with alot of room for improvement).
Well, I should've mentioned this: My advanced wifi system setting always was "never disable wifi when screen is off". So thats not possible reason.
Also, for the purpose of this test, I disabled wifi AP on my router to check just for the outcome of the wifi search.
I basically believed that before, the phone had wifi on and checked around every now and then. And with the new setting, it would check less often, therefore saving battery.
Awake time is about 40 minutes in 7 hours sleep.
EDIT: Maybe it would help to adjust the times better.
Hi,
I've been using Nook for two years and Nook Simple Touch for 5 months or so.
I've rooted both my devices and used them that way (until my original Nook got those screen problems and became unusable)
Starting from first days I realized that the battery life was quite shorter than advertised. In fact it was almost unacceptable, like draining %10-15 a day while standing by (at the regular screensaver)
First I thought this was caused by the rooting and custom firmware. I tried the regular disabling of services, but to no avail. After a while I decided to return to the stock 1.1 firmware (on NST). To my horror I saw that nothing changed. Then I rerooted the hardware, still same.
One day, while I was reading a book I got a call and had to leave the house very fast. Thus I bagged the NST and got out of the house.
After returning home, I left that bag in my living room and did not open it for five days. After five days I picked up the NST, which was %70 charged five days ago, sure that I had to charge it again. To my surprise I saw that the charge was still %62. How could this happen, I began to querry. And remembered that I did not manually activate the screensaver -which was my general behaviour.
After that day I did not manually activate the screensaver even once and the battery drain is never more than 1-2%/day.
I'm not an Android developer, I'm a regular computer guy (using computers for almost 30 years) but I have strong gut feeling that this may be the problem, that manually activating the screensaver is not same as activation after a time out.
I guess many people over here, being -not regular users but optimization obsessed technical people- prefer to activate the screensaver manually. Thus they have the drain problem.
If you are suffering the same problem, please test this and write your feedbacks over here. May be one of the coders can look into this problem in the end.
With kind regards
You may be onto something there.
I certainly believe that the problems are related to not fully going into sleep mode.
I have caught the Nook many times that it was supposed to be sleeping and the touch screen was still running.
I always used the power button when I'm done, I had the screen timeout set on one hour.
I just set my screen timeout to 10 seconds to play with this.
I couldn't get the Nook to act up with the power button shutdown.
To set your screen timeout to a arbitrary value (time in milliseconds):
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update system set value=10000 where name='screen_off_timeout';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
foredog,
Could you clarify a bit, please?
Nook can go into screensaver via
timeout,
front button,
back power button or
"button savior Off" button.
Which button you referring too to manually activate the screensaver?
foredog said:
After that day I did not manually activate the screensaver even once and the battery drain is never more than 1-2%/day.
Click to expand...
Click to collapse
I use my Nook Simple Touch minimally and almost always use the back button to activate the screensaver. I see pretty good battery life upto 20+ days. The only thing I do differently from you is turn off wifi before I activate the screensaver. Maybe wifi is the main cause for the battery drain.
--
cbay said:
I use my Nook Simple Touch minimally and almost always use the back button to activate the screensaver. I see pretty good battery life upto 20+ days. The only thing I do differently from you is turn off wifi before I activate the screensaver. Maybe wifi is the main cause for the battery drain.
Click to expand...
Click to collapse
WiFi is definitely a big one.
Any easy way to "auto turn it off" with screensaver activation?
Don't know about that - I always use the "sleep" button to activate the "screensaver". Right now, I'm up to a month of use, and like 30% batt still. I turn wifi on when I need it, and off again when I don't. Glowlight on for like 20 min/day.
Actually really impressed with NST Glow.
Sorry I did not mention, that my wireless is always off.
@Apokrifx: I'm using the power button at the back to go to sleep mode.
What you all are saying is similar to general behavior. Everyone is not experiencing this drain among Nook users, only some.
In my case, letting NST time out really solved the problem.
What Renate says is really similar to my experience. Time and time I accidentally touched the screen (while it was on the screensaver and it asked for the swipe motion (meaning the touch interface is responding) which should not happen in the sleep mode.
I'll let you know if anything changes.
Thank you for the feedbacks.
I think the original post info is quite accurate. I notice when I don't go back to the home screen, and leave it on the stock reader when I put it down-- battery life is much better.
It appears that, when the stock reader is running, it shuts down most background services. But, that's just a theory.
i guess when u activate ur screensaver that wont drain power from ur battery ..... cuz in screensaver mood the animation on screen stopped like calculator screen ..... just display image and didnt move any pixels on screen ..... so .... ummm .... i guess ur problem may u not charge battery well .... let me tell u .... u must per month empty the battery until nook tells u that ur nook device cant power on .... and that will guarantee to u long life to ur battery also keep ur battery more efficiently and working perfect
hope i helped ..... best regards
Actually, I've had no battery problems in a while.
