there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)
Related
Hi,
I've owned the Xperia for a week and it's a great WinMo device. However unlike Touch Pro or Diamond, there's no registry tweak available to turn off the auto wake up on new sms feature.
I found it really annoying. Everytime a new SMS arrived when the phone was in my pocket the screen automatically turned on, and as I was walking my jeans' pocket continuously "touched" on the phone screen and accidentally opened bunches of programs and scroll up and down until it hanged.
It will be perfect to just make sound + vibrate, but keep the screen off, as I could do on Touch Pro.
Anyone knows of such a solution please do help!
I need to bump on that...
hmmmmmmmmmmmmmm
aint advanced config 3.3 working for that?
I was having this problem too... the only thing I changed to attempt to fix this was instead of pressing the power button to sleep the phone before I put it into my pocket, I press and hold the end key so that it locks the phone and dims the screen. The screen eventually turns off and it requires you to unlock the phone when you power it back on. When you receive an SMS or Email, the screen still lights up, but you have to press unlock, then tap unlock to start using it.
Yes, I have the same problem too and hope we can have the option to turn it off so that the screen will not lighted up when there is new sms or call.
Can someone work on this?
The registry key used for the tweak that works on Touch Pro does not exist, which is HKLM\Drivers\BuiltIn\RIL
smaberg said:
aint advanced config 3.3 working for that?
Click to expand...
Click to collapse
That option is for Touch Diamond and Touch Pro only, and it does not show on Xperia when you use Advanced Config. It's obviously related to the registry key mentioned above.
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Has anyone tried this out to see if it works...???
Cheers
SE-Naz said:
Has anyone tried this out to see if it works...???
Cheers
Click to expand...
Click to collapse
I have tried it myself and it works, I don't have to worry that I might press anything on the screen when there is incoming SMS.
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
SE-Naz said:
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
Click to expand...
Click to collapse
Not sure about yours but I do not have this key so I have to create a new one and it is working.
I need to create it...
Does it need to be where the
HKCR
HKCU
HKLM
are???
Cheers
Sorted now and working well...
Thanks again
Put it in HKLM.
However Resco registry give me an error and doesn't create this dword. Very very strange...
chongbh said:
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Click to expand...
Click to collapse
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Just added this feature in my application XperiaTweak!
hutch said:
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Click to expand...
Click to collapse
Using your Registry Explorer an go to the below location :
Location in Registry : HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Select "New" D_Word and you will be asked to enter the details :
Top portion just enter : DisableSMSWakeUpEvent
and bottom portion just enter the value : 1
Save it and you should find the details there :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
For easier way, you can download the latest Xperia Tweak and it include the option to turn off the screen for any incoming sms.
http://forum.xda-developers.com/showthread.php?t=440035
Confirmed Work!
I can confirm this solution works perfectly! I thought if the value does not exist means the device does not support it. Thanks chongbh!
I have seen this bug since the initial days of the X1. Recently after upgrade to the R2 version the problem still exist.
I just have the following things installed in the phone:
Xperia tweaks
David Andrs Batti
Facebook panel
A_S S2U2
A_C S2V
HTC TOuchflo 3D HD Beta 2
Pubba TouchFLO 3D Panel
HTC Enlarge Start Menu
HTC HTC Volume
I always use the TF3D as my defaul panel. I simply love the interface.
The issue is when the phone comes in nothing happens when i press the ANSWER button. I can reject the call but cant answer it. I need to restart the phone and things are fine again.
I think the culprit is
S2U2 or TF3D.
P.S. In s2us i dont use the slide to answer fuction.
Someone else has similar issue.
Its really irritating.
I would blame TF3D because it's the only thing you seem to have on your phone which is known to cause problems.
S2U2 works fine here, but maybe you have something done wrong in the S2U2-settings.
Try setting everything off except:
- Lock when device wakes up
- Power Save mode
- Safe mode
- Display Mode: DirectDraw
Also be sure you have the latest version installed www.ac-s2.com
moleculez said:
I think the culprit is
S2U2 or TF3D.
Click to expand...
Click to collapse
Have you tried a hard reset and then not installed either (and possibly nothing else) for a few days to see if indeed it is a software issue and not a hardware fault?
it happens to me too
by any chance, do you have your phone in a pouch and then when you take it out, it switches to landscape mode from portrait and then you can press anything? thats what happens to me...
Actually I've experienced the same issue and I've posted in the Official S2U2 thread.
My thoughts is that S2U2 is the culprit, because I don't even have TF3D installed (nor ever did). I have been wrestling with trying to fix it for the past 3 hours, and I've come up with nothing!
I have seen this before and I think it is the way that the official WM caller ID tab works. It seems to always want to 'fight' another program for focus. S2U2 has a difficult time with the first call (also the first time the WM caller ID tab makes it's first appearance), but after a restart/reload of iLock2.exe, everything is fine for me.
