Is not a valid pocketpc application - XPERIA X1 General

I downloaded a lot of windows pocketpc applications for my Xperia and none of the worked... The following message comes up: "Is not a valid pocketpc application"
I had a lot of 2003, windows 5, and 6 applications, and games and they cant install or open!
How can I fix this?

RE:
Did you just copy the applications straight to your Xpreia then run the files? If so, you need to run most pocket apps on a PC first, then when you connect your Xperia to a PC then a window will pop up showing you the applications that need to be installed onto your Xperia. This is all Automatic, as long as you have installed the Phone onto your PC.
Hope this helps.
Joel

Yeah, that's the only real stupid crap on WM.
I could install any app on Symbian right on phone.
Why the hell they don't make all .CAB's??
I understand with big files, but with 100kB thing is plain stupid,
the whole idea of mobility dies with this.
P.S. I also have some apps like that, so what do I do?
Install it first on PC? And than what, uninstall it after installing on phone??

If you have it "install" on your pc only, it always leaves a .cab file somewhere to be downloaded to your phone later. That's how I extracted the CAB files from the executables I have anyway.

99% of apps can be obtained as cab. Only few I had to install manually (ie there was no CAB or PC EXE installer).
Most are avaialble also aso PC exe, but if someone bothers with EXE installer, he usually has CAB too (in fact he has to, since the PC installation shows some funky windows and then it simply copies the CAB to WM device).
Which is also where you can get the CAB. Unpack the EXE installer (very often possible, Total Commander can do that for example), locate the CAB inside it, and install the CAB manually.

Dr.Sid said:
99% of apps can be obtained as cab. Only few I had to install manually (ie there was no CAB or PC EXE installer).
Most are avaialble also aso PC exe, but if someone bothers with EXE installer, he usually has CAB too (in fact he has to, since the PC installation shows some funky windows and then it simply copies the CAB to WM device).
Which is also where you can get the CAB. Unpack the EXE installer (very often possible, Total Commander can do that for example), locate the CAB inside it, and install the CAB manually.
Click to expand...
Click to collapse
So you had plain luck,
50% of the apps which I want are these f**n .exe. Without any .CAB inside.
But I still didn't get how is the standard operation from PC.
What do I do first? Install the .exe on my computer and than connect phone? And what than?

sync your mobile with activeSync, install the application through pc, activeSync will start the installation on your mobile

Connect the phone to the PC via ActiveSync.
Run the exe on the PC. It installs on PC and copies the cab installer to the phone via ActiveSync. The phone should start the installation automatically.

I still wonder .. what applications are those ?

on8a said:
Connect the phone to the PC via ActiveSync.
Run the exe on the PC. It installs on PC and copies the cab installer to the phone via ActiveSync. The phone should start the installation automatically.
Click to expand...
Click to collapse
Great, thanks guys for replies.
I assume while installing I can choose the place of installation (phone/card....)
P.S. Can the .cab installer stay on device, for quick reinstall after upgrade?
Or you have to connect to PC again?

Related

T-Mobile MDA compact with PocketPC platform can't run .exe

This is my first post and I have looked around but it seems no one has the same problem with me or I could miss something.
I just got a MDA compact from T-Mobile UK. I wanted to install some applications but I can only use .CAB files. When I tried to execute a .exe file it says "'file_name' is not a valid Pocket PC application". After that I found out my MDA using Pocket PC platform.
Question is how I can use those .exe files. Would upgrading ROM help?
If they are the correct .exe programs for Pocket PC 2003 SE then I believe they can be installed via ActiveSync.
Someone correct me if i'm wrong.
Re: T-Mobile MDA compact with PocketPC platform can't run .e
syhung said:
Question is how I can use those .exe files. Would upgrading ROM help?
Click to expand...
Click to collapse
By far the most .exe files you can download from the Internet for a PocketPC are actually installers that need to be run on your desktop PC, not on the PocketPC itself. Make sure your PocketPC is connected to your PC and ActiveSync is running, then try starting these .exe on your PC.
If your desktop machine is a Mac or any other non-Windows PC, you are out of luck basically - then you need to ask someone with a Windows PC to run these .exe for you, grab the extracted .cab from some temporary directory, and give those to you.
Cheers
Daniel
Just for the sake of completeness, you cannot install Smartphone software on a Pocket PC, despite the similarly-named OS :wink:
misunderstanding
so far that I know, exe can only be executed on the desktop pc. while cab files u can executed it in ur pocket pc.
Omg...I'm so dumb...
Thanks a bunch guys

