Related
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 00028002 NOT ALLOW something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
tictac0566 said:
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
Click to expand...
Click to collapse
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
mon_money said:
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 02800 something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
Click to expand...
Click to collapse
Actually, you did everything correctly... except that you should use the stock ROM for your device, which is vodafone branded, isn´t it?
BTW, did you check the SPL version already? Because it might be already back to stock SPL, but then, you won´t be able to flash an original HTC ROM.
Being back at stock SPL (with vodafone CID) and trying to flash/launch an official HTC ROM on the branded device results in what you write!
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
EddyOS said:
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
Click to expand...
Click to collapse
mon_money said:
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
Click to expand...
Click to collapse
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
BIG thank you .. it is working now with the stock 1.43 rom.. and yes u are right.. it was showing me again 1.42 spl after uninstalling the HSPL.
u saved my hd2.. thx once again for ur great help..
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
Hi
Thanks for the link, however the 1.43 ROM is corrupt, I have tried downloading several times. I try to extra the RUU_Signed.nbh with winrar but it fails, the 1.66 and 1.72 Vodafone ROMs extract fine.
Basically I am trying to restore a Vodafone HD2 to stock ROM+SPL, reason being the phone they sent on an insurance replacement is rubbish e.g. the touchscreen isn't responsive. I tried changing to a custom ROM also Vodafone 1.66 and 1.72 to see if the problem would be fixed but it didn't help.
Now I just need to send the phone back for another replacement.
Does anyone have an alternative link for this 1.43 ROM?
I am having a similar issue.
I am trying remove HSPL, I have copied the .nbh file over to the SD already formatted as FAT 32 - I'm using my original ROM.
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
When I start with volume down pressed, I get a message saying " Upgrade ROM code error please try again " then the multi coloured screen with SPL-1.42.0000 XE.
Please help, I fear I have broken my phone ...
chrisukhd2 said:
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
Click to expand...
Click to collapse
Then your phone is probably provider rom locked.
SPL-1.42.0000 XE.
Click to expand...
Click to collapse
HSPL is already removed, which is why the WWE roms don't work. You need to find your provider released rom, or (far easier) run hspl2, choose 1.42.hspl, flash either of teh roms you mentioned above by USB, run hspl2 again, choose 1.42.0000 and done.
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
chrisukhd2 said:
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
Click to expand...
Click to collapse
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
ClydeB1 said:
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
Click to expand...
Click to collapse
pre - and indeed - cisely
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
I even tried with HSPL I had before and the same result.
Argghhhhhh
What can I be doing wrong here ?
Working now
I downloaded the latest O2 ROM 1.72.0 etc and it's working now.
Thanks again guys, you helped me a lot
Once more thing my phone now say's it has SPL-1.66 - I guess when unlocking using HSPL2, I now need to choose 1.66.000?
mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
1. download stock ROM
2. unpack/unzip and place ruu_signed.nbh and ROMUpdateUtility in sd card
3. make sure you have >50% battery life
4. with the device turned off, put sd card in
5. enter boot loader, device will automatically detect ROM file in sd card and
then will install this, it will install stock spl as well so hspl will be removed
chrisukhd2 said:
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
Click to expand...
Click to collapse
sounds like you tried to flash over sd card, which as any fule kno first thing it does is resets the spl, so hspl is no longer installed so the rest of the flash fails.
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
Click to expand...
Click to collapse
because its .0000
I even tried with HSPL I had before and the same result.
Argghhhhhh
Click to expand...
Click to collapse
used sd card again eh?
1 - boot the phone to bootloader. (Three coloured screen)
2 - run hspl2, choose whatever spl you like SO LONG AS it ends HSPL.
3 - when the phone reboots, keep volume down pressed to re enter bootloader
4 - run your rom flash over USB
5 - phone should now boot normally.
6 - if you now want to remove hspl again, re run HSPL2 and choose the spl you want, ENDING IN .0000
samsamuel
Yes Doh - I was flashing from SD and then trying to flash through USB. It all makes sense now. I got around it though by using the new O2 ROM that's just been released so I didn't need to unlock to bring my phone back to life.
Anyway it's all working fine now with the stock 1.72 O2 ROM, just flashed with HSPL2 and re-installed the Energy ROM.
Thanks again for all the help.
ahh good.