This really sucks because I've had to resort to the default caller ID tab so that I don't miss anymore calls!
If you think thats a issue let me try setting up S2U2 to SLIDE TO ANWER option and see if it works for me.
Hi all...
i use s2u2 from long time on all my htc devices and this time ive to report a little issue, vey little for true...
sometime, generally after pc connection or bluetooth headset connection, but also without using usb connection at all, ive the headset icon showed and it disappears only if i connect-diosconnet the wired headset.
anyone with this problem? i repeat, not a big problem, but very boring...
possible to solve?
thx you!
no one with this problem?
davidebeatrice said:
Hi all...
i use s2u2 from long time on all my htc devices and this time ive to report a little issue, vey little for true...
sometime, generally after pc connection or bluetooth headset connection, but also without using usb connection at all, ive the headset icon showed and it disappears only if i connect-diosconnet the wired headset.
anyone with this problem? i repeat, not a big problem, but very boring...
possible to solve?
thx you!
Click to expand...
Click to collapse
same thing here. seems like it started with me after I used my s9 bluetooth headset. when I used my wired set, I don't think this happened.
I have the same issue, but it doesn't have any consequences for me.
Another issue I do have with S2U2 is when I make a call via a bluetooth headset, the keypad disables and it happens often that keys are pressed while the phone is in my pocket after I made a call. Haven't found a setting that disables this either.
i tried to install it but i get the error that it is not signed and therefor not running.
i looked up everything here but there is so much on S2U2 that i dont know what to install in wath order.
-go here and download the wvga version and the language pack.
-extract the s2u2 cab file in your memory card and the correct language file.
-install the cab in your tp2 (not in the memory card), rename the language file (i.e. lang.english.ini->lang.ini) and copy it into \programs\s2u2 folded (when asked click on replace existing file).
-reboot.
when windows starts a popup appears and s2u2 starts for the first time. so you can now set it up in s2u2 setting (wallpaer, ecc...)
thx dude for the lightning fast response
you're welcome...solved?
yep, just ninstalled it and works fine.
one more issue...
S2U2 is not picking the weather from HTC's weather panel... wht do u think is wrong?
thx....
mine shows weather correctly...have u selected touchflo3d in s2u2 settings?
...have you downloaded the weather for the location and have you setting up the gmt time for the same locatioon in home tab?
to show weather correctly weather tabs must shows the same location as gmt time.
sorry for my English...
the seven options for weather that s2u2 1.62 gives me are
Off | SPB Weather 1.x | Weather Panel | Pocket Weather | HTC Home Weather | UserWeather | Manila 2D Weather | Manila 3D Weather
I selected both Weather panel and HTC Home Weather, none seem to work.
Yes, tocuflo3d's weather panel has downloaded the latest weather updates...
my home location and time are correct too...
thx....
EDIT: I tried Manilla 3D and its working! .... hmm.... is tht its name?....
yeah!
Hey I just installed S2U2 cause I needed a good locking program but for some weird reason and multiple installations, uninstall and soft-resets, I'm still not able to get the slide to unlock work.
I mean i get the screen with the time and all just the slider isn't there.
i have tried many skins but still no go.
Is there a solution I don't know?
thanks for your help.
yadvani said:
Hey I just installed S2U2 cause I needed a good locking program but for some weird reason and multiple installations, uninstall and soft-resets, I'm still not able to get the slide to unlock work.
I mean i get the screen with the time and all just the slider isn't there.
i have tried many skins but still no go.
Is there a solution I don't know?
thanks for your help.
Click to expand...
Click to collapse
In the S2U2-Settings, set the following values (beside the others you want, of course):
Hide all softkeys: OFF (This is the value that hides the slider)
Display mode: GDI (Otherwise the screen would be scrambled sometimes when you change the orientation)
skycamefalling said:
Display mode: GDI (Otherwise the screen would be scrambled sometimes when you change the orientation)
Click to expand...
Click to collapse
Thank you for that! I was wondering why that was happening!
dazultra2000 said:
Thank you for that! I was wondering why that was happening!
Click to expand...
Click to collapse
It won't go completely away by this but it's much better than with the other display driver modes.
If you find a definitive solution for this problem, please let me know
skycamefalling said:
In the S2U2-Settings, set the following values (beside the others you want, of course):
Hide all softkeys: OFF (This is the value that hides the slider)
Click to expand...
Click to collapse
Thanks works perfectly now
A-C posted a new version...
go here
...headset isuue always present...
Would someone lucky enough to actually own a HD2 already
(thursday 6th Nov. 2009)
try out the http://s2u2.ac-s2.com/ SLIDE 2 UnLock v2 version (free)
This app will give you full screen photos when someone is calling you,
has a very nice homescreen with SMS, Email,Weather and all.
