Database Users

artemis USPL - improvements

I was asked to patch USPL for ROM size checking when flashing via RUU, so this version does not check size even when flashing via USB. (original SPL skips the size checks only when SD flashing.)
I did this a few days ago, but didn't get around to posting it
download from attachment, enjoy! donations are always appreciated to the "To Cmonex" link in my signature
how to use it: if you already have a version of artemis USPL installed, simply flash this new version using RUU or from SD (ARTEIMG.NBH on FAT32 formatted SD)
in bootloader (tricolour mode) it should then say version: 1.11.cmon
for instructions on installing any USPL if you have no USPL yet - check out: http://forum.xda-developers.com/showthread.php?t=311403 until I have more time/motivation for userfriendly packaging
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)

Well done Cmonex..!
Thanks so much.
Peoples of Artemis forum wait it long times already.
Thread Sticked.
Cheers ..!

cmonex said:
.......
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)
Click to expand...
Click to collapse
Then with full HSPL, i see a lot of bricks coming to "life".
Hope u get motivated enough.
Thanks Cmonex, excelent stuff.

Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?

it's the same process.
The difference is that you can flash any rom without size limits.
Before you only could do this with SD Card method.

not working
its not working
it gives the same error : invalid size
canu explain step by step plzzzz

Is you bootloader showing SPL 1.11.cmon?

i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes

And where is the response to my question? ....

drlalitbida said:
i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes
Click to expand...
Click to collapse
you need to enter the tricolour screen to check version.

fhcoolos said:
Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?
Click to expand...
Click to collapse
does artemis have an issue with vista? tell me what kind of problem please

thats what i have written
no bootloader screen comes in between the upgrade process

drlalitbida said:
thats what i have written
no bootloader screen comes in between the upgrade process
Click to expand...
Click to collapse
you have to manually go to bootloader to flash the image

cmonex said:
does artemis have an issue with vista? tell me what kind of problem please
Click to expand...
Click to collapse
Usb drivers while u enter bootloader.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Cheers.

I want to thank you very much for this useful work. However I couldn't try it yet Because at the end of the rom update utility application (I mean %100) it gives a error 270 udate error image file corrupted. Please check your update utility I have tried all these attempts while my phone is at the bootloader mode.
Thank you in advance

Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?

oh！thanx！it's funny！

sean777 said:
Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?
Click to expand...
Click to collapse
Yes. All other files are the same.. infact you need to because zip does not have start_uspl.exe

need urgent help........
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...

Hello!
Is there any way to load USPL from bootloader (without ActiveSync)?
Regards!

rom re boot steps

Hi XDA developer
I need help as my HTC HD2 MOBILE is not reboot I have tried the hard reboot and nothing happens.
two questions;
1. if i was to install a new verison of the rom Altermis v 26. which i have downloaded there is a another software called SSLD that I also need to download where is this. And how do i do this.
2. what happens if i cannot reboot the phone TOTALLY - in order to get to the operating screen where i can restore factory settings. I have also done a soft reset and still cannot getting into the phone.
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
HELP!!!!!!!!!!!!!!!!! PLEASE

keilah said:
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
Click to expand...
Click to collapse
did you flash a custom rom before this happened? If so, it is likely that you forgot to update to a compatible radi. Look through the thread for the rom you downloaded for details.

Hi
oK I under stand but if you was intsalling Altermis v26 on your phone.....there is a additional file where youy down load the software before transferring to your phone what is that software??????
please callled and where can i downlaod this

do you mean hspl? see my sig

yes
if that allows you to download "software" to the HTC HD2 device....and can you kindly please post the link here. and any steps i need to be aware off as i am new to this site.
Once again may thanks for all your feedback and assistance.....

the link is in my signature
"One HSPL3 to rule them all - all leo's supported, all spl inc tmous 2.10.0000"

[NoDo ROM]HD7_O2_DE_1.69.401.01_Radio_5.54.09.21_22.33b.50.1 0U_NoDo, by ansar

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_O2_DE_1.69.401.01_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_O2_DE_1.14.207.01_Radio_5.51.09.06a_22.30.50.09U
2. RUU_Schubert_O2_DE_1.61.207.01_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.207 i.e. with characteristic value 207
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_O2_DE_1.69.401.01_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_O2_DE_1.69.401.01_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar

Didn´t work for me. After procedure I got an 1.61 Rom with Sys 7004 ! :-s
No Nodo

tonarm said:
Didn´t work for me. After procedure I got an 1.61 Rom with Sys 7004 ! :-s
No Nodo
Click to expand...
Click to collapse
****, same here...
@ansar: whats wrong with the ROM?, did you sign the wrong one...

