Please is here someone who doesn't hear a click or 1/2sec drop in jpB during the call ?
not development related moved to general
I think we are many people having this issue ..
We already discussed it here
Not just in calls, in music player too (clicking).
Szaby59 said:
Not just in calls, in music player too (clicking).
Click to expand...
Click to collapse
shtt, so I must or downgrade or upgrade ((
but I was listening FM Radio and there I didn't hear this new Samsung feature
dwarfuy said:
I think we are many people having this issue ..
We already discussed it here
Click to expand...
Click to collapse
yes I know, I follow this topic, but please had anyone find out how to fix it ? May be the fix lasts less hours than downgrade. IF there is a fix.
Not always, mostly when data connection is enabled.
I think the new "modem" driver has a new "feature"...
I flashed back to jpa, waiting for jpc.
Szaby59 said:
Not always, mostly when data connection is enabled.
I think the new "modem" driver has a new "feature"...
I flashed back to jpa, waiting for jpc.
Click to expand...
Click to collapse
Thanks Szabi, I was testing:
I had switched off the MODEM (gprs/3g)
In music player (mp3) and FM Radio it's OK - no clicking.
In phone it's clicking even if I switch of the data.
So it's a problem of phone. I use aTAKEohONE, so it's a problem of this build.
I did some changes in call settings - if some succsess I will let you know.
the clickety click got really annoying..going back to stock rom for the moment..really hope JPC comes out soon..too bad, i was starting to get used to froyo..
btw can we mix diff modem.bin files??..this one had a XXJP2 as a baseband..i never used JPA or earlier versions, what was the baseband version for those? Just in case the problem was with the modem..maybe we just need a different baseband..i am just guessing here..
I was also thinking about taking the modem.bin from JPA and putting it in JPB but I guess its dangerous. ...
Sent from my GT-I5800 using XDA App
dwarfuy said:
I was also thinking about taking the modem.bin from JPA and putting it in JPB but I guess its dangerous. ...
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
so in JPA it was correct. Strange... Does they have some testing scenarious or how and how is preparing / testing these leaked roms ? Are they leaked or developed outside of Samsung ?
Anyway please if someone knows hot to eliminate / stop this "click" during the call please let us know. I was changing settings but nothing helped.
I give up... I go to jpA
I think the problem is from modem.bin of JPB.
I tried update only modem.bin of JPA, JG2(2.1), JG3(2.1) into JPB-phone and clicking sound problem fixed. Then tried update modem.bin of JPB back again, same problem found.
Now I'm using JPB with modem.bin from JG2 because I figured that when I talk in speaker mode, JG2 is louder than JPA.
My current version
Firmware version: 2.2
Baseband version: I5801DXJG2
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.XXJPB
sirawut said:
I think the problem is from modem.bin of JPB.
I tried update only modem.bin of JPA, JG2(2.1), JG3(2.1) into JPB-phone and clicking sound problem fixed. Then tried update modem.bin of JPB back again, same problem found.
Now I'm using JPB with modem.bin from JG2 because I figured that when I talk in speaker mode, JG5 is louder than JPA.
My current version
Firmware version: 2.2
Baseband version: I5801DXJG2
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.XXJPB
Click to expand...
Click to collapse
I have a JG6..i am gonna try with that..will post how it goes..
just wanted to say..flashed JPB and then flashed it with modem.bin for DDJG6..been using for about a day now, rooted with superoneclick ..everything seems fine upto now..and clickety click is gone..
Can someone please tell me how I can flash only the "modem.bin" file..??? I know it's to be done with Odin.. But I wanna know which Image should I load it in..
Plus what should be checked and what should not be checked??
Related
SamFirmware just tweeted:
FIRMWARES: Samsung I9100XWKFI, I9100BUKE5, I9100TDUKE6 Online! (Android 2.3.3)
http://twitter.com/#!/SamFirmware
Looks like KF1 is still 2.3.3 and not the 2.3.4 update we have been waiting for
Hopefully our update will come soon and sort out all of the battery drain issues.
Hope this helps.
Something IS happening finally ;-) samsung makes imho the best phones but when it comes to firmware they kinda like to hesitate...still thumbs up. Hopefully they fixed the gps issues for germany.
Cheers
Sent from my GT-I9100 using XDA App
Which gps issues? I didn't mention any... my accuracy is abot 10m and that's imho awsome?
Does anyone upload the new firmware for xda? Gonna test it.
