Database Users

Install orginal WM6 with HardSPL 4.7?

Hey Guys,
during the last three month I tried a lot of roms out of this forum.
But now I want to reinstall the original WM6 on my Herald.
Is it neccessary, to patch my HardSPL down, or can I install it with the 4.7version without problems?
Thans for your help.
Sorber

it will be fine if u keep hard spl as long as you not flashing the stock rom
EDIT: i just reread the post yea you will need to remove it lol

.Sorber. said:
But know I want so reinstall the original WM6 on my Herald.
Is it neccessary, to patch my HardSPL down, or can I install it with the 4.7version without problems?
Click to expand...
Click to collapse
You can flash an original firmware without removing HardSPL. But beware of the fact, that you can't use an original ROM (RUU) without modifiyng the image!
The easiest way would be to use an original RUU and extract the parts of it with nbhtool. Then build a new ROM with the extracted OS.nb and then use the HTC Tool with the new OS.nb and the extracted ExtendedROM.nb and Splashscreen.nb to build a new .nbh.
After that you can flash this .nbh-File (Image).
I hoped it helped a little bit.

step 1. download the software from t-mobile
step 2. remove battery
step 3. hold down the cam button and put battery in. turn on phone.
step 4. you will then see the USB mode on your wing, connect it
to PC
step 5. install software and follow instructions...
thats it.
.Sorber. said:
Hey Guys,
during the last three month I tried a lot of roms out of this forum.
But now I want to reinstall the original WM6 on my Herald.
Is it neccessary, to patch my HardSPL down, or can I install it with the 4.7version without problems?
Thans for your help.
Sorber
Click to expand...
Click to collapse

artemis USPL - improvements

I was asked to patch USPL for ROM size checking when flashing via RUU, so this version does not check size even when flashing via USB. (original SPL skips the size checks only when SD flashing.)
I did this a few days ago, but didn't get around to posting it
download from attachment, enjoy! donations are always appreciated to the "To Cmonex" link in my signature
how to use it: if you already have a version of artemis USPL installed, simply flash this new version using RUU or from SD (ARTEIMG.NBH on FAT32 formatted SD)
in bootloader (tricolour mode) it should then say version: 1.11.cmon
for instructions on installing any USPL if you have no USPL yet - check out: http://forum.xda-developers.com/showthread.php?t=311403 until I have more time/motivation for userfriendly packaging
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)

Well done Cmonex..!
Thanks so much.
Peoples of Artemis forum wait it long times already.
Thread Sticked.
Cheers ..!

cmonex said:
.......
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)
Click to expand...
Click to collapse
Then with full HSPL, i see a lot of bricks coming to "life".
Hope u get motivated enough.
Thanks Cmonex, excelent stuff.

Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?

it's the same process.
The difference is that you can flash any rom without size limits.
Before you only could do this with SD Card method.

not working
its not working
it gives the same error : invalid size
canu explain step by step plzzzz

Is you bootloader showing SPL 1.11.cmon?

i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes

And where is the response to my question? ....

drlalitbida said:
i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes
Click to expand...
Click to collapse
you need to enter the tricolour screen to check version.

fhcoolos said:
Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?
Click to expand...
Click to collapse
does artemis have an issue with vista? tell me what kind of problem please

thats what i have written
no bootloader screen comes in between the upgrade process

drlalitbida said:
thats what i have written
no bootloader screen comes in between the upgrade process
Click to expand...
Click to collapse
you have to manually go to bootloader to flash the image

cmonex said:
does artemis have an issue with vista? tell me what kind of problem please
Click to expand...
Click to collapse
Usb drivers while u enter bootloader.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Cheers.

I want to thank you very much for this useful work. However I couldn't try it yet Because at the end of the rom update utility application (I mean %100) it gives a error 270 udate error image file corrupted. Please check your update utility I have tried all these attempts while my phone is at the bootloader mode.
Thank you in advance

Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?

oh！thanx！it's funny！

sean777 said:
Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?
Click to expand...
Click to collapse
Yes. All other files are the same.. infact you need to because zip does not have start_uspl.exe

need urgent help........
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...