On the 6.5.1.ROM's on the HD it doesn't work well anymore.
Please test this on HD2.
File is attached from http://s2u2.ac-s2.com/
Hmmzz cannot attach the file even tho filesize is < OK
lucid said:
Would someone lucky enough to actually own a HD2 already
(thursday 6th Nov. 2009)
try out the http://s2u2.ac-s2.com/ SLIDE 2 UnLock v2 version (free)
This app will give you full screen photos when someone is calling you,
has a very nice homescreen with SMS, Email,Weather and all.
On the 6.5.1.ROM's on the HD it doesn't work well anymore.
Please test this on HD2.
File is attached from http://s2u2.ac-s2.com/
Hmmzz cannot attach the file even tho filesize is < OK
Click to expand...
Click to collapse
I would want to try it, but I don't see why it's usefull.... The Windows 6.5 Slide to unlock works very good!
xmoo said:
I would want to try it, but I don't see why it's usefull.... The Windows 6.5 Slide to unlock works very good!
Click to expand...
Click to collapse
But you can't see "Tasks" with the Windows 6.5 Slide to unlock !...
Noam23 said:
But you can't see "Tasks" with the Windows 6.5 Slide to unlock !...
Click to expand...
Click to collapse
That is correct, will think about it, and will try mayb when I get back @ home.
disable hardware keys
S2U2 works fine on my HD2 (though I don't use the CallerID function).
The only problem is that all hardware keys (except volume) wake up the phone. And worst, a long press on on-off key start the power-off panel (quite troublesome given that you can shutdown the phone accidentaly in your pocket).
Someone has a solution ?
superfougere said:
And worst, a long press on on-off key start the power-off panel (quite troublesome given that you can shutdown the phone accidentaly in your pocket).
Click to expand...
Click to collapse
I think it's ridiculously unlikely that that will ever happen! Do you keep random button pressing machines in your pockets?
I've had mine for 2 weeks now, and it's not even been out of standby mode when I've taken it out of my pocket, ever.
xmoo said:
I would want to try it, but I don't see why it's usefull.... The Windows 6.5 Slide to unlock works very good!
Click to expand...
Click to collapse
Apart from the fact that wm6.5 slide to unlock doesn't show all day appointment
By the way s2u2 works fine to me.
johncmolyneux said:
I think it's ridiculously unlikely that that will ever happen! Do you keep random button pressing machines in your pockets?
I've had mine for 2 weeks now, and it's not even been out of standby mode when I've taken it out of my pocket, ever.
Click to expand...
Click to collapse
I've had the problem of power-off panel yesterday, that's why I ask this question.
And the problem for the other hardware key is that it is battery draining to have the screen on (and I don't wear baggies, thus it happen quite regurlarly)
Already installed on my HD2 very nice, anyone know how to disable the slider lock of origin HD2?
Look at the sticky "Leo hints and tips" item 27 Disable Auto Screen Lock
You can disable the original slider with the cab in this thread:
http://forum.xda-developers.com/showpost.php?p=4996782&postcount=2961
Also all day appointments is an option in the settings you need to enable!
S2u2 Works perfectly for me BTW, on HD2
bakskj said:
You can disable the original slider with the cab in this thread:
http://forum.xda-developers.com/showpost.php?p=4996782&postcount=2961
Also all day appointments is an option in the settings you need to enable!
S2u2 Works perfectly for me BTW, on HD2
Click to expand...
Click to collapse
thanks, you make my day.
i'm using this cab: S2U2 QVGA/WQVGA version
is the one to HD2? i think so.
pack21 said:
thanks, you make my day.
i'm using this cab: S2U2 QVGA/WQVGA version
is the one to HD2? i think so.
Click to expand...
Click to collapse
You're wrong, get the VGA/WVGA for HD2
superfougere said:
The only problem is that all hardware keys (except volume) wake up the phone. And worst, a long press on on-off key start the power-off panel (quite troublesome given that you can shutdown the phone accidentaly in your pocket).
Someone has a solution ?
Click to expand...
Click to collapse
You are right. S2U2 lacks a quick resleep function (which is present in TouchLockPro). When TouchLockPro has fixed the G-sensor detection, I think it is way better than S2U2 in terms of locking (except that it doesn't have the sexy interface). I don't really care what it shows on the screen when it is locked.
No, with S2U2 active, I can't long press the end key to turn off the phone without first slide-unlocking.
Fortunately, the panel is still locked after HD2 is waked up by a hard key. At least it won't be sending mails or dialing phones in your pocket.
superfougere said:
And worst, a long press on on-off key start the power-off panel (quite troublesome given that you can shutdown the phone accidentaly in your pocket).
Click to expand...
Click to collapse
Thats not true. With the newest version that doesn't happen. I tried to replicate the behavior and nothing...
