I'm trying to run s2u2 2.0 on my treo pro but the resolution is to large for the screen to run properly, is their any way to adjust the screen size to use this great program?
did u dl the qvga version? im running s2u2 2.02 qvga with no problem.
I dl'd the vga version but on the qvga version, the program freezes up! is there anyway to fix this?
not sure what to tell you, qvga works perfect for me. i have disable kguserv so the lock button wont pop up when pressing the red button.
Thanks for the help
did it work for you?
polobreaka said:
not sure what to tell you, qvga works perfect for me. i have disable kguserv so the lock button wont pop up when pressing the red button.
Click to expand...
Click to collapse
can you please tell me how did you disable the lock button? kguserv?
mrdk910 said:
I dl'd the vga version but on the qvga version, the program freezes up! is there anyway to fix this?
Click to expand...
Click to collapse
I had the Same problem you have to Chnage Display Mode to "RawBuffer" and it wont freeze anymore.
you have to do this thru the registry editor. \HKEY_CURRENT_USER\Software\A_C\S2U2 scroll down to "Display Mode" and change the value to "00".
that should fix the freezing problem. Hope This helps
lalord69 said:
can you please tell me how did you disable the lock button? kguserv?
Click to expand...
Click to collapse
Hi,
seems to me that the KGUSERV runs at startup, if you google you will find instructions on how to disable it.
I disabled Palm Treo Pro keyguard this way:
HKLM\System\KeyTouch, change value of "IsAlignScreen" from 0 to 1
Wait app. 30 seconds after changing then softreset the Treo Pro. Now keyguard is disabled.
Regards,
wewefant
Related
It's found there are several issues when running S2U2 on Diamond. An intermidiate fix is that:
1. Disable DirectDraw will prevent the occasional blank screen;
2. Enable NoBackLightCheck (it's only valid in v1.05 or later; create a DWORD value with name NoBackLightCheck and value 1 under \HKEY_CURRENT_USER\Software\A_C\S2U2; restart iLock2) will make IdleStart works again.
Known issues:
1. CallerID does not work.
2. Home key cannot be locked.
3. "S2U2 Settings" has error when it's scrolling about half the way.
UPDATE on 29 July:
A new version of S2U2 v1.10 is released at http://forum.xda-developers.com/showthread.php?t=412418.
For optimal usage with Diamond, make sure you grab the VGA version & turn on "Don't double check Backlight" at the S2U2 Settings.
thnx A_C for the info, already try to solve it but hope you can come out a diamond version soon....by the way s2v zoom function also not able to use on diamond any solution??
Had the same problem with zooming, did not found the bugs with s2u2 yet but if you say soo... Is there a version for Daimond of s2u2 en s2v coming??
Greetz and thanx for your wonderfull applications!
thank you for yr concern. the only thing that real bother me is my diamond always answering my calls due to the pressure from the belt case. i realy hate that. i miss s2u2 soooooo much. please do something. no need of gifs or fancy clocks. only a slide to unlock and caller id that works with the diamond. please!...
"ExceptionEXE4"="cprog.exe"
"SafeMode"=dword:00700000
for callerID, if you use advanceconfig to disable the phone skin, then it works! But your diamond-style dialpad will disappear.
I just installed S2U2 on my diamond.
When my device is locked, i can access my device when i press the home key. so basically, it is not ''locked''.
any idea how to disable all hardware buttons during locked up?
ranchu said:
I just installed S2U2 on my diamond.
When my device is locked, i can access my device when i press the home key. so basically, it is not ''locked''.
any idea how to disable all hardware buttons during locked up?
Click to expand...
Click to collapse
Did you read the first post?!
I guess A_C is working on the problem (hope so )
thx for A_C again
And for the weather?
A_C are you planing on releasing a version which fixes the issue ?
Da9L said:
A_C are you planing on releasing a version which fixes the issue ?
Click to expand...
Click to collapse
Sure, but as said in the first post, it takes times...
S2U2 v1.10 released
@ALL
A new version of S2U2 is released at http://forum.xda-developers.com/showthread.php?t=412418.
