Are there any non glossy rubberized replacement back cover for the touch pro? I hate the current one...
My Touch Pro has a rubberized non-glossy back out of the box. Not yours?
I'd like a replacement back that is fully flat, without the "diamond" facets though.
Mine has a fully flat back, from o2 UK. I think Vodafone UK has a Diamond style angluar back, though.
Aar0n said:
Mine has a fully flat back, from o2 UK. I think Vodafone UK has a Diamond style angluar back, though.
Click to expand...
Click to collapse
I'd love the flat back like the O2 one but apparently they're not interchangeable, there are other differences in the case.
Here's one thing you could try to hold ya over till the rubber back comes out. What I did was to take car wax and wax the back of my Fuze. It's still a finger print magnate but it is not as noticeable and cleans easier. Also, for some reason it is not as slippery and grips a little better.
It's a fuze. Will the original touch pro back cover fit on it?
Ayle said:
It's a fuze. Will the original touch pro back cover fit on it?
Click to expand...
Click to collapse
If you compare the pics here, you'll see that the sides of the case are different. So I doubt it'll fit.
Related
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
I've been looking and I want A Seidio innocase but they're not in production yet.So are there any good ones yet?
Daikazetatsu said:
I've been looking and I want A Seidio innocase but they're not in production yet.So are there any good ones yet?
Click to expand...
Click to collapse
Just turned in my Diamond for a Pro and have ordered a Krusell leather belt clip case for it. Had one on my Diamond and it was very good. Another is the Noreve cases. Both very good quality. Prefer a case to a skin.
Pouch from PDair
I have ordered and still waiting. It takes about 2 weeks to reach Malaysia as what they mentioned.
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000489
By skin I Meant those rubber or silicone one.Not the graphic kind
vyap said:
I have ordered and still waiting. It takes about 2 weeks to reach Malaysia as what they mentioned.
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000489
Click to expand...
Click to collapse
Which model did you order? How much bulk does it add to? Would like to order to be send to M'sia. let me know how long it takes when you get the case.
willbeh said:
Which model did you order? How much bulk does it add to? Would like to order to be send to M'sia. let me know how long it takes when you get the case.
Click to expand...
Click to collapse
Leather Case for HTC Touch Pro - Flip Type (Black)
Car Mount for PDair Leather Case
Both items at USD40, No additional charges as what been mentioned.
Will provide additional info when I get both items.
Proporta Alu-Leather Case - Flip Type : Link
Proporta Maya Case : Link
HTC Pouch S280 : Link
HTC Pouch S322 : Link
PDair Leather Case for : Link
Beyzacases UniSR VS1 Leather Case : Link
Pielframa : Link
CarryMobile : Link
PDAir : Link
Krussel : Krusell HTC Touch Pro
vyap said:
I have ordered and still waiting. It takes about 2 weeks to reach Malaysia as what they mentioned.
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000489
Click to expand...
Click to collapse
I believe what you ordered is branded Monaco
http://www.wirelessground.com/htctouchpro.html
http://www.touchdepot.com/monaco-book-type-leather-case/4A22A3889.htm
both have the product. Let me know how well it works, I really want to get one.
($24USD from wirelessground)
Careful!!!!!
Guys, be careful with those flip leather bags!
I'm having really bad experience with this one. It has a sheet of protective foil (0.5 mm thick) over the keyboard, so when the screen is closed, this foil is pushing the screen away from the keyboard.
One week of using this crap bag and now I can actually pull the screen away from the keyboard 1mm or so (left side in closed position). And when I shake the closed phone holding the keyboard, i can see and hear the screen flapping.
Apparently the hinges are not stable enough to resist any objects between them. I don't see a way of tightening them up myself. (Although I'm pretty do-it-myself guy, don't feel like taking this thing apart without instructions).
So I'm just getting myself an aluminium case, at least it won't get worse, 'cause the screen and keyboard are allways fixed against each other.
And I strongly recommend you consider whether you want to ruin an expensive unit with a cheap bag.
I add this one. It's a high quality leather case.