Ive asked this question on another thread but has anyone noticed a problem with caller ID, if the image is from a linked facebook profile it doesn't show up when someone calls.
monty_rm said:
Ive asked this question on another thread but has anyone noticed a problem with caller ID, if the image is from a linked facebook profile it doesn't show up when someone calls.
Click to expand...
Click to collapse
for caller id pics u need s2v and add contact pics from it
MerLinh said:
for caller id pics u need s2v and add contact pics from it
Click to expand...
Click to collapse
The pictures aren't actually on the phone though, they are just retrieved from facebook. Is there any way you can get S2V to utilise them?
monty_rm said:
The pictures aren't actually on the phone though, they are just retrieved from facebook. Is there any way you can get S2V to utilise them?
Click to expand...
Click to collapse
well in that case you have to download them, get a nice fullscreen image, believe me its very impressive when someone calls you and its pic is fullscreen and clear
Bit of help please:
Do I have to uninstall S2U2 Version 1.62 before I install Ver 2.24 please?
Or can I just install ver 2.24 over 1.62?
Thanks
Hi Folks,
I´m still looking for a way to disable the hardware-keys while the devide is in sleepmode. Only the Powerbutton should wake up the device. And also only the screen-slider should answer or dismiss an incoming call....
I cant believe that there ist still no solution for this problem....
And please dont answer me with: use s2U2 or other 3rd Party stuff... there must be an other way to do so
Candy-men said:
Hi Folks,
I´m still looking for a way to disable the hardware-keys while the devide is in sleepmode. Only the Powerbutton should wake up the device. And also only the screen-slider should answer or dismiss an incoming call....
I cant believe that there ist still no solution for this problem....
And please dont answer me with: use s2U2 or other 3rd Party stuff... there must be an other way to do so
Click to expand...
Click to collapse
you have to.
I'm also interested in this. Why wake up the phone with another button then the one who put it in sleep in first place. I find it strange. Like if I put the light off in the kitchen then opened the fridge the kitchen light will come on. who would like that ???
Can someone find a solution for this I search everywhere with no satisfying result.
I newly updated my Topaz from 6.1 to 6.5.3 and I can't recall that I had this problem in 6.1 and i had 6.1 for over 1 year.
I would say that this issue has nothing with screen lock to do it's rather an issue with wake-up (What shall wake up the phone from sleeping status : a call, sms, mms, mail, hardware key, power button etc...)
Just when I decided to post my problem I found it's solution:
Set HKEY_CURRENT_USER\ControlPanel\Keybd\DefaultKeyLock to 0.
Now nothing wakes-up the phone except the power button.
I found a cab posted also here is the link : http://forum.xda-developers.com/attachment.php?attachmentid=246722&d=1258236796
found on page : http://forum.xda-developers.com/showthread.php?t=581531&page=2
posted by : triperko http://forum.xda-developers.com/member.php?u=393396
i´ve made the changes in the registry, but still every button wakes up my device. So this "tweak" won´t work for me
Well I know after posting for about 3 - 4 hours I got the problem back myself not understanding what I have done to get the problem back. Yesterday evening I spent all night trying to figure this out. I have CHT Lock screen enable + BharS_OBOE_Lock_Disable.Cab. I need this cab because I have Huashan lockscreen built in my rom. And the cab allows me to use the CHT lock screen. To solve my problem I have done the following:
1) Disable CHT lockscreen
2) Uninstalled the Cab
3) made sure the registry setting was there and problem solved.
3.1) reinstalled the cab
3.2) enabled the CHT Lockscreen
Still working...
4) Went to power option the win 6.5 setting just to take a look (didn't change a thing)
5) Problem returned.
Start all over again to solve my problem.
For now on I'm staying out of the power option in win 6.5 setting.
There is nothing you can do there anyway until CHT lock screen come with an option for enabling password on lock.
I'm sorry I don't have any scientific explanation for this. But till now I can say I have solved my problem hope it solves yours
I'm using WWE"Topaz Roms + Kitchen"Build 23130/21914"Manila 2.5.20182814.0"(August 20th)
No, this couldn´t solve my Problems, because i use CHT 1.6.1 and this version doesn´t have any Lockscreen options.
The real Point that i can´t understand is: This is still a WinMo 6.5 Version, why is the Menue-point : Lock all buttons except Power on/off not there?
There must be a way to get this point back. I can´t belive that we have an extra written WinMo Version for the HD2...
So, where is the registry setting to get back the point?
+1000
I also hate this problem with HD2 FYI. I had already opened a post on this a few weeks back.
http://forum.xda-developers.com/showthread.php?t=694109
Have your tried uninstalling CHT making sure the reg key above is set and Test ?
this needs to happen... any key to wake is just silly! and on a related point, only the on-screen slider should answer/reject an incoming call