Its a good idea if you flash fairly regularly to do your flashing from bootloader, that way you are visually aware of your spl at every step. just get used to holding vol down as it reboots and you can do the whole thing, hspl, rom, radio, without ever having to pull the battery. just keep booting to tri colour till its done.
Hi All,
For those of you, who wants to go back to the WM 6.1 WWE 1.35.720.2 Stock ROM on the Viva, here it is...
This is the lastest english ROM that you can get from HTC. You may use this for warranty purpose or if you prefer going back to the stock ROM. This ROM has the Idea logo. The entire package was assembled from official HTC updates and has no customization/personalization at all. After applying this, you may want to use "stockspl" (see sticky thread) for warranty purpose.
Cheers!
thanks ddl.team but after flashing, it says: Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center.
Thank you ddl.team. After flashing, I receive the same message "Your OS isn't customized for your hardware."
me 2
HI I recive that message to, the big problem is that I can't install another ROM after this, I tried to flash hard spl 1 and 2 but it has no effect. Please give me a solution.
Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.
ddl.team said:
Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.
Click to expand...
Click to collapse
Hi. I tried as you said, but still no succes . Don't know what to try now.
no can do. thanks anyway.
1parsec said:
Hi. I tried as you said, but still no succes . Don't know what to try now.
Click to expand...
Click to collapse
TheRem said:
no can do. thanks anyway.
Click to expand...
Click to collapse
Even after removing ipl, stock radio etc it is not working for you both? It should work after removing it. I will try it later.
SPL
after I install this rom I can't Hard Spl again I'v tried with Opal_HardSPL_v2 and Opal_HardSPL_v1 there ar no working anymore, please give us a solution cuz now I can't instal another rom and with this my htc is useless.
SPL
The error from hard spl is 270 - the image file is corupted
is that rom really for TOUCH VIVA?
hi
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
s_p_mudakuzha said:
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Click to expand...
Click to collapse
Thats an old rom, we have more latest 1.35.720.1
Originally Posted by s_p_mudakuzha
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm 4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Thats an old rom, we have more latest 1.35.720.1
Sorry Mr. Jagan actually i was replaying to mr.menix , He is having problem after flashing this rom.
Alright, no need to be sorry.
thanks
thanks but is not working, i'v broken my phone with this version ROM.
For people who have issues with this ROM, flash a different ROM using the method described in the thread "HOW TO: Flash ROMS via an SD Card to your Opal".
This ROM was dumped from an HTC Touch Viva T2223 and is 100% original and untouched. I am not sure why this is not working for some of you. I have flashed this on my Viva twice now without any issues.
After flashing this ROM, I get the following:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0
jagan2 said:
Thats an old rom, we have more latest 1.35.720.1
Click to expand...
Click to collapse
Hi Jagan,
Where can i find the latest one? I mean 1.35.720.1.
ddl.team said:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0
Click to expand...
Click to collapse
Cannot apply stockspl. SPL 2.00.cmon still remains. I guess that is the problem, but I don't know how to revert to SPL 1.26. I tried everything, but 2.00.cmon is still there .
Thank you anyway.
Tools to dump ROM
Sorry if I am posting in the wrong thread, but are there any tools to backup the original SPL and ROM before we start flashing the cooked ROMS? As with this any unknown issues can be ruled out in case if we need to revert back to the stock ROM.
Thanks in advance.
Hi how do i go about flashing my HD2 back to stock English: 3.14.405.2 ROM ?! as i'd like to sell it now. i have an artemis rom, cotulla HSPL 2.08 and a splash screen from an old chucky ROm i'd like to get rid of !!
so how do i do this safely ?cheers dom
p.s will i still be able to boot into an sd build of android from a stock rom ??
into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes
Oh right thank you for your quick reply! I think I'll just flash a stock rom so I can sell the phone as unlocked! Thanks again for your help! !!
Sent from my HTC Desire using XDA App
onisuk said:
so I can sell the phone as unlocked!
Click to expand...
Click to collapse
you cant relock an unlocked phone anyway, no matter what you flash.
Dont confuse sim lock and rom lock, Totally unconnected.
a sim unlocked phone will still need hspl to flash, and a flashed phone isn't sim unlocked.
samsamuel said:
into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes
Click to expand...