I've got rid of almost all the B&N stuff though.
USB host mode, with its polling seems to take a bunch of battery though.
It's still manageable.
I got my glowlight nook recently(after I stepped on my old Nook ST, ouch). When you have glowlight on and the Nook goes into sleep mode the glowlight turns off. It happens even if you press the back button. But... I had few instances when the screensaver activated and the glowlight didn't turn off... Can't reproduce this issue too often and with glowlight at least I know when it didn't turn off But other services might have simmilar issue.
I wonder whether this has anything to do with the wi-fi sleep mode you can tweak on normal Android phones... maybe the default sleep disconnects the wifi too, while the sleep button in the back just activates the screensaver.
Renate NST said:
You may be onto something there.
I certainly believe that the problems are related to not fully going into sleep mode.
I have caught the Nook many times that it was supposed to be sleeping and the touch screen was still running.
I always used the power button when I'm done, I had the screen timeout set on one hour.
I just set my screen timeout to 10 seconds to play with this.
I couldn't get the Nook to act up with the power button shutdown.
To set your screen timeout to a arbitrary value (time in milliseconds):
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update system set value=10000 where name='screen_off_timeout';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Click to expand...
Click to collapse
Hi,
The UK went crazy with the Nook last week and I got one. I also got the problem with the battery. I have tried this:
This is taken from qvc forum. I cannot paste the link, as this my first post. This is what Bogeygirl says: (you will need to google the text below, and find this on qvc)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I love my Nook Simple Touch that I purchased in February of this year. I was so disappointed that after this short time and charging to 100% it would drain to 8% over night..This happened twice. I did NOT have the wi-fi on and the automatic shutoff I had set to 2 minutes so no issue there. No recent updates had been done to cause an issue like this.
I was not worried because it was still under warranty and would be replaced. So I called B&N CS and went through all the steps with them to make sure it was in fact defective.
He asked me to totally shut it down and do a hard reset and re-re-register the unit. I was not hopeful that this would work at all. I know that a hard reset can fix a multitude of sins but I never would have thought it would work to fix this battery draining issue..To my surprise it worked.. Battery charge is holding just like before.. I read a lot and usually charge it once a month.. I am so glad that this worked. Such an easy fix but I will continue to monitor the battery charge just in case.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have tried it, and it seems to work fine, holding charge OK. Bogeygirl says hard reset, but it is the soft one. Foredog says that you don’t need to click the power button to sleep (just leave Nook to do the job for you), but I do click it to sleep, and I do also tap the screen, just to make sure that it is properly sleeping. It is fine at the moment. I think the whole problem with the battery is a software error with sleeping mode, as you say here. I think you are right.
I don’t have it rooted, as I only want it for reading.
Do you have any other advice for the battery? Or easier? I think everybody is having problems with the battery.:crying:
Thanks
Deep Sleep Battery Saver?
Does Deep Sleep Battery Saver help with the power-button not sleeping properly?
It performs several functions:
1. Supposedly automatically puts the device into sleep mode whenever the screen turns off (if you configure it properly).
2. Functions as a task killer, with a whitelist, to clear out buggy apps.
3. The Whitelist allows you to prevent useful apps from being killed.
I still use the power button to put the NST to sleep. Last night it drained about 7% overnight, although I leave WiFi on and read RSS feeds for an hour before putting it down. Also, DSBS is configured to wake up the device every four hours.
smayonak said:
Does Deep Sleep Battery Saver help with the power-button not sleeping properly?
It performs several functions:
1. Supposedly automatically puts the device into sleep mode whenever the screen turns off (if you configure it properly).
2. Functions as a task killer, with a whitelist, to clear out buggy apps.
3. The Whitelist allows you to prevent useful apps from being killed.
I still use the power button to put the NST to sleep. Last night it drained about 7% overnight, although I leave WiFi on and read RSS feeds for an hour before putting it down. Also, DSBS is configured to wake up the device every four hours.
Click to expand...
