Database Users

8525 cingular freezes in att logo

I unlocked the phone using the v3 pof method and it worked and the phone calls were working.. glad i spent the time to do so and went to bed.. this morning i turn it on and it freezes in the att logo and doesn't go anywhere else.. despite soft reset hard reset and doing the two button stylus method...
so is my phone bricked or fried? it sucks cause it was working and not it won't pass the att logo... i can go to the tricolor by pressing ok and power button... any suggestions/

Try flashing rom, SPL?

ok, so do you mean go somewhere like here
http://www.htcamerica.net/support/8525/software-downloads.html
to update the rom spl? i think my rom spl is 1.40 im thinking this is the latest or not? anyway i think latest might be 1.40.3 or something while mine is 1.40.01
is this what you mean by upgrading my spl rom?
since i'm able to only go to my boot screen with att logo only i can't go to the device section in win6 and see my rom version ... so i did the ok button and on button to get to the tricolor area.... and spl showed 1.40.. so is this the rom spl that i have?
im hoping this will help clear the att logo screen freeze... if not i have no other options..

i can't even upgrade the rom since it'sat that screen always... does this mean i'm stuck for good?

Try flashing HardSPL

monkeyisland90 said:
i can't even upgrade the rom since it'sat that screen always... does this mean i'm stuck for good?
Click to expand...
Click to collapse
you can still flash from that bootloader screen. see if the following link helps
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick

I forgot to mention i do have hard spl 1.40 ollipro
do i need to upgrade to the 2.10xx ollipro?
also looking at the unbrick from the wiki i need to
"flash only nbh containing os"
now i'm not sure where i can get this "nbh" file containing os and how i can flash it without being able to sync via usb cable since it doesn't get passed att logo splash screen...
BUT
I can go to the tricolor bootloader...
so if anyone can direct me on how i can get the "nbh" file containing os only
(not the nbh file containging radio only)
and how i can do so via the tricolor bootloader, i will give you a pat on the back! i have warm hands so you'll get healing from it also..

monkeyisland90 said:
so if anyone can direct me on how i can get the "nbh" file containing os only (not the nbh file containging radio only)
Click to expand...
Click to collapse
Pick a ROM (make sure it's OS only, most are), uncompress it, look for a file (usually. I've never seen a cooked ROM that didn't have this filename as the OS image, but one never knows) named "RUU_signed.nbh".
That that file and read the wiki on flashing the phone using an SD card.

HTC P3300 stuck in boot screen

hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!

?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...

T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz

Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.

Here the same...any one help?

kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM

Need help with flashing XDA ORBIT 1

I've tried to flash many roms, but gotten error at 3-5%.
Screen on my pda goes black and pda resstarting...
Please someone can explain, how to flash step by step, and what is reason for error?
When i switch it on I see:
ipl 3.04.0001
spl 3.04.0000
gsm 03.06.90
os 3.4.0.0
win: 6.0 by ferfecir

Now i done I don't know what!
When i go into hardreset, after, i see only IPL and SPL versions without GSM and OS. I do hardreset, cos I can't switch on by POWER button!
Please can someone help me to unlock SPL and reflash normally ROM?
All image files which i've tried to flash trough BOOTLOADER USB mode getting error on 3 - 79%...

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi

You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.

i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help

You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.

i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now

You must to download a rom from the Same Operator and same location.

how back to wm

hy people i have problem with my htc blackstone. Now he is on nand android and how i back to windows mobile
please help or links thnx in advice
mladjo

mladjo976 said:
hy people i have problem with my htc blackstone. Now he is on nand android and how i back to windows mobile
please help or links thnx in advice
mladjo
Click to expand...
Click to collapse
Read more about Flashing and the WM ROM files in the ROM development threads to be comfortable before trying.
1. Flash HSPL 1.56 Olinex. Instructions here:
http://forum.xda-developers.com/showthread.php?t=505377
2. Download WM6x ROM. One of the better examples in this thread:
http://forum.xda-developers.com/showthread.php?t=1719627
3. Copy ROM file (RUU_Signed.NBH) to the root of your microSD.
Rename the file to BLACIMG.NBH.
4. Switch off Blackstone and insert microSD with BLACIMG.NBH file.
5. Hold VolumeDown + Power keys until Blackstone shows 3-color screen.
6. 3-color screen will go to white screen to ask you whether or not to go ahead with ROM update.
Press Power key to proceed with update. It will take 4-5 mins.
7. When Blackstone screen show "Update Successful", it means flashing is completed.
a. Remove and re-insert battery
b. Power On.
Blackstone will proceed with the installation of the operating system files. It will take about 4-5 minutes.
When the progress bar is completed, Blackstone will restart itself WM6x the first time. Just customise and use.

HSPLWrapper sits at 0% and gets error 262
chan.sk said:
1. Flash HSPL 1.56 Olinex.
Click to expand...
Click to collapse
i have:
SPL-1.54.0000
running: FagyiDROID-V1
all the other stuff from this thread: http://forum.xda-developers.com/showthread.php?t=1914723
i have the problem that the HSPLWrapper_Blackstone_156OliNex.exe sits at 0%. The status bar is also displayed on he phone but sits at 0% also. after a minute or so i get an ERROR 262, the recovery doesn't work, phone still boots into android afterwards. when i manually boot into bootloader while recovering the HSPLWrapper continues updating but stays at 0% and i get the same error again. the bootloader still displays SPL_1.54.0000
what can i do?

You can still flash back to WM while on SPL 1.54.
Just bypass the HSPL process and carry on with Step 2 onwards.
After installing WM6.5, you can still do a separate upgrade to SPL 1.56 Olinex at a later time. The upgrade of SPL is a separate process, and does not affect the WM 6.5 on the phone. I had done this before - install WM 6.5 with SPL 1.54, then flashed HSPL 1.56 Olinex - no problems, no need to re-install WM.
For upgrade SPL to HSPL 1.56 Olinex, if you still encounter error with SPLWrapper_Blackstone_156OliNex.exe, go to the Tutorial for flashing
http://forum.xda-developers.com/showthread.php?t=505377
Post #2
Carry out the instructions according to the Troubleshooting - manual SSPL section. I had guided some other folks who got Error 262, and it worked.