For optimal usage with Diamond, make sure you grab the VGA version & turn on "Don't double check Backlight" at the S2U2 Settings.
could i have the battery in blue color? or a method to create myself if is it possible
i've put the vga battery bigger than normal
very compliments A_C for the program,it is very usefull
tnx
A_C said:
@ALL
A new version of S2U2 is released at http://forum.xda-developers.com/showthread.php?t=412418.
For optimal usage with Diamond, make sure you grab the VGA version & turn on "Don't double check Backlight" at the S2U2 Settings.
Click to expand...
Click to collapse
totally sweet
Thanks A_C - looks like this works nicely with having a password lock, etc
i been playing around with it for the last hour, had 3 calls and a few sms, all working perfectly, now whos for coffee
Only HTC Weather isnt working
Imaginati0n said:
Only HTC Weather isnt working
Click to expand...
Click to collapse
Same issue for me... I use the TF3D weather...
I don't know why my Diamond touch screen was disable when I lock it with the new version 1.10b? Cannot slide to unlock? I've uninstall my older version, delete all the file/ reg. and install the new version. Can anyone told me what to do? Thank you so much and I love this software very much!!!
Not sure where to post this so I created a thread.
Forgive me if this is not correct.
Playing wiht the registry I found the key HLM->System->GDI->Rotation which has a HideOrientationUI attribute. Set it to 0 and the standard screen rotation option will appear in the control panel
great find !!!
thats great news findinf that..is it possible to set soft key to rotate when required ?
thanks again for that !!
chiccusmaximus said:
Not sure where to post this so I created a thread.
Forgive me if this is not correct.
Playing wiht the registry I found the key HLM->System->GDI->Rotation which has a HideOrientationUI attribute. Set it to 0 and the standard screen rotation option will appear in the control panel
Click to expand...
Click to collapse
So now hd can autamaticly rotate screen in windows view ? (like omnia ?)
Nice find! Thanks.
maziboss said:
So now hd can autamaticly rotate screen in windows view ? (like omnia ?)
Click to expand...
Click to collapse
It gives you an extra option in Control Panel that lets you select if the display is Landscape or Portrait.
maziboss said:
So now hd can autamaticly rotate screen in windows view ? (like omnia ?)
Click to expand...
Click to collapse
You can use Gyrator or GSen to do that
Yes, this is not automatic it just re-enable the standard screen panel to manually select orientation.
apd said:
You can use Gyrator or GSen to do that
Click to expand...
Click to collapse
please advise, how, would love to be able to work on documents etc in landscape (auto switch) mode if possible.
Peter.
As apd said for the automatic rotation you can use Gyrator or GSen. Otherwise with this you can start your app and then manually rotate the screen from the control panel.
just tried this and it says "access denied" when i edit the value data and change the 1 to 0
am i missing something?
Steve
used resco regedit ... works!
wow. This is really nice. Thanks! now I don't need the gyrator!
I can find nothing new after manipulating the registry.
Where can i exactly find the option in control panel?
In the Screen menu. If you still can't see the option, try a soft reset.
excellent find. thnx for sharing!
any program to change that or a cab file ??
thanks
Ill try this on the diamond to see if it works.
I wish I could try it with the demo phone @ the store (touch HD) before buying it.
I tried the registry edit on the demo Touch HD at the store.
The problem is that it keeps reverting back to portrait mode after accessing the phone menu.
So it will remain perfectly in landscape mode till I try to enter a phone number.
The phone menu is vertical, then it remains vertical.
Any info?
thanks.
Steve_HD said:
just tried this and it says "access denied" when i edit the value data and change the 1 to 0
am i missing something?
Steve
Click to expand...
Click to collapse
Try this http://www.all-at-hand.com/softwaresmspc.php?id=64
htc rotation screen
hi wher i can finde soft for rotation screen for htc hd like nokia n95 black edition hav ???
Windows STD
I read alot in the Blackstone section and I guess some Blackstone owners missed this little tool :
http://forum.xda-developers.com/showthread.php?t=442426
I posted it for the X1 but since the resolution of the X1 and the Blackstone is the same..
I hope it will work on the Blackstone too
It works nicely with emulators, SKYFIRE Beta 0.85 etc etc .
fotoingo said:
...
A week ago I received my X1 and tried WVGA Fix (Version 1) ! It didnt work...
