I have a
Western Digital 3TB Mybook Essential USB 3.0 External HDD
The problem is, that the A500 will not accept this drive connected via USB.
Do anyone have an ida with such a large HDD.
A 2TB HDD has no problem.
Is the drive formatted as fat32?
size is not the issue
Depends on format. If you do not have root access, the USB drive is only mountable if it is FAT/FAT32 file system. If it's NTFS you will need root and a external app (I use Drive Mount, free from market) to be able to use said external HDD
entropy.of.avarice said:
Depends on format. If you do not have root access, the USB drive is only mountable if it is FAT/FAT32 file system. If it's NTFS you will need root and a external app (I use Drive Mount, free from market) to be able to use said external HDD
Click to expand...
Click to collapse
With Drive Mount the Drive is recognized but it will not mount the drive.
The drive is formatet with the tool from WesternDigital.
hochgattererjohann said:
With Drive Mount the Drive is recognized but it will not mount the drive.
The drive is formatet with the tool from WesternDigital.
Click to expand...
Click to collapse
Hmmmm. Can you hook it up to your PC and check it's properties? What format is it even in?
The drive mount tool shows the drive, but "mount all" fails?
Does the drive actually work on a USB2 port?
over 2,19TB needs Advanced Format
Hi,
I read in one of the computer magazines that MBR (master boot record) only works for drives up to 2.19TB in size, bigger requires this new Advanced Format Support . Win7 SP1 includes this by defauilt I believe. Could be the case for the Iconia that the size is simply too big and that this AF is not (yet) supported ...
just my2 cents,
Marcher
entropy.of.avarice said:
Hmmmm. Can you hook it up to your PC and check it's properties? What format is it even in?
The drive mount tool shows the drive, but "mount all" fails?
Click to expand...
Click to collapse
Windows report NTSF and drive mount shows the drive but "mount all" fails
FloatingFatMan said:
Does the drive actually work on a USB2 port?
Click to expand...
Click to collapse
Yes it works without a problem on a USB2 port on my PC
When you connect to pc does it shows like 2 drivers letters or only 1, if shows 2 that's your problem there is utility on wd site how to reconfigure to show 1 drive.
Sent from my SPH-D700 using XDA App
does it have a virtual drive. I am not familiar with wd drive but my iomega ego came with a virtual cd drive with the encryption program and drive mount won't work. But the version 1.2 works
http://forum.xda-developers.com/showpost.php?p=13337600&postcount=6
Just found out the name of the program wd its wd smartware. Below are link on how to disable them.
http://wdc.custhelp.com/app/answers/detail/a_id/3835
hochgattererjohann said:
Windows report NTSF and drive mount shows the drive but "mount all" fails
Yes it works without a problem on a USB2 port on my PC
Click to expand...
Click to collapse
If it is formatted NTFS and you have a stock A500 that is your problem. You need to format it as a FAT32 drive. You cannot do this through drive management in Windoze 7 (as far as I know) - you need to use a third party application or root your A500 and perform the necessary mods.
Once you root, you can use this.
I had success with the following utility and my 500GB NTFS-formatted external:
http://forum.xda-developers.com/showpost.php?p=13337600&postcount=6
Hope this helps.
NTFS is the norm for External Hard Drives
External Hard Drives all come formatted NTSF. FAT32 is only used on thumb drives less than 16GB large. A file cannot be larger than 4GB on a FAT32 formatted drive and seeing how there are many files(VOB, ISO, MP4) that are larger than 4GB, most people don't think to format their drives to FAT32. If you have a Windows PC you can use an easy program you can find HERE to format your hard drive to FAT32
Ran into a similar problem with my new 1TB WD Passport.
Drive mount sees it and mounts it, but then I don't see the drive contents in root explorer.
strider_mt2k said:
Ran into a similar problem with my new 1TB WD Passport.
Drive mount sees it and mounts it, but then I don't see the drive contents in root explorer.
Click to expand...
Click to collapse
Have you checked all the directories under /mnt? I haven't had an issue, just tested with a 1TB as well.
Sent from my A500 using Tapatalk
I use WD 1TB HDD that's formated in NTFS and it does have the virtual drive as when mounted on PC there are two drives mounted.
However I have no problem to mount it on my A500 using the DriveMount. From memory it mounted as sd1(?) under /mnt/...
Just stick the cable to A500 USB port and click the mount all.
I tryed all what here was suggested.
I also splitted the drive in an 2 TB and a 1TB partition.
NTSF-Mount recognized this but didn't mount the two drives.
Has anybody other experiences?
hochgattererjohann said:
I tryed all what here was suggested.
I also splitted the drive in an 2 TB and a 1TB partition.
NTSF-Mount recognized this but didn't mount the two drives.
Has anybody other experiences?
Click to expand...
Click to collapse
Are you rooted? Rom version? What third party tool are you using to mount the drive? Need more details to help you.
entropy.of.avarice said:
Are you rooted? Rom version? What third party tool are you using to mount the drive? Need more details to help you.
Click to expand...
Click to collapse
I am rooted
I tried drive mount and ntsf mount. Drive mount recognize the drive but do not mount. ntsf mount sometimes mount the drives (I think when i start the pad the last 10 minutes) and do not mount when I plug in the drive.
