hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.
My Gene (older Gene) had this configuration:
ONBL 1.11.0000
SPL 1.10.Olip
It worked very well with WM6.5
But when I downloaded the orefkov spl to unlock it will not turn over and just enter bootloader mode
Now this:
ONBL: 1.11.0000
SPL: 1.07.Oref
Please help me, I do not know what to do
Everytime I try to install the new rom, even as a unique, does not work and displays the error 300 in ROM Update Utility
Help me
please!!
I redid all the method described by Orefkov
I tried several roms, but when it comes time to write the rom on the device, is at 0% and the RUU gives error 300
I do not know what else to do.
This happened after I try to unlock CID.
Somebody help me, please, this phone is not mine.
Show me some topic, whatever.
I also tried the method to make it boot from the SD CARD, but I could not make it work, maybe cuz this is the old gene.
Help me ..... please!
Hi
Big problem.
1. CID Unlock - has worked
2. Flashed new ROM - has worked
After 100% the RUU says, Congrats... But too late i saw it was an ELFI ROM with 74MB but my Touch is an ELF 64/128.
But it booted! Once...
After the device has rebooted i made the screen settings and after windows has configured the device rebooted again.
After reboot the device doesnt come back.
I got the boot logo and then the screen will be black.
Hardreset doesnt work.
After FORMAT FAT & FORMAT IS COMPLETED the screen is always black.
Holding CAM Button and Softreset brings the Colored-Display.
IPL 2.24.0002
SPL 1.11.0000
A new CID unlock doesnt work because there is no active sync connection.
Flashing any other ROM works but it seems to have no effect.
RUU can connect but dont shows any installed image version.
If i click update the progressbar in the HTC display appears and goes to 100%.
After finished the update the device reboots and the screen is black.
Did i have erased my htc? Is there any solution for this problem?
*** EDIT ***
I tried this ht*p://forum.xda-developers.com/archive/index.php/t-359413.html
Now i have IPL 1.11.0002 an SPL 1.11.0000
Step G3/7 says:
Download T-Mobile 2.26 rom (ht*p://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship. exe.html)and flash it to your device! Done? Go to step G3 / 8
But the link is invalid. (yes ive seen the space at the . exe)
Does anyone have this file so i can try this step.
Ecosys
try upgrading the IPL/SPL to some 2.2X version. and next time post in an appropriate thread related to unbricking, u dont have to start a new thread.
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.