same here

tonarm said:
Didn´t work for me. After procedure I got an 1.61 Rom with Sys 7004 ! :-s
No Nodo
Click to expand...
Click to collapse
4irm said:
****, same here...
@ansar: whats wrong with the ROM?, did you sign the wrong one...
Click to expand...
Click to collapse
NePheus said:
same here
Click to expand...
Click to collapse
Hi,
There are only three NoDo ROMs:
> HTC_Europe 1.69.401.01
> Telstra 2.20.841.02 and
> TIM_IT 1.70.901.02
Not an 1.68.206.03
Probably you did see the cheese but not the trap
Till next April enjoy!!!
Well which one of the above NoDo you want to see in your O2_DE brand?
Regards, ansar

ansar.ath.gr said:
Hi,
There are only three NoDo ROMs:
> HTC_Europe 1.69.401.01
> Telstra 2.20.841.02 and
> TIM_IT 1.70.901.02
Not an 1.68.206.03
Probably you did see the cheese but not the trap
Till next April enjoy!!!
Well which one of the above NoDo you want to see in your O2_DE brand?
Regards, ansar
Click to expand...
Click to collapse
HTC_Europe 1.69.401.01 of course (nearest to Germany)
and thank you for flashing my phone for nothing... again!

Hi,
See post #1 and enjoy!!
Regards, ansar

hey Ansar i hv flashed your latest rom with 1.69 on my o2 DE HD 7.
i did as u wrote
1. Installed B.1, my phone restarted after finish and went into Bootloader as u said.
but in Step
2. I installed B.2 but it always break with 1% and reststart> bootloader with some error.
Helpppppppp

Manusonya said:
hey Ansar i hv flashed your latest rom with 1.69 on my o2 DE HD 7.
i did as u wrote
1. Installed B.1, my phone restarted after finish and went into Bootloader as u said.
but in Step
2. I installed B.2 but it always break with 1% and reststart> bootloader with some error.
Helpppppppp
Click to expand...
Click to collapse
Hi,
May be O2_DE operator, like TMOUS, is using a multi protection system
I did re-upload all files to verify the unbranding process
You must also verify by following these steps:
> Flash a branded A.1 or A.2 ROM
> Delete all previous downloads
> Download again B.1, B.2 files and
> Start the unbranding process
Let me know if everything is ok
Regards, ansar

Hey ansar,
file B1 is deleted by the owner, can you reupload it?
Greets

NePheus said:
Hey ansar,
file B1 is deleted by the owner, can you reupload it?
Greets
Click to expand...
Click to collapse
Hi,
Can you re-try?
Regards, ansar

Working, Thanks!

bump 4 reupload
b1.
RUU_Schubert_O2_DE_1.69.401.01_Radio_5.54.09.21_22 .33b.50.10U_NoDo_by_ansar
pls
wow, ansar is faaaaaaaaast . THX

NePheus said:
Working, Thanks!
Click to expand...
Click to collapse
p0c4 said:
bump 4 reupload
b1.
RUU_Schubert_O2_DE_1.69.401.01_Radio_5.54.09.21_22 .33b.50.10U_NoDo_by_ansar
pls
wow, ansar is faaaaaaaaast . THX
Click to expand...
Click to collapse
Hi,
Now check for receiving the MS NoDo 7390 too!!!
Thnx for commenting and supporting!!!
Regards, ansar

Just installing the 7390. Thanks!

NePheus said:
Just installing the 7390. Thanks!
Click to expand...
Click to collapse
Hi,
Any comments after installation of 7390?
Regards, ansar

Still everything OK!

hey workin everythin fine after your re-install instructions.
Thanks

so this rom work for the hd7 with tmobile? there is no issues? copy and paste?

NePheus said:
Still everything OK!
Click to expand...
Click to collapse
Hi,
Thnx for commenting!
Regards, ansar

Help me please

Help me please and fast .. am in need .. i tied to uninstaller the HSPL everything done step by step.. but just after the black screen with the warning sine i get an error saying not allowed and the auto restart to Bootloader witch says Upgrade ROM code error Please try again... What now ?

First off what version of the HD2 do you have TMOUS or international? Second what ROM are you trying to flash and how are you flashing it via USB or SD card?

why are you trying to unistal HSPL man , if you want to put back the original spl you just flash original WM Rom

T-Macgnolia said:
First off what version of the HD2 do you have TMOUS or international? Second what ROM are you trying to flash and how are you flashing it via USB or SD card?
Click to expand...
Click to collapse
I have bought my HD2 From Greece i tried installing the World Wide English (WWE) 3.14.405.2 Rom .. After have downloaded it i got the RUU_signed.nbh copied it to the sd card rename it to leoimg.nbh ( i think that was it) and booted the phone to Bootloader .. from there it started the procedure and then got the error !!

isark said:
I have bought my HD2 From Greece i tried installing the World Wide English (WWE) 3.14.405.2 Rom .. After have downloaded it i got the RUU_signed.nbh copied it to the sd card rename it to leoimg.nbh ( i think that was it) and booted the phone to Bootloader .. from there it started the procedure and then got the error !!
Click to expand...
Click to collapse
Sounds like you got the wrong ROM for your phone, go to the HTC.com and enter your serial number from your HD2 and download the ROM it says you can download. Also make sure you are on the HTC site that is for your country or the country the HD2 originally came from.