Click to collapse
The battery drain is due to some BN apps and Android System apps, mainly. I use the last version of "SystemApp Remover" for disabling apps (eg:AFfileDownloadService.apk,AccountAndSyncSettin gs.apk, BnAuthenticationService.apk, BnCloudRequestSvc.apk, DemoMode.apk, DeviceManager.apk, DeviceRegistrator.apk, Music.apk, NookCommunity.apk, Phone.apk, QuickStartActivity.apk, Shop.apk, Social.apk ,TelephonyProvider.apk, WaveformDownloader.apk).
kuskro said:
The battery drain is due to some BN apps and Android System apps, mainly. I use the last version of "SystemApp Remover" for disabling apps (eg:AFfileDownloadService.apk,AccountAndSyncSettin gs.apk, BnAuthenticationService.apk, BnCloudRequestSvc.apk, DemoMode.apk, DeviceManager.apk, DeviceRegistrator.apk, Music.apk, NookCommunity.apk, Phone.apk, QuickStartActivity.apk, Shop.apk, Social.apk ,TelephonyProvider.apk, WaveformDownloader.apk).
Click to expand...
Click to collapse
I thought it was due to the device not sleeping after the power button was pressed?
I also removed those APKs from the system directory, thanks to many of you guys.
Switching Wifi Off Worked Well
ApokrifX said:
WiFi is definitely a big one.
Any easy way to "auto turn it off" with screensaver activation?
Click to expand...
Click to collapse
I had a Kobo mini & was not happy with the formatting of PDFs, hence I *had* to get a Nook Simple Touch ... the PDF formatting is excellent. However, I soon suffered the battery problem & couldn't get it to charge. I followed the advice on this page and it works so much better now. This is what I did :-
1) Switch off the Wifi. I have no need for it anyway as everything I read is PDFs loaded via SD card.
2) To charge, make sure the device is fully off using the back power button.
3) I charge it using a wall socket, rather than a computer. I have heard that this makes a difference in charging times.
It's early days, regarding how long it stays charged, but I reckon I will be resorting to switching the power off, rather than putting it on standby. I'm just pleased I managed to get it to charge at all and I am back in business.
assembler31415 said:
I had a Kobo mini & was not happy with the formatting of PDFs, hence I *had* to get a Nook Simple Touch ... the PDF formatting is excellent. However, I soon suffered the battery problem & couldn't get it to charge. I followed the advice on this page and it works so much better now. This is what I did :-
1) Switch off the Wifi. I have no need for it anyway as everything I read is PDFs loaded via SD card.
2) To charge, make sure the device is fully off using the back power button.
3) I charge it using a wall socket, rather than a computer. I have heard that this makes a difference in charging times.
It's early days, regarding how long it stays charged, but I reckon I will be resorting to switching the power off, rather than putting it on standby. I'm just pleased I managed to get it to charge at all and I am back in business.
Click to expand...
Click to collapse
You probably don't want to resort to always powering off your Nook all the way, because the boot-up sequence uses about 3 or 4 times as much battery as regular use, making multiple reboots take up a large amount of battery.
Renate NST said:
To set your screen timeout to a arbitrary value (time in milliseconds):
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update system set value=10000 where name='screen_off_timeout';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Click to expand...
Click to collapse
Is there a way to change default values?
I have a nook simple touch glowlight, it's about 5 years old. Recently it has been saying battery too low to use. I plug it in and it goes to restart right away. When I look at battery life it my be at 89% (this was today). Is there something I can do to make this stop? It's quite a pain to to this everyday. I read on this a lot about a 1000 pages per week. In the "old" days a charge would last 20-30 days! Please help, I hate to get a new on, I love my nook!
If I don't select to get the network time, my time is wrong when I take out the battery...
Sorry to dig this thread out.
YES IT DOES and IT'S STUPIDLY ANNOYING!!!.
Sorry for the CAPS, but I am beyond this. My phone is set to get the time through the network and I use 2 batteries that I charge on the cradle, I never charge the phone through its USB port unless really needed. I usually change my battery late at night as it holds a full day of work, so I am usually at home using airplane mode + home wifi, and every frigging time, it will reboot with the last known synchronised time AND DATE!!!!.. I also have a smartwatch connected and use it as a secure device to unlock my phone and because the bluetooth is ON by default as I reboot, it will mess with my smartwatch time/date, which in turns makes it forget fitness data on the current day.
After a few minutes over the wifi, the time will correct itself..
BUT it is very very very annoying. I had a few time already, the phone could sync the time, but my smartwatch remained unsync and my silent alarm was wrong.
Also, if the date was different and if I have an alarm set daily, it will go off (especially if the time sync takes too long to happen).
So... is there anyway to manually force the phone to synchronise the time, I could do that before I power it off. I tried to change the date and take the sync the time again, but it has been more or less successful. Does the network has to be on for this to work?
Is there a way to prevent the phone to turn on with the bluetooth on? (I think it's because it's looking for my watch)