Hello!
Is there any way to load USPL from bootloader (without ActiveSync)?
Regards!

Problem Flashing ROM

Hi, I have just flashed my handset with: RUU_Leo_Dopod_CHS_1.70.706.0_Radio_CRC_Signed_15.3 2.50.07U_2.07.51.22_2_Ship.exe
I now get the message 'your OS ROM isn't customized for your hardware.
Please reflash the proper ROM Code or contact the service centre.'
I'm trying to reflash RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.0 ¶
7U_2.06.51.07_Ship.exe, but it fails to communicate with the device.
Any ideas how I can fix this?
Thanks

Try downloading the relevant radio version from this link (note that download only contains the .nbh file):
http://forum.xda-developers.com/showthread.php?t=611787
Then download the CustomRUU.exe file from here:
http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1
Put both files in the same folder and run the CustomRUU.exe file and it should hopefully work.

Mastoid said:
Try downloading the relevant radio version from this link (note that download only contains the .nbh file):
Then download the CustomRUU.exe file from here:
Put both files in the same folder and run the CustomRUU.exe file and it should hopefully work.
Click to expand...
Click to collapse
Okay, tried that and it's exactly the same - gets to the stage 'verifying data on your pda' then gets connection error as it hasn't been able to connect through mobile device centre

blue sabre said:
Okay, tried that and it's exactly the same - gets to the stage 'verifying data on your pda' then gets connection error as it hasn't been able to connect through mobile device centre
Click to expand...
Click to collapse
Did you try this?
Go to Start > Settings > Connections > USB to PC > Uncheck "Enable advanced network functionality"

Mastoid said:
Did you try this?
Go to Start > Settings > Connections > USB to PC > Uncheck "Enable advanced network functionality"
Click to expand...
Click to collapse
I'm not able to get into any menus - I just have a black screen with the above error message in red text.

blue sabre said:
I'm not able to get into any menus - I just have a black screen with the above error message in red text.
Click to expand...
Click to collapse
Have you checked your HSPL version? there must be SPL 1.42.0000 on your device otherwise the installation will fail.
To check your SPL version, hold the Volume Down button and do a reset. It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.

Mastoid said:
Have you checked your HSPL version? there must be SPL 1.42.0000 on your device otherwise the installation will fail.
To check your SPL version, hold the Volume Down button and do a reset. It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.
Click to expand...
Click to collapse
Well I had hspl on there from this site. I was changing ROMS this morning as I wasn't massively impressed with the custom one I flashed it with. It wont let me flash with any ROM as the Update Utility Cannot connect to the phone.

blue sabre said:
Well I had hspl on there from this site. I was changing ROMS this morning as I wasn't massively impressed with the custom one I flashed it with. It wont let me flash with any ROM as the Update Utility Cannot connect to the phone.
Click to expand...
Click to collapse
Try take the battery out for about 2 minutes and then power it back on.

From the troubleshooting notes section found via this link, it stated the following:
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to HSPL !!! ... this means that you flashed a region protected rom... flash any other rom that has your region ID... or patch it

Mastoid said:
Try take the battery out for about 2 minutes and then power it back on.
Click to expand...
Click to collapse
Had no joy with that either! Will try to flash from SD Card- hopefully that'll do it!

As far as I understand the issue, it is not the ROMs that are region protected, so that is not what is causing the problem. I believe the problem is that some phones (like yours) have encoded firmware that possibly restricts the type of ROMs that can be installed? So, some people can only install ROMs that are designed for their region.

Flashing from SD Card seems to be doing the trick nicely. Phew.

blue sabre said:
Flashing from SD Card seems to be doing the trick nicely. Phew.
Click to expand...
Click to collapse
I am also relieved lol.

Btw, where are you from?