I use the "[ROM] Honeycomb 3.1 - HoneyVillain 1.05 with 2.5 Kernel)
With 3 TB I had no chance to mount. With splitting it seems that ther are some possibilities but I didnt know at this time what really happens.
hello
i installed tboony rom and when i connect my hdd i see only one partition of it 134 mb...how to formatt it so i can see all the hard drive ?it also comes with 1 partition of wd that is 690 mb and i can't format it
thanks
I7210I said:
hello
i installed tboony rom and when i connect my hdd i see only one partition of it 134 mb...how to formatt it so i can see all the hard drive ?it also comes with 1 partition of wd that is 690 mb and i can't format it
thanks
Click to expand...
Click to collapse
The part of the hard drive that it is reading is the section that is formated fat.
The whole drive needs to be format fat.
Or go to the market and download drive mount and it will let your device read ntfs formated hard drives.
So choice is format all in fat, and don't need drive mount to read drive or
install drive mount to read ntfs formated drives.
I7210I said:
hello
i installed tboony rom and when i connect my hdd i see only one partition of it 134 mb...how to formatt it so i can see all the hard drive ?it also comes with 1 partition of wd that is 690 mb and i can't format it
thanks
Click to expand...
Click to collapse
If you installed a taboonay v2.0, it has a built in drive mount, try to mount your drive via drive mount...
i encountered a problem with my external USB 3.0 disk, shield tv won't recognise the disk. its formatted in NTFS in just one partition. In settings > storage the usb drive is greyed out and it says "unsupported file system, or drive is blank", which isnt the case.
i tried to format the disk to several formats shield tv is able to access (i.e exfat, fat 32, ntfs), i also did a full format of the external drive (removing mbr and all partitions)... didnt solve the problem.
and to be sure that its not a controller problem, i hooked another hard disk on the same usb 3.0 controller and everything is working fine.
so i guess its a problem with the drive (seagate momentus thin 500GB), but it works on any other device except the shield TV.
any ideas?
well... found a solution now: i did a full low level format of the disk (not just the fast one with mbr/partition removal), formatted it as ex-fat with win 10. after that shield tv was able to mount it. then i erased the drive in settings > storage, removed it safely and copied the files back on with my computer. now it seems to work as it should.
problem solved
Is it possible to get 128GB flash drive working as internal storage in marshmallow? I formatted my pny 128GB flashdrive to fat32 using diskpart and when I try to format it in nexus player to use as internal storage, it quits after around 5 mins saying that it couldn't format the drive. I currently have a 16gb driver as internal storage and it's running out of space. Also I'm using a USB hub with a otg cable if that helps. Any help would be appreciated.
Thanks.
I am using an old 250gb sata HDD via a hub with eithernet and it works. Esfilemanager will sometimes crash it requiring a hard reboot to reactivate it but do far so good.
Did you format it in Android so that you can use it as internal storage? I can plug it in as removable storage but can't use it as internal storage.
Make sure you partition as FAT 32 and Master Boot Record instead of GUID Partition or Apple Partition Mac, just to make sure. And remember that FAT 32 won't handle files larger than 4GB, so keep that in mind. If you have the need to use larger than 4GB files you can format the drive to NTFS on Mac using the Tuxera driver or any other third party NTFS driver; Android does read NTFS partitions.
nd4spdviper said:
Make sure you partition as FAT 32 and Master Boot Record instead of GUID Partition or Apple Partition Mac, just to make sure. And remember that FAT 32 won't handle files larger than 4GB, so keep that in mind. If you have the need to use larger than 4GB files you can format the drive to NTFS on Mac using the Tuxera driver or any other third party NTFS driver; Android does read NTFS partitions.
Click to expand...
Click to collapse
I formatted it as fat 32 and MBR using partitionwizard and still having the same issue. Does anybody have any other suggestions that can fix this?
I formatted my 128gb usb stick to a NTFS files system in a windows machine and then as "internal" in the Nexus Player.
I tried with a 16gb flash drive and 1tb USB hard drive and was able to use any as internal storage. As a matter of fact, the 1tb drive had 3 partitions and the Nexus wiped them for or good and used the entire tera as internal storage.
Hi,
Same problem for me with a 64GB kingston flash drive ... The nexus player fails to format the key as an internal storage. If I try to format as a general USB storage it works, and my key become a 64GB external storage in FAT32 (but useless for me, I have to store big files > 4GB ...). So i want to use it as an internal storage.
Any ideas why the internal storage format option goes into error ?
ichi11 said:
Hi,
Same problem for me with a 64GB kingston flash drive ... The nexus player fails to format the key as an internal storage. If I try to format as a general USB storage it works, and my key become a 64GB external storage in FAT32 (but useless for me, I have to store big files > 4GB ...). So i want to use it as an internal storage.
Any ideas why the internal storage format option goes into error ?
Click to expand...
Click to collapse
I have exactly the same problem.
Perhaps it depends on the flash drive model ? Does people getting it working can share their flash drive model ? (I don't want to buy 50 flash drive before I can expand the internal storage ... )
For me, this flash drive doesn't work : Kingston DataTraveler Micro 3.1
Hi all I've got a mojo rooted running cm12
I've enabled r/w but can't get my harddrive to work
I have a 3tb seagate powered drive and a 500gb in a cheap USB hub
The drives don't show up in setting but I can see them in es file explorer
When I try to copy anything to the drives it fails
I've formatted the drives with partition magic 9 to ntfs
And fat32 with same results unsure what to try next
Any help please