Programs or Games will not install

Hi all,
Having a spot of trouble trying to install anything onto my MDA Vario, I generally search for WM5 software/games and everytime I try to install I get this message.
XXXXX is not a valid pocket PC application
Any clues?
Thanks
Sounds like your installing an exe that needs to be installed via pc using activesync. You can download activesync from the M$ website. The latest version is 4.2 as far as i know.
If you are downloading exe files, try opening them on the pc first. Most of the exe files are installation files that need to be executed from the computer. Some, very few, are actually compiled executables that only have to be copied to the PPC and run from there.
You will also come across CAB files. These files are my preference because you just copy them to the PPC and execute it there, and it installs the files right on the PPC.
Had a problem running activesync, it used to loop my pc when I attached the device. Since then I reinstalled XP Pro OS and reinstalled activesync (probably old version conflicting)
It now works a treat and loads up all my software!
Many thanks

Mac support

I am looking for a way to sync ical with my tasks and appointments on my phone. Ive found software online and whatnot, but nothing for 5.0. anyone know of anything? I would really appreciate it.
Missing Sync for Windows Mobile
I'm using Missing Sync for Windows Mobile on my OS X MBP. It works great and you can install .cab applications with it as well. Unfortunately you still need a windows machine/install to install the .exe stuff but I've found most software vendors for PPC apps supply a .cab install option now as well.
http://www.markspace.com/missingsync_windowsmobile.php
cool ill track down a PC and try it out. THanks!
You won't need a PC to install Missing Sync, it's a Mac universal binary. What I was speaking of are applications for the PPC device that require you to run an executable on a host PC (windows) to then install the application on to your device. However I just found this on another forum and I think I'm going to give it a try.
File Juicer - one of the features is "Extract CAB files from Pocket PC self installing EXE files" once you have the .cab you can install the application via missing sync.
http://echoone.com/filejuicer/
oh I think i found this once, but 40$ and no trial scared me...

Problem with installing .cab files

I have no idea what is happening with my blue angel everytime i try to install sth i get error: instalation of(name of cab file) was unsuccessful. And the second problem is with activesync - i cant sync my BA with PC but I can explore my BA through it.
what do you exactly tryin to install to your BA? please specify it.. not always any applications compatible to our wm6'ed BA
ok: resco explorer 2007, card export II spb pocket plus wibar & a lot of different appz
Tomzik87 said:
I have no idea what is happening with my blue angel everytime i try to install sth i get error: instalation of(name of cab file) was unsuccessful. And the second problem is with activesync - i cant sync my BA with PC but I can explore my BA through it.
Click to expand...
Click to collapse
Your first task should be to set right ActivSync as that plays a vital role in transfering files to BA. Uninstall existing version on PC and install a fresh 4.5 or later version. Then connect BA to PC through USB, PC should recognize your BA and ask for partnership. Go and finish that. Once you have a clean installation of activsync on pc and you have establised the partnership between pc and BA thru ActivSync, try to synch your data with PC.
Your next step should be to install programs. Create a folder "Cabs" on Storage card and through explore of ActivSyc, copy cabs to this folder. Later on, look a the files through File Explorer and double click each cab file to install them.
Hard reset helped with both problems.
Tomzik87 said:
I have no idea what is happening with my blue angel everytime i try to install sth i get error: instalation of(name of cab file) was unsuccessful. And the second problem is with activesync - i cant sync my BA with PC but I can explore my BA through it.
Click to expand...
Click to collapse
I'm too, the same problem some one know about this, Pls show me the relution. May be downgrade to WM2005.
What about Tomzik87's last proposition?