[NoDo ROM]HD7_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.1 5_NoDo, by ansar

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_TMOUS_1.20.531.01_Radio_5.51.09.11a_22.31.50.09U
2. RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.531 i.e. with characteristic value 531
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar

Oh yeah! Thanks a lot Ansar!! By the way, is there a reason we need to flash both roms?

Thx =)
Who know, how i can flashed to European Version with out gold card?

kwill said:
Oh yeah! Thanks a lot Ansar!! By the way, is there a reason we need to flash both roms?
Click to expand...
Click to collapse
Hi,
It is the flashing process, thnx for supporting.
Regards. ansar

FlexIDK said:
Thx =)
Who know, how i can flashed to European Version with out gold card?
Click to expand...
Click to collapse
Hi,
You are on the right track!!!
There is nothing more but flashing the provided ROMs.
Regards, ansar

ansar.ath.gr said:
Hi,
It is the flashing process, thnx for supporting.
Regards. ansar
Click to expand...
Click to collapse
Understood.
Also, anyone have a mirror for the second rom yet? As rapidshare failed once and made me waste a second download (having to wait 55 mins).
*edit* I'm getting error 226 (Flash Write) when flashing the first rom at about 95% through. Wasnt sure this was the error you were referencing as you mentioned error270. And when I try to flash the second rom I get invalid model id. I imagine thats because the first flash didn't work properly.

Russian mirror
B.1
http://narod.ru/disk/7988412001/RUU....54.09.21_22.33b.50.10_NoDo_by_ansar.zip.html
B.1 (reload)
http://narod.ru/disk/7994616001/RUU...4.09.21_22.33b.50.10_NoDo_by_ansar_2.zip.html
B.2
http://narod.ru/disk/7989127001/RUU...21_22.33b.50.10_NoDo_Signed_by_ansar.zip.html

ansar.ath.gr said:
Hi,
You are on the right track!!!
There is nothing more but flashing the provided ROMs.
Regards, ansar
Click to expand...
Click to collapse
On my HD7 install RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
I'm install RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_by_ansar
On 95% - i'm have error (#226 Flash Write)
After
I'm try install
RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_Signed_by_ansar
And see message INVALID MODEL ID

Oops, two guys have the same error when flashing this ROM, anyone else?...

FlexIDK said:
On my HD7 install RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
I'm install RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_by_ansar
On 95% - i'm have error (#226 Flash Write)
After
I'm try install
RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_Signed_by_ansar
And see message INVALID MODEL ID
Click to expand...
Click to collapse
Same thing here.
Reverted back to RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U_by_ansar.
[]'s
Cris

FlexIDK said:
On my HD7 install RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
I'm install RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_by_ansar
On 95% - i'm have error (#226 Flash Write)
After
I'm try install
RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_Signed_by_ansar
And see message INVALID MODEL ID
Click to expand...
Click to collapse
Hi,
An issue with the B.1. ROM may be has been encountered.
Now it is re-uploaded, you can proceed again and let me know if it is ok.
Regards, ansar.

Ok. So the first rom installed properly after the reupload. But, still getting the invalid model id error upon trying to install the second rom.

Yup I got the same error message at 95% also.
Also is there any way you can provide other mirrors for the files? Having to wait 40+ mins to download a second file is annoying. Especially when there was a problem with the first download making it useless.

I got an error too
kwill said:
Ok. So the first rom installed properly after the reupload. But, still getting the invalid model id error upon trying to install the second rom.
Click to expand...
Click to collapse
after 1%, please fix asap.

ecyoral said:
after 1%, please fix asap.
Click to expand...
Click to collapse
Same here now. Now I have to wait another 40 mins to re-download fixed file once available.

Can we flash other ROMS after this one?
Hi ansar.
After we sucessfull flash this new ROM, will it be unbranded, right?
So, would we be able to flash another ROM, like the ASIA one?
Regards and great work, I'm just waiting for a fix for the 2nd ROM and will flash it.
[]'s
Cris
PS: by the way, how can I support your work? Can I buy you some beers? =)

Install TMOUS_1.69.401.01_Radio_5.54.09.21_22 .33b.50.10_NoDo_ansar
after
Installing RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22 .33b.50.10_NoDo_Signed_by_ansar
"INVALID MODEL ID" Error ....
Help Me T.T

same bug than the other guys..