A little bit expansive but i'm so glad to have it, it's really good.
I really want this case, but does anyone know of a side case that exposes the miniusb, so I can plug in my headphones
Kraize92 said:
I really want this case, but does anyone know of a side case that exposes the miniusb, so I can plug in my headphones
Click to expand...
Click to collapse
Cut it out, if they dont make them that way DIY
xboxhaxorz said:
DIY
Click to expand...
Click to collapse
I'm trying to. No idea how. Just cut open the leather?
slimeSickle said:
Guys, be careful with those flip leather bags!
I'm having really bad experience with this one. It has a sheet of protective foil (0.5 mm thick) over the keyboard, so when the screen is closed, this foil is pushing the screen away from the keyboard.
One week of using this crap bag and now I can actually pull the screen away from the keyboard 1mm or so (left side in closed position). And when I shake the closed phone holding the keyboard, i can see and hear the screen flapping.
Apparently the hinges are not stable enough to resist any objects between them. I don't see a way of tightening them up myself. (Although I'm pretty do-it-myself guy, don't feel like taking this thing apart without instructions).
So I'm just getting myself an aluminium case, at least it won't get worse, 'cause the screen and keyboard are allways fixed against each other.
And I strongly recommend you consider whether you want to ruin an expensive unit with a cheap bag.
Click to expand...
Click to collapse
Agreed, I personaly refused to use that type of case after seeing another touch pro flapping after it got taken out its case. Mines thankfully has never been in such case and is still like new. Avoid may well be the best advise. However it does limit what you can pick though. I use the HTC sleve, and then put that in my mini s belt case. A bit bulky, but until a good solution comes about, it'll have to do.
I too use the sleeve that comes with it but my problem is when I keep it in my pocket , sometimes when I receive a call , it answers on its own , very irritating
leigo said:
I believe what you ordered is branded Monaco
http://www.wirelessground.com/htctouchpro.html
http://www.touchdepot.com/monaco-book-type-leather-case/4A22A3889.htm
both have the product. Let me know how well it works, I really want to get one.
($24USD from wirelessground)
Click to expand...
Click to collapse
I received both items yesterday (31.10.08). Very nice and i like it.
3 dollars cheaper then the one's from PDAir (Aluminium case). Regular price 39,95 Fall sale my ass
Technocel case at Sprint
Just got Touch Pro and new case from Sprint - rubberized and textured (like my Seidio case) - I LOVE It for $25 retail...ask for a discount on ur accesories!!!
willgagnon said:
Just got Touch Pro and new case from Sprint - rubberized and textured (like my Seidio case) - I LOVE It for $25 retail...ask for a discount on ur accesories!!!
Click to expand...
Click to collapse
did u order it from online .. my local store has nothing ...
http://nextelonline.nextel.com/NASA...ryID=ZCH6855R&topPageNumber=0&subPageNumber=0
i only see this one online.. leather coated .. not rubber and the lady stated that the clip looks like this :
http://nextelonline.nextel.com/NASA...yID=CBU2380_C&topPageNumber=0&subPageNumber=0
is this the one u have ... do u havea link on where to purchase it .. what disconnect did they offer u
hey, i'm lookin for a leather pouch type case w/ no belt clip like the one that comes with the european version of the touch pro. I would really like to have the soft cloth inside to clean the screen as well, any suggestions?
i have the sprint touch pro
I got my Fuze a couple of weeks ago but the glossy black panel on the back is already showing scratches. I would like to know if anybody knows a place where they sell replacements or if they make a rubberized one or not. I just ordered a case so it won't be much of an issue but I'm sure I'll need to replace it eventually. Any info on this would be greatly appreciated.
To anyone reading this thread and wondering, see this thread:
http://forum.xda-developers.com/showthread.php?t=444619
Yea I saw that but does that rubberized one fit this phone because it doesn't look like it from the picture and the clear plastic part where the camera/LED is located on the phone seems to small to fit over both on the Fuze. Just want confirmation that this cover fits on the Fuze. Thanks for the input.