Sent from my GT-I9100 using XDA App
thx 4 the new, im downloading right now!!
I wish Vodafone ES would update their KE1 OS (--
Where can we find it? Do i have to register on samfirmware forums?
jojo2peter said:
Which gps issues? I didn't mention any... my accuracy is abot 10m and that's imho awsome?
Does anyone upload the new firmware for xda? Gonna test it.
Click to expand...
Click to collapse
Ok lately they are gone but from time to time gps is a ***** here O i had it a couple of times that i had to reboot the device to be able to use navigation. Still didnt work sumtimes. Kinda disappeared after updating to lightening 1.3...But still: galaxy s2 kicks ass!
Sent from my GT-I9100 using XDA App
download I9100XWKF1
I9100XWKF1 download link:
http://hotfile.com/dl/120764162/0c064b1/I9100XWKF1.rar.html
pass:
Code:
samfirmware.com
Important: If you don't know what you are doing, so don't download it!!
haasgo said:
Ok lately they are gone but from time to time gps is a ***** here O i had it a couple of times that i had to reboot the device to be able to use navigation. Still didnt work sumtimes. Kinda disappeared after updating to lightening 1.3...But still: galaxy s2 kicks ass!
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Didn't have these issues, I've never had to restart the phone, except yesterday, when i set my device-font to the original one, because the font had a border, after a restart it hadn't the border anymore .
Btw: I thought the navigation is using the gyroscope for tunnels, to get the position without gps, but with the google navigation it isn't working... didn't test it on offline navigations, did anyone?
Anyone knows if swedish languages in included?
ams84 said:
I9100XWKF1 download link:
pass:
Code:
samfirmware.com
Click to expand...
Click to collapse
If I currently have an Australian Phone release, is this what i'd need?
My details on the 'about phone' are:
Baseband: I9100XXKE4
Build number: GINGERBREAD.XWKE7
Android version: 2.3.3
Also, do i just use odin like i did with XE7 and flash the firmware that way?
Thanks guys,
Chris
What ist I9100BUKE5, I9100TDUKE6 ?
BU = Vodafone?
and TDU = ?
yaggy85 said:
If I currently have an Australian Phone release, is this what i'd need?
My details on the 'about phone' are:
Baseband: I9100XXKE4
Build number: GINGERBREAD.XWKE7
Android version: 2.3.3
Also, do i just use odin like i did with XE7 and flash the firmware that way?
Thanks guys,
Chris
Click to expand...
Click to collapse
I9100XWKF1 it's an European firmware
ams84 said:
I9100XWKF1 download link:
http://hotfile.com/dl/120764162/0c064b1/I9100XWKF1.rar.html
pass:
Code:
samfirmware.com
Click to expand...
Click to collapse
Thank you though, but u gotta say, that nobody should use the pit file :-S
// I'm mentioning a small fading, when i'm locking the screen in KF1
does this one wipe ?
ams84 said:
I9100XWKF1 it's an European firmware
Click to expand...
Click to collapse
So does that mean I can flash to this new firmware yet.. or?
I flashed to KE7 using this thread:
http://forum.xda-developers.com/showthread.php?t=1075278
I then downloaded this file:
Generic XEU: XWKE7
MD5: F388DB98FC83861C2F22E607AE940DBB
jojo2peter said:
Thank you though, but u gotta say, that nobody should use the pit file :-S
// I'm mentioning a small fading, when i'm locking the screen in KF1
Click to expand...
Click to collapse
edited thx
yaggy85 said:
So does that mean I can flash to this new firmware yet.. or?
I flashed to KE7 using this thread:
http://forum.xda-developers.com/showthread.php?t=1075278
I then downloaded this file:
Generic XEU: XWKE7
MD5: F388DB98FC83861C2F22E607AE940DBB
Click to expand...
Click to collapse
you can flash this without problems, but I didn't use the included .pit file, i guess we shouldn't ^^
Hey,
does anyone tried to root the phone after the update? And is it a wipe-update?
jojo2peter said:
you can flash this without problems, but I didn't use the included .pit file, i guess we shouldn't ^^
Click to expand...
Click to collapse
What s the matter with flashing a PIT ? It wipes everything ?
I won't post the link in here, you can get it from the firmware thread in the dev forum. You can thank TheMegaStar for that as he seems incapable of going to another thread to read before he downloads and flash anything or to decipher the firmware components from the name.
Anyway, discuss your finding and observations of XWKJ1 in here.