Any chance of just getting the branded rom from you?

i really, really hate RAPIDSHARE..
why u all are uploading to that site.. use Megaupload or something better..
40min waiting for a D*mn download
¬¬

[ROM]YardieROM v3(RUU_Mozart_S_HTC_Europe_5.01.401.04_5.71.09.02a _22 .51.50)Unlocked

Here is the new RUU_Mozart_S_HTC_Europe_5.01.401.04_5.71.09.02a_22 .51.50, unlocked and ready to go:
http://www.4shared.com/file/LgeeWQfG/Mozart_YardieROM_v3_501_7720.html
Changelog:
Developer Unlocked,max apps and prevent relock.
Custclear.provxml added to /windows
HTC theme replaced with grey theme
Alert tones 1-3 replaced with "you got Mail"etc
Internet explorer first run to google.
Added XBMods certs for update cabs.
SPL removed.
Instructions-
Be aware of XSPL issue with Mozart 4.XX & 5.XXroms, if required flash back to a NoDo rom before flashing XSPL.
1.Enter bootloader(Power on& vol-)
2.Flash RSPL(downgrade to NoDo if on 4.xx or 5.xx SPL)
3.Flash YardieROM using Rom Update Utility.
Respects out to Cotulla&DFT,bepe,ansar,XBMod,Football,Marvin_S,DaG,AnDim ,Ted973,Heathcliff74,airextreme&ceesheim for all the work they have put into WP7 development and creating the tools for us to play with.

--Reserved--

thank, after flashed will change the spl version? or stay with old hspl?

hengmy said:
thank, after flashed will change the spl version? or stay with old hspl?
Click to expand...
Click to collapse
It will remain with your original spl

Add Lang.
Is this rom able to work with RegistryEditor 1.2.0.0?
But it seems unable to save string I added.
thx
ps. I've managed to add Chinese to this ROM.

kevin3688 said:
Is this rom able to work with RegistryEditor 1.2.0.0?
I'm trying to add Chinese with RegistryEditor 1.2.0.0.
But it seems unable to save string I added.
thx
Click to expand...
Click to collapse
RUU_Mozart_S_HTC_Europe_5.01.401.04_5.71.09.02a_22 .51.50
Europe region... it means there is no chinese language pack in it.

The Registry Program 1.2.0 works
I need original theme, the new theme and Alert tones is not good.

I tried to flash your Rom it struck at 7%, luckily it didn't change my bootloader, back to Ansar's, thanks anyways.

the charging sound had been changed to "you got a voice message" not a big issue but.......

yardie.spike said:
It will remain with your original spl
Click to expand...
Click to collapse
Not good ... Is it reverssible ?

Caramel said:
Not good ... Is it reverssible ?
Click to expand...
Click to collapse
Whats not good?.....it means you can use XSPL and flash the latest roms rather than brick your Mozart.

Cheers Yardie boy
Loading it now

Be carrefull !!!
Begin flash with HSPL 1.32
Freeze while flashing
Reboot in bootloader to restart the flash.
Unable to flash again, Why ?
This rom put my Mozart in SPL 5.1, unable to go back in HSPL.

Caramel said:
Be carrefull !!!
Begin flash with HSPL 1.32
Freeze while flashing
Reboot in bootloader to restart the flash.
Unable to flash again, Why ?
This rom put my Mozart in SPL 5.1, unable to go back in HSPL.
Click to expand...
Click to collapse
No issue with HSPL 1.32 for me...no change in SPL either, what did you do different?
You could alwasy load an OSPL then put RSPL/HSPL on again.
The only little snag I noticed was connection set-up kept launching every reboot, which was resolved by deleting it...