T-Macgnolia said:
Sounds like you got the wrong ROM for your phone, go to the HTC.com and enter your serial number from your HD2 and download the ROM it says you can download. Also make sure you are on the HTC site that is for your country or the country the HD2 originally came from.
Click to expand...
Click to collapse
Okay thanks for your time and everything this was the problem . you were correct .. so the thing to do now is to do the same steps with the correct rom i have downloaded .. ?? Am i correct ?

isark said:
Okay thanks for your time and everything this was the problem . you were correct .. so the thing to do now is to do the same steps with the correct rom i have downloaded .. ?? Am i correct ?
Click to expand...
Click to collapse
Yes take the same steps and change the name of the .nbh file to leoimg.nbh (it is not case sensative so LEOIMG.nbh works as well. This should have you completely back to stock once the ROM is flashed.

HTC Trophy - NEED FULL FLASH

Hi, guys.
I have real problems with my Trophy. My English is not so good, but i try to explain my problem:
1. I had HTC_Trophy with Spanish vodaphone(vodaphone logo when system starting), but it seems unlocked, because i can use it in Uzbekistan.
2. Bootloader version was 5.12.xx, and i wanted to downgrade it. I wanted to install on my phone DFT v4.
3. I done it by GoldCARD, and i got message radio update failed , update failed (in red).
After this problem i can't install any ROM's, even original SPAIN. It give me error 226: Flash Write Error on 10%. Only DFT Roms installing fully, but after rebooting device i get 7 vibro signals(anybody know what means this error 226, and 7 vibro signals).
Than my friend installed in my device Full Flash (Model ID: SPAR1000, i have Model IDC401000) by Riff Box J-tag. And my device turned ON. But camera still not working, i think that it cause wrong Model id.
And one thing else, when i wanted to install Radio separately by RUU, i've got the same Error: 226 on 98%. Well i think that something wrong with my Radio module.
Any IDEAS???
P.S. Anybody, please give me FULL FLASH for my trophy, with Model IDC401000, for Riff Box J-Tag. I really need it.
P.S.S. Languages I understand: Русский, English, Türkçe, Uzbekcha.
Thx!!!

HTC_Trophy said:
Hi, guys.
I have real problems with my Trophy. My English is not so good, but i try to explain my problem:
...........................................
Any IDEAS???
P.S. Anybody, please give me FULL FLASH for my trophy, with Model IDC401000, for Riff Box J-Tag. I really need it.
P.S.S. Languages I understand: Русский, English, Türkçe, Uzbekcha.
Thx!!!
Click to expand...
Click to collapse
Probably you have the wrong rom ....
See here how to find the rom for your trophy
http://forum.xda-developers.com/showthread.php?t=924333

What i had:
Firmware revision number: 2250.21.51201.164
Bootloader version: 5.12.2250.1
164 - Vodafone_SPA operator, with CID VODAP304
I've tried to install this version, but it failed: ERROR 226: Flash Write Error.

Try building a GoldCard, and then install the Euro Spark rom into your phone using GoldCard method. This will also change its CID at the same time, and make it possible to downgrade SPL and install HSPL (custom roms).

Dear TheXev, thx for answer!!! Could you post the link for Euro Spar rom that i have to install in my device. P.S. THX!!!

HTC_Trophy said:
Dear TheXev, thx for answer!!! Could you post the link for Euro Spar rom that i have to install in my device. P.S. THX!!!
Click to expand...
Click to collapse
RUU​_Spark​_HTC​_Europe​_1.10​.401​.04_Spark​_5.52​.09_RELEASE​.exe is the name of the rom, it can be found in football's Spark/SparkW rom thread. Remember, this rom might not have the launage pack you want, but you can use it as a path to installing HSPL, and then a custom rom with the language you want!

Dear TheXev, after pluging in the gold card, my device have freezed on Checking mode after Loading.??? And any ROMs - result the same.??? THX.

HTC_Trophy said:
Dear TheXev, after pluging in the gold card, my device have freezed on Checking mode after Loading.??? And any ROMs - result the same.??? THX.
Click to expand...
Click to collapse
First rename rom on sdcard, THEN install goldcard bootloader. It seems that if you don't have the file name ready before installing the bootloader, it doesn't work right. I never had this issue, but I'm also sure I put the image on before I installed the goldcard bootloader to the SD card.
Remember, this image may not have your language pack, but you can install a custom rom after doing this.
So long as the GoldCard screen tells you it is checking the image, it should be okay. Flashing with GoldCard can take 20mins to a half-hour.
Even though I have done GoldCard on SparkW (not Spark like you), i named my image with all capital letters. SPARIMG.NBH is what I would try.
Also, maybe RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.2 9_22.32.50.10U_by_ansar (from that ansar thread someone linked you too earlier) would be a better image to try for the downgrade.