After some searching i found a improved Version -WVGA FIX 2- now supporting all WM 5, 6, 6.1 and WVGA devices.
This little Program virtually "cuts" the pixels bigger than VGA from your device.
Dont get scared.. This only happens as long as you run the program.
Those pixels get black and the program emulates a VGA screen.
When you choose to get back to WVGA everything is fine again
So most programms (not only emulators) will work fine on our nice WVGA screen.
I thought some people here will love this tool too.
PS:Install the cert first, then WVGA FIX2 second.
Cheers !
All credits for this tool -> Cotulla
(Cant find the original downloadsource anymore)
Click to expand...
Click to collapse
Tried it already, Pocket UFO runs thanks to it.
Thanks! This has allowed me to try out SkyFire...
J
It doesn't work for me.
It change allways the display to landscape before freezing.
Hmm, SCUMMVM ???
yup I missed that... nice, definitely allows me to run some apps that otherwise screwed up... Especially skyfire
@vincent1: yes the rotation is annoying and not required, but it does Not freeze your phone. Your display mode changes and you still see the fix app running but it's just a frozen screen, press the today hard button and you will see manila, which instantly forces the screen to rotate back to portrait, after which you got normal VGA screen (except part of manila is missing). Now you can run any vga app you like. Just switch back to the fix program to undo the res change, press home again to fix the landscape mode, etc.
@nin2thevoid
thanks mate! Yep, pressing the today hard button is the secret
vincent1 said:
@nin2thevoid
thanks mate! Yep, pressing the today hard button is the secret
Click to expand...
Click to collapse
NP... I use AEButton by the way and have assigned long press of the volume up button to rotate the screen clockwise (I don't always like g sensors to do this for me). This gives an instant fix to this problem as well, and it un-freezes the program instantly.
vincent1 said:
It doesn't work for me.
It change allways the display to landscape before freezing.
Click to expand...
Click to collapse
I can confrim the above and the only way to solve it is to take the battery out as the screen does not react to tap.
hi
any news about this ?
Because I'm getting the same problem
I've tried this and it doesn't work on my HD. the phone becomes unusable.
Is there any other software to enable VGA programs? I'd like to run PocketUFO again.
any good for the hd2 ?.
there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)
Hi,
Wonder if someone can give me a quick answer to this problem...basically when I make a call the screen automaticaly turns off after a few seconds until a hardware button is pressed...is there anyway to turn off this feature? Just that I want pocketshield to completely control the way the screen turns on/off during calls? A registry edit perhaps?
Thanks
HD Tweak (http://montecristoff.webs.com/hdtweak.htm) will sort that out for you. It's one of the first options.
hi,
look to this prog,
http://forum.xda-developers.com/showthread.php?t=488991
have fun
I've got HD Tweak but changing the settings for sleep to off doesn't make any difference.
Also have Touch In call tweak - its a good program but would prefer not to use too many programs and if pocketshield can do the same thing I'd prefer that.
I'm using Duttys 6.1 ROM is this anything doing with HD tweak not working? Does anyone know the registry key to change the screen going to sleep on making a call?
Thanks
disable light sensor
Can anyone help with the registry edits to disable the light sensor.
thanks
grantus said:
Can anyone help with the registry edits to disable the light sensor.
thanks
Click to expand...
Click to collapse
Code:
HKCU\ControlPanel\AllLEDMgr\LightSensorPollingEnable
Worked fine, thanks for the help.
egoist6 said:
Code:
HKCU\ControlPanel\AllLEDMgr\LightSensorPollingEnable
Click to expand...
Click to collapse
how do i go to registry edits??
j.o.i.d said:
how do i go to registry edits??
Click to expand...
Click to collapse
Use your registry editor regedit.exe, should be one already on your rom. If not on your apps list try in /windows
egoist6 said:
disable light sensor
Click to expand...
Click to collapse
will this tip affect only while on call?
thx
I use:
Touch_InCall_Screen_Tweak v1.1.2.CAB
When holding the HD vertical the screen is dark en doesn't react to touching.
When you hold your HD horizontal the screen is active and can be used as normal.
This works only when a call is active.
Good luck!
(same advice as rambo12345)