Click to collapse
oh crap.
i just flashed straight back to stock without doing any of this... have i screwed up?
Also i did it because it keeps crashing and overheating so i was going to try it on stock and if it kept doing it i was going to send it back to htc - will they be able to tell i tried a custom rom?
(seems to be working fine though)
EDIT:
another question - will this have changed my radio back to stock too - or do I have to do this manually?
where can i download the new stock rom as the HTC site says its now for my phone....(probably because it was an O2 branded rom before)
theres an O2 update as well on the HTC website?
Otherwise the latest ones are on here:
http://forum.xda-developers.com/showthread.php?t=623283
I managed to sort mine - turns out you have to do it via SD and it does everything bootloader, ROM and radio. (although it failed the first time and i almost made a mess in my trousers)
If anyones interested the instructions are (taken from HSPL4 app):
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
I also formatted the SD before copying it over.
No there was only one for t mobile !
cheers for the link matey
yea its odd that, the o2 3.14 rom is there via direct link, has been since saturday, but still doesn't show if you navigate to the rom updates page on htc.uk
ok updated the hspl fine...but when i try to flash the new WWE rom i get an "invalid vendor id" at 1% and the flash fails
righty all sorted ! the O2 rom was on the UK site i was being dumb and look on htc Europe site !
all flashed and working fine now
Here you find some radio rom's for your hd7
[Update] now you will find a custom wrapper made by Dave shaw" attached to this post.
and here a link to Dave Shaw his thread where he share his wrapper to the world
http://forum.xda-developers.com/showthread.php?p=16460826&posted=1#post16460826
task 00 - this does not perform any kind of format after flashing a ROM.
This is the one you should use when flashing just Splash screens or Radios.
It saves you from having to restore all your data.
what to do with this:
1) download the attachment and extract (HD7_RUUWrapper_00)
2) download a radio you want to flash and extract.
3) copy the RUU_Signed.nbh from the stock folder (only for now, will update later)
4) bring phone in bootloader.
5) run ROMUpdateUtility.exe
6) follow instructions on screen.
7) run R/H spl again (this will change later when I updated the radios)
how to bring phone into bootloader mode:
(reboot while hold volume down button pressed). Connect to PC and wait for drivers to be installed. (USB appears on the bottom of phone screen) Than start updater to flash radio.
if you have a rom with a radio that isn't in this post please send me a download link
in the .rar we have:
nb folder (here you find the spl.nb and radio.nb)
Stock folder ( here you find the stock spl/radio.nbh)
XML folder (here you find a .xml with all the data from the 2 .nb files)
RUU_Signed.nbh (this is a radio only .nbh)
O2_DE_3.04.207.01_Radio_5.66.09.21a.rar Online.
http://hotfile.com/dl/126051344/13bdd33/O2_DE_3.04.207.01_Radio.rar.html
HTC_Europe_1.60.401.01_Radio_5.52.09.16.rar Online.
http://hotfile.com/dl/126052660/7210f63/HTC_Europe_1.60.401.01_Radio.rar.html
TMOUS_3.01.531.02_Radio_5.65.09.25a.rar Online
http://hotfile.com/dl/126116342/0c7c824/TMOUS_3.01.531.02_Radio_5.65.09.25a.rar.html
TMOUS_2.20.841.02_Radio_5.65.09.11a.rar Online
http://hotfile.com/dl/126114473/3837310/TMOUS_2.20.841.02_Radio_5.65.09.11a.rar.html
HTC_Europe_1.54.401.01_Radio_5.51.09.29.rar Online
http://hotfile.com/dl/126109079/59069fc/HTC_Europe_1.54.401.01_Radio_5.51.09.29.rar.html
Telstra_WWE_3.04.206.01_Radio_5.66.09.21a.rar Online
http://hotfile.com/dl/126112664/091ef3e/Telstra_WWE_3.04.206.01_Radio_5.66.09.21a.rar.html
O2_UK_1.68.206.03_Radio_5.63.09.13_3a.rar Online
http://hotfile.com/dl/126202114/5e48ff0/O2_UK_1.68.206.03_Radio_5.63.09.13_3a.rar.html
Telstra_WWE_1.50.841.02_Radio_5.61.09.15a.rar Online
http://hotfile.com/dl/126205305/0aa2586/Telstra_WWE_1.50.841.02_Radio_5.61.09.15a.rar.html
Remember you have R/H spl by Cotulla.