Intratech said:
I won't post the link in here, you can get it from the firmware thread in the dev forum. You can thank TheMegaStar for that as he seems incapable of going to another thread to read before he downloads and flash anything or to decipher the firmware components from the name.
Anyway, discuss your finding and observations of XWKJ1 in here.
Click to expand...
Click to collapse
Fully understand. Its the same thing everytime new firmware is released.
Sent from my A500 using xda premium
Thanks Intratech. Are you planning a XEU frankenstein version?
Anyone flashed yet? Results?
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Cheers for the heads up! Im on KI4 With KI4 modem, Think ill switch back to KI3 Modem
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Thanks a lot, as always.
PS: I'm happy about the KI3 modem choise, KI4 performs worse than KI3 on my h3g network
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Intra how long till upload?
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Thanks again Intratech.
I agree on KI3 modem, it was better for me too and Im on Orange.
Google Voice
Before some asks video in Google Voice is NOT working.
Charlie C
madpete said:
Thanks again Intratech.
I agree on KI3 modem, it was better for me too and Im on Orange.
Click to expand...
Click to collapse
hi mate quick question u on orange uk?? is ur push email working?? mines seems to have stopped i can set as non premium account and i can set frequency and do it but cannot set up a push one again... was working till my recent update to ki4 2.3.5
andresalonika said:
Intra how long till upload?
Click to expand...
Click to collapse
Also waiting on the KI3 modem version lol
ki3 modem would not work with 3g gsm here on att in the usa.. it work with hspda but would not slow down to the slower 3g.. ki4 works fine.
Sorry for the delay lads. Got side track with some system analysis work I need to finish asap.
Here is the Frankenstein XEUKH2 build: http://www.multiupload.com/QYQLC8KGJ8
PDA: XWKJ1| Phone: XXKI3| CSC: XEUKH2
Wicked, thanks intra. Downloading now
Sent from my GT-I9100 using xda premium
cc999 said:
Before some asks video in Google Voice is NOT working.
Charlie C
Click to expand...
Click to collapse
I don't get the big deal with this everytime a firmware is released. It's so easy to just delete the talk.apk and talk.odex and just add the libtalk_jni.so to the lib directory and copy the talk2.apk to the app directory and you'll have google talk with video..... or if you have CWM then it's as simple as flashing a zip.
JPKJ2 Is very Good
Thanks IntraTech...I am useing JPKJ2 with XEUKH2... I flashed XEUKH2 CSC
I feel KJ2 is good compare to KI3/4...Its more snapper & fast.
IntraTech One Question regarding I9100ZCKJ1
http://forum.xda-developers.com/showthread.php?t=1317372
Some one have posted it saying its 2.3.6
I see this ROM is avilab in TEST Mode
Product Code: GT-I9100LKACHN
Latest firmware: I9100ZCKJ1/I9100OZHKJ1/I9100ZCKJ1/I9100ZCKJ1
Modified: 19-10-2011 PM 02:57:46
Filename: GT-I9100_CHN_1_20111019144923.zip.enc2
Can we have Frankenstein version Normal I9100..
It that ROM 2.3.6 ....?
Getting constant f.c, com.android.phone. first time I've ever had this after a flash.
Sent from my GT-I9100 using xda premium
Was about to flash this but I certainly don't want any com.android.phone fc's. Anyone else having this problem and if so, is it easy to fix?
TheSopranos16 said:
Was about to flash this but I certainly don't want any com.android.phone fc's. Anyone else having this problem and if so, is it easy to fix?
Click to expand...
Click to collapse
last time i had it it was fixed by a factory reset
factory reset fixed it when i got FCs
Try this patch it works really well i tried it and im gettin gon doomkernel 6 percent for 5 hours dats excellent im really happy the link is http://forum.xda-developers.com/showthread.php?t=1382657
I've got baseband -58 on Hong Kong ROM, will this patch change anything, cause I can't find any annotation about HK's -58 baseband.
romcio47 said:
I've got baseband -58 on Hong Kong ROM, will this patch change anything, cause I can't find any annotation about HK's -58 baseband.
Click to expand...
Click to collapse
Ye the thing is get the latest flashtool and select the .368 firmware only flash the baseband so leave out the system and the kernel, then when you done that. Then get the libs flash it through recovery of doom, then youll have much better battery I done it myself works really well. Ive got the .58 firmware with the 36 baseband and the libs flashed for that.
romcio47 said:
I've got baseband -58 on Hong Kong ROM, will this patch change anything, cause I can't find any annotation about HK's -58 baseband.
