HTC P3300 stuck in boot screen - P3300, MDA Compact III upgrading etc.

hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!

?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...

T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz

Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.

Here the same...any one help?

kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM

Related

My Prophet don't start

Hello, I am looking for the solution to the problem of my HTC PROPHET (SPV M600 model) that does not start. In detail what I have already done:
1) I made the procedure HARD RESET following the guides published on the forum.
2) I made the procedra of BOOTLOADER and loaded Rom (I tried with several Roma) following the guides published on the forum.
3) ActiveSync 4.5 installed.
The result is that the device will not start: the screen appears with the logo of the rom (Orange or HTC) and IPL data, SPL data, etc etc, but sometimes or remains firm on this screen, or other times the screen fades plan floor.
What can I do?
Best regards
Marco
Did u already tried another rom? Which rom did u use?
Is activesync still connecting with your device?
i tried with rom of:
1) Orange
2) Qtek
3) I-Mate
the first two i can install correctly, but device don't work... when i try to install rom I-Mate, it give error message about nk.nbf file isn't compatible with prophet. i know about a program NOID COUNTRY that install every rom on prophet... do you know this program?
pincho76 said:
i tried with rom of:
1) Orange
2) Qtek
3) I-Mate
the first two i can install correctly, but device don't work... when i try to install rom I-Mate, it give error message about nk.nbf file isn't compatible with prophet. i know about a program NOID COUNTRY that install every rom on prophet... do you know this program?
Click to expand...
Click to collapse
Check on boot loader that ur device did HardSPL properly, it should look like my sig.
Also why are you trying to put OEM ROM on, why not use one of the prophet wm6/wm6.1?
Hello,
after reading your post, I rebuilt the hardreset and then starts in bootloader, but does no more. I tried with any Rom, but always starts in bootloader (IPL 2.10.0001 - SPL 2.20.0001 indicates that is a G4 right?)
is dead? because I really tried with all Rom at my disposal, but the result is this hour.
pincho76 said:
Hello,
after reading your post, I rebuilt the hardreset and then starts in bootloader, but does no more. I tried with any Rom, but always starts in bootloader (IPL 2.10.0001 - SPL 2.20.0001 indicates that is a G4 right?)
is dead? because I really tried with all Rom at my disposal, but the result is this hour.
Click to expand...
Click to collapse
It would appear that your hard SPL was not sucessfull, it should say something like SPL : 2.G4.4PDA (or something similar)
Yes you have a G4 model. what were the steps you took to do SPL? did you follow the guide? Did you unplug all ur usb connections and try other usb ports?
If you start bootloader and connect your usb to device does it say USB on the screen? Also are you using windows XP on computer?
timmymarsh said:
what were the steps you took to do SPL? did you follow the guide? Did you unplug all ur usb connections and try other usb ports?
Click to expand...
Click to collapse
I followed the guide on PROPHET_HARDRESET_BOOTLOADER on WIKI: the operation seems to succeed because I see the message on the display of operating system restored. Tested with all the usb ports, and disabling the connection usb dall'activesync.
timmymarsh said:
If you start bootloader and connect your usb to device does it say USB on the screen? Also are you using windows XP on computer?
Click to expand...
Click to collapse
USB appears on the display and use xp.
I noticed that when upgrade Rom program start, I see on the display a green bar progress, but turns red when it arrives 99%-100%. It may mean that something is not successful, despite the process ends without mistakes?
What is the devices IPL/SPL, and what brand is the device?
l3v5y said:
What is the devices IPL/SPL, and what brand is the device?
Click to expand...
Click to collapse
Hi!!!!
sorry for late answer....
IPL:2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.10.1.22
Brand: Orange
after installing the latest rom Orange, these are the data that appear on the monitor. But still not start. It remains firm on this screen, or this screen fades slowly as reported in a previous post.
From tomorrow I will be on vacation, return to this issue by September 1 ....
a greeting and goodbye to September 1 !!!!!
pincho76 said:
Hi!!!!
sorry for late answer....
IPL:2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.10.1.22
Brand: Orange
after installing the latest rom Orange, these are the data that appear on the monitor. But still not start. It remains firm on this screen, or this screen fades slowly as reported in a previous post.
From tomorrow I will be on vacation, return to this issue by September 1 ....
a greeting and goodbye to September 1 !!!!!
Click to expand...
Click to collapse
If you have the time, download and flash an NVID Prophet ROM from the wiki. Make sure it's NVID though!
l3v5y said:
If you have the time, download and flash an NVID Prophet ROM from the wiki. Make sure it's NVID though!
Click to expand...
Click to collapse
Hello!!!!
i'm coming back from Paxi (Greece)... very nice island... good sea... good food... very nice gals.... i liked it!!!!!!
Downloaded from Wiki "RUU_Prophet_220734_2207114_024721_NVID" and installed without problem but nothing to do: the same problem!!!
Now when it start i can see first HTC Innovation Logo, after QTECK logo with:
ipl: 2.10.001
spl: 2.20.0001
gsm: 02.47.21
os: 2.20.7.34
but after some minutes the screen fade....
i would give you some information:
- into the device ther's not memory card and sim card.
- when i charge it, led is always red, also if leave in charge for 10 hours!!! It's normal???
Ciao
Marco
If the LED is red, I'd try and find a replacement battery.
read from here http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
and here http://forum.xda-developers.com/showthread.php?t=353547
read carefully ok...