Remember that this will NOT reset the phone
Remember that if you take the radio from the stock folder that this will undo R/H spl so you have to run that again to
Thanks goes to:
Dave Shaw for making us a wrapper that doesn't hard reset.
xboxmod for helping me with almost everything
ondraster for the good chats (most things I really didn't understand )
updated the first post
I updated the first post with a ROMUpdateUtility.exe so that all can easy flash the radios to the phone
Thanks a lot for these Ceesheim. Wish I would've had these before I rolled all the way back to catch the firmware update from Tmob By the way, if we flash the new radio from Tmob, will it update all firmware that is in the actual update? I'm asking as I need to do a friends phone and would like to avoid rolling back just to get that done. Lastly, (and this is just to be sure), but will the phone really be hard reset from just flashing the radio (unlike it used to be on WM).
kwill said:
Thanks a lot for these Ceesheim. Wish I would've had these before I rolled all the way back to catch the firmware update from Tmob By the way, if we flash the new radio from Tmob, will it update all firmware that is in the actual update? I'm asking as I need to do a friends phone and would like to avoid rolling back just to get that done. Lastly, (and this is just to be sure), but will the phone really be hard reset from just flashing the radio (unlike it used to be on WM).
Click to expand...
Click to collapse
first
yes sorry , for now this will Hreset the phone because there is no public custom wrapper (one that does the task 32 instead of task 28)
"By the way, if we flash the new radio from Tmob, will it update all firmware that is in the actual update?"
do you mean a os update by ZUNE/MS/HTC ?
sorry don't know actually what you mean by this ?
but what this does is only updating the radio rom ( not the os and not the spl)
ceesheim said:
first
yes sorry , for now this will Hreset the phone because there is no public custom wrapper (one that does the task 32 instead of task 28)
"By the way, if we flash the new radio from Tmob, will it update all firmware that is in the actual update?"
do you mean a os update by ZUNE/MS/HTC ?
sorry don't know actually what you mean by this ?
but what this does is only updating the radio rom ( not the os and not the spl)
Click to expand...
Click to collapse
Ok, just wanted to be sure about the hard reset. And I mean there was an update from Tmob talked about here http://forum.xda-developers.com/showthread.php?t=1188563 and wanted to know, if you install the radio which comes from this firmware update, will all the components of the firmware be updated as well? Or is the firmware update, pretty much just an update to radio and that's it?
kwill said:
Ok, just wanted to be sure about the hard reset. And I mean there was an update from Tmob talked about here http://forum.xda-developers.com/showthread.php?t=1188563 and wanted to know, if you install the radio which comes from this firmware update, will all the components of the firmware be updated as well? Or is the firmware update, pretty much just an update to radio and that's it?
Click to expand...
Click to collapse
it will only change this "5.51.09.11a" to "5.65.09.25a_22.45.50.21U." part
or one you like
and if you look at the phone (on custom dft) you will see this 2250.21.30401.531.DFT
the number 2250.21.30401.531.DFT is just an identification number I think, it doesn't say anything about with build you have.
so if you ask me then if you only update the radio all would be ok.
edit:
lol, yes to me it looks like just a radio update, and you can take every radio you like my radio comes from this "http://forum.xda-developers.com/showthread.php?t=1183891" rom (I extracted it and removed the spl)
So im right in thinking the new custom RUU won't hard reset the device when flashing radios?.
Cheers kev
sutt359 said:
So im right in thinking the new custom RUU won't hard reset the device when flashing radios?.
Cheers kev
Click to expand...
Click to collapse
yes I am testing one as we speak but the problem is that it generate errors (and that isn't good for noobs )
and I can also tell you that the custom ruu is actually worked (no hard reset after radio flash )
but first the errors need to be fixed after that it will be posted on xda
i am trying to flash this "TMOUS_3.01.531.02_Radio_5.65.09.25a" on my HTC HD7 Tmobile.i am getting error 270 - update error
This is my phones Radio 5.54.09.21._22.33b.50.10U . I am not able to download through marketplace so i want to try different radio.
Im on CotullaHSPL 3.1
sagarjawaress said:
i am trying to flash this "TMOUS_3.01.531.02_Radio_5.65.09.25a" on my HTC HD7 Tmobile.i am getting error 270 - update error
Click to expand...