Click to expand...
Click to collapse
Also the baseband you got maybe a little difference but you should get the 36 baseband much better battery and signal
I've noticed some signal loss when phone is idle and being waken up. Signal rises from total ZERO to max in 2 secs.
I'll try to flash new baseband and this fix and tell you what happened.
edit:
Curiosity killed the cat... umm, the phone I did something wrong and I had to reflash the whole ROM. I won't try to apply this fix again until official release.
Anyone got the Play specific libs for this?
Yes I posted them in another thread about this exact same thing
here: http://forum.xda-developers.com/showthread.php?t=1383069
Libs for the -36 baseband and -58 baseband attached here
Sent from my R800a using XDA App
thatsupnow said:
Yes I posted them in another thread about this exact same thing
here: http://forum.xda-developers.com/showthread.php?t=1383069
Libs for the -36 baseband and -58 baseband attached here
Sent from my R800a using XDA App
Click to expand...
Click to collapse
Ah thanks for that! I knew I had seen it somewhere, but couldn't find it again! Time to install the -36 libs.
Out of curiosity, are you running either or these?
Atarii said:
Ah thanks for that! I knew I had seen it somewhere, but couldn't find it again! Time to install the -36 libs.
Out of curiosity, are you running either or these?
Click to expand...
Click to collapse
Yea I was running the -36 baseband for a week to see what the signal and drain was like now I'm running the -58 baseband and I can say that the -36 is better than the -58 especially on the battery
Sent from my R800a using XDA App
i agree 100 percent mate i noticed a big difference in battery i can say
help
i was wondering if anyone could help me
I flashed baseband .36 to my phone and the applied iridaki baseband libs patch for arc
i lost all network
tried putting play libs from this thread into his cwn flashable patch and still no joy
now i'm stuck on baseband .36 with the wrong libs
tried full nandroid restore but to no effect
Use flashtool to flash just the baseband for whichever firmware
Like this: http://forum.xda-developers.com/showpost.php?p=20152843&postcount=20
Hi guys , i have applied this patch and i am happy , the only problem im getting here is the wifi connection... now i take ages to download the games via market... its fast until i get 60m then its a pain :S
Sounds like a probmatic patch.
Hello. Bought a Used Samsung Galaxy S I9000 2 days ago just for having some fun. Im facing a problem. I dont know whether this is a problem or just a bug as im on Android Ver 2.3.4.
When phone uses network to make call or message or use data connection over network screen start to flicker as some magnetic thing is placed near screen. Is this a bug or a Hardware fault ?
Thanks and im new to this forum if this is posted in wrong section please feel free to move it. Thanks.
any one ? any reply ? so many views but no reply.
Update your phone's software via Kies or flash a custom rom
jstgabytz said:
Update your phone's software via Kies or flash a custom rom
Click to expand...
Click to collapse
manually updated it to ver 2.3.6 but still the same problem. i think its hardware fault.
panjgoori said:
manually updated it to ver 2.3.6 but still the same problem. i think its hardware fault.
Click to expand...
Click to collapse
Well you said it's used so the chances that it will be hardware fault are high, but you always can go to a fixing lab just to check if there's an hardware problem
This could be the proximity sensor. Had this on an old device. Only a few pounds on ebay to buy a new one.
Sent from Paul. If I helped please click the 'Thanks' button.
panjgoori said:
When phone uses network to make call or message or use data connection over network screen start to flicker as some magnetic thing is placed near screen. Is this a bug or a Hardware fault ?
Click to expand...
Click to collapse
check hardware with this https://play.google.com/store/apps/details?id=com.fivasim.androsensor&feature=search_result
certain hardwares problems can be fixed by using this codes http://forum.xda-developers.com/showpost.php?p=26542865&postcount=4452
technician manual http://forum.xda-developers.com/showthread.php?t=1709378
xsenman said:
check hardware with this https://play.google.com/store/apps/details?id=com.fivasim.androsensor&feature=search_result
certain hardwares problems can be fixed by using this codes http://forum.xda-developers.com/showpost.php?p=26542865&postcount=4452
technician manual http://forum.xda-developers.com/showthread.php?t=1709378
Click to expand...