CAB "Installation Unsuccessful"

Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Can anyone help? Please?!?
Same here... and i'm going mad. Seems this issue affects random cabs. I succesfully installed your same TomTom version, but I can't install G-sensor Calibrate, or even TotalCommander...
I tried to update to Project V3.3 but issue is still there with the same cabs.
Any ideas?
I also tried disabling security warning by using Schap's Advanced Config. Nothing changed.
random
as you said it is a random effect... same prb here.... but i saw something odd...
i downloaded a cab with opera installed on htc and selected "open" when it asks what to do with the file... download complete but instalation unsuccessfull.
i've downloaded the same file but saved it on the storage and after that i installed... and surprise it worked! maybe it is a memory prblm.... i don't know!
this method does'nt work with every cab
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
parlato_edoardo said:
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
Click to expand...
Click to collapse
no... just using opera from the diamond
Same problem here... I have some CABs which dont fail and some which fail... Very anoying problem
I confirm i solved my problems by downloading WITHOUT any download manager or download accelerator all cabs on my pc, then check them with 7zip, then copy to my Diamond and install.
It's a bit strange way to get cabs installed but it's a safe method.
You can also choose to use download managers or download with your pda to download cabs, but you have to check them later if they don't install and... re-download them.
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
thedino said:
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
Click to expand...
Click to collapse
I have the same problem when the device - an o2 XDA Diamond - is connected in "Disk Drive" mode.
Whenever I transfer files from a Windows Server 2003 system (w/o Service Pack) to the "Internal Storage" of my Diamond the files become corrupted on the device.
This happens with any file type, but only with larger files - they become corrupted when they are several megabytes in size.
This doesn't happen randomly, it happens every time.
Reading large files from the "Internal Storage" works without problems.
When I transfer the very same files from a Windows XP system then they are OK on the device.
Also when I transfer the files in "Active Sync" mode the files are OK, but the "Active Sync" transfers are randomly aborted and the sync is lost.
I knew I'm not the only one with that problem, but I never found any information.
The ROM is the newest official one, 1.93.207.2.
Of course the Windows Server 2003 system transfers large files to other flash storages - camera, card reader and other Pocket PCs - without any problems.
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Sorry, doesn't work for me, but I thought that it was clear. (Because I wrote all info, like Service Pack, etc.)
buffystar said:
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Click to expand...
Click to collapse
You dont understand this... The file is corrupted while transfering via USB Drive but OK if we use ActiveSync... We know how to install CAB files. there is not problem.
BTW, I have Win2000 so it might be same as mentioned 2003...
I will try on another system and see how it works.
I just installed Windows XP SP3 on my machine: SAME PROBLEM!!
thedino, what mainboard do you have and how old is it and what is its USB version (1.0, 1.1, 2.0)? I have a K7S5A with USB 1.1.
For now I have to assume that HTC produced crap and that I'm gonna send my Diamond back.
I bought an USB card for PCI and there is no problem when connecting the HTC Diamond to this card.
No data corruption at all.
So obviously it must be something with onboard USB chipsets, but it's definitely a problem on HTC's side,
else these onboard USB chipsets wouldn't work correctly with any other USB device.
jameshpg said:
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Click to expand...
Click to collapse
I had the same problem (either "installation unsuccessful" or just gets stuck during installation). I was using changescreen v2.5 for handling the display rotation. Apparently this software has a conflict with the .cab installer. It was enough to disable changescreen, then run the .cab, then re-activate changescreen again.
Hope that this helps.
maTTeo
Temporary Fix
Try this
Rename the cab file with a different extension, eg TotalCommander.cab to TotalCommander.txt. Do this on your computer.
Select the file within Windows Explorer and do the usual "Edit -->Copy" to copy the file.
Establish ActiveSync connection with your Diamond and using "File Management" select the Internal Storage of your Diamond. Then select "Paste" to paste the file into the internal storage of your DIamond. Rename the file back to having the .cab file extension by using the explorer shell you opened through ActiveSync.
Unplug Diamond from the USB and ensure ActiveSync on your Diamond is not active. Using file explorer program on your Diamond tap on the cab to install it.
The only alternative is uninstall all extra apps you have put on one by one and try to install other cabs as some of these may conflict with the cab install OR you can update your ROM from the 1.93 series to the 2 series.
Let me know if this temporary fix works. Best of luck.
Aussie

Categories

Resources