Click to collapse
when flash is at 100% then just remove batt
if it didn't update then use the radio in the stock folder and run r/h spl after flash one moer time .
ceesheim said:
it will only change this "5.51.09.11a" to "5.65.09.25a_22.45.50.21U." part
or one you like
and if you look at the phone (on custom dft) you will see this 2250.21.30401.531.DFT
the number 2250.21.30401.531.DFT is just an identification number I think, it doesn't say anything about with build you have.
so if you ask me then if you only update the radio all would be ok.
edit:
lol, yes to me it looks like just a radio update, and you can take every radio you like my radio comes from this "http://forum.xda-developers.com/showthread.php?t=1183891" rom (I extracted it and removed the spl)
Click to expand...
Click to collapse
Ok, got you. I'm sure there has to be something else in the firmware update besides the radio, but probably doesn't matter much anyways. Can't wait for the custom wrapper either
kwill said:
Ok, got you. I'm sure there has to be something else in the firmware update besides the radio, but probably doesn't matter much anyways. Can't wait for the custom wrapper either
Click to expand...
Click to collapse
hey Kwill , look at first post
The TMOUS update you're talking about included driver updates to fix the HTC Pink Camera issue. So, flashing just a radio ROM from here will not help. Flashing a custom ROM may undo this as well as I don't know if the custom ROM's have the updated drivers.
Expriences
Hi!
I was just wondering if I flash the RUU_signed.nbh from the root folder the Cotulla HSPL remains in place. Which is really true but the phone cannot start: it keeps returning back to the BootLoader.
This is easy to resolve: Flash RUU_signed.nbh from stock folder of the archive as it is described in the first post. Cotulla HSPL is gone but ROM and data is intact. .
Hope there will be a fix for keeping HSPL in place.
Anyway this is far more easy now to upgrade my radio. I thanked every post by ceesheim here. (I hope I won't get in to trouble with that. )
Really thank you guys.
Cina.
As seen in many Android XDA forums with modem, this thread is stuck now.
Btw, nice job , a well made thread, i've found it so understandable.
ceesheim said:
hey Kwill , look at first post
Click to expand...
Click to collapse
Aha! Thanks ceesheim and definitely thanks to Dave for the custom wrapper!
drkfngthdragnlrd said:
The TMOUS update you're talking about included driver updates to fix the HTC Pink Camera issue. So, flashing just a radio ROM from here will not help. Flashing a custom ROM may undo this as well as I don't know if the custom ROM's have the updated drivers.
Click to expand...
Click to collapse
Ok, that's what I was afraid of (there being something that wouldn't update with the firmware update). Guess I'll take my friends phone through the rollback and update him that way. Thanks drkfngthdragnlrd for chiming in on that one.
cina said:
Hi!
I was just wondering if I flash the RUU_signed.nbh from the root folder the Cotulla HSPL remains in place. Which is really true but the phone cannot start: it keeps returning back to the BootLoader.
This is easy to resolve: Flash RUU_signed.nbh from stock folder of the archive as it is described in the first post. Cotulla HSPL is gone but ROM and data is intact. .
Hope there will be a fix for keeping HSPL in place.
Anyway this is far more easy now to upgrade my radio. I thanked every post by ceesheim here. (I hope I won't get in to trouble with that. )
Really thank you guys.
Cina.
Click to expand...
Click to collapse
Where is the stock folder of the archive which contain RUU_signed.nbh located.I need to deinstall my HSPL.
Hi, I've read the instructions a few times, but I guess I'm missing something. I keep getting the attached Error when I run it. My phone does the have the HSPL also.
Thanks
i am on asia HD7 Singtel
i would suggest not flashing this thing onto yr phone because a while back i recenived the same HTC firmware update available to Tmous users.
the htc update updates the radio to 5.65. and we arent sure if it contains other enahncements, bug elimination or any other improvements
Ttblondey said:
Where is the stock folder of the archive which contain RUU_signed.nbh located.I need to deinstall my HSPL.
Click to expand...
Click to collapse
You should download any Radio ROM archive from the first post than extract it. Inside you can find three folders. Or of them (stock) contains RUU_signed.nbh you're searching for. Use that for flashing.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?