Click to collapse
checked that app. hardware seems to be working fine. whenever i dial a number from other phone and put it at the back side of galaxy s screen starts to flicker as some lines comes on screen as you see a lcd on a camera. this happen only till the phone dials the number and then gone.
panjgoori said:
checked that app. hardware seems to be working fine. whenever i dial a number from other phone and put it at the back side of galaxy s screen starts to flicker as some lines comes on screen as you see a lcd on a camera. this happen only till the phone dials the number and then gone.
Click to expand...
Click to collapse
why don't you update your firmware to latest
xsenman said:
why don't you update your firmware to latest
Click to expand...
Click to collapse
last time a checked three days ago there were no update for my device so i updated it manually to version 2.3.6 XWJW1 firmware. its not the value pack version.
panjgoori said:
last time a checked three days ago there were no update for my device so i updated it manually to version 2.3.6 XWJW1 firmware. its not the value pack version.
Click to expand...
Click to collapse
you are picking up interference from somewhere , so best to check if you are on the correct radio firmware or your unit may have been repaired before and they have not housed back properly , since it is only picking up interference at close range with other radio frequencies
check http://forum.xda-developers.com/showthread.php?t=1102881 for the correct firmware package based on your location
anyone else having this kind of problem with their galaxy s ?
panjgoori said:
anyone else having this kind of problem with their galaxy s ?
Click to expand...
Click to collapse
My friend's unit and mine does, this only happens on 2G
xsenman said:
you are picking up interference from somewhere , so best to check if you are on the correct radio firmware or your unit may have been repaired before and they have not housed back properly , since it is only picking up interference at close range with other radio frequencies
check http://forum.xda-developers.com/showthread.php?t=1102881 for the correct firmware package based on your location
Click to expand...
Click to collapse
as my country comes in Middle East/Africa im downloading these three files: for phone/baseband i downloaded this file: Gingerbeard 2.3.3 Middle-East and Africa JXJV6, for firmware Gingerbeard 2.3.4 JPJVC/JXJV6/OJPJV7/Sbl (MultiCSC), and stock kernel for middle east and africa.
is im choosing correct files ? Currently my phones baseband version is XXJVP.
panjgoori said:
as my country comes in Middle East/Africa im downloading these three files: for phone/baseband i downloaded this file: Gingerbeard 2.3.3 Middle-East and Africa JXJV6, for firmware Gingerbeard 2.3.4 JPJVC/JXJV6/OJPJV7/Sbl (MultiCSC), and stock kernel for middle east and africa.
is im choosing correct files ? Currently my phones baseband version is XXJVP.
Click to expand...
Click to collapse
any combination of PDA, Modem and CSC is possible, as such you even use the JW6 being 2.3.6, with your country CSC and Modem
xsenman said:
any combination of PDA, Modem and CSC is possible, as such you even use the JW6 being 2.3.6, with your country CSC and Modem
Click to expand...
Click to collapse
thanks. im downloading it now.
MrAndroid12 said:
My friend's unit and mine does, this only happens on 2G
Click to expand...
Click to collapse
is there any chance of screen failing completely because of this ?
panjgoori said:
thanks. im downloading it now.
is there any chance of screen failing completely because of this ?
Click to expand...
Click to collapse
It's just radio interference, i don't see how that has anything to do with failing screen
flashed phone. but still the same thing. will use the phone as long as it will work fine.
panjgoori said:
flashed phone. but still the same thing. will use the phone as long as it will work fine.
Click to expand...
Click to collapse
Switch modem. I had this too, it happens when you have modem which is using too much power to make calls.... Which means you have rock solid and stable signal, but it interferes with the rest of the phone...Try JVQ or JVT modems.
Virnik0 said:
Switch modem. I had this too, it happens when you have modem which is using too much power to make calls.... Which means you have rock solid and stable signal, but it interferes with the rest of the phone...Try JVQ or JVT modems.
Click to expand...
Click to collapse
tried both. but still no luck. btw i tried JVQ Australia/New Zealand one.
edit: now tried both but still no luck. and one thing does it requires to flash full firmware including PDA,CSC or just replace the modem with these two which you named ?
Does anyone have a matching modem for CM11? It seems not matter which modem I switch to, I can't hang-up any calls. This was the problems I was having with CM10 until I upgraded to I9300XXDLIB.
So which one do I need to upgrade to now?
I can't seem to locate a modem for the i9300XXDLI2 or i9300XXDLI3 RIL that my phone has after I upgraded to CM11. And GETRIL does not have a RIL for I9300XXDLIB. It's a catch22. WTF?