bricked...

Hello
Got here friends htc wizard (MDA VARIO). After dunno what only boot screen appears and thats all. Bootmanager is accessable.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
I am able to put there button rom, but thats all. I tried many roms, but noone can be instaled. Also tried love wizard rom. I dont have the original rom.
Batery is loaded up to max.
Any suggestions?
Ok solved, it was problem with flash tool.
EDIT: still i dont have any functional ROM. The love wizard rom doesnt boot up. I dont have access to original rom. I am nearlly at end of ideas.
I was able to load there this ROM:
RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.exe
But still it freezes on boot screen.
Please, anybody got a rom, that works in a Mda Vario from slovakia? Its for sure cid blocked and i dont have a functional rom.
Hard reset is not possible. He says, that failure at format. Any body got some idea????
maybe you can try to update your IPL to 3.08 and GSM to 2.x
sailor_sky said:
maybe you can try to update your IPL to 3.08 and GSM to 2.x
Click to expand...
Click to collapse
Tryed and still not working. But thanks for your post

Need help with flashing XDA ORBIT 1

I've tried to flash many roms, but gotten error at 3-5%.
Screen on my pda goes black and pda resstarting...
Please someone can explain, how to flash step by step, and what is reason for error?
When i switch it on I see:
ipl 3.04.0001
spl 3.04.0000
gsm 03.06.90
os 3.4.0.0
win: 6.0 by ferfecir
Now i done I don't know what!
When i go into hardreset, after, i see only IPL and SPL versions without GSM and OS. I do hardreset, cos I can't switch on by POWER button!
Please can someone help me to unlock SPL and reflash normally ROM?
All image files which i've tried to flash trough BOOTLOADER USB mode getting error on 3 - 79%...

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.

stuck on bootloader screen

Hi,
I have tried to flash a wiza200 that was already flashed with a manila rom, I checked that it is a G4. I used TNT.20273 Professional Wizard HTC Home FREE ROM, it seems to work , romupdate utility indicated that the device was flashed successfully but it reboots on bootloader screen. I tried to reflash it it gave the same result, I tried another rom but impossible to flash it with other roms. So I downloaded the official one from the operator O2 but I got "invalid vendor" message. I searched all the possible solutions but none of them worked( wizard love also). Is there a savior here ? someone who can give me the right procedure to follow.
initially the IPL was 2.21.0001 and spl 2.21 Olipr
now the IPL is 2.21.0001 and spl 2.21
Thanks
Best regards.
You must replace the Update.exe with a MaUpgradeUT_NoID.exe . Found here in Forum . Look in "Blue Angel" for it. Be sure that you flash the right ROM with it . It will no ask...

Categories

Resources