MAN i really hope they come out with some aftermarket understated back covers. If the sprint version didnt have the ugly chrome trim id be all over it.
Couldn't agree more. I'd buy a "Tilt" like back cover for the AT&T Fuze in a heartbeat.
thedogger said:
Couldn't agree more. I'd buy a "Tilt" like back cover for the AT&T Fuze in a heartbeat.
Click to expand...
Click to collapse
Was Fuze's back some sort cheesy homage to the Touch Diamond?
dpittman said:
Was Fuze's back some sort cheesy homage to the Touch Diamond?
Click to expand...
Click to collapse
http://www.wmexperts.com/articleimages/2008/11/fuze/att-fuze-13.jpg
Fingerprint magnet & slides all over the place if you set it down on something & try to use it.
Yeah, got burned on ebay with some cheap a** styli, and now Im looking where to buy the original ones that come with the phone... any ideas?
I bought mine from MSG Digital:
http://www.msgdigital.com/productdetail.asp?productid=46813
Note, these are the HTC stylus for the HTC Touch Pro, not the Fuze, so they come with the matte black tip instead of the glossy black. But they are exactly the same, unscrew with the magnetic weight inside.
BBowermaster said:
I bought mine from MSG Digital:
http://www.msgdigital.com/productdetail.asp?productid=46813
Note, these are the HTC stylus for the HTC Touch Pro, not the Fuze, so they come with the matte black tip instead of the glossy black. But they are exactly the same, unscrew with the magnetic weight inside.
Click to expand...
Click to collapse
Do they fit perfectly on the Fuze, as the original did? I dont care about the color but I do care about the fitting.... I want them to look just like the originals one that my Fuze had.
Yes, the are exactly the same. The reason for the difference is the Fuze's back is the glossy one, while the original HTC Touch Pro has a rubber like backing, so these styluses are a matte black to match the rubber backing. Otherwise, they are the exact same weight/look.
Edit: posted some pictures. The last shows how its a different finish, but fits perfectly in the phone. (Phone has invisishield applied, so it has some dust/lint)
I use this site. http://cnn.cn/shop/
How 'bout the HTC accessorystore
http://www.htcaccessorystore.com/uk/p_htc.aspx
I got a spare stylus with my fuze.
Check your box, you should have a spare.
theomni said:
I got a spare stylus with my fuze.
Check your box, you should have a spare.
Click to expand...
Click to collapse
Lost both of them already... got a spare one from a friend of mine! But Im still looking for the OEM ones... will check the link to HTC accesory store that was posted.
Droga said:
Lost both of them already... got a spare one from a friend of mine! But Im still looking for the OEM ones... will check the link to HTC accesory store that was posted.
Click to expand...
Click to collapse
I have four of them (got extra stuff through warranty, and att let me keep all the duplicates ). If you want one, I could send you one in an envelope for $5
I've dealt with these folks from Canada ... here's the USA link:
Expansys
http://www.expansys.com/p.aspx?i=169458
Hello,
sorry for my stupid question, but does somebody know, where can I buy back black battery cover for HTC P4350?
On eBay and other servers I can only find blue covers for T-Mobile Wing
Thank you very much!
I am not sure how different your battery cover is to the wing in how it attaches but I can tell you the Wing/Atlas covers on eBay, etc... do come in black and fit very well. Again, not sure how your back cover compares to camera placement on the wing but that could be an option.
Thank you
So another question:
Does somebody know, if Wing/P4351 backdoor cover fits on HTC P4350?
They don't
I originally had a 4350. The back on it is both shaped and attaches differently than that of the Wing. I don't know why they changed it on the wing, and the back on the wing is held on by four of the tiniest little tabs you can imagine, and they break easily. If you ever insert the stylus at an angle, expect to break off the tab in that corner. Terrible design. The 4350s back cover covers only the battery area, and locks in place with a sliding switch. Never a problem with that one.
Ah, thank you very much dude. I was almost ordering Wing back door cover, now I know, that it won't fit. Thanks