Could someone point me in the right direction?
fbarcenas said:
Does anyone have a matching modem for CM11? It seems not matter which modem I switch to, I can't hang-up any calls. This was the problems I was having with CM10 until I upgraded to I9300XXDLIB.
So which one do I need to upgrade to now?
I can't seem to locate a modem for the i9300XXDLI2 or i9300XXDLI3 RIL that my phone has after I upgraded to CM11. And GETRIL does not have a RIL for I9300XXDLIB. It's a catch22. WTF?
Could someone point me in the right direction?
Click to expand...
Click to collapse
have you tried the MG4 modem?
Where do I find it? Most all of them say 4.1.2 . will it still work with Android 4.4?
Sent from my GT-I9300 using Tapatalk 4
fbarcenas said:
Where do I find it? Most all of them say 4.1.2 . will it still work with Android 4.4?
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
read this
http://forum.xda-developers.com/showpost.php?p=43946365&postcount=15
owh and do a efc and nandroid backup just in case
there is a zip file in that link called my emergency zip it has mg4 modem
Blackwolf10 said:
read this
http://forum.xda-developers.com/showpost.php?p=43946365&postcount=15
owh and do a efc and nandroid backup just in case
there is a zip file in that link called my emergency zip it has mg4 modem
Click to expand...
Click to collapse
OK, from what I understand the MG4 modem is for people that have issues with their modem registering. That is not my issue, I can make calls, I just can't hangup.
I'm looking for a way to fix my hangup issue. Other than that, my phone works fine. I have internet, I can receive calls. Everything works. I just can't hangup.
Does that help you better understand my issue?
fbarcenas said:
OK, from what I understand the MG4 modem is for people that have issues with their modem registering. That is not my issue, I can make calls, I just can't hangup.
I'm looking for a way to fix my hangup issue. Other than that, my phone works fine. I have internet, I can receive calls. Everything works. I just can't hangup.
Does that help you better understand my issue?
Click to expand...
Click to collapse
well I was on Cm11 too and mine was all fine
ok u can try getting the latest build with full wipe maybe that will help
Blackwolf10 said:
well I was on Cm11 too and mine was all fine
Click to expand...
Click to collapse
Your sig shows S4 Revolution v10 which is a 4.2.2 based rom. Not a 4.4.2 based rom like CM11.
Blackwolf10 said:
ok u can try getting the latest build with full wipe maybe that will help
Click to expand...
Click to collapse
I had already tried a full wipe. It still would not hang up. Maybe a wipe script might be better.
http://forum.xda-developers.com/showthread.php?t=2076857
u can try them any 412 modems. i have ma5 modem works fine on omni.
I got feed up and switched to OMEGA v51 I comes with modem/ril and it all works together right out of the box(so to speak). Why can CM get their act together and deliver a modem that works with their updates. If they can´t included because it´s not open source, they should at least put a link or something in the WIKI or in the installer or something like that.
If u r having problems, u have 2 reach a solution. 4 example install it any 412 modems not roms cuz long way anyway ur choice ur problem.
fbarcenas said:
Your sig shows S4 Revolution v10 which is a 4.2.2 based rom. Not a 4.4.2 based rom like CM11.
Click to expand...
Click to collapse
actually my signature is outdated and S10 revolution is a 4.3 based rom
I was on 4.2.2 then I went on s4 revolution 10 which is based on 4.3 so there was no signal so I flashed MG4 modem and everything was working good until I found some bugs in the rom so I switched to Cm11 which and I had no hanging issues
It turned out to be just a bad nightly. The next one fixed it. I restored to the Cm11 backup and ran an update to 12-16 and *poof* I could hangup all of a sudden.
I have had this experience with cm roms both on my motorola xt912 and galaxy s3
eventually i just changed to slimbean rom to rectify
Digicel & LIme network gsm St.Lucia
Zizza said:
I have had this experience with cm roms both on my motorola xt912 and galaxy s3
eventually i just changed to slimbean rom to rectify
Digicel & LIme network gsm St.Lucia
Click to expand...
Click to collapse
I have digicel too I'm from Barbados
Sent from my GT-I9300 using Tapatalk
livystewy said:
I have digicel too I'm from Barbados
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Bigup!! Caribbean Neighbor
Have u been having similar issues?
Zizza said:
Bigup!! Caribbean Neighbor
Have u been having similar issues?
Click to expand...
Click to collapse
Yes but I got fed up and went straight to 4.3
Sent from my GT-I9300 using Tapatalk